Multi-scale vascularization strategy for 3D-bioprinted tissue using coaxial core-shell pre-set extrusion bioprinting and biochemical factors.

Three-dimensional bioprinting is a key technology in bioartificial organ production. However, production of bioartificial organs has significant limitations because it is hard to build vascular structures, especially capillaries, in printed tissue owing to its low resolution. As the vascular structure plays a critical role in delivering oxygen and nutrients to cells and removing metabolic waste, building vascular channels in bioprinted tissue is essential for bioartificial organ production. In this study, we demonstrated an advanced strategy for fabricating multi-scale vascularized tissue using a pre-set extrusion bioprinting technique and endothelial sprouting. Using a coaxial precursor cartridge, mid-scale vasculature-embedded tissue was successfully fabricated. Furthermore, upon generating a biochemical gradient environment in the bioprinted tissue, capillaries were formed in this tissue. In conclusion, this strategy for multi-scale vascularization in bioprinted tissue is a promising technology for bioartificial organ production.

Fabrication of 3D-Printed Implant for Two-Stage Ear Reconstruction Surgery and Its Clinical Application.

PURPOSE: Ear reconstruction is one of the most difficult areas in the field of reconstructive surgery. Due to limitations of the current practice, a novel method of auricular reconstruction is needed. Major advancements in three-dimensional (3D) printing technique have rendered the process of ear reconstruction more favorable. Herein, we present our experience in designing and clinically using 3D implants in both 1st and 2nd stage ear reconstruction surgery. MATERIALS AND METHODS: After obtaining 3D CT data from each patient, a 3D geometric ear model was created using mirroring and segmentation processes. The 3D-printed implant design resembles but does not exactly match the normal ear shape, and can be inserted in harmony with the currently used surgical technique. The 2nd stage implant was designed to minimize dead space and support the posterior ear helix. The 3D implants were finally fabricated with a 3D printing system and used in ear reconstruction surgery in our institute. RESULTS: The 3D implants were manufactured for application to the currently used two-stage technique while maintaining the shape of the patient's normal ear. The implants were successfully used for ear reconstruction surgery in microtia patients. A few months later, the 2nd stage implant was used in the 2nd stage operation. CONCLUSION: The authors were able to design, fabricate, and apply patient-specific 3D-printed ear implants for 1st and 2nd stage ear reconstruction surgeries. This design, combined with 3D bioprinting technique, may be a future alternative for ear reconstruction.

Zygomatic arch reconstruction with a patient-specific polycaprolactone/beta-tricalcium phosphate scaffold after parosteal osteosarcoma resection in a dog.

OBJECTIVE: To describe the surgical application of a 3D-printing-based, patient-specific, biocompatible polycaprolactone/beta-tricalcium phosphate (PCL/ß-TCP) scaffold to reconstruct the zygomatic arch after tumor resection in a dog. ANIMAL: A 13 year old female spayed Maltese. STUDY DESIGN: Case report METHODS: The dog's presenting complaint was swelling ventral to her right eye. A round mass arising from the caudal aspect of the right zygomatic arch was identified by computed tomography (CT). The histopathologic diagnosis was a low-grade spindle-cell tumor. Surgical resection was planned to achieve 5 mm margins. A patient-specific osteotomy guide and polycaprolactone/beta-tricalcium phosphate (PCL/ß-TCP) scaffold were produced. Osteotomy, including 30% of total zygomatic arch length, was performed using an oscillating saw aligned with the guide. The scaffold was placed in the defect. Parosteal osteosarcoma was diagnosed based on histopathological examination. Excision was complete, with the closest margin measuring 0.3 mm. RESULTS: Mild epiphora, due to surgical site swelling, subsided after 20 days. Tissue formation within and around the porous scaffold was noted on CT 10 months postoperatively, with no evidence of metastasis or local recurrence. Facial conformation appeared symmetrical, and no complications were noted 16 months postoperatively. CONCLUSION: The use of a 3D-printing-based, patient-specific, biocompatible PCL/ß-TCP scaffold successfully restored the structure and function of the zygomatic arch without complications, even following wide zygomectomy for complete tumor removal.

Impact of microstructure on cell behavior and tissue mechanics in collagen and dermal decellularized extra-cellular matrices.

