RESUMEN
Recently, the growing demand for amorphous oxide semiconductor thin-film transistors (AOS TFTs) with high mobility and good stability to implement ultrahigh-resolution displays has made tracking the role of hydrogen in oxide semiconductor films increasingly important. Hydrogen is an essential element that contributes significantly to the field effect mobility and bias stability characteristics of AOS TFTs. However, because hydrogen is the lightest atom and has high reactivity to metal and oxide materials, elucidating its impact on AOS thin films has been challenging. Therefore, in this study, we propose controlling the hydrogen quantities in amorphous InSnZnO (a-ITZO) thin films through thermal dehydrogenation to precisely reveal the hydrogen influences on the electrical characteristics of a-ITZO TFTs. The as-deposited device containing 15.69 × 1015 atoms/cm2 of hydrogen exhibited a relatively low saturation mobility of 18.1 cm2/V·s and poor positive bias stress stability. However, depending on the extent of thermal dehydrogenation, not only did the hydrogen quantity and interface defect density (DIT) decrease but also the conductivity and surface energy increased due to the rise in oxygen vacancies and hydroxyl groups in a-ITZO thin films. As a result, the a-ITZO TFT with a hydrogen amount of 4.828 × 1015 atoms/cm2 showed that the saturation mobility improved up to 36.8 cm2/V·s, and positive bias stress stability was remarkably enhanced. Hence, we report the ability to manage the hydrogen quantity with thermal dehydrogenation and demonstrate that high-performance a-ITZO TFTs can be realized when an appropriate hydrogen concentration is achieved.
RESUMEN
In cancer therapy, photodynamic therapy (PDT) has attracted significant attention due to its high potential for tumor-selective treatment. However, PDT agents often exhibit poor physicochemical properties, including solubility, necessitating the development of nanoformulations. In this study, we developed two cationic peptide-based self-assembled nanomaterials by using a PDT agent, chlorin e6 (Ce6). To manufacture biocompatible nanoparticles based on peptides, we used the cationic poly-L-lysine peptide, which is rich in primary amines. We prepared low- and high-molecular-weight poly-L-lysine, and then evaluated the formation and performance of nanoparticles after chemical conjugation with Ce6. The results showed that both molecules formed self-assembled nanoparticles by themselves in saline. Interestingly, the high-molecular-weight poly-L-lysine and Ce6 conjugates (HPLCe6) exhibited better self-assembly and PDT performance than low-molecular-weight poly-L-lysine and Ce6 conjugates (LPLCe6). Moreover, the HPLCe6 conjugates showed superior cellular uptake and exhibited stronger cytotoxicity in cell toxicity experiments. Therefore, it is functionally beneficial to use high-molecular-weight poly-L-lysine in the manufacturing of poly-L-lysine-based self-assembling biocompatible PDT nanoconjugates.
Asunto(s)
Clorofilidas , Peso Molecular , Nanopartículas , Fotoquimioterapia , Fármacos Fotosensibilizantes , Polilisina , Porfirinas , Polilisina/química , Porfirinas/química , Porfirinas/farmacología , Humanos , Nanopartículas/química , Fármacos Fotosensibilizantes/química , Fármacos Fotosensibilizantes/farmacología , Fármacos Fotosensibilizantes/síntesis química , Supervivencia Celular/efectos de los fármacosRESUMEN
Purpose: This study aims to develop and examine the psychometric properties of the "Preparedness for Transition to Survivorship Care Instrument" (PTSCI) for cancer survivors. Methods: A cross-sectional study of cancer survivors in Korea was conducted to test the reliability and validity of the PTSCI. Exploratory factor analysis (EFA), confirmatory factor analysis (CFA), and concurrent validity tests were conducted. Results: The EFA showed that the 7-factor structure of a 34-item PTSCI accounted for 61.5% of the total observed variance. In CFA, three competing models were created and compared to a seven-factor solution model. A 6-factor 31-item model showed the best fit and was chosen as the final PTSCI model. PTSCI is significantly associated with quality of life, psychological distress, and health promotion. Conclusions: PTSCI can be helpful in preparing for diverse psychosocial and behavioral issues faced by cancer survivors in the survivorship phase.
