Increasing the melting temperature of VHH with the in silico free energy score.

VHH, the antigen-binding fragment of a heavy chain-only antibody, is a useful component of antibody-based therapeutics. Thermal stability, represented by the melting temperature (Tm), is one of the key factors affecting the developability of antibody-based therapeutics. In this study, we examined whether the in silico free energy score dStability can be used to design mutants with improved Tm compared to the anti-lysozyme VHH, D3-L11. After verifying that exhaustive mutagenesis was inefficient for improving Tm, we performed a two-round rational approach that combined dStability calculations with a small number of experiments. This method improved the Tm by more than 5 °C in several single mutants including A79I. It reduced the affinity for the antigen by less than 1.6-fold. We speculate that stabilization of A79I required exquisite compatibility among neighboring residues to fill in the internal cavity in the protein. Given that we identified only one mutation that could simultaneously improve Tm and almost maintain affinity, we concluded that achieving both is extremely difficult, even with single mutations that are not located in the paratope. Therefore, we recommend using a variety of approaches when trying to achieve such a feat. Our method will be a useful complementary approach to other existing methods.

Exploring designability of electrostatic complementarity at an antigen-antibody interface directed by mutagenesis, biophysical analysis, and molecular dynamics simulations.

Antibodies protect organisms from a huge variety of foreign antigens. Antibody diversity originates from both genetic and structural levels. Antigen recognition relies on complementarity between antigen-antibody interfaces. Recent methodological advances in structural biology and the accompanying rapid increase of the number of crystal structures of proteins have enabled atomic-level manipulation of protein structures to effect alterations in function. In this study, we explored the designability of electrostatic complementarity at an antigen-antibody interface on the basis of a crystal structure of the complex. We designed several variants with altered charged residues at the interface and characterized the designed variants by surface plasmon resonance, circular dichroism, differential scanning calorimetry, and molecular dynamics simulations. Both successes and failures of the structure-based design are discussed. The variants that compensate electrostatic interactions can restore the interface complementarity, enabling the cognate antigen-antibody binding. Retrospectively, we also show that these mutational effects could be predicted by the simulations. Our study demonstrates the importance of charged residues on the physical properties of this antigen-antibody interaction and suggests that computational approaches can facilitate design of antibodies that recognize a weakly immunogenic antigen.

Antibody titres and boosting after natural malaria infection in BK-SE36 vaccine responders during a follow-up study in Uganda.

The malaria vaccine BK-SE36 is a recombinant protein (SE36) based on the Honduras 1 serine repeat antigen-5 of Plasmodium falciparum, adsorbed to aluminium hydroxide gel. The phase Ib trial in Uganda demonstrated the safety and immunogenicity of BK-SE36. Ancillary analysis in the follow-up study of 6-20 year-old volunteers suggest significant differences in time to first episodes of clinical malaria in vaccinees compared to placebo/control group. Here, we aimed to get further insights into the association of anti-SE36 antibody titres and natural P. falciparum infection. Children who received BK-SE36 and whose antibody titres against SE36 increased by ≥1.92-fold after vaccination were categorised as responders. Most responders did not have or only had a single episode of natural P. falciparum infection. Notably, responders who did not experience infection had relatively high anti-SE36 antibody titres post-second vaccination compared to those who were infected. The anti-SE36 antibody titres of the responders who experienced malaria were boosted after infection and they had lower risk of reinfection. These findings show that anti-SE36 antibody titres induced by BK-SE36 vaccination offered protection against malaria. The vaccine is now being evaluated in a phase Ib trial in children less than 5 years old.

BACTERIAL IDENTIFICATION USING SSRA ENCODING TRANSFER-MESSENGER RNA.

Abstract. Ribosomal DNA (rDNA) sequences are widely used for phylogenetic and bacterial identification. However, rDNA of different species often reveals similar or identical same sequences. This study employed the bacterial stable small RNA (ssrA) gene encoding transfer-messenger RNA (tmRNA) as a tool for identification of Staphylococcus aureus, Enterococcus spp, Pseudomonas spp and Enterobacteriaceae from clinical isolates as representative groups using PCR and species specific primers. The method correctly identified 11 standard strains and 99 clinical isolates. Quantitative PCR revealed a limit of detection of 10(-5) µg of DNA for S. aureus and Enterococcus spp, and 10(-6) µg for Pseudomonas spp and Enterobacteriaceae. Further studies with a greater number of bacteria especially from clinical samples will need to be undertaken before this bacterial molecular marker can be applied in a clinical setting.

