Stimuli-responsive and self-healing supramolecular Zn(II)-guanosine metal-organic gel for Schottky barrier diode application.

Spontaneous formation of a supramolecular metal-organic hydrogel using unsubstituted guanosine as a ligand and Zn2+ ions is reported. Guanosine, in the presence of NaOH, self-assembled into a stable G-quadruplex structure, which underwent crosslinking through Zn2+ ions to afford a stable hydrogel. The gel has been characterized using several spectroscopic as well as microscopic studies. The hydrogel demonstrated excellent stimuli responsiveness towards various chemicals and pH. Furthermore, the gel exhibited intrinsic thixotropic behavior and showed self-healing and injectable properties. The optical properties of the Zn-guanosine metallo-hydrogel suggested a semiconducting nature of the gel, which has been exploited for fabricating a thin film device based on a Schottky diode interface between metal and a semiconductor. The fabricated device shows excellent charge transport characteristics and linear rectifying behavior. The findings are likely to pave the way for newer research in the area of soft electronic devices fabricated using materials synthesized by employing simple biomolecules.

Effect of Self-Healing by Dicyclopentadiene Microcapsules on Tensile and Fatigue Properties of Epoxy Composites.

Microcapsules of urea-formaldehyde (UF) containing dicyclopentadiene (DCPD) were synthesized by the in situ polymerization technique for self-healing of epoxy. The dispersion of microcapsules in the epoxy matrix was achieved using ultrasonication. Composites of epoxy, having 0.5, 1.0, 1.5, and 2.0 wt.% of microcapsules capable of self-healing, were prepared. The shape and size of the microcapsules were determined by field emission electron microscopy. Spherical capsules of DCPD, with an average diameter of 172 nm, were obtained. Investigation of tensile properties indicated a decrease in the tensile modulus with an increase in wt.% of microcapsules. There was a reduction of 22%, 27%, 39%, and 30% in the elastic modulus of composites for 0.5, 1.0, 1.5, and 2.0 wt.% of microcapsules, respectively. Tensile strength was found to increase with an increase in wt.% of microcapsules. The tensile strength of the composites increased by 33%, 20%, 8%, and 21% for 0.5, 1.0, 1.5, and 2.0 wt.% of microcapsules, respectively, in comparison with that of neat epoxy. The fatigue life of composites was investigated by conducting uniaxial tension-tension fatigue tests at constant stress amplitudes of 20, 25, 30, and 35 MPa, at a constant stress ratio (R = 0.1) and a frequency of 3 Hz. The fatigue life of composites increased with an increase in wt.% of microcapsules in comparison with that of neat epoxy. It was found that the fatigue life of the composites decreased with 1.5 and 2.0 wt.% of microcapsules in comparison with composites with 0.5 and 1.0 wt.% of microcapsules. The fracture surfaces of the tested samples were examined with the help of scanning electron microscopy (SEM) to understand the various mechanisms responsible for the change in modulus, strength, failure strain, and fatigue life of composites.

Propagation of fundamental Lamb modes along the non-principal axes of strain-stiffened soft compressible plates: A numerical investigation.

This paper numerically investigates the propagation of elastic plate waves along the non-principal directions in a prestretched compressible material described by the Gent model of hyperelasticity. We formulate the elastic tensor and the underlying wave equations in the Lagrangian space by employing the theory of nonlinear elasticity together with the linearized incremental equations. An extension of the Semi-Analytical Finite Element (SAFE) method is discussed for computing the dispersion characteristics of the two fundamental guided wave modes. The predictive capabilities of the numerical framework are established using the previously published data for a weakly nonlinear as well as hyperelastic material models. Using the numerical framework, we then bring out the effects of applied prestretch, orientation of the propagation direction, and material parameters on the dispersion characteristics of the fundamental Lamb modes. A limiting case of the neo-Hookean material model is first considered for elucidating such implicit dependencies, which are further highlighted by considering the strain-stiffening effect captured through the Gent material model. Our results indicate the existence of a threshold prestretch for which the Gent-type material can encounter a snap-through instability; leading to the change in the dispersion characteristics of the fundamental symmetric Lamb mode.

Development of duplex real-time PCR for quick detection of cryptosporidiosis in goats.