RESUMEN
BACKGROUND: Since the introduction of heated tobacco products (HTPs) in Korea in 2017, their annual sales have increased. Several studies have investigated the perceptions of HTPs and smoking cessation behaviors. For the first time, In 2019, questions focused on HTP use were introduced in the Korea National Health and Nutrition Examination Survey (KNHNES). This study aimed to compare smoking cessation behaviors between HTP users and conventional cigarette smokers using KNHANES data. METHODS: Data of 947 current adult smokers from the 8th KNHNES (2019) were analyzed. Current smokers were divided into conventional cigarette (CC)-only, HTP-only, and dual-use groups. The general characteristics of the three groups were investigated. Differences in current intention to quit smoking and past attempts to quit smoking among the three groups were analyzed using multivariate logistic regression analysis by IBM SPSS ver. 25.0. RESULTS: HTP-only users demonstrated fewer future smoking cessation plans (adjusted odds ratio [AOR], 0.398; 95% confidence interval [CI], 0.195-0.813; P=0.012) and fewer smoking cessation attempts in the past year (AOR, 0.533; 95% CI, 0.298-0.954; P=0.034) than CC-only smokers. However, there was no significant difference between dual-use (CC+HTP) and CC-only smokers. CONCLUSION: While dual-use and CC-only smokers showed similar smoking cessation behaviors, HTP-only users had fewer previous attempts to quit smoking and were less likely to be currently ready to quit smoking. These findings can be explained by a decrease in the need to quit smoking due to the convenience of HTP and the perception that HTPs are less harmful than CC.
RESUMEN
An integrated textile electronic system is reported here, enabling a truly free form factor system via textile manufacturing integration of fiber-based electronic components. Intelligent and smart systems require freedom of form factor, unrestricted design, and unlimited scale. Initial attempts to develop conductive fibers and textile electronics failed to achieve reliable integration and performance required for industrial-scale manufacturing of technical textiles by standard weaving technologies. Here, we present a textile electronic system with functional one-dimensional devices, including fiber photodetectors (as an input device), fiber supercapacitors (as an energy storage device), fiber field-effect transistors (as an electronic driving device), and fiber quantum dot light-emitting diodes (as an output device). As a proof of concept applicable to smart homes, a textile electronic system composed of multiple functional fiber components is demonstrated, enabling luminance modulation and letter indication depending on sunlight intensity.
RESUMEN
InP quantum dots (QDs) are attracting significant interest as a potentially less toxic alternative to Cd-based QDs in many research areas. Although InP-based core/shell QDs with excellent photoluminescence properties have been reported so far, sophisticated interface treatment to eliminate defects is often necessary. Herein, using aminophosphine as a seeding source of phosphorus, we find that H2S can be efficiently generated from the reaction between a thiol and an alkylamine at high temperatures. Apart from general comprehension that H2S acts as a S precursor, it is revealed that with core etching by H2S, the interface between InP and ZnS can be reconstructed with S2- incorporation. Such a transition layer can reduce inherent defects at the interface, resulting in significant photoluminescence (PL) enhancement. Meanwhile, the size of the InP core could be further controlled by H2S etching, which offers a feasible process to obtain wide band gap InP-based QDs with blue emission.
RESUMEN
We propose a computational design framework to design the architecture of a white lighting system having multiple pixelated patterns of electric-field-driven quantum dot light-emitting diodes. The quantum dot of the white lighting system has been optimised by a system-level combinatorial colour optimisation process with the Nelder-Mead algorithm used for machine learning. The layout of quantum dot patterns is designed precisely using rigorous device-level charge transport simulation with an electric-field dependent charge injection model. A theoretical maximum of 97% colour rendering index has been achieved with red, green, cyan, and blue quantum dot light-emitting diodes as primary colours. The white lighting system has been fabricated using the transfer printing technique to validate the computational design framework. It exhibits excellent lighting performance of 92% colour rendering index and wide colour temperature variation from 1612 K to 8903 K with only the four pixelated quantum dots as primary.
