Compositional and temporal division of labor modulates mixed sugar fermentation by an engineered yeast consortium.

Synthetic microbial communities have emerged as an attractive route for chemical bioprocessing. They are argued to be superior to single strains through microbial division of labor (DOL), but the exact mechanism by which DOL confers advantages remains unclear. Here, we utilize a synthetic Saccharomyces cerevisiae consortium along with mathematical modeling to achieve tunable mixed sugar fermentation to overcome the limitations of single-strain fermentation. The consortium involves two strains with each specializing in glucose or xylose utilization for ethanol production. By controlling initial community composition, DOL allows fine tuning of fermentation dynamics and product generation. By altering inoculation delay, DOL provides additional programmability to parallelly regulate fermentation characteristics and product yield. Mathematical models capture observed experimental findings and further offer guidance for subsequent fermentation optimization. This study demonstrates the functional potential of DOL in bioprocessing and provides insight into the rational design of engineered ecosystems for various applications.

Novel Signal Peptides and Episomal Plasmid System for Enhanced Protein Secretion in Engineered Bacteroides Species.

The genus Bacteroides, a predominant group in the human gut microbiome, presents significant potential for microbiome engineering and the development of live biotherapeutics aimed at treating gut diseases. Despite its promising capabilities, tools for effectively engineering Bacteroides species have been limited. In our study, we have made a breakthrough by identifying novel signal peptides in Bacteroides thetaiotaomicron and Akkermansia muciniphila. These peptides facilitate efficient protein transport across cellular membranes in Bacteroides, a critical step for therapeutic applications. Additionally, we have developed an advanced episomal plasmid system. This system demonstrates superior protein secretion capabilities compared to traditional chromosomal integration plasmids, making it a vital tool for enhancing the delivery of therapeutic proteins in Bacteroides species. Initially, the stability of this episomal plasmid posed a challenge; however, we have overcome this by incorporating an essential gene-based selection system. This novel strategy not only ensures plasmid stability but also aligns with the growing need for antibiotic-free selection methods in clinical settings. Our work, therefore, not only provides a more robust secretion system for Bacteroides but also sets a new standard for the development of live biotherapeutics.

Engineered Methylococcus capsulatus Bath for efficient methane conversion to isoprene.

Isoprene has numerous industrial applications, including rubber polymer and potential biofuel. Microbial methane-based isoprene production could be a cost-effective and environmentally benign process, owing to a reduced carbon footprint and economical utilization of methane. In this study, Methylococcus capsulatus Bath was engineered to produce isoprene from methane by introducing the exogenous mevalonate (MVA) pathway. Overexpression of MVA pathway enzymes and isoprene synthase from Populus trichocarpa under the control of a phenol-inducible promoter substantially improved isoprene production. M. capsulatus Bath was further engineered using a CRISPR-base editor to disrupt the expression of soluble methane monooxygenase (sMMO), which oxidizes isoprene to cause toxicity. Additionally, optimization of the metabolic flux in the MVA pathway and culture conditions increased isoprene production to 228.1 mg/L, the highest known titer for methanotroph-based isoprene production. The developed methanotroph could facilitate the efficient conversion of methane to isoprene, resulting in the sustainable production of value-added chemicals.

Metabolic engineering of Saccharomyces cerevisiae for second-generation ethanol production from xylo-oligosaccharides and acetate.

