RESUMEN
A novel coronavirus (severe acute respiratory syndrome coronavirus 2, SARS-CoV-2) emerged in late 2019, causing an outbreak of pneumonia [coronavirus disease 2019 (COVID-19)] in Wuhan, China, which then rapidly spread globally. Although the use of ready-made reaction mixes can enable more rapid PCR-based diagnosis of COVID-19, the need to transport and store these mixes at low temperatures presents challenges to already overburdened logistics networks. Here, we present an optimized freeze-drying procedure that allows SARS-CoV-2 PCR mixes to be transported and stored at ambient temperatures, without loss of activity. Additive-supplemented PCR mixes were freeze-dried. The residual moisture of the freeze-dried PCR mixes was measured by Karl-Fischer titration. We found that freeze-dried PCR mixes with [~]1.2% residual moisture are optimal for storage, transport, and reconstitution. The sensitivity, specificity, and repeatability of the freeze-dried reagents were similar to those of freshly prepared, wet reagents. The freeze-dried mixes retained activity at room temperature (18[~]25{degrees}C) for 28 days, and for 14 and 10 days when stored at 37{degrees}C and 56{degrees}C, respectively. The uptake of this approach will ease logistical challenges faced by transport networks and make more cold storage space available at diagnosis and hospital laboratories. This method can also be applied to the generation of freeze-dried PCR mixes for the detection of other pathogens.
RESUMEN
BackgroundTimely diagnosis of SARS-CoV-2 infection is the prerequisite for treatment and preventive quarantine. The serology characteristics and complement diagnosis value of antibody test to RNA test needs to be demonstrated. MethodA patient cohort study was conducted at the first affiliated hospital of Zhejiang University, China. Serial plasma of COVID-19 patients and were collected and total antibody (Ab), IgM and IgG antibody against SARS-CoV-2 were detected. The antibody dynamics during the infection were described. ResultsThe seroconversion rate for Ab, IgM and IgG in COVID-19 patients was 98.8% (79/80), 93.8% (75/80) and 93.8% (75/80), respectively. The first detectible serology marker is total antibody and followed by IgM and IgG, with a median seroconversion time of 15, 18 and 20 day post exposure (d.p.e) or 9, 10 and 12 days post onset, separately. The antibody levels increased rapidly since 6 d.p.o and accompanied with the decline of viral load. For patients in the early stage of illness (0-7d.p.o),Ab showed the highest sensitivity (64.1%) compared to the IgM and IgG (33.3% for both, p<0.001). The sensitivities of Ab, IgM and IgG detection increased to 100%, 96.7% and 93.3% two weeks later, respectively. ConclusionsTypical acute antibody response is induced during the SARS-CoV-2 infection. The serology testing provides important complementation to RNA test for pathogenic specific diagnosis and helpful information to evaluate the adapted immunity status of patient. It should be strongly recommended to apply well-validated antibody tests in the clinical management and public health practice to improve the control of COVID-19 infection. Take-Home MessageAntibody responses are induced after SARS-CoV-2 infection and complement diagnosis value of antibody test to RNA test was observed. Antibody tests are critical tools in clinical management and control of SARS-CoV-2 infection and COVID-19.
RESUMEN
Point-of-care testing (POCT) is a test method performed on the sampling site or patient bedside. Accurate results can be achieved rapidly by the application of portable analytical instruments and compatible reagents. It has been widely used in the field of in vitro diagnosis (IVD). Paper-based microfluidics technology has great potential in developing POCT due to its advantages in low cost, simple operation, rapid detection, portable equipment, and unrestricted application conditions. In recent years, the development of paper-based microfluidic technology and its integration with various new technologies and methods have promoted the substantial development of POCT technology and methods. The classification and characteristic of the paper are summarized in this review. Paper-based microfluidic sample pretreatment methods, the flow control in the process of reaction and the signal detecting and analyzing methods for the testing results are introduced. The research progress of various kinds of microfluidic paper-based analytical devices (μPADs) toward POCT in recent years is reviewed. Finally, remaining problems and the future prospects in POCT application of paper-based microfluidics are discussed.
Asunto(s)
Humanos , Pruebas Diagnósticas de Rutina , Métodos , Técnicas Analíticas Microfluídicas , Papel , Pruebas en el Punto de AtenciónRESUMEN
The convective polymerase chain reaction (CCPCR) uses the principle of thermal convection to allow the reagent to flow in the test tube and achieve the purpose of amplification by the temperature difference between the upper and lower portions of the test tube. In order to detect the amplification effect in real time, we added a fluorophore to the reagent system to reflect the amplification in real time through the intensity of fluorescence. The experimental results show that the fluorescence curve conforms to the S-type trend of the amplification curve, but there is a certain jitter condition due to the instability of the thermal convection, which is not conducive to the calculation of the cycle threshold (CT value). In order to solve this problem, this paper uses the dynamic method, using the double S-type function model to fit the curve, so that the fluorescence curve is smooth and the initial concentration of the nucleic acid can be deduced better to achieve the quantitative purpose based on the curve. At the same time, the PSO+ algorithm is used to solve the double s-type function parameters, that is, particle swarm optimization (PSO) algorithm combined with Levenberg-Marquardt, Newton-CG and other algorithms for curve fitting. The proposed method effectively overcoms PSO randomness and the shortcoming of traditional algorithms such as Levenberg-Marquardt and Newton-CG which are easy to fall into the local optimal solution. The of the data fitting result can reach 0.999 8. This study is of guiding significance for the future quantitative detection of real-time fluorescent heat convection amplification.
Asunto(s)
Algoritmos , Fluorescencia , Colorantes Fluorescentes , Reacción en Cadena de la PolimerasaRESUMEN
OBJECTIVE:To observe the clinical efficacy and ADR of ultrasound debridement combined with Huangma tinc-ture in the treatment of diabetic foot ulcer. METHODS:90 diabetic foot ulcer patients were randomly divided into combination treatment group(ultrasound debridement combined with Huangma tincture wet compress),Huangma tincture group(Huangma tinc-ture wet compress) and control group (vaseline) with 30 cases in each group. 3 months after treatment,Ulcer healing rate,cure time,effective time,recovery time,cure rate and ADR were observed in each group. RESULTS:The ulcer healing rate of combi-nation treatment group was significantly higher than that of Huangma tincture group and control group,with statistical significance (P<0.05);there was statistical significance between Huangma tincture group and control group(P<0.05). Mean cure time,effec-tive time and recovery time of combination treatment group were all significantly lower than Huangma tincture group and control group,with statistical significance(P<0.05);there was statistical significance between Huangma tincture group and control group (P<0.05). Cure rate of combination treatment group was higher than that of Huangma tincture group and control group,with statis-tical significance (P<0.05);there was statistical significance between Huangma tincture group and control group (P<0.05). No ADR was found in combination treatment group and Huangma tincture group. CONCLUSIONS:The ultrasound debridement com-bined with Huangma tincture in the treatment of diabetic foot ulcer improve healing rate and shorten healing time significantly with-out obvious ADR. It has good clinical efficacy.