RESUMEN
We aim to investigate common diagnoses and risk factors for emergency department (ED) visits as well as those for hospitalization and death after ED visits. This study describes the clinical course of ED visits by using the 2014-2015 population data retrieved from the National Health Insurance Service. Sociodemographic, medical, and behavioral factors were analyzed through multiple logistic regression. Older people were more likely to be hospitalized or to die after an ED visit, but younger people showed a higher risk for ED visits. Females were at a higher risk for ED visits, but males were at a higher risk for ED-associated hospitalization and death. Individuals in the highest quartile of income had a lower risk of ED death relative to lowest income level individuals. Disabilities, comorbidities, and medical issues, including previous ED visits or prior hospitalizations, were risk factors for all ED-related outcomes. Unhealthy behaviors, including current smoking, heavy alcohol consumption, and not engaging in regular exercise, were also significantly associated with ED visits, hospitalization, and death. Common diagnoses and risk factors for ED visits and post-visit hospitalization and death found in this study provide a perspective from which to establish health polices for the emergency medical care system.
RESUMEN
An artificial muscle actuator resolves practical engineering problems in compact wearable devices, which are limited to conventional actuators such as electromagnetic actuators. Abstracting the fundamental advantages of an artificial muscle actuator provides a small-scale, high-power actuating system with a sensing capability for developing varifocal augmented reality glasses and naturally fit haptic gloves. Here, we design a shape memory alloy-based lightweight and high-power artificial muscle actuator, the so-called compliant amplified shape memory alloy actuator. Despite its light weight (0.22 g), the actuator has a high power density of 1.7 kW/kg, an actuation strain of 300% under 80 g of external payload. We show how the actuator enables image depth control and an immersive tactile response in the form of augmented reality glasses and two-way communication haptic gloves whose thin form factor and high power density can hardly be achieved by conventional actuators.
Asunto(s)
Realidad Aumentada , Dispositivos Electrónicos Vestibles , Diseño de Equipo , Músculos , Aleaciones con Memoria de FormaRESUMEN
The optimal blood pressure (BP) target in older people according to frailty status remains uncertain. This article investigates how frailty affects the association between BP and cardiovascular diseases or mortality, specifically in young-old adults. A retrospective cohort was created for 708,964 older adults with a uniform age of 66 years. The association between BP and myocardial infarction (MI), stroke, or mortality was analyzed using Cox proportional hazards models. The Timed Up and Go test (TUG) was used as a measure of physical frailty. Mean follow-up was 6.8 years, detecting 38,963 (5.5%) events. There was a linear association between increasing systolic BP (SBP) or diastolic BP (DBP) and increased risk of incident MI and stroke, compared to the reference BP (SBP, 110−119 mmHg or DBP, 80−89 mmHg). The risk patterns with high BP remained similar in each TUG group (<10, 10−14, or ≥15 s). A similar pattern of increased risks was found in those who took antihypertensive drugs and who did not, however they were more pronounced in those who did not. The findings support the need to achieve the same BP target in young-old adults with or without frailty to lower the risk of MI, stroke, and mortality.
RESUMEN
Smart textiles consist of discrete devices fabricated from-or incorporated onto-fibres. Despite the tremendous progress in smart textiles for lighting/display applications, a large scale approach for a smart display system with integrated multifunctional devices in traditional textile platforms has yet to be demonstrated. Here we report the realisation of a fully operational 46-inch smart textile lighting/display system consisting of RGB fibrous LEDs coupled with multifunctional fibre devices that are capable of wireless power transmission, touch sensing, photodetection, environmental/biosignal monitoring, and energy storage. The smart textile display system exhibits full freedom of form factors, including flexibility, bendability, and rollability as a vivid RGB lighting/grey-level-controlled full colour display apparatus with embedded fibre devices that are configured to provide external stimuli detection. Our systematic design and integration strategies are transformational and provide the foundation for realising highly functional smart lighting/display textiles over large area for revolutionary applications on smart homes and internet of things (IoT).
