Hydrothermal Valorization of Biosugars with Heterogeneous Catalysts: Advances, Catalyst Deactivation, Mitigation Strategies and Perspectives.

Sustainable production of valuable biochemicals and biofuels from lignocellulosic biomass necessitates the development of durable and high-performance catalysts. To assist the next stage catalyst design for hydrothermal treatment of biosugars, this paper provides a critical review of (1) recent advances in biosugar hydrothermal valorization using heterogeneous catalysts, (2) the deactivation process of catalysts based on recycling tests of representative biosugar hydrothermal treatments, (3) state-of-the-art understandings of the deactivation mechanisms of heterogeneous catalysts, and (4) strategies of preparing durable catalysts and the regeneration of deactivated catalysts. Based on the review, challenges and perspectives are proposed. Some remarkable achievements in heterogeneous catalysis of biosugars are highlighted. The understanding of catalyst durability needs to be further increased based on full examination of the catalytic performance based on the conversion of substrates, the yield and selectivity of products. Further, a full examination of the physiochemical changes based on multiple characterization techniques is required to illuminate the relationships between treatment variables and catalyst durability. Collectively, a clear understanding of the relationships between chemical reaction pathways, treatment variables and the physiochemistry of catalysts is encouraged to be gained to advise the development of heterogeneous catalysts for long-term and efficient hydrothermal upgrading of biosugars.

Renewable hemicellulose-based materials for value-added applications.

The importance of renewable resources and environmentally friendly materials has grown globally in recent time. Hemicellulose is renewable lignocellulosic materials that have been the subject of substantial valorisation research. Due to its distinctive benefits, including its wide availability, low cost, renewability, biodegradability, simplicity of chemical modification, etc., it has attracted increasing interest in a number of value-added fields. In this review, a systematic summarizes of the structure, extraction method, and characterization technique for hemicellulose-based materials was carried out. Also, their most current developments in a variety of value-added adsorbents, biomedical, energy-related, 3D-printed materials, sensors, food packaging applications were discussed. Additionally, the most recent challenges and prospects of hemicellulose-based materials are emphasized and examined in-depth. It is anticipated that in the near future, persistent scientific efforts will enable the renewable hemicellulose-based products to achieve practical applications.

The CBM91 module enhances the activity of ß-xylosidase/α-L-arabinofuranosidase PphXyl43B from Paenibacillus physcomitrellae XB by adopting a unique loop conformation at the top of the active pocket.

Carbohydrate-binding module (CBM) family 91 is a novel module primarily associated with glycoside hydrolase (GH) family 43 enzymes. However, our current understanding of its function remains limited. PphXyl43B is a ß-xylosidase/α-L-arabinofuranosidase bifunctional enzyme from physcomitrellae patens XB belonging to the GH43_11 subfamily and containing CBM91 at its C terminus. To fully elucidate the contributions of the CBM91 module, the truncated proteins consisting only the GH43_11 catalytic module (rPphXyl43B-dCBM91) and only the CBM91 module (rCBM91) of PphXyl43B were constructed, respectively. The result showed that rPphXyl43B-dCBM91 completely lost hydrolysis activity against both p-nitrophenyl-ß-D-xylopyranoside and p-nitrophenyl-α-L-arabinofuranoside; it also exhibited significantly reduced activity towards xylobiose, xylotriose, oat spelt xylan and corncob xylan compared to the control. Thus, the CBM91 module is crucial for the ß-xylosidase/α-L-arabinofuranosidase activities in PphXyl43B. However, rCBM91 did not exhibit any binding capability towards corncob xylan. Structural analysis indicated that CBM91 of PphXyl43B might adopt a loop conformation (residues 496-511: ILSDDYVVQSYGGFFT) to actively contribute to the catalytic pocket formation rather than substrate binding capability. This study provides important insights into understanding the function of CBM91 and can be used as a reference for analyzing the action mechanism of GH43_11 enzymes and their application in biomass energy conversion.

Correction: Critical role of hydrogen bonding between microcrystalline cellulose and g-C3N4 enables highly efficient photocatalysis.

Correction for 'Critical role of hydrogen bonding between microcrystalline cellulose and g-C3N4 enables highly efficient photocatalysis' by Zhaoqiang Wang et al., Chem. Commun., 2024, 60, 204-207, https://doi.org/10.1039/D3CC04800D.