Simultaneous intracellular depolymerization of xylo-oligosaccharides (XOS) and acetate fermentation by engineered Saccharomyces cerevisiae offers significant potential for more cost-effective second-generation (2G) ethanol production. In the present work, the previously engineered S. cerevisiae strain, SR8A6S3, expressing enzymes for xylose assimilation along with an optimized route for acetate reduction, was used as the host for expressing two ß-xylosidases, GH43-2 and GH43-7, and a xylodextrin transporter, CDT-2, from Neurospora crassa, yielding the engineered SR8A6S3-CDT-2-GH34-2/7 strain. Both ß-xylosidases and the transporter were introduced by replacing two endogenous genes, GRE3 and SOR1, that encode aldose reductase and sorbitol (xylitol) dehydrogenase, respectively, and catalyse steps in xylitol production. The engineered strain, SR8A6S3-CDT-2-GH34-2/7 (sor1Δ gre3Δ), produced ethanol through simultaneous XOS, xylose, and acetate co-utilization. The mutant strain produced 60% more ethanol and 12% less xylitol than the control strain when a hemicellulosic hydrolysate was used as a mono- and oligosaccharide source. Similarly, the ethanol yield was 84% higher for the engineered strain using hydrolysed xylan, compared with the parental strain. Xylan, a common polysaccharide in lignocellulosic residues, enables recombinant strains to outcompete contaminants in fermentation tanks, as XOS transport and breakdown occur intracellularly. Furthermore, acetic acid is a ubiquitous toxic component in lignocellulosic hydrolysates, deriving from hemicellulose and lignin breakdown. Therefore, the consumption of XOS, xylose, and acetate expands the capabilities of S. cerevisiae for utilization of all of the carbohydrate in lignocellulose, potentially increasing the efficiency of 2G biofuel production.

Synthesis and physicochemical characterization of acyl myricetins as potential anti-neuroexocytotic agents.

Acyl myricetins (monopropionyl-, dipropionyl-, and monooctanoyl-myricetin, termed as MP1, MP2, and MO1, respectively) were synthesized through enzymatic or non-enzymatic esterification reaction of myricetin aglycone. Structure study indicated the hydroxyl group at C4' in B-ring was highly susceptible to acylation. Over its parental myricetin, acylated compounds showed enhanced lipophilicity (from 7.4- to 26.3-fold) and oxidative stability (from 1.9- to 3.1-fold) on the basis of logP and decay rate, respectively. MO1, presenting the physicochemical superiority compared to the others, provided lowest EC50 value of 2.51 µM on inhibition of neutrotransmitter release and CC50 value of 59.0 µM, leading to widest therapeutic window. All myricetin esters did not show any irritation toxicity when assessed with a chicken embryo assay. This study describes information on acylation of myricetin that has not yet been explored, and suggests that MO1 has membrane fusion-arresting and anti-neuroexocytotic potential for industrial application due to its enhanced biological properties.

A Genetically Encoded Biosensor for the Detection of Levulinic Acid.

Levulinic acid (LA) is a valuable chemical used in fuel additives, fragrances, and polymers. In this study, we proposed possible biosynthetic pathways for LA production from lignin and poly(ethylene terephthalate). We also created a genetically encoded biosensor responsive to LA, which can be used for screening and evolving the LA biosynthesis pathway genes, by employing an LvaR transcriptional regulator of Pseudomonas putida KT2440 to express a fluorescent reporter gene. The LvaR regulator senses LA as a cognate ligand. The LA biosensor was first examined in an Escherichia coli strain and was found to be non-functional. When the host of the LA biosensor was switched from E. coli to P. putida KT2440, the LA biosensor showed a linear correlation between fluorescence intensity and LA concentration in the range of 0.156-10 mM LA. In addition, we determined that 0.156 mM LA was the limit of LA detection in P. putida KT2440 harboring an LA-responsive biosensor. The maximal fluorescence increase was 12.3-fold in the presence of 10 mM LA compared to that in the absence of LA. The individual cell responses to LA concentrations reflected the population-averaged responses, which enabled high-throughput screening of enzymes and metabolic pathways involved in LA biosynthesis and sustainable production of LA in engineered microbes.

Directed Evolution of Soluble α-1,2-Fucosyltransferase Using Kanamycin Resistance Protein as a Phenotypic Reporter for Efficient Production of 2'-Fucosyllactose.