Antibody informatics for drug discovery.

More and more antibody therapeutics are being approved every year, mainly due to their high efficacy and antigen selectivity. However, it is still difficult to identify the antigen, and thereby the function, of an antibody if no other information is available. There are obstacles inherent to the antibody science in every project in antibody drug discovery. Recent experimental technologies allow for the rapid generation of large-scale data on antibody sequences, affinity, potency, structures, and biological functions; this should accelerate drug discovery research. Therefore, a robust bioinformatic infrastructure for these large data sets has become necessary. In this article, we first identify and discuss the typical obstacles faced during the antibody drug discovery process. We then summarize the current status of three sub-fields of antibody informatics as follows: (i) recent progress in technologies for antibody rational design using computational approaches to affinity and stability improvement, as well as ab-initio and homology-based antibody modeling; (ii) resources for antibody sequences, structures, and immune epitopes and open drug discovery resources for development of antibody drugs; and (iii) antibody numbering and IMGT. Here, we review "antibody informatics," which may integrate the above three fields so that bridging the gaps between industrial needs and academic solutions can be accelerated. This article is part of a Special Issue entitled: Recent advances in molecular engineering of antibody.

Kotai Antibody Builder: automated high-resolution structural modeling of antibodies.

MOTIVATION: Kotai Antibody Builder is a Web service for tertiary structural modeling of antibody variable regions. It consists of three main steps: hybrid template selection by sequence alignment and canonical rules, 3D rendering of alignments and CDR-H3 loop modeling. For the last step, in addition to rule-based heuristics used to build the initial model, a refinement option is available that uses fragment assembly followed by knowledge-based scoring. Using targets from the Second Antibody Modeling Assessment, we demonstrate that Kotai Antibody Builder generates models with an overall accuracy equal to that of the best-performing semi-automated predictors using expert knowledge. AVAILABILITY AND IMPLEMENTATION: Kotai Antibody Builder is available at http://kotaiab.org CONTACT: standley@ifrec.osaka-u.ac.jp.

Hematological and biochemical data obtained in rural northern Uganda.

Reference intervals for common hematological and clinical chemistry parameters constitute an important basis for health care. Moreover, with increasing priority in drug and vaccine development for infectious diseases in Africa, the first priority is the safety evaluation and tolerability of the candidate interventions in healthy populations. To accurately assess health status and address adverse events, clinical reference intervals in the target population are necessary. We report on hematological and biochemical indices from healthy volunteers who participated in a clinical trial in Lira, northern Uganda. Median and nonparametric 95% percentiles on five hematology and 15 biochemistry analytes are shown. Although most hematological analytes conformed to reported reference intervals and trends in Africa, literature review from different African countries highlight the need for a region-specific children reference interval that can be appropriate for the population.

High-resolution modeling of antibody structures by a combination of bioinformatics, expert knowledge, and molecular simulations.

In the second antibody modeling assessment, we used a semiautomated template-based structure modeling approach for 11 blinded antibody variable region (Fv) targets. The structural modeling method involved several steps, including template selection for framework and canonical structures of complementary determining regions (CDRs), homology modeling, energy minimization, and expert inspection. The submitted models for Fv modeling in Stage 1 had the lowest average backbone root mean square deviation (RMSD) (1.06 Å). Comparison to crystal structures showed the most accurate Fv models were generated for 4 out of 11 targets. We found that the successful modeling in Stage 1 mainly was due to expert-guided template selection for CDRs, especially for CDR-H3, based on our previously proposed empirical method (H3-rules) and the use of position specific scoring matrix-based scoring. Loop refinement using fragment assembly and multicanonical molecular dynamics (McMD) was applied to CDR-H3 loop modeling in Stage 2. Fragment assembly and McMD produced putative structural ensembles with low free energy values that were scored based on the OSCAR all-atom force field and conformation density in principal component analysis space, respectively, as well as the degree of consensus between the two sampling methods. The quality of 8 out of 10 targets improved as compared with Stage 1. For 4 out of 10 Stage-2 targets, our method generated top-scoring models with RMSD values of less than 1 Å. In this article, we discuss the strengths and weaknesses of our approach as well as possible directions for improvement to generate better predictions in the future.