Meta-analysis of the efficacy and safety of Ginkgolide Meglumine Injection combined with Butylphthalide in the treatment of Acute Ischemic Stroke.

OBJECTIVE: To evaluate the efficacy and safety of Ginkgolide Meglumine Injection (GMI) combined with Butylphthalide in the treatment of Acute Ischemic Stroke (AIS), and provide reference for rational clinical medication. METHODS: PubMed, Embase, Web of science, CNKI, Wanfang, VIP and other databases were searched for published studies on the treatment of AIS with GMI combined with Butylphthalide in both Chinese and English. The search period was from the establishment of the database to July 2023. The included studies that met the inclusion criteria were analyzed using RevMan 5.3 software for Meta-analysis. RESULTS: A total of 25 studies involving 2362 patients (experimental group = 1182, control group = 1180) were included. The results of meta-analysis showed that the overall effective rate of the experimental group was significantly higher than that of the control group [RR = 1.21, 95% CI (1.16, 1.26), P< 0.00001]. In addition, compared with the control group, the experimental group showed significant improvement in NIHSS score [SMD = -1.59, % CI (-2.00-1.18), P< 0.00001] and ADL score [SMD = 2.12, 95% CI (1.52, -2.72), P<0.00001], significant decrease in CRP [SMD = -2.24, 95% CI (-3.31, -1.18), P<0.0001] and TNF-α [SMD = -2.74, 95% CI (-4.45, -1.03), P< 0.005] levels, and improvement in plasma viscosity [SMD = -0.86, 95% CI (-1.07, -0.66), P< 0.00001]. However, the influence on homocysteine level remains inconclusive. Furthermore, there was no significant difference in the incidence of adverse reactions between the two groups [SMD = 0.95, 95% CI (0.71, 1.28), P> 0.05]. CONCLUSION: GMI combined with Butylphthalide shows good clinical application effects and good safety in the treatment of AIS. However, more large-sample, multicenter, randomized controlled are needed to confirm these findings.

Clinicopathological features of radioactive iodine-refractory differentiated thyroid cancer / 重庆医学

Objective To investigate the clinicopathological characteristics of radioactive Iodine-refrac-tory differentiated thyroid cancer(RAIR-DTC)to provide a clinical evidence for early prediction of the thyroid cancer patients with radioactive Iodine-refractory(RAIR).Methods The data of 84 patients with undergoing thyroidectomy and 131I therapy in PLA 960 hospital from January 2010 to December 2019 were retrospectively analyzed.Thirty-nine patients with diagnosed RAIR-DTC served as the study group and 45 cases of radioactive iodine-avid differentiated thyroid cancer(RAIA-DTC)served as the control group.The clinicopathological characteristics were compared between the two groups.The logistic regression was used to analyze the inde-pendent risk factors of RAIR-DTC,and the RAIR-DTC prediction model was established.Results Compared with the RAIA-DTC group,the RAIR-DTC group had more iodine treatment times,the proportions of the pa-tients with age ≥55 years old,total iodine therapeutic dose,distant metastasis,TNM stage Ⅳ,high-risk sub-types and focal calcification were higher,the tumor maximum diameter was greater,the number of lymph node metastases was more and the probability of Ⅱ,Ⅰ+Ⅱ and non-central lymph node metastases was higher(P＞0.05).The progression-free survival rate had statistical difference between the two groups(P＜0.05).The total survival rate had no statistical difference between the two groups(P＞0.05).The binary logistic re-gression analysis results showed that the distant metastasis,high-risk histological subtype and maximum tumor diameter ≥10.5 mm were the independent risk factors for RAIR-DTC.The obtained fitting equation logit(P)=-2.259+3.330X1+2.287X2+1.606X3,the ROC curve was used to calculate the truncation val-ue of the fitted equation as-0.312 5,when logit(P)＞-0.312 5,it might develop into RAIR-DTC.Conclusion The clinicopathological characteristics of the patients with differentiated thyroid cancer could ef-fectively predict RAIR.