2'-Fucosyllactose (2'-FL), the most abundant fucosylated oligosaccharide in human milk, has multiple beneficial effects on human health. However, its biosynthesis by metabolically engineered Escherichia coli is often hampered owing to the insolubility and instability of α-1,2-fucosyltransferase (the rate-limiting enzyme). In this study, we aimed to enhance 2'-FL production by increasing the expression of soluble α-1,2-fucosyltransferase from Helicobacter pylori (FucT2). Because structural information regarding FucT2 has not been unveiled, we decided to improve the expression of soluble FucT2 in E. coli via directed evolution using a protein solubility biosensor that links protein solubility to antimicrobial resistance. For such a system to be viable, the activity of kanamycin resistance protein (KanR) should be dependent on FucT2 solubility. KanR was fused to the C-terminus of mutant libraries of FucT2, which were generated using a combination of error-prone PCR and DNA shuffling. Notably, one round of the directed evolution process, which consisted of mutant library generation and selection based on kanamycin resistance, resulted in a significant increase in the expression level of soluble FucT2. As a result, a batch fermentation with the ΔL M15 pBCGW strain, expressing the FucT2 mutant (F#1-5) isolated from the first round of the directed evolution process, resulted in the production of 0.31 g/l 2'-FL with a yield of 0.22 g 2'-FL/g lactose, showing 1.72- and 1.51-fold increase in the titer and yield, respectively, compared to those of the control strain. The simple and powerful method developed in this study could be applied to enhance the solubility of other unstable enzymes.

Neuron-recognizable characteristics of peptides recombined using a neuronal binding domain of botulinum neurotoxin.

Recombinant peptides were designed using the C-terminal domain (receptor binding domain, RBD) and its subdomain (peptide A2) of a heavy chain of botulinum neurotoxin A-type 1 (BoNT/A1), which can bind to the luminal domain of synaptic vesicle glycoprotein 2C (SV2C-LD). Peptide A2- or RBD-containing recombinant peptides linked to an enhanced green fluorescence protein (EGFP) were prepared by expression in Escherichia coli. A pull-down assay using SV2C-LD-covered resins showed that the recombinant peptides for CDC297 BoNT/A1, referred to EGFP-A2' and EGFP-RBD', exhibited ≥ 2.0-times stronger binding affinity to SV2C-LD than those for the wild-type BoNT/A1. Using bio-layer interferometry, an equilibrium dissociation rate constant (KD) of EGFP-RBD' to SV2C-LD was determined to be 5.45 µM, which is 33.87- and 15.67-times smaller than the KD values for EGFP and EGFP-A2', respectively. Based on confocal laser fluorescence micrometric analysis, the adsorption/absorption of EGFP-RBD' to/in differentiated PC-12 cells was 2.49- and 1.29-times faster than those of EGFP and EGFP-A2', respectively. Consequently, the recombinant peptides acquired reasonable neuron-specific binding/internalizing ability through the recruitment of RBD'. In conclusion, RBDs of BoNTs are versatile protein domains that can be used to mark neural systems and treat a range of disorders in neural systems.

Optimization of protein trans-splicing in an inducible plasmid display system for high-throughput screening and selection of soluble proteins.