Skin models are used for many applications such as research and development or grafting. Unfortunately, most lack a proper microenvironment producing poor mechanical properties and inaccurate extra-cellular matrix composition and organization. In this report we focused on mechanical properties, extra-cellular matrix organization and cell interactions in human skin samples reconstructed with pure collagen or dermal decellularized extra-cellular matrices (S-dECM) and compared them to native human skin. We found that Full-thickness S-dECM samples presented stiffness two times higher than collagen gel and similar to ex vivo human skin, and proved for the first time that keratinocytes also impact dermal mechanical properties. This was correlated with larger fibers in S-dECM matrices compared to collagen samples and with a differential expression of F-actin, vinculin and tenascin C between S-dECM and collagen samples. This is clear proof of the microenvironment's impact on cell behaviors and mechanical properties. STATEMENT OF SIGNIFICANCE: In vitro skin models have been used for a long time for clinical applications or in vitro knowledge and evaluation studies. However, most lack a proper microenvironment producing a poor combination of mechanical properties and appropriate biological outcomes, partly due to inaccurate extra-cellular matrix (ECM) composition and organization. This can lead to limited predictivity and weakness of skin substitutes after grafting. This study shows, for the first time, the importance of a complex and rich microenvironment on cell behaviors, matrix macro- and micro-organization and mechanical properties. The increased composition and organization complexity of dermal skin decellularized extra-cellular matrix populated with differentiated cells produces in vitro skin models closer to native human skin physiology.

Clinical Application of 3D-Printed Patient-Specific Polycaprolactone/Beta Tricalcium Phosphate Scaffold for Complex Zygomatico-Maxillary Defects.

(1) Background: In the present study, we evaluated the efficacy of a 3D-printed, patient-specific polycaprolactone/beta tricalcium phosphate (PCL/ß-TCP) scaffold in the treatment of complex zygomatico-maxillary defects. (2) Methods: We evaluated eight patients who underwent immediate or delayed maxillary reconstruction with patient-specific PCL implants between December 2019 and June 2021. The efficacy of these techniques was assessed using the volume and density analysis of computed tomography data obtained before surgery and six months after surgery. (3) Results: Patients underwent maxillary reconstruction with the 3D-printed PCL/ß-TCP scaffold based on various reconstructive techniques, including bone graft, fasciocutaneous free flaps, and fat graft. In the volume analysis, satisfactory volume conformity was achieved between the preoperative simulation and actual implant volume with a mean volume conformity of 79.71%, ranging from 70.89% to 86.31%. The ratio of de novo bone formation to total implant volume (bone volume fraction) was satisfactory with a mean bone fraction volume of 23.34%, ranging from 7.81% to 66.21%. Mean tissue density in the region of interest was 188.84 HU, ranging from 151.48 HU to 291.74 HU. (4) Conclusions: The combined use of the PCL/ß-TCP scaffold with virtual surgical simulation and 3D printing techniques may replace traditional non-absorbable implants in the future owing to its accuracy and biocompatible properties.

Long-term efficacy and safety of 3D printed implant in patients with nasal septal deformities.

PURPOSE: To investigate the long-term safety and efficacy of a 3D-printed bioresorbable polycaprolactone (PCL) nasal implant for nasal septal deformity reconstruction. METHODS: Fourteen patients who had undergone nasal septum reconstruction surgery using 3D-printed PCL nasal septal implants were enrolled. The primary outcome was the change in total Nasal Obstruction Symptom Evaluation (NOSE) scale scores between postoperative 3 months and current status (3.59 ± 0.51 years). The secondary outcomes were changes in the minimum cross-sectional area (MCA) and volume of both nasal cavities based on acoustic rhinometry, the cross-sectional area of the ostiomeatal unit, and the nasal septum angle of the paranasal sinus (PNS) in computed tomography (CT) images, and a visual analog scale (VAS) of the patients' subjective satisfaction. RESULTS: The results showed no significant changes in the MCAs (Cohen's d:0.09; p = 0.711) or nasal volume (Cohen's d:0.26; p = 0.356), the area of the ostiomeatal unit (Cohen's d:0.49; p = 0.064), septum angles (Cohen's d:0.18; p = 0.831), the NOSE scale (Cohen's d:0.14; p = 0.621), or patients' subjective satisfaction (Cohen's d:0.52; p = 0.076) during the follow-up period. CONCLUSIONS: This homogeneous composite microporous PCL nasal septal implant demonstrated long-term clinical efficacy and safety in human tissues that required maintenance of mechanical strength. Therefore, the indications for this implant could extend to various other craniofacial reconstructions in the future.

