Unraveling the impact of starch granule-associated proteins on the emulsifying ability of quinoa starch granules at multiple scales.

Total starch granule-associated proteins (tGAP), including granule-channel (GCP) and granule-surface proteins (GSP), alter the physicochemical properties of starches. Quinoa starch (QS) acts as an effective emulsifier in Pickering emulsion. However, the correlation between the tGAP and the emulsifying capacity of QS at different scales remains unclear. Herein, GCP and tGAP were selectively removed from QS, namely QS-C and QS-A. Results indicated that the loss of tGAP increased the water permeability and hydrophilicity of the starch particles. Mesoscopically, removing tGAP decreased the diffusion rate and interfacial viscous modulus. Particularly, GSP had a more profound impact on the interfacial modulus than GCP. Microscopically and macroscopically, the loss of tGAP endowed QS with weakened emulsifying ability in terms of emulsions with larger droplet size and diminished rheological properties. Collectively, this work demonstrated that tGAP played an important role in the structural and interfacial properties of QS molecules and the stability of QS-stabilized emulsions.

Structural characterization and physicochemical properties of grain amaranth starch.

With potato starch (PS) and corn starch (CS) as the controls, the structure and physicochemical properties of grain amaranth starch (GAS) and its binding with dihydromyricetin were investigated in this study. The results indicated that GAS granules were small in size (3.21 ± 0.13 µm) and had a low amylose content (11.57 ± 0.91%). GAS exhibited low paste clarity, solubility, and swelling power, but demonstrated good freeze-thaw stability and resistance to retrogradation. Although the pasting temperature of GAS was high (75.88 ± 0.03 °C), its peak viscosity, breakdown viscosity, and setback viscosity were significantly lower than those of PS and CS. GAS was classified as A-type starch, with a high molecular weight and broad distribution (Mw, 3.96 × 107 g/mol; PDI, 2.67). For its chain length distribution, chain B1 had the highest proportion (50.09%), while chain B3 had the lowest proportion (13.50%). The complexation of GAS with dihydromyricetin effectively enhanced its ABTS and DPPH free radical scavenging capacities.

Effect of Chlorella pyrenoidosa and Spirulina platensis powder on the physicochemical, structural, and rheological properties of rice starch: A comparative study.

The effect of Chlorella pyrenoidosa (CP) and Spirulina platensis (SP) at concentrations of 0 %-12 % on the properties of rice starch (RS) was investigated. Compared with pure RS, the addition of CP and SP powder decreased the viscosity, increased the gelatinization temperature, and promoted the retrogradation of RS gel. However, when CP was added at 12 % and SP at 8 %, retrogradation inhibition was reduced. At these concentrations, the relative crystallinity of the CP mixture increased by 57.37 %, whereas that of SP increased by 48.13 %. Scanning electron microscopy revealed that the addition of low amount of CP and SP reduced porosity. CP and SP powder facilitated the conversion of bound water to free water and contributed to the weakening of the viscoelasticity of the RS gel. CP powder likely had a more detrimental effect on the short-term storage properties of RS than SP powder. These results provide theoretical support for the development of RS-based products and the innovative utilization of microalgae.

Isolated cassava cells: Comparison of structure and physicochemical properties with starch and whole flour.

Individual cells are the smallest units of the plant tissue structure, and their structure and physicochemical properties are essential for whole food processing. In this study, cassava cells were isolated using acid-alkali, hydrothermal, and pectinase methods, and the differences in microstructure and physicochemical properties among the cells, starch, and whole flour were investigated. Cassava cells isolated using pectinase showed intact individual cells with a higher isolation rate and less damage to the cell wall structure and intracellular composition. The presence of cell walls in intact individual cells inhibited the swelling and leaching of starch, resulting in a lower peak viscosity and higher gelatinization temperature than those of starch. The intact cell structure and non-starch composition enhanced the shear resistance of the gels in the sample. Heat treatment led to the gelatinization of intracellular starch and increased the permeability of the cell wall, destroying the physical barrier function of the cell wall; however, the compact cell matrix and non-starch components can inhibit starch hydrolysis. This study suggests that cells isolated using pectinase can be used to investigate the effect of cell walls on the functional properties of intracellular starch in cassava. The isolated cells provide new insights into the cassava industry.