Directed evolution is widely used to optimize protein folding and solubility in cells. Although the screening and selection of desired mutants is an essential step in directed evolution, it generally requires laborious optimization and/or specialized equipment. With a view toward designing a more practical procedure, we previously developed an inducible plasmid display system, in which the intein (auto-processing) and Oct-1 DNA-binding (DBD) domains were used as the protein trans-splicing domain and DNA-binding module, respectively. Specifically, the N-terminal (CfaN) and C-terminal (CfaC) domains of intein were fused to the C-terminal end of the His-tag and the N-terminal end of Oct-1 DBD to generate His6-CfaN and CfaC-Oct-1, respectively. For such a system to be viable, the efficiency of protein trans-splicing without the protein of interest (POI) should be maximized, such that the probability of occurrence is solely dependent on the solubility of the POI. To this end, we initially prevented the degradation of l-arabinose (the inducer of the PBAD promoter) by employing an Escherichia coli host strain deficient in the metabolism of l-arabinose. Given that a low expression of His6-CfaN, compared with that of CfaC-Oct-1, was found to be conducive to the generation to a soluble product of the protein trans-splicing event, we designed the expression of His6-CfaN and CfaC-Oct-1 to be inducible from the PBAD and PT7 promoters, respectively. The optimized system thus obtained enabled in vitro selection of the plasmid-protein complex with high yield. We believe that the inducible plasmid display system developed in this study would be applicable to high-throughput screening and/or selection of protein variants with enhanced solubility.

Enhancing acid tolerance of Escherichia coli via viroporin-mediated export of protons and its application for efficient whole-cell biotransformation.

Escherichia coli-based whole-cell biocatalysts are widely used for the sustainable production of value-added chemicals. However, weak acids present as substrates and/or products obstruct the growth and fermentation capability of E. coli. Here, we show that a viroporin consisting of the influenza A matrix-2 (M2) protein, is activated by low pH and has proton channel activity in E. coli. The heterologous expression of the M2 protein in E. coli resulted in a significant increase in the intracellular pH and cell viability in the presence of various weak acids with different lengths of carbon chains. In addition, the feasibility of developing a robust and efficient E. coli-based whole-cell biocatalyst via introduction of the proton-selective viroporin was explored by employing (Z)-11-(heptanolyoxy)undec-9-enoic acid (ester) and 2-fucosyllactose (2'-FL) as model products, whose production is hampered by cytosolic acidification. The engineered E. coli strains containing the proton-selective viroporin exhibited approximately 80% and 230% higher concentrations of the ester and 2'-FL, respectively, than the control strains without the M2 protein. The simple and powerful strategy developed in this study can be applied to produce other valuable chemicals whose production involves substrates and/or products that cause cytosolic acidification.

Inducible plasmid display system for high-throughput selection of proteins with improved solubility.

Soluble expression of enzymes inside the cell is a prerequisite for the successful biotransformation of valuable products. Some key enzymes involved in biotransformation processes, however, are hardly expressed in their soluble forms. Here, we propose an inducible plasmid display, which is a molecular evolution strategy coupled with a high-throughput screening and/or selection method, as a simple and powerful tool for improving the solubility of target enzymes. Specifically, the Oct-1 DNA-binding domain and intein (i.e., auto-processing domain) were employed as anchoring and protein trans-splicing motifs to develop the system, in which the probability of protein trans-splicing is dependent on the soluble property of target proteins. The applicability of inducible plasmid display was investigated using an α-1,2-fucosyltransferase (FucT2) from Helicobacter pylori, a highly insoluble and unstable enzyme in the cytoplasmic space of Escherichia coli, as a model protein. One round of the overall inducible plasmid display process, which consists of in vivo production of FucT2 mutants and in vitro screening, enabled soluble expression of FucT2 and selection of plasmids containing the corresponding genetic information. The inducible plasmid display developed in this study will contribute to the rapid and efficient screening and/or selection of soluble proteins.

Munc18-1 induces conformational changes of syntaxin-1 in multiple intermediates for SNARE assembly.