Bone Fracture-Treatment Method: Fixing 3D-Printed Polycaprolactone Scaffolds with Hydrogel Type Bone-Derived Extracellular Matrix and ß-Tricalcium Phosphate as an Osteogenic Promoter.

Bone formation and growth are crucial for treating bone fractures. Improving bone-reconstruction methods using autologous bone and synthetic implants can reduce the recovery time. Here, we investigated three treatments using two different materials, a bone-derived decellularized extracellular matrix (bdECM) and ß-tricalcium phosphate (ß-TCP), individually and in combination, as osteogenic promoter between bone and 3D-printed polycaprolactone scaffold (6-mm diameter) in rat calvarial defects (8-mm critical diameter). The materials were tested with a human pre-osteoblast cell line (MG63) to determine the effects of the osteogenic promoter on bone formation in vitro. A polycaprolactone (PCL) scaffold with a porous structure was placed at the center of the in vivo rat calvarial defects. The gap between the defective bone and PCL scaffold was filled with each material. Animals were sacrificed four weeks post-implantation, and skull samples were preserved for analysis. The preserved samples were scanned by micro-computed tomography and analyzed histologically to examine the clinical benefits of the materials. The bdECM-ß-TCP mixture showed faster bone formation and a lower inflammatory response in the rats. Therefore, our results imply that a bdECM-ß-TCP mixture is an ideal osteogenic promoter for treating fractures.

Production of Multiple Cell-Laden Microtissue Spheroids with a Biomimetic Hepatic-Lobule-Like Structure.

The construction of an in vitro 3D cellular model to mimic the human liver is highly desired for drug discovery and clinical applications, such as patient-specific treatment and cell-based therapy in regenerative medicine. However, current bioprinting strategies are limited in their ability to generate multiple cell-laden microtissues with biomimetic structures. This study presents a method for producing hepatic-lobule-like microtissue spheroids using a bioprinting system incorporating a precursor cartridge and microfluidic emulsification system. The multiple cell-laden microtissue spheroids can be successfully generated at a speed of approximately 45 spheroids min-1 and with a uniform diameter. Hepatic and endothelial cells are patterned in a microtissue spheroid with the biomimetic structure of a liver lobule. The spheroids allow long-term culture with high cell viability, and the structural integrity is maintained longer than that of non-structured spheroids. Furthermore, structured spheroids show high MRP2, albumin, and CD31 expression levels. In addition, the in vivo study reveals that structured microtissue spheroids are stably engrafted. These results demonstrate that the method provides a valuable 3D structured microtissue spheroid model with lobule-like constructs and liver functions.

Osteogenesis of 3D-Printed PCL/TCP/bdECM Scaffold Using Adipose-Derived Stem Cells Aggregates; An Experimental Study in the Canine Mandible.

Three-dimensional (3D) printing is perceived as an innovative tool for change in tissue engineering and regenerative medicine based on research outcomes on the development of artificial organs and tissues. With advances in such technology, research is underway into 3D-printed artificial scaffolds for tissue recovery and regeneration. In this study, we fabricated artificial scaffolds by coating bone demineralized and decellularized extracellular matrix (bdECM) onto existing 3D-printed polycaprolactone/tricalcium phosphate (PCL/TCP) to enhance osteoconductivity and osteoinductivity. After injecting adipose-derived stem cells (ADSCs) in an aggregate form found to be effective in previous studies, we examined the effects of the scaffold on ossification during mandibular reconstruction in beagle dogs. Ten beagles were divided into two groups: group A (PCL/TCP/bdECM + ADSC injection; n = 5) and group B (PCL/TCP/bdECM; n = 5). The results were analyzed four and eight weeks after intervention. Computed tomography (CT) findings showed that group A had more diffuse osteoblast tissue than group B. Evidence of infection or immune rejection was not detected following histological examination. Goldner trichrome (G/T) staining revealed rich ossification in scaffold pores. ColI, Osteocalcin, and Runx2 gene expressions were determined using real-time polymerase chain reaction. Group A showed greater expression of these genes. Through Western blotting, group A showed a greater expression of genes that encode ColI, Osteocalcin, and Runx2 proteins. In conclusion, intervention group A, in which the beagles received the additional ADSC injection together with the 3D-printed PCL/TCP coated with bdECM, showed improved mandibular ossification in and around the pores of the scaffold.