Analysis of anti-PD-1/PD-L1 therapeutic effect and intestinal flora characteristics in patients with non-small cell lung cancer / 国际检验医学杂志

Objective To analyze the therapeutic effect of anti-programmed death receptor 1(PD-1)/pro-grammed death ligand 1(PD-L1)and the characteristics of intestinal flora in patients with non-small cell lung cancer(NSCLC).Methods A total of 81 NSCLC patients admitted to the People's Hospital of Xinjiang Uygur Autonomous Region from January 2020 to January 2022 were taken as the research object.According to the patients'immunotherapy response,the patients were divided into non-response group and response group.The differences in clinical data and intestinal flora distribution between the two groups were compared,and the correlation between PFS and intestinal flora a diversity index was analyzed by Spearman correlation.Results The proportion of smoking patients in response group was significantly lower than that in non-re-sponse group,and the difference was statistically significant(x2=4.648,P=0.031).Chao1 index,ACE index and shannon wiener index patients in non-response group were lower than those in response group,while Simpson diversity index was higher than that in response group,with statistical significance(P＜0.05).Chao1 index,ACE index and shannon wiener index were positively correlated with PFS(r=0.526,0.579 and 0.539,all P＜0.05),while Simpson diversity index was negatively correlated with PFS(r=-0.867,P＜0.001).The principal coordinate analysis was used to analyze the β diversity structure of intestinal flora.The first principal component contribution rate was 70.36％,and the second principal component contribution rate was 16.63％.Conclusion The diversity and distribution of intestinal flora in NSCLC patients are related to anti-PD-1/PD-L1 therapy.The higher the diversity of intestinal flora,the more sensitive the anti-PD-1/PD-L1 therapy.

Association of Polymorphisms in the 3'UTR of Genes in the ERK1/2 Signaling Pathway with Non-small Cell Lung Cancer / 昆明医科大学学报

Objective To investigate the association between four single nucleotide polymorphisms(SNP)(rs9340 in MAPK1,rs14804 in NRAS,rs712 and rs7973450 in KRAS)in the 3'UTR of ERK1/2 signaling pathway-related genes and non-small cell lung cancer(NSCLC).Methods A total of 478 NSCLC patients and 480 healthy controls were enrolled in this study.Four SNPs were genotyped by using TaqMan assays.The association between the four SNPs and NSCLC was analyzed.Results The distribution frequency difference of the allele of rs9340 was statistically significant between the control group and the non-small cell squamous cell carcinoma(SCC)group(P = 0.009),suggesting that the G allele of rs9340 may be a protective factor for non-small cell lung squamous cell carcinoma(OR = 0.67,95%CI:0.50～0.91).In addition,in the<50 years age group,the distribution frequency difference of the allele of rs9340 was statistically significant between the control group and the NSCLC group(P = 5.07×10-4),indicating that the G allele of rs9340 may be a protective factor for NSCLC(OR = 0.46,95%CI:0.29～0.72).Conclusion The SNP rs9340 in MAPK1 may be associated with the risk of NSCLC.

Conical beam CT measurement of alveolar bone structure remodeling in patients with skeletal class Ⅲ malocclusion after orthodontic-orthognathic treatment / 中国组织工程研究

BACKGROUND:Most of the studies on combined orthodontic-orthognathic treatment of skeletal class Ⅲ malocclusions have focused on the improvement of the patient's lateral appearance and recovery in the later stages of the treatment,while there are fewer studies observing the microcosmic nature of the alveolar bone remodeling of the lower anterior teeth. OBJECTIVE:To evaluate the therapeutic effect of lower anterior tooth decompensation and alveolar bone remodeling in patients with skeletal class Ⅲ malocclusion before and after orthodontic-orthognathic treatment based on oral X-ray lateral films and oral cone-beam CT. METHODS:From January 2015 to May 2023,15 patients with skeletal class Ⅲ malocclusion who underwent orthodontic-orthognathic surgery at Qingdao Hospital of Rehabilitation University were enrolled.All patients underwent lateral cephalography and cone beam computed tomography before and after treatment.Cephalometric measurement items related to the angle and line distance,lip/lingual bone cracking length(d-La/d-Li)and bone cracking/bone fenestration of the lower anterior teeth before and after treatment were measured. RESULTS AND CONCLUSION:Lateral X-ray films showed that the amount of alveolar bone remodeling after decompensation of the lower anterior teeth showed significant changes compared to before treatment.The root of the tooth moved significantly towards the center of the alveolar bone,and the specific data was closer to normal data,but there were still some differences compared with normal individuals.Based on the cone-beam CT measurement,the bone cracking/bone fenestration length and width of the alveolar bone were improved in almost all the teeth after orthodontic-orthognathic combined treatment,alveolar bone remodeling in some teeth even reached the level of healthy individuals.Before treatment,most patients often experienced bone fenestration/cracking on the lip/lingual side of the lower incisor due to compensatory tooth growth.However,during the preoperative orthodontic stage,decompensation triggered alveolar bone remodeling and significant changes in tooth angle.Preoperative orthodontic treatment caused the upper anterior teeth to retract and the lower anterior teeth to tilt and control the root,but the amount of decompensation before surgery was often insufficient.In the orthognathic surgery stage,the jaw was removed through the positioning guide plate,the maxilla moved forward,and the mandible retreated.During the postoperative orthodontic process,the effect of fine adjustment was better.Although there is a certain degree of recurrence trend in the position of teeth and jawbones,the postoperative orthodontic treatment is closer to the normal value.