In neuronal exocytosis, SNARE assembly into a stable four-helix bundle drives membrane fusion. Previous studies have revealed that the SM protein Munc18-1 plays a critical role for precise SNARE assembly with the help of Munc13-1, but the underlying mechanism remains unclear. Here, we used single-molecule FRET assays with a nanodisc membrane reconstitution system to investigate the conformational dynamics of SNARE/Munc18-1 complexes in multiple intermediate steps towards the SNARE complex. We found that single Munc18-1 proteins induce the closed conformation of syntaxin-1 not only in the free syntaxin-1 but also in the t-SNARE (syntaxin-1/SNAP-25) complex. These results implicate that Munc18-1 may act as a gatekeeper for both binary and ternary SNARE complex formation by locking the syntaxin-1 in a cleft of Munc18-1. Furthermore, the kinetic analysis of the opening/closing transition reveals that the closed syntaxin-1 in the syntaxin-1/SNAP-25/Munc18-1 complex is less stable than that in the closed syntaxin-1/Munc18-1 complex, which is manifested by the infrequent closing transition, indicating that the conformational equilibrium of the ternary complex is biased toward the open conformation of syntaxin-1 compared with the binary complex.

Development of fluorescent Escherichia coli for a whole-cell sensor of 2'-fucosyllactose.

2'-Fucosyllactose (2'-FL), a major component of fucosylated human milk oligosaccharides, is beneficial to human health in various ways like prebiotic effect, protection from pathogens, anti-inflammatory activity and reduction of the risk of neurodegeneration. Here, a whole-cell fluorescence biosensor for 2'-FL was developed. Escherichia coli (E. coli) was engineered to catalyse the cleavage of 2'-FL into L-fucose and lactose by constitutively expressing α-L-fucosidase. Escherichia coli ∆L YA, in which lacZ is deleted and lacY is retained, was employed to disable lactose consumption. E. coli ∆L YA constitutively co-expressing α-L-fucosidase and a red fluorescence protein (RFP) exhibited increased fluorescence intensity in media containing 2'-FL. However, the presence of 50 g/L lactose reduced the RFP intensity due to lactose-induced cytotoxicity. Preadaptation of bacterial strains to fucose alleviated growth hindrance by lactose and partially recovered the fluorescence intensity. The fluorescence intensity of the cell was linearly proportional to 1-5 g/L 2'-FL. The whole-cell sensor will be versatile in developing a 2'-FL detection system.

Development of a quantitative assay for 2´-fucosyllactose via one-pot reaction with α1,2-fucosidase and l-fucose dehydrogenase.

2'-Fucosyllactose (2'-FL) is the most abundant milk oligosaccharide in human breast milk and it has several benefits for infant health. The quantification of 2'-FL in breast milk or in samples from other sources generally requires lengthy analyses. These methods cannot be used to simultaneously detect 2'-FL in numerous samples, which would be more time-efficient. In this study, two genes, namely α1,2-fucosidase from Xanthomonas manihotis and l-fucose dehydrogenase from Pseudomonas sp. no. 1143, were identified, cloned and overexpressed in E. coli. The recombinant enzymes were produced as 6 × His-tagged proteins and were purified to homogeneity using Ni2+ affinity chromatography. The purified α1,2-fucosidase and l-fucose dehydrogenase are monomers with molecular masses of 63 kDa and 36 kDa, respectively. Both enzymes have sufficiently high activities in phosphate-buffered saline (pH 7.0) at 37 °C, making it possible to develop a coupled enzyme reaction in a single buffer system for the quantitative determination of 2'-FL in a large number of samples simultaneously. This method can be used to quantify 2'-FL in infant formulas and in samples collected from different phases of the biotechnological production of this oligosaccharide. Furthermore, the method is applicable for the rapid screening of active variants during the development of microbial strains producing 2'-FL.

Search for bacterial α1,2-fucosyltransferases for whole-cell biosynthesis of 2'-fucosyllactose in recombinant Escherichia coli.