Bioprinting on 3D Printed Titanium Scaffolds for Periodontal Ligament Regeneration.

The three-dimensional (3D) cell-printing technique has been identified as a new biofabrication platform because of its ability to locate living cells in pre-defined spatial locations with scaffolds and various growth factors. Osseointegrated dental implants have been regarded as very reliable and have long-term reliability. However, host defense mechanisms against infections and micro-movements have been known to be impaired around a dental implant because of the lack of a periodontal ligament. In this study, we fabricated a hybrid artificial organ with a periodontal ligament on the surface of titanium using 3D printing technology. CEMP-1, a known cementogenic factor, was enhanced in vitro. In animal experiments, when the hybrid artificial organ was transplanted to the calvarial defect model, it was observed that the amount of connective tissue increased. 3D-printed hybrid artificial organs can be used with dental implants, establishing physiological tooth functions, including the ability to react to mechanical stimuli and the ability to resist infections.

Evaluation of Auricular Cartilage Reconstruction Using a 3-Dimensional Printed Biodegradable Scaffold and Autogenous Minced Auricular Cartilage.

Auricular cartilage reconstruction represents one of the greatest challenges for otolaryngology-head and neck surgery. The native structure and composition of the auricular cartilage can be achieved by combining a suitable chondrogenic cell source with an appropriate scaffold. In reconstructive surgery for cartilage tissue, autogenous cartilage is considered to be the best chondrogenic cell source. Polycaprolactone is mainly used as a tissue-engineered scaffold owing to its mechanical properties, miscibility with a large range of other polymers, and biodegradability. In this study, scaffolds with or without autogenous minced auricular cartilage were implanted bilaterally in rabbits for auricular regeneration. Six weeks (n = 4) and 16 weeks (n = 4) after implantation, real-time quantitative reverse transcription polymerase chain reaction and histology were used to assess the regeneration of the auricular cartilage. Quantitative reverse transcription polymerase chain reaction analysis revealed that the messenger RNA expression of aggrecan, collagen I, and collagen II was higher in scaffolds with 50% minced cartilage than the scaffold-only groups or scaffolds with 30% minced cartilage (P < 0.05). Furthermore, histological analysis demonstrated significantly superior cartilage regeneration in scaffolds with the minced cartilage group compared with the scaffold-only and control groups (P < 0.05). Autogenous cartilage can be easily obtained and loaded onto a scaffold to promote the presence of chondrogenic cells, allowing for an improvement of the reconstruction of auricular cartilage. Here, the regeneration of auricular cartilage was also successful in the 50% minced cartilage group. The results presented in this study could have clinical implications, as they demonstrate the potential of a 1-stage process for auricular reconstruction.

Efficacy of three-dimensionally printed polycaprolactone/beta tricalcium phosphate scaffold on mandibular reconstruction.

It has been demonstrated that development of three-dimensional printing technology has supported the researchers and surgeons to apply the bone tissue engineering to the oromandibular reconstruction. In this study, poly caprolactone/beta tricalcium phosphate (PCL/ß-TCP) scaffolds were fabricated by multi-head deposition system. The feasibility of the three-dimensionally (3D) -printed PCL/ß-TCP scaffolds for mandibular reconstruction was examined on critical-sized defect of canine mandible. The scaffold contained the heterogeneous pore sizes for more effective bone ingrowth and additional wing structures for more stable fixation. They were implanted into the mandibular critical-sized defect of which periosteum was bicortically resected. With eight 1-year-old male beagle dogs, experimental groups were divided into 4 groups (n = 4 defects per group, respectively). (a) no further treatment (control), (b) PCL/ß-TCP scaffold alone (PCL/TCP), (c) PCL/ß-TCP scaffold with recombinant human bone morphogenetic protein-2 (rhBMP-2) (PCL/TCP/BMP2) and (d) PCL/ß-TCP scaffold with autogenous bone particles (PCL/TCP/ABP). In micro-computed tomography, PCL/TCP/BMP2 and PCL/TCP/ ABP groups showed significant higher bone volume in comparison to Control and PCL/TCP groups (P < 0.05). In histomorphometric analysis, a trend towards more bone formation was observed in PCL/TCP/BMP2 and PCL/TCP/ABP groups, but the results lacked statistical significance (P = 0.052). Within the limitations of the present study, 3D-printed PCL/ß-TCP scaffolds showed acceptable potential for oromandibular reconstruction.