Affinity improvement of a therapeutic antibody by structure-based computational design: generation of electrostatic interactions in the transition state stabilizes the antibody-antigen complex.

The optimization of antibodies is a desirable goal towards the development of better therapeutic strategies. The antibody 11K2 was previously developed as a therapeutic tool for inflammatory diseases, and displays very high affinity (4.6 pM) for its antigen the chemokine MCP-1 (monocyte chemo-attractant protein-1). We have employed a virtual library of mutations of 11K2 to identify antibody variants of potentially higher affinity, and to establish benchmarks in the engineering of a mature therapeutic antibody. The most promising candidates identified in the virtual screening were examined by surface plasmon resonance to validate the computational predictions, and to characterize their binding affinity and key thermodynamic properties in detail. Only mutations in the light-chain of the antibody are effective at enhancing its affinity for the antigen in vitro, suggesting that the interaction surface of the heavy-chain (dominated by the hot-spot residue Phe101) is not amenable to optimization. The single-mutation with the highest affinity is L-N31R (4.6-fold higher affinity than wild-type antibody). Importantly, all the single-mutations showing increase affinity incorporate a charged residue (Arg, Asp, or Glu). The characterization of the relevant thermodynamic parameters clarifies the energetic mechanism. Essentially, the formation of new electrostatic interactions early in the binding reaction coordinate (transition state or earlier) benefits the durability of the antibody-antigen complex. The combination of in silico calculations and thermodynamic analysis is an effective strategy to improve the affinity of a matured therapeutic antibody.

Modulation of O-antigen chain length by the wzz gene in Escherichia coli O157 influences its sensitivities to serum complement.

Escherichia coli O157 strains belonging to a distinct lineage and expressing different O-antigen (Oag) lengths were isolated. Although the function of wzz in E. coli has not been adequately investigated, this gene is known to be associated with regulation of Oag length. Using E. coli O157:H7 ATCC43888 (wild-type), several wzz mutants of E. coli O157, including a wzz deletion mutant, were generated and the relationship between the length of Oag modulated by the wzz gene and sensitivities to serum complement investigated. SDS-PAGE, immunoblot analyses and sensitivity tests to human serum complement were performed on these strains. The lengths of the O157-antigen could be modulated by the wzz gene mutations and were classified into long, intermediate and short groups. The short chain mutant was more serum sensitive than the wild-type strain and the other wzz mutants (P < 0.001). In conclusion, Oag chain length modulated by the wzz gene in E. coli O157 influences its sensitivities to serum complement. The present findings suggest that E. coli O157 strains with intermediate or long length Oag chains might show greater resistance to serum complement than those with short chains.

Phase 1b randomized trial and follow-up study in Uganda of the blood-stage malaria vaccine candidate BK-SE36.

