Estimating population-level of alcohol, tobacco and morphine use in a small Russian region using wastewater-based epidemiology.

INTRODUCTION: Alcohol, tobacco and illicit drug use combined are the largest modifiable health risk factors. Wastewater-based epidemiology (WBE) is a complementary approach for monitoring substance use in the population. In this study we applied WBE technique to a community in the Moscow region to estimate population-level consumption of alcohol, tobacco and morphine. METHODS: Wastewater sampling was carried out over 47 days, in 2018 and 2019, including the New Year period. Analysis of the samples for consumption biomarkers (ethyl sulphate, cotinine and morphine) were undertaken using liquid chromatography tandem mass spectrometry (LC-MS/MS). Daily consumption estimates were then compared with sales/production/prescription data and between different days of the week using Mann-Whitney U test. RESULTS: Alcohol consumption was significantly higher on Sundays and during the New Year and Russian Christmas period compared to weekdays and Saturdays. Tobacco consumption estimates were largely consistent throughout the week. Morphine was detected by WBE during the monitoring period but was inconsistent with prescription record data. DISCUSSION AND CONCLUSIONS: This study provides evidence for the feasibility of conducting WBE in Russia. Estimates of alcohol consumption derived from WBE were higher than average alcohol sales data for the country. The estimated consumption of nicotine is generally consistent with the production data, with estimates higher than in most other countries. Our results also suggest potential illegal use of opioids (morphine-based) in the population. Given the considerable health and economic costs of substance use in Russia, more extensive WBE testing is recommended to inform and evaluate public health policies.

A novel simple and sensitive approach for determination of 1,1-dimethylhydrazine in aqueous samples by high performance liquid chromatography with ultraviolet and tandem mass spectrometric detection after derivatization with unsubstituted aromatic aldehydes.

In this work, simple, rapid and highly sensitive method of hazardous chemical 1,1-dimethylhydrazine (unsymmetrical dimethylhydrazine, UDMH) determination based on pre-column derivatization with unsubstituted aromatic aldehydes and reversed-phase high performance liquid chromatography-ultraviolet-tandem mass spectrometry (RP HPLC-UV-MS/MS) has been developed. Along with benzaldehyde, commercially available aromatic aldehydes, namely: 2-naphthaldehyde, 2-pyridinecarboxaldehyde, and 2-quinolinecarboxaldehyde, were used as derivatizing reagents in the analysis of hydrazines for the first time. The reactions were studied in a wide pH range by varying reaction time and other conditions. A slightly alkaline pH 9 was shown to be optimal for the derivatization of UDMH by aromatic aldehydes. The quantitative yield of derivatization products under the established conditions was confirmed by HPLC analysis with amperometric detection. For all studied reagents, wide linear ranges of concentrations (0.01-1000 µg/L) in natural water samples were observed. The limits of detection for UDMH in natural water were in the 3.7-130 ng/L range. 2-Quinolinecarboxaldehyde was selected as the most appropriate reagent for HPLC-UV-MS/MS determination of UDMH. In case of using this reagent, the accuracy was in the range of 97-102%, and precision, expressed as RSD was less than 8%. The developed approach does not require laborious stages of pre-concentration and isolation of UDMH from natural water components.

Manipulating selectivity of covalently-bonded hyperbranched anion exchangers toward organic acids. Part III: Effect of diamine structure in the external part of the functional layer.

The chromatographic properties of three hyperbranched anion exchangers having various diamines in the external part of the functional layer are studied in order to reveal diamine influence on selectivity toward mono- and divalent organic acids. The obtained stationary phases have the same structure of the internal part of the functional layer formed by repeating 4 modification cycles including alkylation with 1,4-butanediol diglycidyl ether (1,4-BDDGE) and amination with methylamine (MA) and differ by the structure of diamine used in the 5th modification cycle. For the first time several diamines (ethylenediamine, (2-aminoethyl)aminoethanol, and N,N'-bis(2-hydroxyethyl)ethylenediamine) are used for completing the last modification cycle in hyperbranching. The performance of three prepared anion exchangers is investigated using KOH and NaHCO3 as eluents and discussed with respect to the differences in hydrophilicity of the external part of the functional layer showing its effect on the separation of organic acids.

The comparison of retention behaviour of imidazoline and serotonin receptor ligands in non-aqueous hydrophilic interaction chromatography and supercritical fluid chromatography.