Bioprinting of Multiscaled Hepatic Lobules within a Highly Vascularized Construct.

Highly vascularized complex liver tissue is generally divided into lobes, lobules, hepatocytes, and sinusoids, which can be viewed under different types of lens from the micro- to macro-scale. To engineer multiscaled heterogeneous tissues, a sophisticated and rapid tissue engineering approach is required, such as advanced 3D bioprinting. In this study, a preset extrusion bioprinting technique, which can create heterogeneous, multicellular, and multimaterial structures simultaneously, is utilized for creating a hepatic lobule (≈1 mm) array. The fabricated hepatic lobules include hepatic cells, endothelial cells, and a lumen. The endothelial cells surround the hepatic cells, the exterior of the lobules, the lumen, and finally, become interconnected with each other. Compared to hepatic cell/endothelial cell mixtures, the fabricated hepatic lobule shows higher albumin secretion, urea production, and albumin, MRP2, and CD31 protein levels, as well as, cytochrome P450 enzyme activity. It is found that each cell type with spatial cell patterning in bioink accelerates cellular organization, which could preserve structural integrity and improve cellular functions. In conclusion, preset extruded hepatic lobules within a highly vascularized construct are successfully constructed, enabling both micro- and macro-scale tissue fabrication, which can support the creation of large 3D tissue constructs for multiscale tissue engineering.

Restoration of the inferomedial orbital strut using a standardized three-dimensional printing implant.

The inferomedial orbital strut (IOS) is the thin bony junction of the orbital medial wall and floor. Its fracture is common and leads to serious complications, including enophthalmos, globe dystopia and diplopia. However, anatomical restoration of the IOS is challenging owing to reduced structural support; sound anatomical background and accurate implants are therefore essential. The aim of the present study was to incorporate data from cadaveric orbit anatomy into three-dimensional (3D) printing technology and to reconstruct the complex orbital fracture elaborately. After averaging the data from computed tomography (CT) images of 100 adult cadavers, the dimensions of the IOS were extracted, and a tangent sphere was created using a computer-aided design program. The curves were compared with the CT data of 10 adult patients from the simulation test. Based on these data, a standardized 3D implant, 1.15 mm thick, was designed using polycaprolactone. The implant was placed in five patients with complex orbital fractures. The radius of the sphere in contact with the orbit, measuring 33.54 mm, was confirmed to be appropriate. A comparison between the normal side volume (V0) and the postoperative volume (Vpost ) showed that they were statistically similar. Furthermore, a comparison between V0 and the preoperative volume (Vpre ), and Vpost compared with Vpre also showed a statistically significant difference (P < 0.05). On follow-up, the preoperative ocular symptoms were resolved. The orbital data obtained from 100 cadavers provided standardized orbital anatomy, and 3D printed implants were created. The implants were anatomically accurate with regard to the orbital cavity and adequately covered the simulation model. The implant also showed satisfactory results when applied clinically in actual patients.

Bone Morphogenetic Protein 2-Conjugated Silica Particles Enhanced Early Osteogenic Differentiation of Adipose Stem Cells on the Polycaprolactone Scaffold.

Background: Silica particles (SPs) induce cell proliferation and osteogenic differentiation. We reported that SPs in the scaffold induced early stage osteogenic differentiation. Methods: A polycaprolactone (PCL) scaffold was fabricated with a 10 wt% SPs. The surface of PCL scaffold was coated with a 10 µg/mL collagen solution. Next, the scaffold was conjugated with 2 µM SPs, 2 µg/mL bone morphogenetic protein 2 (BMP2), or 2 µM BMP2-conjugated SPs (BCSPs). Green fluorescent protein-coupled BMP2 was applied to fabricate the scaffold. The fluorescence intensity was analyzed by confocal microscopy. The mRNA levels of the early osteogenic differentiation marker, alkaline phosphatase (ALP), were analyzed by real-time quantitative polymerase chain reaction. Levels of BMP2, RUNX2, ERK1/2, and AKT were assessed by western blotting. Results: ALP mRNA levels were significantly higher in the BCSP-conjugated scaffold than in the other scaffolds. In the early stage of osteogenic differentiation, the protein levels of BMP2, RUNX2, ERK1/2, and AKT in cells were significantly higher in the BCSP-conjugated scaffold than in other scaffolds. Thus, the BCSP composite scaffold induced rapid osteogenic differentiation. Conclusion: These results suggest that BCSP composite can be used to promote early stage osteogenic differentiation and show promise as a material for use in scaffolds for bone regeneration.