RESUMEN
BACKGROUND: Nonalcoholic fatty liver disease is considered to be the hepatic component of metabolic syndrome (MetS). However, the association between changes in MetS status and the risk of liver cirrhosis (LC) has not been investigated to date. This study assessed the association between changes in MetS and subsequent nonviral LC development. METHODS: Data were obtained from the Korean National Health Insurance Service. Individuals who participated in health screenings from both 2009 to 2010 and 2011 to 2012 were included. The primary outcome was LC development according to the static and dynamic MetS status. Subjects were stratified into four groups according to the change in MetS status observed from the two-year interval screening (2009-2011). Cox regression analysis was used to examine the hazard ratios of LC. RESULTS: During a median of 7.3 years of follow-up, 24,923 incident LC cases developed among 5,975,308 individuals. After adjusting for age, sex, smoking, alcohol, regular exercise, and body mass index, the adjusted hazard ratios (95% confidence intervals) for LC development were 1.39 (1.33-1.44) for the MetS-Developed group, 1.32 (1.26-1.37) for the MetS-Recovered group, and 1.51 (1.45-1.56) for the MetS-Sustained group, relative to the MetS-Free group. Stratified analyses according to age, sex, smoking, alcohol intake, exercise, diabetes mellitus, hypertension, dyslipidemia, and chronic kidney disease showed similar results. CONCLUSIONS: Both static and dynamic MetS status are independent risk factors for LC development. The risk of LC was the highest in people with sustained MetS and was lower in the MetS-Recovered group than in the MetS-Sustained group. These results suggest that improving a person's MetS status may be helpful in preventing LC.
RESUMEN
Several studies have suggested that estrogens have a protective function against lymphomagenesis. The treatment of breast cancer is driven by subtype classification, and the assessment of hormone receptor status is important for treatment selection. Thus, we evaluated the association between breast cancer and the incidence of NHL. We conducted a retrospective cohort study using a population-based nationwide registry in South Korea. We selected all women with newly diagnosed breast cancer between January 1st, 2002 and December 31st, 2016 who received curative treatment (N = 84,969) and a 1:10 sample of age-matched non-breast cancer controls (N = 1,057,674). Incident breast cancer (time-varying exposure) was the exposure and development of any type of NHL, including diffuse large B-cell lymphoma (DLBCL), follicular lymphoma (FL), mature T/NK-cell lymphomas, anaplastic large cell lymphoma (ALCL), and unspecified types of NHL, was the outcome. During follow-up, 1564 incident cases of NHL occurred. The fully adjusted Hazard Ratio (HR) for NHL associated with the development of breast cancer was 1.64 (95% CI = 1.34-2.00) after adjusting for body mass index, alcohol intake, physical activity, smoking, income, and comorbidity. The adjusted HR for NHL was much higher in participants who were aged <50 years and who received hormone therapy (either tamoxifen or aromatase inhibitors) than in those ≥50 years or who did not receive hormone therapy, respectively. The development of breast cancer was associated with a significantly increased risk of NHL, particularly follicular lymphoma and mature T/NK-cell lymphoma. In particular, the risk of NHL was higher in patients receiving hormone therapy and in younger patients.
Asunto(s)
Neoplasias de la Mama/complicaciones , Linfoma no Hodgkin/etiología , Adulto , Supervivientes de Cáncer , Femenino , Humanos , Persona de Mediana Edad , República de Corea/epidemiología , Estudios Retrospectivos , Factores de RiesgoRESUMEN
Postoperative gastrointestinal bleeding (PGIB) is a serious complication with expensive medical costs and a high mortality rate. This study aims to analyze the incidence of PGIB and its associated factors, including its relationship with postoperative analgesic use. Patients aged ≥20 years who received various kinds of surgery from 2013 to 2017 were included (n = 1,319,807). PGIB was defined by admission with ICD-10 codes of gastrointestinal bleeding plus transfusion within 2 months after surgery. A total of 3505 (0.27%) subjects had PGIB, and the incidence was much higher for those who underwent major gastrointestinal and major cardiovascular surgery (1.9% for both), followed by major head and neck (0.7%), major genitourinary (0.5%), and orthopedic surgery (0.45%). On multivariate analysis, older age, male sex, lower income, comorbidities, peptic ulcer disease, and congestive heart failure were associated with a higher risk of gastrointestinal bleeding. Among analgesics, steroid use was associated with increased postoperative bleeding risk (adjusted OR: 1.36, 95% CI: 1.25-1.48). Acetaminophen/nonsteroidal anti-inflammatory drugs, cyclooxygenase 2 inhibitors, anticonvulsants, antidepressants, and opioids were not associated with increased risk. PGIB is considerable for major surgeries, and its risk should be considered, especially for patients with older age and comorbidities and use of steroids.