Finite element modal analysis of whole spine in adolescent idiopathic scoliosis / 中国组织工程研究

BACKGROUND:Vibration environment can cause spinal injury,especially in patients with scoliosis.At present,there is no information about the inherent mode of the whole spine from T1 to the pelvis in scoliosis patients in the free state. OBJECTIVE:To analyze the dynamic characteristics of the whole spine in patients with scoliosis by the finite element method. METHODS:Based on CT scan images,a three-dimensional finite element model of the T1-pelvic total spine of an 11-year-old patient with thoracolumbar biflexion scoliosis was established,and the Cobb angles of thoracolumbar scoliosis were 36° and 24°,respectively.The mode analysis in the free state of the whole spine was carried out by the finite element method. RESULTS AND CONCLUSION:The fifteen-order free modes of the spine were extracted,and the dynamic characteristics of the scolio-curved spine were obtained.The resonance frequency distribution of the spine was concentrated.The thoracic vertebra was the most deformed in the whole spine model,and the amplitude of the thoracic vertebra was larger than that of the lumbar vertebra.Modal analysis was used to analyze the vibration characteristics of scoliosis patients in the vibration environment.It is of great significance to determine the natural frequency,vibration mode,and amplitude of scoliosis patients for analyzing the vibration characteristics of scoliosis.

Three-dimensional finite element study on the effect of posterior tooth forward movement on temporomandibular joint stress in orthodontic reduction patients / 中国组织工程研究

BACKGROUND:Temporomandibular joint disorders are closely related to high stress in temporomandibular joint.With the change of molar position after tooth reduction extraction,the establishment of new occlusal relationship often leads to the change of internal stress environment of the temporomandibular joint. OBJECTIVE:To analyze the stress distribution of temporomandibular joint in patients undergoing orthodontic reduction tooth extraction with different degrees of molar forward movement using the three-dimensional finite element model of the maxillary complex and temporomandibular joint. METHODS:A case of individual normal occlusal patient was selected from the Orthodontics Department of Qingdao Municipal Hospital,Shandong Province,and the finite element models of 1/3 anterior molar space(extraction of four second premolar teeth)before and after reduction and 2/3 anterior molar space(extraction of 4 second premolar teeth)after reduction were established based on the cone-beam CT and MRI data.ABAQUS software was used to analyze the stress distribution of various parts of the temporomandibular joint during the interposition of tooth tips. RESULTS AND CONCLUSION:The stress distribution of the condyle,articular disc,and osteoarticular fossa in the model before and after the reduction was basically the same.The stress of the condyle was mainly distributed in the anterior and apical part of the condyle,the stress of the articular disc was mainly distributed in the middle band and lateral part of the articular disc,and the stress of the articular fossa was mainly concentrated in the anterior and apical part of the articular fossa.However,the equivalent stress value of the condyle,articular disc and articular fossa decreased after reduction.After orthodontic reduction extraction,the equivalent stress values of condyle and articular disc in the 1/3 anterior molar space model were smaller than those in the 2/3 anterior molar space model.From the perspective of biomechanics,orthodontic reduction extraction can reduce the stress of the temporomandibular joint and provide a good biomechanical environment.