A potential dermal substitute using decellularized dermis extracellular matrix derived bio-ink.

Upon bioprinting, cells are mixed with a biomaterial to fabricate a living tissue, thus emphasizing the importance of biomaterials. The biomaterial used in this study was a bio-ink prepared using skin decellularized extracellular matrix (dECM). Skin dECM was extracted by treating the dermis with chemicals and enzymes; the basic structural and functional proteins of the ECM, including collagen, glycosaminoglycans (GAGs), bioreactive materials and growth factors, were preserved, whereas the resident cells that might cause immune rejection or inflammatory responses were removed. The bio-ink based on dECM powder, together with human dermal fibroblasts (HDFs), was loaded into the nozzle of the 3D bioprinter to create the 3D construct. This construct underwent gelation with changing temperature while its shape was maintained for 7 days. The cells showed over 90% viability and proliferation. By analysing the gene expression pattern in the cells of the construct, the skin regenerative mechanism of the bio-ink was verified. Microarray results confirmed that the gene expression related to skin morphology and development had been enhanced because the bioreactive molecules and growth factors, in addition to residual ECM in dECM, provided an optimal condition for the HDFs.

New clinical application of three-dimensional-printed polycaprolactone/ß-tricalcium phosphate scaffold as an alternative to allograft bone for limb-sparing surgery in a dog with distal radial osteosarcoma.

Limb-sparing surgery is one of the surgical options for dogs with distal radial osteosarcoma (OSA). This case report highlights the novel application of a three-dimensional (3D)-printed patient-specific polycaprolactone/ß-tricalcium phosphate (PCL/ß-TCP) scaffold in limb-sparing surgery in a dog with distal radial OSA. The outcomes evaluated included postoperative gait analysis, complications, local recurrence of tumor, metastasis, and survival time. Post-operative gait evaluation showed significant improvement in limb function, including increased weight distribution and decreased asymmetry. The implant remained well in place and increased bone opacity was observed between the host bone and the scaffold. There was no complication due to scaffold or surgery. Significant improvement in limb function and quality of life was noted postoperatively. Local recurrence and pulmonary metastasis were identified at 8 weeks postoperatively. The survival time from diagnosis of OSA to death was 190 days. The PCL/ß-TCP scaffold may be an effective alternative to cortical allograft in limb-sparing surgery for bone tumors.

Ideal scaffold design for total ear reconstruction using a three-dimensional printing technique.

Ear reconstruction using three-dimensional (3D) printing technique has been considered as a good substitute for conventional surgery, because it can provide custom-made 3D framework. However, there are difficulties with its application in clinical use. Researchers have reported 3D scaffolds for ear cartilage regeneration, but the designs of the 3D scaffolds were not appropriate to be used in surgery. Hence, we propose the design of an ideal 3D ear scaffold for use in ear reconstruction surgery. Facial computed tomography (CT) images of the unaffected ear were extracted using a "segmentation" procedure. The selected data were converted to a 3D model and mirrored to create a model of the affected side. The design of 3D model was modified to apply to Nagata's two-stage surgery. Based on the 3D reconstructed model, a 3D scaffold was 3D printed using polycaprolactone. The 3D scaffold closely resembled the real cartilage framework used in current operations in terms of ear anatomy. To account for skin thickness, the 3D scaffold was made 4 mm smaller than the real ear. Furthermore, 2 mm pores were included to allow the implantation of diced cartilage to promote regeneration of the cartilage. 3D printing technology can overcome the limitations of previous auricular reconstruction methods. Further studies are required to achieve a functional and stable substitute for auricular cartilage and to extend the clinical use of the 3D-printed construct. Additionally, the ethical and legal issues regarding the transplantation of 3D-printed constructs and cell culture technologies using human stem cells remain to be solved. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1295-1303, 2019.

Effects of three-dimensionally printed polycaprolactone/ß-tricalcium phosphate scaffold on osteogenic differentiation of adipose tissue- and bone marrow-derived stem cells.