RESUMEN
Soft grippers that incorporate functional materials are important in the development of mechanically compliant and multifunctional interfaces for both sensing and stimulating soft objects and organisms. In particular, the capability for firm and delicate grasping of soft cells and organs without mechanical damage is essential to identify the condition of and monitor meaningful biosignals from objects. Here, we report a millimeter-scale soft gripper based on a shape memory polymer that enables manipulating a heavy object (payload-to-weight ratio up to 6400) and grasping organisms at the micro/milliscale. The silver nanowires and crack-based strain sensor embedded in this soft gripper enable simultaneous measurement of the temperature and pressure on grasped objects and offer temperature and mechanical stimuli for the grasped object. We validate our miniaturized soft gripper by demonstrating that it can grasp a snail egg while simultaneously applying a moderate temperature stimulation to induce hatching process and monitor the heart rate of a newborn snail. The results present the potential for widespread utility of soft grippers in the area of biomedical engineering, especially in the development of conditional or closed-loop interfacing with microscale biotissues and organisms.
Asunto(s)
Ingeniería Biomédica , Diseño de Equipo , Fuerza de la Mano/fisiología , Robótica , Materiales Inteligentes/química , Caracoles/fisiología , Animales , Bioingeniería , Biomimética , Biotecnología/métodos , Calibración , Módulo de Elasticidad , Humanos , Sistemas Hombre-Máquina , Ensayo de Materiales , Nanocables , Presión , Estrés Mecánico , TemperaturaRESUMEN
To elucidate potential causality between smoking and alcohol intake on thyroid cancer incidence, we explored the effect of changes in smoking and alcohol consumption habits. From the Korean National Health Insurance database, we identified 4,430,070 individuals who participated in the national health screening program in 2009 and 2011. The level of smoking and alcohol consumption was measured twice, once in 2009 and again in 2011. The risk of thyroid cancer according to their changes was estimated using the Cox proportional hazard model. During the mean follow-up period of 6.32 ± 0.72 years, 29,447 individuals were diagnosed with thyroid cancer. Compared to those who sustained not smoking, non-smokers who initiated smoking to light (adjusted hazard ratio (aHR) 0.96, 95% confidence interval (CI) 0.81-1.15), moderate (aHR 0.90, 95% CI 0.78-1.04), and heavy level (aHR 0.81, 95% CI 0.69-0.96) had a decreased risk of thyroid cancer. Heavy smokers who quit smoking had an increased risk of thyroid cancer (aHR 1.23, 95% CI 1.06-1.42) compared to those who sustained heavy smoking. Change in drinking status was not significantly associated with thyroid cancer risk compared to drinking at the same level, although a non-significant trend of increased risk was noted in quitters. Participants who initiated both smoking and drinking (HR 0.80, 95% CI 0.69-0.93) had a lower risk of thyroid cancer compared with those who continued not to smoke and drink. Our findings provide further evidence that smoking, and possibly alcohol consumption, would have true protective effects on the development of thyroid cancer.