2'-Fucosyllactose (2'-FL) is the most abundant human milk oligosaccharide and is important for infant nutrition and health. Because 2'-FL has potential as a functional ingredient in advanced infant formula and as a prebiotic in various foods, a cost-effective method for 2'-FL production is desirable. α1,2-Fucosyltransferase (α1,2-FT) is one of the key enzymes enabling the microbial biosynthesis of this complex sugar. However, the α1,2-FTs reported so far for the whole-cell biosynthesis of 2'-FL originate from pathogens, posing a potential hurdle for approval as a food production method depending on countries. In this study, 10 α1,2-FT genes from bacteria of biosafety level one were identified, and the main features of the deduced amino acid sequences were characterized. Four codon-optimized α1,2-FT genes were synthesized and introduced into Escherichia coli ΔL M15 strain containing the plasmid pBCGW encoding guanosine 5'-diphosphate-l-fucose biosynthetic enzymes. Among the four genes, 2'-FL was produced only by the α1,2-FT from Thermosynechococcus elongatus (Te2FT). Bifidobacterium thermacidophilum α1,2-FT (Bt2FT) showed high expression but was not active in E. coli ΔL M15. The other two α1,2-FTs were not expressed to a detectable level. During batch flask fermentation of Te2FT-expressing E. coli ΔL M15 cells, 0.49 g/L 2'-FL was obtained after 72 h of induction. This is comparable to the values previously reported for α1,2-FTs from Helicobacter pylori and Bacteroides fragilis.

Endocytosing Escherichia coli as a Whole-Cell Biocatalyst of Fatty Acids.

Whole cell biocatalysts can be used to convert fatty acids into various value-added products. However, fatty acid transport across cellular membranes into the cytosol of microbial cells limits substrate availability and impairs membrane integrity, which in turn decreases cell viability and bioconversion activity. Because these problems are associated with the mechanism of fatty acid transport through membranes, a whole-cell biocatalyst that can form caveolae-like structures was generated to promote substrate endocytosis. Caveolin-1 ( CAV1) expression in Escherichia coli increased both the fatty acid transport rate and intracellular fatty acid concentrations via endocytosis of the supplemented substrate. Furthermore, fatty-acid endocytosis alleviated substrate cytotoxicity in E. coli. These traits attributed to bacterial endocytosis resulted in dramatically elevated biotransformation efficiencies in fed-batch and cell-recycle reaction systems when caveolae-forming E. coli was used for the bioconversion of ricinoleic acid (12-hydroxyoctadec-9-enoic acid) to ( Z)-11-(heptanoyloxy) undec-9-enoic acid. We propose that CAV1-mediated endocytosing E. coli represents a versatile tool for the biotransformation of hydrophobic substrates.

Plasmid Display for Stabilization of Enzymes Inside the Cell to Improve Whole-Cell Biotransformation Efficiency.

Recombinant whole-cell biocatalysts are widely used for biotransformation of valuable products. However, some key enzymes involved in biotransformation processes are unstable and cannot be easily expressed in the functional form. In this study, we describe a versatile platform for enzyme stabilization inside the cell: Intracellularly Immobilized Enzyme System (IIES). A 1,2-fucosyltransferase from Pedobactor saltans (PsFL) and a 1,3-fucosyltransferase from Helicobacter pylori (HpFL), chosen as model proteins, were fused with Oct-1 DNA-binding domain, which mediated the formation of a plasmid-protein complex. Oct-1 fusion enabled both soluble and stable expression of recombinant proteins in the cytoplasm because the fusion proteins were stabilized on the plasmid like immobilized enzymes bound to solid surface. As a result, Oct-1-fusion proteins exhibited significantly greater product titer and yield than non-fusion proteins. Use of fusion proteins PsFL-Oct-1 with C-terminal Oct-1 and Oct-1-PsFL with N-terminal Oct-1 resulted in ~3- and ~2-fold higher 2'-fucosyllactose titers, respectively, than with the use of PsFL alone. When Oct-1 was fused to HpFL, which requires dimerization through heptad repeats, almost two times more 3-fucosyllactose was produced. Fucosyllactose has been used as a food additive because it has various beneficial effects on human health. We anticipate that IIES using Oct-1 fusion protein developed in this study can be applied to stabilize other unstable enzymes.

A Simple Enzymatic Method for Quantitation of 2'-Fucosyllactose.