BACKGROUND: Autogenous bone grafts have several limitations including donor-site problems and insufficient bone volume. To address these limitations, research on bone regeneration is being conducted actively. In this study, we investigate the effects of a three-dimensionally (3D) printed polycaprolactone (PCL)/tricalcium phosphate (TCP) scaffold on the osteogenic differentiation potential of adipose tissue-derived stem cells (ADSCs) and bone marrow-derived stem cells (BMSCs). METHODS: We investigated the extent of osteogenic differentiation on the first and tenth day and fourth week after cell culture. Cytotoxicity of the 3D printed PCL/ß-TCP scaffold was evaluated by 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium assay, prior to osteogenic differentiation analysis. ADSCs and BMSCs were divided into three groups: C, only cultured cells; M, cells cultured in the 3D printed PCL/ß-TCP scaffold; D, cells cultured in the 3D printed PCL/ß-TCP scaffold with a bone differentiation medium. Alkaline phosphatase (ALP) activity assay, von Kossa staining, reverse transcription-polymerase chain reaction (RT-PCR), and Western blotting were performed for comparative analysis. RESULTS: ALP assay and von Kossa staining revealed that group M had higher levels of osteogenic differentiation compared to group C. RT-PCR showed that gene expression was higher in group M than in group C, indicating that, compared to group C, osteogenic differentiation was more extensive in group M. Expression levels of proteins involved in ossification were higher in group M, as per the Western blotting results. CONCLUSION: Osteogenic differentiation was increased in mesenchymal stromal cells (MSCs) cultured in the 3D printed PCL/TCP scaffold compared to the control group. Osteogenic differentiation activity of MSCs cultured in the 3D printed PCL/TCP scaffold was lower than that of cells cultured on the scaffold in bone differentiation medium. Collectively, these results indicate that the 3D printed PCL/TCP scaffold promoted osteogenic differentiation of MSCs and may be widely used for bone tissue engineering.

Clinical Application of 3-Dimensional Printing Technology for Patients With Nasal Septal Deformities: A Multicenter Study.

Importance: Studies have shown the controllability and porosity of polycaprolactone as well as the use of 3-dimensional (3-D) printing for nasal reconstruction in animal models. The utility of polycaprolactone with 3-D technology in nasal cartilaginous framework reconstruction in humans remains unknown. Objective: To investigate the safety and efficacy of 3-D printed, bioresorbable polycaprolactone nasal implants. Design, Setting, and Participants: This multicenter clinical trial comprised 20 patients with caudal septal deviations who underwent septoplasty, which used a 3-D printed polycaprolactone mesh, at 2 centers in South Korea. Patients were included if they were aged 18 to 74 years and had nasal septal deviations, Nasal Obstruction Symptom Evaluation scores greater than 20, and persistent nasal obstructions. Twenty-two patients met the inclusion criteria, but 2 patients were excluded before the operation. The study was conducted from July 1, 2016, to June 30, 2017. Main Outcomes and Measures: The change in total Nasal Obstruction Symptom Evaluation score between the preoperative examination and the week 12 postoperative examination was the primary outcome. Changes in bilateral nasal cavity minimum cross-sectional area and volume on acoustic rhinometry at weeks 4 and 12 after the operation as well as changes in the nasal cavity cross-sectional area at the osteomeatal unit and nasal septum angle in the paranasal sinus on computed tomography after week 12 were among the secondary outcomes. Results: Of the 20 patients included in the study, 4 (20%) were female, 16 (80%) were male, with a mean (SD) age of 34.95 (11.96) years. The preoperative and week 12 postoperative results revealed significant changes in the minimal cross-sectional areas on acoustic rhinometry (0.41 [SD, 0.39] vs -0.11 [SD, 0.18]; difference, 0.42; 95% CI, 0.23-0.61), nasal septum angles on computed tomography (11.22 [SD, 6.57] vs 2.89 [SD, 3.12]; difference, 8.33; 95% CI, 5.08-11.58), and Nasal Obstruction Symptom Evaluation scores (73.50 [SD, 19.88] vs 3.75 [SD, 6.26]; difference, 69.75; 95% CI, 59.22-80.28). The surgeons' convenience level with the procedure was favorable (visual analog scale score [SD], 90.90 [9.45]), and so were the patients' symptom improvements and satisfaction after 12 weeks (visual analog scale score [SD], 88.30 [9.87]). Conclusions and Relevance: The 3-D printed, homogeneous, composite, microporous polycaprolactone nasal implant demonstrated proper mechanical support and thinness with excellent biocompatibility and surgical manipulability. Polycaprolactone may be a clinically biocompatible material for use in various craniofacial reconstructions in the future.