Predictive values of IL-6 and IL-10 in the peripheral blood of donor of brain death for delayed graft function / 中国医科大学学报

Objective To investigate the predictive values of interleukin(IL)-6 and IL-10 in the peripheral blood of donors of brain death for delayed graft function(DGF)in kidney transplant recipients.Methods The clinical data and blood samples of 21 donors of brain death and 42 kidney transplant recipients were retrospectively collected.The predictive values of IL-6 and IL-10 in the peripheral blood of donors for DGF were evaluated using the occurrence of DGF as a dependent variable.Results Among the 42 kidney transplant recipients,10 developed DGF.Univariate analysis showed that there were significant differences in the IL-6 and creatinine levels in the donors and cold ischemia time of donor kidney between DGF and non-DGF groups.The receiver operating characteristic curve showed that IL-6 and IL-10 in donor peripheral blood had certain predictive values for DGF in kidney transplant recipients(AUC=0.82,95%CI:0.64-0.99;AUC=0.73,95%CI:0.51-0.95).Despite adjusting for creatinine level and cold ischemia time,IL-6 still has a certain predictive value for DGF.Conclusion IL-6 in the peripheral blood of donors of brain death may be a predictor of DGF in kidney transplant recipients.

Auxiliary diagnostic value of T cells spot test of Mycobacterium tuberculosis infection for pulmonary and extra-pulmonary tuberculosis among the elderly / 中国血吸虫病防治杂志

Objective To evaluate the auxiliary diagnostic value of T cells spot test of Mycobacterium tuberculosis infection (T-SPOT.TB) for pulmonary and extra-pulmonary tuberculosis among the elderly. Methods A total of 173 elderly patients at ages of 60 years and older and with suspected tuberculosis that were admitted to People’s Hospital of Xinjiang Uygur Autonomous Region during the period from October 2022 through February 2024 were enrolled, and all patients underwent T-SPOT.TB, acid fast staining and GeneXpert MTB/RIF tests. The etiological tests of MTB served as a gold standard, and the diagnostic values of T-SPOT.TB, acid fast staining and GeneXpert MTB/RIF tests for pulmonary and extra-pulmonary tuberculosis were compared among the elderly patients. Results Of the 173 elderly patients suspected of tuberculosis, there were 44 patients definitely diagnosed with pulmonary tuberculosis, 30 cases with extra-pulmonary tuberculosis, and 99 cases without tuberculosis. The sensitivities of T-SPOT.TB, acid fast staining and GeneXpert MTB/RIF tests were 86.5%, 27.0% and 54.1% for diagnosis of tuberculosis. The sensitivities of T-SPOT.TB were 86.4% and 86.7% for diagnosis of pulmonary tuberculosis and extra-pulmonary tuberculosis, with an 80.8% specificity for diagnosis of tuberculosis. The sensitivities of GeneXpert MTB/RIF were 56.8% and 50.0% for diagnosis of pulmonary tuberculosis and extra-pulmonary tuberculosis, with a 100.0% specificity each, and the sensitivities of acid fast staining were 31.8% and 20.0% for diagnosis of pulmonary tuberculosis and extra-pulmonary tuberculosis, with a 100.0% specificity each. In addition, the areas under the receiver operating characteristic curve were 0.836, 0.635 and 0.770 for diagnosis of tuberculosis with T-SPOT.TB, acid fast staining and GeneXpert MTB/RIF tests among the elderly patients, respectively. Conclusion T-SPOT.TB has a high auxiliary diagnostic value for both pulmonary and extra-pulmonary tuberculosis among elderly patients.