Caffeine weakens the astringency of epigallocatechin gallate by inhibiting its interaction with salivary proteins.

The astringency of green tea is an integrated result of the synergic and antagonistic effects of individual tea components, whose mechanism is highly complex and not completely understood. Herein, we used an epigallocatechin gallate (EGCG)/caffeine (CAF)/saliva model to simulate the oral conditions during tea drinking. The effect of CAF on the interaction between EGCG and salivary proteins was first investigated using molecular docking and isothermal titration calorimetry (ITC). Then, the rheological properties and the micro-network structure of saliva were studied to relate the molecular interactions and perceived astringency. The results revealed that CAF partially occupied the binding sites of EGCG to salivary proteins, inhibiting their interaction and causing changes in the elastic network structure of the salivary film, thereby reducing astringency.

Advances in valorization of sweet potato peels: A comprehensive review on the nutritional compositions, phytochemical profiles, nutraceutical properties, and potential industrial applications.

During food production, food processing, and supply chain, large amounts of food byproducts are generated and thrown away as waste, which to a great extent brings about adverse consequences on the environment and economic development. The sweet potato (Ipomoea batatas L.) is cultivated and consumed in many countries. Sweet potato peels (SPPs) are the main byproducts generated by the tuber processing. These residues contain abundant nutrition elements, bioactive compounds, and other high value-added substances; therefore, the reutilization of SPP holds significance in improving their overall added value. SPPs contain abundant phenolic compounds and carotenoids, which might contribute significantly to their nutraceutical properties, including antioxidant, antimicrobial, anticancer, prebiotic, anti-inflammatory, wound-healing, and lipid-lowering effects. It has been demonstrated that SPP could be promisingly revalorized into food industry, including: (1) applications in diverse food products; (2) applications in food packaging; and (3) applications in the recovery of pectin and cellulose nanocrystals. Furthermore, SPP could be used as promising feedstocks for the bioconversion of diverse value-added bioproducts through biological processing.

Effects of airflow superfine pulverization on the structure, functional properties, and flavor quality of wheat bran.

BACKGROUND: Wheat bran (WB) is a byproduct of refined wheat flour production with poor edible taste and low economic value. Herein, the WB was micronized via airflow superfine pulverization (ASP), and the effects of the ASP conditions on its particle size, nutritive compositions, whiteness, hydration characteristics, moisture distribution, microstructure, cation exchange capacity, volatile flavor components, and other characteristics were investigated. RESULTS: Reducing the rotational speed of the ASP screw and increasing the number of pulverizations significantly decreased the median particle size Dx(50) of WB to a minimum of 12.97 ± 0.19 µm (P < 0.05), increased the soluble dietary fiber content from 55.05 ± 2.94 to 106.86 ± 1.60 mg g-1, and improved the whiteness and water solubility index. In addition, the water holding capacity and oil holding capacity were significantly reduced (P < 0.05), while the cation exchange and swelling capacities first increased and then decreased. Up to about 70% of water in WB exists as bound water. As the Dx(50) of WB decreased, the content of bound and immobile water increased, while the free water decreased from 14.37 ± 1.21% to 7.59 ± 1.03%. Furthermore, WB was micronized and the particles became smaller and more evenly distributed. Using gas chromatography-ion mobility spectrometry, a total of 37 volatile compounds in micronized WB (including 10 aldehydes, 9 esters, 7 alcohols, and several acids, furans, ethers, aldehydes, esters, and alcohols) were identified as the main volatile compounds of WB. CONCLUSION: Collectively, ASP improved the physicochemical properties of WB. This study provides theoretical references for the use of ASP to improve the utilization and edibility of WB. © 2024 Society of Chemical Industry.

Physicochemical characterization of a composite flour: Blending purple sweet potato and rice flours.