This work presents an investigation of retention characteristics of imidazoline and serotonin receptor ligands in non-aqueous hydrophilic interaction liquid chromatography (NA-HILIC) and supercritical fluid chromatography (SFC). The separation has been carried out by using methanol as a mobile phase modifier with addition of two types of additives (NH4HCOO; NH4HCOO/HCOOH) and two different stationary phases (diol; mixed-mode diol). The selectivity characteristics were observed based on S-factors, logk-logk plots and radar plots. NA-HILIC vs. SFC retention of tested compounds was also described by considering the molecular properties of the analytes within the LSER analysis. The differences between SFC vs. NA-HILIC retention of imidazoline and serotonin receptor ligands grow with the acid addition to a mobile phase, noticeably on mixed-mode diol stationary phase (S ≥ 87). In addition, the good selectivity performances of the certain NA-HILIC and SFC conditions were confirmed by good separation of structurally related compounds (α ≥ 2). The molecular basis of NA-HILIC and SFC retention were explained by using Abraham's equation. The dominant analyte descriptors influencing retention were hydrogen bonding and dipolar interactions. The current study will present the theory, and discuss the applicability within the SFC vs. NA-HILIC regimes. In this way, it was provided the placing of two relatively new methods (SFC, NA-HILIC) in the map of modern analytical chromatography in terms of the pharmaceutical analysis.

Manipulating selectivity of covalently-bonded hyperbranched anion exchangers toward organic acids. Part II: Effect of mono- and dicarboxylic amino acids in the internal part of the functional layer.

Four covalently-bonded hyperbranched anion exchangers based on poly(styrene-divinylbenzene) (PS-DVB) substrate with different structure of the functional layer were prepared using mono- and dianionic amino acids such as glycine, ß-alanine, aspartic acid, and glutamic acid in the internal part of the functional layer. Selectivity of all anion exchangers toward weakly retained organic acids was investigated at different temperatures in order to evaluate the effect of the number of carboxylic groups in the functional layer and its hydrophilicity on the separation. It was found that dianionic amino acids used in the first modification cycle of hyperbranching provide the best resolution for mono- and divalent organic acids, which makes the number of carboxylic groups in the structure of amino acid a key factor in the separation of such analytes with covalently-bonded hyperbranched anion exchangers, while the role of amino acid hydrophilicity is not that significant. Stationary phases prepared using aspartic and glutamic acids provided baseline resolution for quinic, glycolic, acetic, lactic, formic, and galacturonic acids, which are not resolved to baseline with modern commercially available anion exchangers; the increase of temperature was found to be favorable for improving the resolution even further.

Manipulating selectivity of covalently-bonded hyperbranched anion exchangers toward organic acids. Part I: Influence of primary amine substituents in the internal part of the functional layer.

Three covalently-bonded poly(styrene-divinylbenzene)-based (PS-DVB) hyperbranched anion exchangers prepared using primary amines with carboxylic, sulfonic or 2-hydroxyethyl substituents in the internal part of the functional layer were studied and compared for evaluating the effect of amines substituents on the chromatographic performance of the stationary phases. The hyperbranched coating was created on the surface of aminated PS-DVB substrate by repeating the modification cycles including alkylation with 1,4-butanediol diglycidyl ether (1,4-BDDGE) and amination with primary amine; glycine, taurine (2-aminoethanesulfonic acid) or ethanolamine were used in the first cycle, and 4 more cycles were conducted with methylamine (MA). The influence of the structure and type of primary amine used in the first cycle on the retention and selectivity toward inorganic anions, short-chain carboxylic acids, and polyphosphates was investigated using hydroxide eluent. The effect of temperature on the separation of organic acids was also studied for all stationary phases, which revealed the possibility to control and improve resolution for some pairs of analytes.

Anion exchangers with negatively charged functionalities in hyperbranched ion-exchange layers for ion chromatography.