BACKGROUND: Up to now a malaria vaccine remains elusive. The Plasmodium falciparum serine repeat antigen-5 formulated with aluminum hydroxyl gel (BK-SE36) is a blood-stage malaria vaccine candidate that has undergone phase 1a trial in malaria-naive Japanese adults. We have now assessed the safety and immunogenicity of BK-SE36 in a malaria endemic area in Northern Uganda. METHODS: We performed a two-stage, randomized, single-blinded, placebo-controlled phase 1b trial (Current Controlled trials ISRCTN71619711). A computer-generated sequence randomized healthy subjects for 2 subcutaneous injections at 21-day intervals in Stage1 (21-40 year-olds) to 1-mL BK-SE36 (BKSE1.0) (n = 36) or saline (n = 20) and in Stage2 (6-20 year-olds) to BKSE1.0 (n = 33), 0.5-mL BK-SE36 (BKSE0.5) (n = 33), or saline (n = 18). Subjects and laboratory personnel were blinded. Safety and antibody responses 21-days post-second vaccination (Day42) were assessed. Post-trial, to compare the risk of malaria episodes 130-365 days post-second vaccination, Stage2 subjects were age-matched to 50 control individuals. RESULTS: Nearly all subjects who received BK-SE36 had induration (Stage1, n = 33, 92%; Stage2, n = 63, 96%) as a local adverse event. No serious adverse event related to BK-SE36 was reported. Pre-existing anti-SE36 antibody titers negatively correlated with vaccination-induced antibody response. At Day42, change in antibody titers was significant for seronegative adults (1.95-fold higher than baseline [95% CI, 1.56-2.43], p = 0.004) and 6-10 year-olds (5.71-fold [95% CI, 2.38-13.72], p = 0.002) vaccinated with BKSE1.0. Immunogenicity response to BKSE0.5 was low and not significant (1.55-fold [95% CI, 1.24-1.94], p = 0.75). In the ancillary analysis, cumulative incidence of first malaria episodes with ≥5000 parasites/µL was 7 cases/33 subjects in BKSE1.0 and 10 cases/33 subjects in BKSE0.5 vs. 29 cases/66 subjects in the control group. Risk ratio for BKSE1.0 was 0.48 (95% CI, 0.24-0.98; p = 0.04). CONCLUSION: BK-SE36 is safe and immunogenic. The promising potential of BK-SE36, observed in the follow-up study, warrants a double-blind phase 1/2b trial in children under 5 years. TRIAL REGISTRATION: Controlled-Trials.com ISRCTN71619711.

Association of naturally acquired IgG antibodies against Plasmodium falciparum serine repeat antigen-5 with reduced placental parasitemia and normal birth weight in pregnant Ugandan women: a pilot study.

Plasmodium falciparum infection during pregnancy contributes substantially to malaria burden in both mothers and offspring. Analysis of naturally acquired immune responses that confer protection against parasitemia and clinical disease is important to guide vaccine evaluation as well as identify immune correlates. Unfortunately, few studies have addressed the relationship between immune responses to malaria vaccine candidate antigens and protection against adverse effects on pregnant women and newborn birth weight. This study examines the relationship of maternal antibody responses to serine repeat antigen-5 (SE36) and merozoite surface protein-1 (MSP119 and MSP142) with placental parasitemia and birth weight. In a peri-urban setting in Uganda, pregnant women without placental parasites have high median ODs for antibodies against SE36 (P<0.001). Naturally acquired anti-SE36 IgG was most prevalent in women without placental parasitemia (P<0.001). Furthermore, pregnant women with significantly high levels of anti-SE36 IgG delivered babies with normal birth weights (P<0.001). That antibody to SE36 was associated with both a reduced risk of placental parasitemia and resulting normal birth weight in newborns suggests some protective role. In contrast, although antibody to MSP142 was also associated with reduced placental parasitemia and immune responses to both MSP119 and MSP142 may be of importance, there was no association between anti-MSP119 antibodies and infant birth weight outcomes. This study highlights the need for conducting further studies to investigate the association of antibodies against SE36 and outcomes of malaria infection in pregnant women.

Computational design, construction, and characterization of a set of specificity determining residues in protein-protein interactions.

Proteins interact with different partners to perform different functions and it is important to elucidate the determinants of partner specificity in protein complex formation. Although methods for detecting specificity determining positions have been developed previously, direct experimental evidence for these amino acid residues is scarce, and the lack of information has prevented further computational studies. In this article, we constructed a dataset that is likely to exhibit specificity in protein complex formation, based on available crystal structures and several intuitive ideas about interaction profiles and functional subclasses. We then defined a "structure-based specificity determining position (sbSDP)" as a set of equivalent residues in a protein family showing a large variation in their interaction energy with different partners. We investigated sequence and structural features of sbSDPs and demonstrated that their amino acid propensities significantly differed from those of other interacting residues and that the importance of many of these residues for determining specificity had been verified experimentally.

Computer-aided antibody design.