Cryptosporidium spp. is the most important foodborne and waterborne pathogens and a leading cause of mortality from foodborne and waterborne gastrointestinal diseases. In neonates of domestic animals, it is associated with consistent diarrhea and dehydration. Cryptosporidium infection begins with the ingestion of sporulated oocytes disseminated by carrier animals that consistently contaminate the environment. Many diagnostic tests are available including microscopy and antigen trap-ELISA, but none of the diagnostic tests available currently cannot differentiate between active and passive infection in the host. In the current study, to address this challenge an mRNA-based duplex TaqMan® probe PCR was developed to target the Cryptosporidium oocyst wall protein gene and 18SSU rRNA gene in a single tube that can detect metabolically active cryptosporidial oocysts. The mRNA transcripts are the direct indicator of any actively replicating cell and they will help decipher the active stages of its lifecycle in a host. This diagnostic assay was standardized by computing transcript copy number-based limit of detection (LOD). For COWP and 18SSU rRNA genes, the LOD was 7.08 × 1004 and 5.95 × 1005 , respectively. During active infections, the oocyst wall protein will be active and so its COWP gene transcripts will act as a marker for active infection. While transcripts for 18SSU rRNA are constitutively expressed in cryptosporidial life cycle. This current diagnostic assay will be a quantitative marker that will help assess the active stages of Cryptosporidium infection in neonates. The disease dynamics will help better understand to formulate the control strategies and contain infection among healthy animals.

Alleviation of Residual Vibrations in Hard-Magnetic Soft Actuators Using a Command-Shaping Scheme.

Hard-magnetic soft materials belong to a class of the highly deformable magneto-active elastomer family of smart materials and provide a promising technology for flexible electronics, soft robots, and functional metamaterials. When hard-magnetic soft actuators are driven by a multiple-step input signal (Heaviside magnetic field signal), the residual oscillations exhibited by the actuator about equilibrium positions may limit their performance and accuracy in practical applications. This work aims at developing a command-shaping scheme for alleviating residual vibrations in a magnetically driven planar hard-magnetic soft actuator. The control scheme is based on the balance of magnetic and elastic forces at a critical point in an oscillation cycle. The equation governing the dynamics of the actuator is devised using the Euler-Lagrange equation. The constitutive behaviour of the hard-magnetic soft material is modeled using the Gent model of hyperelasticity, which accounts for the strain-stiffening effects. The dynamic response of the actuator under a step input signal is obtained by numerically solving the devised dynamic governing equation using MATLAB ODE solver. To demonstrate the applicability of the developed command-shaping scheme, a thorough investigation showing the effect of various parameters such as material damping, the sequence of desired equilibrium positions, and polymer chain extensibility on the performance of the proposed scheme is performed. The designed control scheme is found to be effective in controlling the motion of the hard-magnetic soft actuator at any desired equilibrium position. The present study can find its potential application in the design and development of an open-loop controller for hard-magnetic soft actuators.

Survey of public library use in the Ambulatory Clinic in the Children's Hospital Winnipeg.

Introduction: Recent studies highlight synergies for families receiving early childhood literacy support from their health care provider and public library, with more reading at home and higher quality book-sharing interactions. Our primary objective was to determine the percentage of Children's Hospital Winnipeg Ambulatory Clinic's patients who had ever used a public library. The clinic has a longstanding early-childhood literacy program and serves remote communities and low-income Winnipeg families. Methods: A structured survey was administered to parents or legal guardians by the first author. It explored library barriers and covariates that might affect library use. Analysis included descriptive statistics and a logistic regression model for predictors of library use. Results: Ninety-seven nearly consecutive surveys were administered, half prior to the COVID-19 pandemic. Most respondents were female, from Winnipeg, and in the two lowest neighbourhood income quintiles. Roughly half (46.4%) of children had used a library. Most respondents wanted health care providers to promote literacy and provide information about public libraries, and more supported in-clinic distribution of books. The number of children per household positively predicted library use, possibly a proxy for experience with community resources. About 2/3 of respondents believed that library fines should be abolished. Most identified other barriers, for example, inconvenient hours, distance, or concerns about COVID-19. Conclusion: Less than half of surveyed families used public libraries, citing multiple barriers, including fines. Moreover, not all health care providers can offer new books and anticipatory guidance. Clinics that promote use of public libraries may therefore represent a low-cost, stand-alone alternative.

Study on Microstructural Characterization, Mechanical Properties and Residual Stress of GTAW Dissimilar Joints of P91 and P22 Steels.

This article deals with the dissimilar joining of two different grade Cr-Mo steel (2.25Cr-1Mo: P22 and modified 9Cr-1Mo: P91) for power plant application. The dissimilar butt-welded joint was produced for conventional V groove design by using the gas tungsten arc welding (GTAW) process with the application of an ERNiCrMo-3 Ni-based super alloy filler. A microstructure characterization was performed to measure the inhomogeneity in the microstructure and element diffusion across the interface in a welded joint. The experiments were also performed to evaluate the mechanical properties of the dissimilar welded joint in as-welded (AW) and post-weld heat treatment (PWHT) conditions. An acceptable level of the mechanical properties was obtained for the AW joint. After PWHT, a significant level of the element diffusion across the interface of the weld metal and P22 steel was observed, resulting in heterogeneity in microstructure near the interface, which was also supported by the hardness variation. Inhomogeneity in mechanical properties (impact strength and hardness) was measured across the weldments for the AW joint and was reduced after the PWHT. The tensile test results indicate an acceptable level of tensile properties for the welded joint in both AW and PWHT conditions and failure was noticed in the weak region of the P22 steel instead of the weld metal.