Novel pellicular poly(styrene-divinylbenzene)-based (PS-DVB) anion exchangers with covalently-bonded hyperbranched functional ion-exchange layers containing negatively charged functionalities are obtained and examined. The hyperbranched coating is created on the surface of aminated PS-DVB substrate by repeating the modification cycles including alkylation with 1,4-butanediol diglycidyl ether (1,4-BDDGE), and amination of the terminal epoxide rings with methylamine (MA) or glycine (Gly). The influence of the position and the number of the layers with glycine, as well as of the total number of the layers of amine in the coating on the chromatographic properties of the obtained stationary phases is investigated. Chromatographic performance of the obtained stationary phases is evaluated using the model mixtures of inorganic and organic anions with hydroxide eluent. It is shown that the best selectivity toward weakly retained organic acids and oxyhalides is possessed by the anion exchanger obtained after 5 modification cycles, with glycine being used in the first one. Such anion exchanger packed in 25-cm long column is capable of separating 22 anions in 58min including 7 standard anions, mono-, di- and trivalent organic acids, oxyhalides, and some other double- and triple-charged anions.

Bovine serum albumin adsorbed on eremomycin and grafted on silica as new mixed-binary chiral sorbent for improved enantioseparation of drugs.

A new silica-based, mixed-binary chiral sorbent grafted with the macrocyclic antibiotic eremomycin and bovine serum albumin (BSA) was obtained. The sorbent-filled high-performance liquid chromatography column was capable of enantioseparation of racemic drugs, such as profens, in reversed-phase-chromatography mode. The mixed-binary eremomycin-BSA-sorbent showed better capability for profens enantioseparation as compared with a sorbent containing eremomycin only. BSA grafted onto the sorbent surface significantly reduced retention times of other proteins from the analyte solution, and free proteins (including BSA) injected as analytes were not retained on the column, and subsequently eluted with a dead volume. The drastic difference observed in the binding of profens and other proteins using the sorbent was tested for determination and enantioseparation of profens in artificial-urine solutions.

Transverse dispersion in ordered pillar arrays as a Markov chain: extension of the Galton-board model.

An extension of the Galton-board model of the transverse solute dispersion in laminar flow through ordered arrays of non-porous cylindrical pillars was proposed. In contrast to the original model, which describes the dispersion process as a one-dimensional random walk with independent, equally probable steps, the extended model treats the process as a Markov chain, namely as a random walk with such correlated steps that the velocity-dependent probability to make a step in the same direction as the preceding step is smaller than the probability to reverse the direction of motion. The relationship between the average squared transverse displacement of the solute and the number of steps in the chain was used to find the expression for the velocity dependence of the transverse dispersion coefficient. The obtained equation differs from the one in the Galton-board model by the multiplier that accounts for the leveling-off of the experimental dependences at high reduced velocities. Although this modified Galton-board model cannot be directly applied to low velocities, a few additional assumptions lead to the expression that fits the whole range of the recent simulated dispersion data well.

Clarithromycin as a chiral selector for enantioseparation of basic compounds in nonaqueous capillary electrophoresis.

The first use of macrolide antibiotic clarithromycin (CLM) in nonaqueous media for enantioseparation (partial or baseline) of the following compounds: alprenolol, atenolol, metoprolol, clenbuterol, methoxyphenamine, pindolol, propranolol, sotalol, synephrine, labetalol, and fenoterol is reported. Each analysis took less than 15 min. To find optimal separation conditions, some properties of CLM (adsorption, solubility), as well as the effect of experimental parameters on the enantioseparation of analytes (background electrolyte composition, chiral selector concentration, temperature, and applied voltage) were studied. The best chiral resolution was achieved in methanolic solution of 100 mM citric acid, 10 mM NaOH, 240-300 mM H3 BO3 , and 60-75 mM CLM. Using the proposed procedure, adsorption of CLM on the capillary wall was negligible and the repeatability of the migration times (RSD) was as good as 1.6%. For the analysis of propranolol, the linearity was achieved in the concentration range 2.5 × 10(-2) - 3.0 × 10(-1) mg/mL with the LODs (3 × S/N) being equal 2.6 × 10(-3) mg/mL and 2.8 × 10(-3) mg/mL for the first and the second enantiomers, respectively. Linear range for metoprolol enantiomers was 1.0 × 10(-2) -1.6 × 10(-1) mg/mL. The LODs (3 × S/N) were determined as 2.8 × 10(-3) and 3.0 × 10(-3) mg/mL for the first and the second enantiomers, respectively.

Direct liquid chromatographic determination of hydrazines: a review.

Today the determination of hydrazines is an important application in analytical chemistry. This review shows the current state-of-the-art analyses and discusses the merits of the direct chromatographic methods for the determination of hydrazines such as ion-, ion-exclusion, ion-pair and hydrophilic interaction chromatography. The methodological aspects of the separation and detection of hydrazines are considered for these methods. Examples of hydrazine determination in real samples are presented.