In this study, the physicochemical characterization of different ratios of purple sweet potato flour (PSPF) and rice flour was investigated to improve the nutritional value and enrich the variety of rice-based staple food. The results showed that adding PSPF increased total dietary fiber and anthocyanin content whereas decreased amylose content of the composite flours. Additionally, the composite flours exhibited lower thermodynamic parameters and displayed darker, redder, and bluer colors. There were no noticeable changes in the functional group structure of the composite flours. The addition of PSPF decreased the crystallinity and water-holding capacity of the composite flours, whereas increased the average particle size and iodine blue value. PSPF increased the pasting temperature of the flours whereas decreased the breakdown and setback values. Overall, the addition of PSPF significantly affects the nutrition, color and physicochemical properties of the composite flours.

Correlation between acoustic characteristics and sensory evaluation of puffed-grain food based on energy analysis.

Puffed-grain food is a crispy snack whose consumer satisfaction depends on snack crispness and crunchiness, which can be characterized by the sound and the acoustic signals of food breaking. This study aimed to evaluate whether acoustic characteristics can be used to predict the crispness of various puffed-grain food. Sensory evaluation was performed on puffed-grain products with varying hygroscopic durations and different types. The relation between sensory evaluation and acoustic characteristics of nine different types of food was examined. The Hilbert-Huang transform was used to perform energy segmentation of the acoustic signal of puffed-grain food and observe its energy migration process. The results showed that energy release was more concentrated in the low-frequency range for grain-puffed foods with different hygroscopic durations. No notable correlation was observed between the low-frequency interval and sensory crispness for the different types of puffed-grain foods. However, the acoustic features extracted from their inherent low-frequency intervals showed a significantly improved correlation with sensory crispness. Therefore, it provides a theoretical reference for applying acoustic characteristics to describe food texture.

Effect of zein-pectin composite particles on the stability and rheological properties of gelatin/hydroxypropyl methylcellulose water-water systems.

To improve the compatibility of gelatin (GA) and hydroxypropyl methylcellulose (HPMC), we investigated the effects of zein-pectin composite particles (ZCPs) with various zein/pectin ratios (1:0, 1:0.5, 1:1, 1:1.5, and 1:2) on the physical stability, microstructure, and rheological properties of the GA/HPMC water-water systems. With increasing pectin ratio, the particle size of the composite particles increased from 234.53 ± 1.48 nm to 1111.00 ± 26.91 nm, and their zeta potential decreased from 20.60 mV to below -34.77 mV. Macroscopic and microstructure observations indicated that pectin-modified ZCPs could effectively inhibit phase separation behavior between GA and HPMC. Compared to pure HPMC, the GA/HPMC water-water systems possessed a higher viscosity and dynamic modulus at room temperatures but lower gel temperatures (reduction of about 11 %). The viscosity and modulus of the water-water systems increased with increasing pectin ratio in ZCPs. However, the ratio had no impact on the gel-sol (sol-gel) transition temperatures (not statistically significant (P < 0.05)). This study may serve as a reference for advancing the processability of HPMC.

Assessing Starch Retrogradation from the Perspective of Particle Order.

Starch retrogradation is a complex process involving changes in the multi-scale structure. In particular, the particle order of retrograded starch is unclear. In this study, we measured the radius of gyration (Rg) and radius of particles (R) of retrograded starch using small-angle X-ray scattering. Retrograded starch included various Rg, and the values of Rg depended on the length and state of the starch chains. With time, the standard deviations of R decreased due to the increase in particle uniformity. Based on these results, a new method for assessing the degree of starch retrogradation was established from the perspective of the particle order. The accuracy of the new method was verified through differential scanning calorimetry and scanning electron microscopy. The microstructures of the samples indicated that the retrograded starch granules contained substructures (primary particles) of different sizes. This study provides a new perspective for analyzing the structure of retrograded starch.

Dynamic Formation of Green Tea Cream and the Identification of Key Components Using the "Knock-Out/Knock-In" Method.

