RESUMEN
The dependence on lithium for the energy needs of the world, coupled with its scarcity, has prompted the exploration of postlithium alternatives. Calcium-ion batteries are one such possible alternative owing to their high energy density, similar reduction potential, and naturally higher abundance. A critical gap in calcium-ion batteries is the lack of suitable cathodes for intercalating calcium at high voltages and capacities while also maintaining structural stability. Transition metal oxide postspinels have been identified as having crystal structures that can provide low migration barriers, high voltages, and facile transport pathways for calcium ions and thus can serve as cathodes for calcium-ion batteries. However, experimental validation of transition metal oxide postspinel compounds for calcium ion conduction remains unexplored. In this work, calcium manganese oxide (CaMn2O4) in the postspinel phase is explored as an intercalation cathode for calcium-ion batteries. CaMn2O4 is first synthesized via solid-state synthesis, and the phase is verified with X-ray diffraction (XRD). The redox activity of the cathode is investigated with cyclic voltammetry (CV) and galvanostatic (GS) cycling, identifying oxidation potentials at 0.2 and 0.5 V and a broad insertion potential at -1.5 V. CaMn2O4 can cycle at a capacity of 52 mAh/g at a rate of C/33, and calcium cycling is verified with energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) and modeled with density functional theory (DFT) simulations. The results from the investigation concluded that CaMn2O4 is a promising cathode for calcium-ion batteries.
RESUMEN
The use of calcium (Ca) metal anodes in batteries is currently challenged by the development of a suitable solid electrolyte interface (SEI) that enables effective Ca2+ ion transport. Native calcium electrolytes produce a passivation layer on the surface of the calcium electrodes during cycling, causing a decrease in capacity during cycling and the need for large overpotentials. The use of a hybrid SEI is a strategy to mitigate the uncontrolled production of a passivation layer and reduce the overpotentials needed for the plating and stripping of calcium. Here, we report the development of a hybrid potassium (K)/Ca SEI layer investigated in symmetric Ca//Ca cell configurations. Using KPF6 salt in a ternary mixture of carbonate solvent (EC/EMC/DMC), Ca//Ca cells can be cycled up to 200 h at a capacity of 0.15 mAh/cm2 with a current density of 0.025 mA/cm2. The symmetrical cells consistently cycle at overpotentials of 1.8 V. Ex-situ X-ray diffraction (XRD) of cycled electrodes reveals plating and stripping of both calcium and potassium. Energy dispersive X-ray (EDX) maps confirm the plating of calcium and potassium during galvanostatic cycling. Scanning electron microscopy (SEM) cross-sectional views of the calcium electrodes reveal a continuous SEI layer formed over the calcium metal. XRD analysis reveals the SEI layer consists of K-based inorganics along with the identification of permanent and transient phases. FTIR outlines the parallel plating of both calcium and potassium at both regions of redox activity. Raman spectroscopy of the electrolyte reveals compositional changes over the course of cycling that promote increased plating and stripping. The results indicate that potassium electrolytes are a possible route for tuning the SEI to enable reversible calcium electrochemical cycling.