Protective effect and mechanism of quercetin on cardiac and renal functions in rats with cardiorenal syndrome / 中国药房

OBJECTIVE To investigate the protective effect and mechanism of quercetin on the cardiac and renal functions of rats with cardiorenal syndrome （CRS） based on the phosphoinositide 3-kinase （PI3K）/protein kinase B （Akt）/nuclear factor kappa- B （NF-κB） signaling pathway. METHODS CRS model of SD rats was induced by left anterior descending coronary artery ligation combined with acute renal ischemia-reperfusion. Model rats were randomly separated into model group， quercetin low-dose group （35 mg/kg）， quercetin high-dose group （70 mg/kg）， high-dose of quercetin+740Y-P group （70 mg/kg quercetin+3.5 mg/kg PI3K/Akt/ NF-κB signaling pathway activator 740Y-P）， with 12 rats in each group. Another 12 normal rats were selected as sham operation group. They were given relevant drugs， once a day， for 14 consecutive days. After administration， the cardiac function indexes [left ventricular ejection fraction （LVEF）， end-diastolic volume （EDV）， isovolumic relaxation time （IVRT）] and renal function indicators [blood urea nitrogen （BUN）， 24-hour urine protein， and serum creatinine （Scr）] were detected， and fibrosis in the cardiac and renal tissues was observed； the levels of inflammatory indexes [interleukin-1β （IL-1β） and tumor necrosis factor-α （TNF-α）] in the serum and cardiac and renal tissues as well as the expression of PI3K/Akt/NF-κB pathway-related proteins in the cardiac and renal tissues were detected. RESULTS Compared with sham operation group， the levels of BUN， 24-hour urine protein and Scr， collagen volume fraction of cardiac and renal tissues， the levels of IL-1β and TNF-α in serum and cardiac and renal tissues， and the phosphorylation of PI3K， Akt and NF-κB p65 protein in cardiac and renal tissues were increased significantly in model group （P＜0.05）； the levels of LVEF， IVRT and EDV were reduced significantly （P＜0.05）. Compared with the model group， the above indexes were reversed significantly in quercetin low-dose and high-dose groups （P＜0.05）， and the reversal effect was better in the high-dose group （P＜0.05）. 740Y-P restored the reverse effect of high-dose quercetin on the indexes （P＜0.05）. CONCLUSIONS Quercetin can alleviate cardiac and renal fibrosis and function injury， the mechanism of which may be 20232016） associated with inhibiting the activation of the PI3K/Akt/NF-κB signaling pathway.

Association between congenital hypothyroidism and in-hospital adverse outcomes in very low birth weight infants / 中华儿科杂志

Objective: To investigate the association between congenital hypothyroidism (CH) and the adverse outcomes during hospitalization in very low birth weight infants (VLBWI). Methods: This prospective, multicenter observational cohort study was conducted based on the data from the Sino-northern Neonatal Network (SNN). Data of 5 818 VLBWI with birth weight <1 500 g and gestational age between 24-<37 weeks that were admitted to the 37 neonatal intensive care units from January 1st, 2019 to December 31st, 2022 were collected and analyzed. Thyroid function was first screened at 7 to 10 days after birth, followed by weekly tests within the first 4 weeks, and retested at 36 weeks of corrected gestational age or before discharge. The VLBWI were assigned to the CH group or non-CH group. Chi-square test, Fisher exact probability method, Wilcoxon rank sum test, univariate and multivariate Logistic regression were used to analyze the relationship between CH and poor prognosis during hospitalization in VLBWI. Results: A total of 5 818 eligible VLBWI were enrolled, with 2 982 (51.3%) males and the gestational age of 30 (29, 31) weeks. The incidence of CH was 5.5% (319 VLBWI). Among the CH group, only 121 VLBWI (37.9%) were diagnosed at the first screening. Univariate Logistic regression analysis showed that CH was associated with increased incidence of extrauterine growth retardation (EUGR) (OR=1.31(1.04-1.64), P<0.05) and retinopathy of prematurity (ROP) of stage Ⅲ and above (OR=1.74(1.11-2.75), P<0.05). However, multivariate Logistic regression analysis showed no significant correlation between CH and EUGR, moderate to severe bronchopulmonary dysplasia, grade Ⅲ to Ⅳ intraventricular hemorrhage, neonatal necrotizing enterocolitis in stage Ⅱ or above, and ROP in stage Ⅲ or above (OR=1.04 (0.81-1.33), 0.79 (0.54-1.15), 1.15 (0.58-2.26), 1.43 (0.81-2.53), 1.12 (0.70-1.80), all P>0.05). Conclusion: There is no significant correlation between CH and in-hospital adverse outcomes, possibly due to timely diagnosis and active replacement therapy.

Critical role of hydrogen bonding between microcrystalline cellulose and g-C3N4 enables highly efficient photocatalysis.