2'-Fucosyllactose (2'-FL) is one of the most important human milk oligosaccharides and has several health benefits for infants. The levels of 2'-FL in breast milk or samples from other sources can bequantified by high-performance liquid chromatography. However, this method cannot be used for simultaneous detection of the target compound in numerous samples. Here, we developed a simple method for quantifying 2'-FL in a microplate format. The method involves two steps: (1) release of L-fucose from 2'-FL by α-(1-2,3,4,6)-L-fucosidase and (2) measurement of NADPH formed during the oxidation of L-fucose by L-fucose dehydrogenase. This method enables measurement of up to 5 g/l 2'-FL in 50 min using a 96-well microplate. The efficiency and simplicity of the proposed method make it suitable for the analyses of a large number of samples simultaneously.

Engineering of α-1,3-fucosyltransferases for production of 3-fucosyllactose in Escherichia coli.

Fucosyllactoses (FLs), present in human breast milk, have been reported to benefit human health immensely. Especially, 3-fucosyllactose (3-FL) has numerous benefits associated with a healthy gut ecosystem. Metabolic engineering of microorganisms is thought to be currently the only option to provide an economically feasible route for large-scale production of 3-FL. However, engineering principles for α-1,3-fucosyltransferases (1,3-FTs) are not well-known, resulting in the lower productivity of 3-FL than that of 2'-fucosyllactose (2'-FL), although both 2'-FL and 3-FL follow a common pathway to produce GDP-L-fucose. The C-terminus of 1,3-FTs is composed of heptad repeats, responsible for dimerization of the enzymes, and a peripheral membrane anchoring region. It has long been thought that truncation of most heptad repeats, retaining just 1 or 2, helps the soluble expression of 1,3-FTs. However, whether the introduction of truncated version of 1,3-FTs enhances the production of 3-FL in a metabolically engineered strain, is yet to be tested. In this study, the effect of these structural components on the production of 3-FL in Escherichia coli was evaluated through systematic truncation and elongation of the C-terminal regions of three 1,3-FTs from Helicobacter pylori. Although these three 1,3-FTs contained heptad repeats and membrane-anchoring regions of varying lengths, they commonly exhibited an optimal performance when the number of heptad repeats was increased, and membrane-binding region was removed. The production of 3-FL could be increased 10-20-fold through this simple strategy.

Green fluorescence protein-based content-mixing assay of SNARE-driven membrane fusion.

Soluble N-ethylmaleimide-sensitive factor attachment protein receptor (SNARE) proteins mediate intracellular membrane fusion by forming a ternary SNARE complex. A minimalist approach utilizing proteoliposomes with reconstituted SNARE proteins yielded a wealth of information pinpointing the molecular mechanism of SNARE-mediated fusion and its regulation by accessory proteins. Two important attributes of a membrane fusion are lipid-mixing and the formation of an aqueous passage between apposing membranes. These two attributes are typically observed by using various fluorescent dyes. Currently available in vitro assay systems for observing fusion pore opening have several weaknesses such as cargo-bleeding, incomplete removal of unencapsulated dyes, and inadequate information regarding the size of the fusion pore, limiting measurements of the final stage of membrane fusion. In the present study, we used a biotinylated green fluorescence protein and streptavidin conjugated with Dylight 594 (DyStrp) as a Föster resonance energy transfer (FRET) donor and acceptor, respectively. This FRET pair encapsulated in each v-vesicle containing synaptobrevin and t-vesicle containing a binary acceptor complex of syntaxin 1a and synaptosomal-associated protein 25 revealed the opening of a large fusion pore of more than 5 nm, without the unwanted signals from unencapsulated dyes or leakage. This system enabled determination of the stoichiometry of the merging vesicles because the FRET efficiency of the FRET pair depended on the molar ratio between dyes. Here, we report a robust and informative assay for SNARE-mediated fusion pore opening.