Solvent-free production of nano-FeS anchored graphene from Ulva fasciata: A scalable synthesis of super-adsorbent for lead, chromium and dyes.

Here we demonstrate, a simple and solvent-free synthetic route for the production of FeS/Fe(0) functionalized graphene nanocomposite (G-Fe) via a one-step pyrolysis of seaweed biomass (Ulva fasciata). It is proposed that the natural abundance of both inorganic and organic sulfur in the seaweed induces the reduction of exfoliated graphitic sheets at elevated temperatures. FeCl3 was employed both as the iron precursor as well as the templating agent. Iron doping played a dual-faceted role of exfoliating as well as activating agent, producing composite with high adsorption capacity for Pb2+ (645 ±â€¯10 mg/g), CR (970 mg/g), CV(909 mg/g), MO (664 mg/g), MB (402 mg/g) dyes and good recyclability (8 cycles). Pb2+ adsorption was irreversible even at low pH values and the spent composite (G-Fe-Pb) was utilized for efficient Cr(IV) removal (Ì´100 mg/g). The adsorption data followed the pseudo second order kinetics while the equilibrium data fitted perfectly into the Langmuir adsorption equation. Further, a thin layer of composite was deposited on a filter paper by vacuum filtration which was tested under continuous filtration mode for RB5 dye removal. Preliminary results highlight the potential of this composite to be used in pretreatment steps in hybrid membrane processes for filtration of complex wastewater feeds.

DC dynamic pull-in instability of a dielectric elastomer balloon: an energy-based approach.

This paper reports an energy-based method for the dynamic pull-in instability analysis of a spherical dielectric elastomer (DE) balloon subjected to a quasi-statically applied inflation pressure and a Heaviside step voltage across the balloon wall. The proposed technique relies on establishing the energy balance at the point of maximum stretch in an oscillation cycle, followed by the imposition of an instability condition for extracting the threshold parameters. The material models of the Ogden family are employed for describing the hyperelasticity of the balloon. The accuracy of the critical dynamic pull-in parameters is established by examining the saddle-node bifurcation in the transient response of the balloon obtained by integrating numerically the equation of motion, derived using the Euler-Lagrange equation. The parametric study brings out the effect of inflation pressure on the onset of the pull-in instability in the DE balloon. A quantitative comparison between the static and dynamic pull-in parameters at four different levels of the inflation pressure is presented. The results indicate that the dynamic pull-in instability gets triggered at electric fields that are lower than those corresponding to the static instability. The results of the present investigation can find potential use in the design and development of the balloon actuators subjected to transient loading. The method developed is versatile and can be used in the dynamic instability analysis of other conservative systems of interest.

Creation of molecular complexities via a new Cu-catalyzed cascade reaction: a direct access to novel 2,2'-spirobiindole derivatives.

A Cu-mediated unprecedented cascade reaction in the presence of air afforded a conceptually new synthesis of 2,2'-spirobiindole derivatives. This reaction proceeds via the rearrangement of several bonds in a cyclopenta[b]indole framework including a facial selective intramolecular ring closure. The potential of this method is highlighted in the straightforward and single step synthesis of a paullone like compound.

A direct access to bioactive fused N-heterocyclic acetic acid derivatives.

A Cu-catalyzed new sequence involving the Ullmann type intermolecular C-C followed by an intramolecular C-N coupling and then intramolecular aza-Michael type addition (and oxidation) in a single pot afforded various fused N-heterocyclic acetic acid derivatives as inhibitors of PDE4.

Manganese-oxide-coated alumina: a promising sorbent for defluoridation of water.

In this study, adsorption potential of a new sorbent manganese-oxide-coated alumina (MOCA) was investigated for defluoridation of drinking water using batch and continuous mode experiments. The effects of different parameters such as pH, initial fluoride concentration and co-existing ions (usually present in groundwater sample) were studied to understand the adsorption behavior of the sorbent under various conditions. Optimum removal of fluoride ions occurred in a pH range of 4-7. Results of the present study indicate that fluoride adsorption rate and adsorption capacity of MOCA are far superior to that of activated alumina (AA), which was used as the base material for MOCA preparation. The MOCA can be effectively regenerated using 2.5% NaOH as eluent. The Langmuir equilibrium model was found to be suitable for describing the fluoride sorption on AA and MOCA. The maximum fluoride uptake capacity for MOCA and AA was found to be 2.85 and 1.08 mg g(-1), respectively. The kinetic results showed that the fluoride sorption to MOCA followed pseudo--second-order kinetics with a correlation coefficient greater than 0.98. The fluoride sorption capacity at breakthrough point for both the adsorbents was greatly influenced by bed depth. A bed depth service time (BDST) approach was adopted to describe the continuous flow system. The batch and column studies demonstrated the superiority of MOCA over AA in removing fluoride from the drinking water system.