The composition of green tea cream is extremely complex, and identification of key components is a prerequisite for elucidating its microstructure formation mechanism. This study examined the dynamic changes in the content of components and properties of colloid particles during the formation process of tea cream by chemical analysis and dynamic laser scattering (DLS). A "knock-out/knock-in" method was developed and used to further explore the relationship between the interaction of these components and the microstructure formation of tea cream. The results revealed that polysaccharides, proteins, epigallocatechin gallate (EGCG), and caffeine were the main components involved in tea cream formation. These components participated in the formation process in the form of polysaccharide-protein and EGCG-caffeine colloidal particles. Consequently, there were synchronized dynamic changes in the levels of polysaccharides, proteins, EGCG, and caffeine. The "knock-out/knock-in" experiment revealed that the interactions between EGCG or caffeine and macro-molecule components were not the key factors in tea cream microstructure formation. However, it was found that the complexation between EGCG and caffeine played a crucial role in the formation of tea cream. The findings suggested that decreasing the concentrations of EGCG and caffeine could be useful in controlling tea cream formation during tea beverage processing and storage.

Aggregation kinetics of green tea nanoparticles: Effects of pH, metal ions, and temperature.

Colloidal nanoparticles in tea infusion are the link connecting micromolecular mechanism and macro-aggregation process of tea cream formation. In order to elucidate, the kinetics mechanism of green tea nanoparticles (gTNPs) aggregation, zeta-potentials, total average aggregation (TAA) rates, and critical coagulation concentration (CCC) in the presence of various pH and metal ions were investigated. Additionally, the effect of temperature on gTNPs aggregation was further explored. The results revealed that the TAA rate of gTNPs increased with decreasing pH values, the CCC of gTNPs increased in the order Mg2+  ≈ Ca2+  < Na+  ≈ K+ . The reason was that different positive ions changed the surface electric field strength of gTNPs to a different extent. Furthermore, it was indicated that low temperature could promote gTNPs aggregation in indirect way. Low temperature promoted the binding of epigallocatechin gallate (EGCG) and caffeine, and the combination between gTNPs and EGCG-caffeine complexes weakened the stability of gTNPs resulting from reduction in electrostatic repulsion. PRACTICAL APPLICATION: Tea is a popular beverage all over the world. This research revealed the mechanism of green tea nanoparticles aggregation and laid a theoretical foundation for the regulation of tea cream formation in tea beverage.

Effects of epigallocatechin gallate, caffeine, and their combination on fat accumulation in high-glucose diet-fed Caenorhabditis elegans.

Epigallocatechin gallate (EGCG) and caffeine are inevitable to be ingested together in the process of drinking green tea. This study used Caenorhabditis elegans as an organism model to examine whether the binding of EGCG and caffeine could influence the fat-reduction effect. The results revealed that EGCG significantly reduced the Nile Red fluorescence intensity and the triglyceride/protein ratio of the C. elegans obesity model by 14.7% and 16.5%, respectively, while the effect of caffeine was not significant. Moreover, the degree of reduction in fluorescence intensity and triglyceride/protein ratio by EGCG + caffeine was comparable to that of EGCG. In the exploration of underlying mechanism, we found that EGCG and EGCG + caffeine treatments had no influence on food intake and energy expenditure of C. elegans. Their fat-reduction effects were dependent on the regulation of lipogenesis, as shown by the decreased expression of the sbp-1, fat-7, and daf-16 genes.

Modulating interfacial structure and lipid digestion of natural Camellia oil body by roasting and boiling processes.

Oil body (OB) is the lipid-storage organelle in oilseed, and its stability is crucial for oilseed processing. Herein, effects of roasting and boiling on the structure, stability, and in vitro lipid digestion of Camellia OB were studied. The interfacial structure and physical stability of the extracted OB were investigated by electrophoresis, confocal-Raman spectroscopy, zeta-potential, and surface hydrophobicity, etc. Boiling caused protein loss on the OB surfaces, forming a stable phospholipid interface, which resulted in coalescence of the droplets (d > 100 µm) and negative ζ-potential (-3 âˆ¼ -8 mV) values at a pH of 2.0. However, roasting partially denatured the proteins in the seeds, which were adsorbed on the OB surfaces. The random coil structure of interfacial protein increased to ∼20 % after thermal treatment. Besides, heating decreased the surface hydrophobicity of OB and improved lipid digestion. After boiling 60 min, the extent of lipolysis increased from 41.7 % (raw) to 57.4 %.

Formation, digestion properties, and physicochemical stability of the rice bran oil body carrier system.