Enantioseparation of organic acids of pharmaceutical interest using eremomycin as a chiral selector.

Strong adsorption of eremomycin on the fused-silica capillary wall was used for separation of enantiomers by CE. The capillary with adsorbed chiral selector was shown to be easily prepared and has reproducible properties. The effect of the chiral selector concentration, pH and composition of the BGE, and applied voltage on enantioseparation of acidic compounds, such as profens and aromatic carboxylic acids, was investigated. Two native α-amino acids, aspartic acid and glutamic acid, were enantioseparated. Fourteen tested compounds (including amino acids) were baseline resolved. Good selectivity of separation (α>1.09) was achieved. The migration order of ibuprofen and ketoprofen enantiomers was determined. The procedures were proposed for the analysis of flurbiprofen and warfarin in pharmaceuticals. Linearity was achieved in the concentration range of 4.0×10(-5)-2.0×10(-3) M for flurbiprofen and 3.2×10(-6)-4.9×10(-6) M for warfarin. The detection limits were found to be about 1×10(-5) M for flurbiprofen and 1×10(-6) M for warfarin.

Effect of monomer mixture composition on structure and chromatographic properties of poly(divinylbenzene-co-ethylvinylbenzene-co-2-hydroxyethyl methacrylate) monolithic rod columns for separation of small molecules.

Porous poly(divinylbenzene-co-ethylvinylbenzene-co-2-hydroxyethyl methacrylate) monoliths were synthesized via thermally initiated free-radical polymerization in confines of surface-vinylized glass columns (150 mm × 3 mm i.d.) and applied to the reversed-phase separation of low-molecular-weight aromatic compounds. In order to compensate for the polymer shrinkage during the synthesis and prevent the monolith from detachment from the column wall, polymerization was conducted under nitrogen pressure. The reaction proceeded at 60°C for 22 h. 2,2'-Azo-bis-isobutironitrile was used as the initiator and 1-dodecanol was used as the porogen. A series of monoliths with different monomer ratios were obtained. All the monoliths had high specific surface areas ranging from 370 to 490 m(2)/g. In the studied range of monomer mixture compositions, the mechanical stability of the stationary phase in water/acetonitrile eluents was found to be high enough and practically insensitive to the fraction of 2-hydroxyethyl methacrylate (HEMA). Increasing the molar fraction of HEMA from 10.5% to 14.7% resulted in the decrease of column permeability by two orders of magnitude (from 1.1×10(-12) to 1.8×10(-14) m(2)) and led to weaker retention of alkylbenzenes. The higher HEMA content was shown to reduce the plate height of the columns in the separation of small molecules from 160-490 µm to 40-76 µm. This was attributed mainly to the decrease of the domain size of the monoliths leading to lower eddy dispersion and mass transfer resistance in the column.

Chiral analysis of pharmaceuticals by capillary electrophoresis using antibiotics as chiral selectors.

The review summarizes the use of the chiral capillary electrophoresis (CE) with different class of antibiotics as chiral selectors in the pharmaceutical field. Basic factors influencing the enantioseparation are shortly discussed. Non-aqueous capillary electrophoresis is also included as well as the coupling of CE to MS. The selection of a chiral selector according the ionic state and structure of the analyte is described. Summary of pharmaceutical applications of chiral CE is given.

Enantiorecognition of profens by capillary electrophoresis using a novel chiral selector eremomycin.

The evaluation of a macrocyclic glycopeptide antibiotic, eremomycin, as a chiral selector in capillary electrophoresis (CE) has been performed. The stability of eremomycin in solution and capillary electrolyte, as well as its optical and electrophoretic properties have been discussed. The effect of experimental parameters influencing the enantioseparation of several profens has been studied. Excellent enantioseparation of profens has been achieved and migration order has been validated. Comparison of enantioseparations of profens in CE by using eremomycin-mediated electrolytes and in HPLC with eremomycin immobilized on silica has revealed similar trends for both methods.

The selectivity in MEKC of pseudo-stationary phases based on polyelectrolyte complexes: I. Composition of the complex.