Recent clinical trials using antibodies with low toxicity and high efficiency have raised expectations for the development of next-generation protein therapeutics. However, the process of obtaining therapeutic antibodies remains time consuming and empirical. This review summarizes recent progresses in the field of computer-aided antibody development mainly focusing on antibody modeling, which is divided essentially into two parts: (i) modeling the antigen-binding site, also called the complementarity determining regions (CDRs), and (ii) predicting the relative orientations of the variable heavy (V(H)) and light (V(L)) chains. Among the six CDR loops, the greatest challenge is predicting the conformation of CDR-H3, which is the most important in antigen recognition. Further computational methods could be used in drug development based on crystal structures or homology models, including antibody-antigen dockings and energy calculations with approximate potential functions. These methods should guide experimental studies to improve the affinities and physicochemical properties of antibodies. Finally, several successful examples of in silico structure-based antibody designs are reviewed. We also briefly review structure-based antigen or immunogen design, with application to rational vaccine development.

Wide distribution of O157-antigen biosynthesis gene clusters in Escherichia coli.

Most Escherichia coli O157-serogroup strains are classified as enterohemorrhagic E. coli (EHEC), which is known as an important food-borne pathogen for humans. They usually produce Shiga toxin (Stx) 1 and/or Stx2, and express H7-flagella antigen (or nonmotile). However, O157 strains that do not produce Stxs and express H antigens different from H7 are sometimes isolated from clinical and other sources. Multilocus sequence analysis revealed that these 21 O157:non-H7 strains tested in this study belong to multiple evolutionary lineages different from that of EHEC O157:H7 strains, suggesting a wide distribution of the gene set encoding the O157-antigen biosynthesis in multiple lineages. To gain insight into the gene organization and the sequence similarity of the O157-antigen biosynthesis gene clusters, we conducted genomic comparisons of the chromosomal regions (about 59 kb in each strain) covering the O-antigen gene cluster and its flanking regions between six O157:H7/non-H7 strains. Gene organization of the O157-antigen gene cluster was identical among O157:H7/non-H7 strains, but was divided into two distinct types at the nucleotide sequence level. Interestingly, distribution of the two types did not clearly follow the evolutionary lineages of the strains, suggesting that horizontal gene transfer of both types of O157-antigen gene clusters has occurred independently among E. coli strains. Additionally, detailed sequence comparison revealed that some positions of the repetitive extragenic palindromic (REP) sequences in the regions flanking the O-antigen gene clusters were coincident with possible recombination points. From these results, we conclude that the horizontal transfer of the O157-antigen gene clusters induced the emergence of multiple O157 lineages within E. coli and speculate that REP sequences may involve one of the driving forces for exchange and evolution of O-antigen loci.

Quantitative evaluation of protein conformation in pharmaceuticals using cross-linking reactions coupled with LC-MS/MS analysis.

The need for a simple and high-throughput method for identifying the tertiary structure of protein pharmaceuticals has increased. In this study, a simple method for mapping the protein fold is proposed for use as a complementary quality test. This method is based on cross-linking a protein using a [bis(sulfosuccinimidyl)suberate (BS(3))], followed by peptide mapping by LC-MS. Consensus interferon (CIFN) was used as the model protein. The tryptic map obtained via liquid chromatography tandem mass spectroscopy (LC-MS/MS) and the mass mapping obtained via matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy were used to identify cross-linked peptides. While LC-MS/MS analyses found that BS(3) formed cross-links in the loop region of the protein, which was regarded as the biologically active site, sodium dodecyl-sulfate polyacrylamide gel electrophoresis demonstrated that cross-linking occurred within a protein molecule, but not between protein molecules. The occurrence of cross-links at the active site depends greatly on the conformation of the protein, which is determined by the denaturing conditions. Quantitative evaluation of the tertiary structure of CIFN was thus possible by monitoring the amounts of cross-linked peptides generated. Assuming that background information is available at the development stage, this method may be applicable to process development as a complementary test for quality control.

Evidences of protection against blood-stage infection of Plasmodium falciparum by the novel protein vaccine SE36.