RESUMEN
Quantum dot light-emitting diodes (QD-LEDs) are widely recognised as great alternatives to organic light-emitting diodes (OLEDs) due to their enhanced performances. This focus article surveys the current progress on the state-of-the-art QD-LED technology including material synthesis, device optimization and innovative fabrication processes. A discussion on the material synthesis of core nanocrystals, shell layers and surface-binding ligands is presented for high photoluminescence quantum yield (PLQY) quantum dots (QDs) using heavy-metal free materials. The operational principles of several types of QD-LED device architectures are also covered, and the recent evolution of device engineering technologies is investigated. By exploring the fabrication process for pixel-patterning of QD-LEDs on an active-matrix backplane for full-colour display applications, we anticipate further improvement in device performance for the commercialisation of next-generation displays.
RESUMEN
We report on the design, fabrication, and characterization of heterostructure In-Zn-O (IZO) thin-film transistors (TFTs) with improved performance characteristics and robust operation. The heterostructure layer is fabricated by stacking a solution-processed IZO film on top of a buffer layer, which is deposited previously using an electron beam (e-beam) evaporator. A thin buffer layer at the dielectric interface can help to template the structure of the channel. The control of the precursors and of the solvent used during the sol-gel process can help lower the temperature needed for the sol-gel condensation reaction to proceed cleanly. This boosts the overall performance of the device with a significantly reduced subthreshold swing, a four-fold mobility increase, and a two-order of magnitude larger on/off ratio. Atomistic simulations of the a-IZO structure using molecular dynamics (both classical and ab initio) and hybrid density functional theory (DFT) calculations of the electronic structure reveal the potential atomic origin of these effects.
RESUMEN
To fully exploit van der Waals materials and their vertically stacked heterostructures, new mass-scalable production routes which are low cost but preserve the high electronic and optical quality of the single crystals are required. Here, we demonstrate an approach to realise a variety of functional heterostructures based on van der Waals nanocrystal films produced through the mechanical abrasion of bulk powders. We find significant performance enhancements in abraded heterostructures compared to those fabricated through inkjet printing of nanocrystal dispersions. To highlight the simplicity, applicability and scalability of the device fabrication, we demonstrate a multitude of different functional heterostructures such as resistors, capacitors and photovoltaics. We also demonstrate the creation of energy harvesting devices, such as large area catalytically active coatings for the hydrogen evolution reaction and enhanced triboelectric nanogenerator performance in multilayer films. The ease of device production makes this a promising technological route for up-scalable films and heterostructures.
RESUMEN
BACKGROUND: In the era of information overload, natural language processing (NLP) techniques are increasingly needed to support advanced biomedical information management and discovery applications. In this paper, we present an in-depth description of SemRep, an NLP system that extracts semantic relations from PubMed abstracts using linguistic principles and UMLS domain knowledge. We also evaluate SemRep on two datasets. In one evaluation, we use a manually annotated test collection and perform a comprehensive error analysis. In another evaluation, we assess SemRep's performance on the CDR dataset, a standard benchmark corpus annotated with causal chemical-disease relationships. RESULTS: A strict evaluation of SemRep on our manually annotated dataset yields 0.55 precision, 0.34 recall, and 0.42 F 1 score. A relaxed evaluation, which more accurately characterizes SemRep performance, yields 0.69 precision, 0.42 recall, and 0.52 F 1 score. An error analysis reveals named entity recognition/normalization as the largest source of errors (26.9%), followed by argument identification (14%) and trigger detection errors (12.5%). The evaluation on the CDR corpus yields 0.90 precision, 0.24 recall, and 0.38 F 1 score. The recall and the F 1 score increase to 0.35 and 0.50, respectively, when the evaluation on this corpus is limited to sentence-bound relationships, which represents a fairer evaluation, as SemRep operates at the sentence level. CONCLUSIONS: SemRep is a broad-coverage, interpretable, strong baseline system for extracting semantic relations from biomedical text. It also underpins SemMedDB, a literature-scale knowledge graph based on semantic relations. Through SemMedDB, SemRep has had significant impact in the scientific community, supporting a variety of clinical and translational applications, including clinical decision making, medical diagnosis, drug repurposing, literature-based discovery and hypothesis generation, and contributing to improved health outcomes. In ongoing development, we are redesigning SemRep to increase its modularity and flexibility, and addressing weaknesses identified in the error analysis.