Rice bran is a major by-product of rice processing with abundant nutrient content. Oil bodies (OBs), which are fat particles with unique physicochemical stability, are specialized organelles for the storage of oils and fats in plant tissues. In this study, we extracted OBs from rice bran, to evaluate the function of hydrophobic nutrients efficiently delivered by OBs. The carrier system was prepared by sonicating curcumin with medium chain triglycerides (MCT) into rice bran oil bodies (RBOBs). Emulsions comprising different RBOB mass fractions were characterized. The results showed that the highest encapsulation efficiency (EE, 87.67%), optimal particle size (190 nm), and best storage stability were achieved with the 1.5 wt% RBOBs. Based on activity evaluation data, the carrier system can achieve sustained oil release in the intestine and shows high bioaccessibility (61.04%; IC50 in Caco-2 cells was 77.21 µg/mL), which is important for promoting grain by-product utilization.

Improve stability and application of rice oil bodies via surface modification with ferulic acid, (-)-epicatechin, and phytic acid.

Rice bran oil bodies (RBOBs) are one of the most exploited functional components from rice bran by-products and are predominantly based on oleosin stabilization. In this study, we explored the effects of different concentrations of added (-)-epicatechin, ferulic acid, and phytic acid on the RBOBs stability. The results revealed that the incorporation of all three natural phytoconstituents could reduce the RBOBs particle size and increase emulsifying properties, demonstrating increasing surface hydrophobicity (p < 0.05), and a good antioxidant effect, which was especially obvious with (-)-epicatechin incorporation. Fourier transform infrared (FT-IR) spectroscopy data demonstrated that these three small molecule substance classes can modify with oleosin on RBOBs surface by covalent and noncovalent effects. Raman spectroscopic analysis illustrated that the vibrational modes of disulphide bonds in oleosin were modified by these three plant natural ingredients. The interactions between the three phytoconstituents and the model protein were investigated by molecular docking experiments.

Structural Transitions of Alpha-Amylase Treated with Pulsed Electric Fields: Effect of Coexisting Carrageenan.

Pulsed electric field (PEF) is an effective way to modulate the structure and activity of enzymes; however, the dynamic changes in enzyme structure during this process, especially the intermediate state, remain unclear. In this study, the molten globule (MG) state of α-amylase under PEF processing was investigated using intrinsic fluorescence, surface hydrophobicity, circular dichroism, etc. Meanwhile, the influence of coexisting carrageenan on the structural transition of α-amylase during PEF processing was evaluated. When the electric field strength was 20 kV/cm, α-amylase showed the unique characteristics of an MG state, which retained the secondary structure, changed the tertiary structure, and increased surface hydrophobicity (from 240 to 640). The addition of carrageenan effectively protected the enzyme activity of α-amylase during PEF treatment. When the mixed ratio of α-amylase to carrageenan was 10:1, they formed electrostatic complexes with a size of ~20 nm, and carrageenan inhibited the increase in surface hydrophobicity (<600) and aggregation (<40 nm) of α-amylase after five cycles of PEF treatment. This work clarifies the influence of co-existing polysaccharides on the intermediate state of proteins during PEF treatment and provides a strategy to modulate protein structure by adding polysaccharides during food processing.

Morphology and Rheology of a Cool-Gel (Protein) Blended with a Thermo-Gel (Hydroxypropyl Methylcellulose).

This study investigates the morphological and rheological properties of blended gelatin (GA; a cooling-induced gel (cool-gel)) and hydroxypropyl methylcellulose (HPMC; a heating-induced gel (thermo-gel)) systems using a fluorescence microscope, small angle X-ray scattering (SAXS), and a rheometer. The results clearly indicate that the two biopolymers are immiscible and have low compatibility. Moreover, the rheological behavior and morphology of the GA/HPMC blends significantly depend on the blending ratio and concentration. Higher polysaccharide contents decrease the gelling temperature and improve the gel viscoelasticity character of GA/HPMC blended gels. The SAXS results reveal that the correlation length (ξ) of the blended gels decreases from 5.16 to 1.89 nm as the HPMC concentration increases from 1 to 6%, which suggests that much denser networks are formed in blended gels with higher HPMC concentrations. Overall, the data reported herein indicate that the gel properties of gelatin can be enhanced by blending with a heating-induced gel.