An effective malaria vaccine is a public health priority. Proteins expressed during the blood-stage of the parasite life cycle have been proposed as good vaccine candidates. No such blood-stage vaccine, however, is available against Plasmodium falciparum, the deadliest Plasmodium species. We show here that P. falciparum serine repeat antigen 5 (SERA5) is a potential vaccine immunogen. We have constructed a new recombinant molecule of SERA5, namely SE36, based on previously reported SE47' molecule by removing the serine repeats. Epidemiological study in the holo-endemic population of Solomon Islands shows highly significant correlation of sero-conversion and malaria protective immunity against this antigen. Animal experiments using non-human primates, and a human phase 1a clinical trial assessed SE36 vaccine immunogenicity. Vaccination of squirrel monkeys with SE36 protein and aluminum hydroxyl gel (SE36/AHG) conferred protection against high parasitemia and boosted serum anti-SE36 IgG after P. falciparum parasite challenge. SE36/AHG was highly immunogenic in chimpanzees, where serum anti-SE36 IgG titers last more than one year. Phase 1a clinical trial (current controlled trials, ISRCTN78679862) demonstrated the safety and immunogenicity of SE36/AHG with 30 healthy adults and 10 placebo controls. Three subcutaneous administrations of 50 and 100microg dose of SE36/AHG were well-tolerated, with no severe adverse events; and resulted in 100% sero-conversion in both dose arms. The current research results for SE36/AHG provide initial clinical validation for future trials and suggest clues/strategies for further vaccine development.

Use of amino acid composition to predict epitope residues of individual antibodies.

We identified specific amino acid propensities at the interfaces of antigen-antibody interactions in non-redundant qualified antigen-antibody complex structures from Protein Data Bank. Propensities were expressed by the frequency of each of the 20 x 20 standard amino acid pairs that appeared at the interfaces of the complexes and were named the antibody-specific epitope propensity (ASEP) index. Using this index, we developed a novel method of predicting epitope residues for individual antibodies by narrowing down candidate epitope residues which was predicted by the conventional method. The 74 benchmarked antigens were used in ASEP prediction. The efficiency of this method was assessed using the leave-one-out approach. On elimination of residues with ASEP indices in the lowest 10% of all measured, true positives were enriched for 49 antigens. On subsequent elimination of residues with ASEP indices in the lowest 50%, true positives were enriched for 40 of the 74 antigens assessed. The ASEP index is the first benchmark proposed to predict epitope residues for an individual antibody. Used in combination with mutation experiments, this index has the potential to markedly increase the success ratio of epitope analysis.

Systematic classification of CDR-L3 in antibodies: implications of the light chain subtypes and the VL-VH interface.

Antibody modeling is widely used for the analysis of antibody-antigen interactions and for the design of potent antibody drugs. The antibody combining site is composed of six complementarity determining regions (CDRs). The CDRs, except for CDR-H3, which is the most diverse CDR, form limited numbers of canonical structures, which can be identified from the amino acid sequences. A method to classify the CDR-H3 structure from its amino acid sequence was previously proposed. However, since those CDR structures were classified, many more antibody crystal structures have been determined. We performed systematic analyses of the CDR-L3 structures and found novel canonical structures, and we also classified a previously identified canonical structure into two subtypes. In addition, two differently defined canonical structures in the kappa and lambda subtypes were classified into the same canonical structure. We also identified a key residue in CDR-L3, which determines the conformation of CDR-H3. Several analyses of CDR-L3 loops longer than nine residues were performed. These new findings should be useful for structural modeling and are eventually expected to accelerate the design of antibody drugs.

Chemocavity: specific concavity in protein reserved for the binding of biologically functional small molecules.

The idea that there should be a specific site on a protein for a particular functional small molecule is widespread. It is, however, usually not so easy to understand what characteristics of the site determine the binding ability of the functional small molecule. We have focused on the concurrence rate of the 20 standard amino acids at such binding sites. In order to correlate the concurrence rate and the specific binding site, we have analyzed high-quality X-ray structures of complexes between proteins and small molecules. A novel index characterizing the binding site based on the concurrency rate has been introduced. Using this index we have identified that there is a specific concavity designated as a chemocavity where a specific group of small molecules, i.e., canonical molecular group, is highly inclined to be bound. This study has demonstrated that a chemocavity is reserved for a specific canonical molecular group, and the prevalent idea has been confirmed.