Developing a highly efficient photocatalyst for energy and environmental applications is urgently required. Herein, graphitic carbon nitride (CN) coupled with microcrystalline cellulose (MCC) (denoted as MCC-X/CN) shows excellent photocatalytic performance for tetracycline (TC) degradation and H2 evolution. And the optimized MCC-0.05/CN shows an improved TC degradation rate (Kapp = 0.019 min-1) and H2 evolution rate (642.71 µmol g-1 h-1), which are 1.9 and 22 times higher than those of pure CN, respectively. This improvement primarily results from hydrogen bonding (H-bonding) between CN and MCC, which enables excellent charge separation and migration, leading to the outstanding photoelectrochemical properties of MCC-0.05/CN.

Stretchable and Durable Bacterial Cellulose-Based Thermocell with Improved Thermopower Density for Low-Grade Heat Harvesting.

Low-grade heat exists ubiquitously in the environment, and gel-state thermogalvanic cells (GTCs) can directly convert thermal energy into electricity by a redox reaction. However, their low ionic conductivity and poor mechanical properties are still insufficient for their potential applications. Here, we designed a bacterial cellulose (BC) nanofiber-macromolecular entanglement network to balance the GTC's thermopower and mechanical properties. Therefore, the BC-GTC shows a Seebeck coefficient of 3.84 mV K-1, an ionic conductivity of 108.5 mS cm-1, and a high specific output power density of 1760 µW m-2 K-2, which are much higher than most current literature. Further connecting 15 units of BC-GTCs, the output voltage of 3.35 V can be obtained at a temperature gradient of 65 K, which can directly power electronic devices such as electronic calculators, thermohydrometers, fans, and light-emitting diodes (LEDs). This work offers a promising method for developing high-performance and durable GTC in sustainable green energy.

Bonding wood with uncondensed lignins as adhesives.

Plywood is widely used in construction, such as for flooring and interior walls, as well as in the manufacture of household items such as furniture and cabinets. Such items are made of wood veneers that are bonded together with adhesives such as urea-formaldehyde and phenol-formaldehyde resins1,2. Researchers in academia and industry have long aimed to synthesize lignin-phenol-formaldehyde resin adhesives using biomass-derived lignin, a phenolic polymer that can be used to substitute the petroleum-derived phenol3-6. However, lignin-phenol-formaldehyde resin adhesives are less attractive to plywood manufacturers than urea-formaldehyde and phenol-formaldehyde resins owing to their appearance and cost. Here we report a simple and practical strategy for preparing lignin-based wood adhesives from lignocellulosic biomass. Our strategy involves separation of uncondensed or slightly condensed lignins from biomass followed by direct application of a suspension of the lignin and water as an adhesive on wood veneers. Plywood products with superior performances could be prepared with such lignin adhesives at a wide range of hot-pressing temperatures, enabling the use of these adhesives as promising alternatives to traditional wood adhesives in different market segments. Mechanistic studies indicate that the adhesion mechanism of such lignin adhesives may involve softening of lignin by water, filling of vessels with softened lignin and crosslinking of lignins in adhesives with those in the cell wall.

Catalytic conversion of diformylxylose to furfural in biphasic solvent systems.

Biobased furfural is a sustainable alternative to petrochemical intermediates for bulk chemicals and fuel production. However, existing methods for the conversion of xylose or lignocelluloses in mono-/bi-phasic systems to furfural involve non-selective sugar isolation or lignin condensation, limiting the valorisation of lignocelluloses. Herein, we used diformylxylose (DFX), a xylose derivative that is formed during the lignocellulosic fractionation process with formaldehyde protection, as a substitute for xylose to produce furfural in biphasic systems. Under kinetically optimized conditions, over 76 mol% of DFX could be converted to furfural in water-methyl isobutyl ketone system at a high reaction temperature with a short reaction time. Finally, isolation of xylan in eucalyptus wood as DFX with formaldehyde protection followed by converting DFX in a biphasic system gave a final furfural yield of 52 mol% (on the basis of xylan in wood), which was more than two times of that without formaldehyde. Combined with the value-added utilization of formaldehyde-protected lignin, this study would enable the full and efficient utilization of lignocellulosic biomass components and further improve the economics of the formaldehyde protection fractionation process.