Polyelectrolyte-surfactant complexes (PSC) of polycarboxylic acids with alkyl-trimethylammonium salts look very promising as a new type of pseudo-stationary phase in micellar electrokinetic chromatography. PSC produce an intramolecular micellar phase, and the morphology of the micelles is significantly different from that of the corresponding "typical" surfactant micelles. Pseudo-stationary phases based on PSC have unique selectivity. In this paper, the effect of the composition (phi) of the PSC of polyacrylic acid (PAA) M(W) 130,000 with dodecyltrimethylammonium bromide (DTAB) and of the PSC of PAA M(W) 450,000 with DTAB on the separation of DNS-amino acids and phenol derivatives in these systems was investigated. Relative retention and relative selectivity were used to describe the electrophoretic behavior of the amino acids and phenol derivatives. The main advantage of PSC pseudo-phases is that the nature and the structure of micelle-like units, and hence the selectivity of electrophoretic separation, could easily be modified by changing the composition of the complex.

Micellar electrokinetic chromatography with polyelectrolyte complexes as micellar pseudo-stationary phases.

The separation of dansyl (DNS-AAs) and carbobenzoxy (CBZ-AAs) amino acids using micellar electrokinetic chromatography employing polyelectrolyte-surfactant complexes (PSC) formed in the reaction between polyacrylic acid (PAA) and dodecyltrimethylammonium bromide (DTAB) as pseudo-stationary phases was described. The PSCs were stabilized by hydrophobic interactions of alkyl chains of the surfactant ions and converted to an intramolecular micellar-like phase. The running buffer was a 50mM solution of sodium phosphate (pH 6.0) containing 4.6-20.2mM PSC, in which a part of carboxyl groups of PAA was blocked by aliphatic amines. For the systems with 7.9mM of PAA/DTAB complex (phi=0.30, phi-composition of water-soluble polyelectrolyte complex) as a pseudo-stationary phase, the peaks of six dansyl amino acids (DNS-AAs) were baseline resolved. The separation in this case is based on a complex distribution mechanism of the dansyl derivatives between the free buffer and the intramolecular micellar-like phase of the water-soluble PSC. On the other hand, the additives of PAA/DTAB complex (phi=0.30) to the running buffer does not essentially affect on the electrophoretic behaviour of the CBZ-AAs, the variant MEKC is not realized. The influence of the concentration of the complex of PAA/DTAB on the electrophoretic behaviour of analytes was investigated. Relative retentions and relative selectivities were used for describing electrophoretic behaviour of the amino acid derivatives.

Application of water-soluble polymers as modifiers in electrophoretic analysis of phenols.

A review of application of water-soluble cationic, anionic and nonionic polymers as pseudostationary phases in capillary electrophoresis (CE) and micellar electrokinetic capillary chromatography (MEKC) is presented. The effect of the structure of the polymers on the selectivity and efficiency of separation is discussed. A novel specially designed cationic polymer, 2,10-ionene, has been used for the separation of phenols. The polymer has hydrophilic and hydrophobic parts in its backbone. The polymer shows the best selectivity as a modifier in capillary zone electrophoresis (CZE)-mode, which allows the selective determination of both hydrophilic and hydrophobic phenols.

Sulfonated and sulfoacylated poly(styrene-divinylbenzene) copolymers as packing materials for cation chromatography.

Three different types of cation exchangers were produced from four basic poly(styrene-divinylbenzene) substrates with different properties. Porous PS-DVB resin beads were functionalized by sulfonation and sulfoacylation under various conditions to produce sulfonated resins with exchange capacities of 0.03-1.80 mM g(-1). The matrix with 50% of cross-linking is most suitable for updating by the proposed technique. Sulfuric and chlorosulfonic acids were used as the reagents for sulfonation. The sulfonating conditions, capacities, and the technique of the synthesis are given. The effects of parameters of the sulfonation reaction and the composition of the reactionary mixture on ion-exchange capacity of the sorbents were investigated. Selectivity and efficiency of the separation of some inorganic cations and derivatives of amines and hydrazines on the resins obtained are compared by ion chromatography with conductometric detection. As a result, the sulfoacylated resin was proved more efficient for the separation of these analytes. The resolution of the analytes strongly depends on the degree of functionalization. The best performance about 19,000 plates m(-1) was obtained using the sulfopropionylated beads with an ion-exchange capacity of 0.3 mM g(-1). The prepared sulfoacylated cation exchanger was compared with the commercially available Dionex CS-12 packing material. It was found that the separation of alkaline ions and 1,1-dimethylhydrazine (UDMH) were much better that those for the commercial material.