Laboratory Techniques for Identifying Causes of Allergic Dermatitis.

This article reviews the laboratory's role in identifying causes of chemical-induced allergic dermatitis. Several topics will be discussed. Allergen hazard identification refers to testing of chemicals for their sensitization potential. Animal-based, in silico, in chemico, and in vitro tests have been developed to identify the skin sensitization hazard of potential chemical allergens, but only a few of these are accepted by regulatory agencies. Laboratory investigations have also evaluated the stability of several commercially available allergic contact dermatitis patch tests. Such studies are considered product testing and are usually conducted in analytical chemistry laboratories.

Isothiazolinone Detection in Dish Soap and Personal Care Products: Comparison of Lovibond Isothiazolinone Test Kit and Ultrahigh-Performance Liquid Chromatography-Tandem Mass Spectrometry.

BACKGROUND: Isothiazolinones are commonly used preservatives, which may cause allergic contact dermatitis. The Lovibond Isothiazolinone Test Kit (LITK) has been reported to successfully identify clinically relevant, occult isothiazolinones in patient personal care products. OBJECTIVE: The aim of the study was to analyze dish soaps and personal care products that do not declare isothiazolinones ("no-ISO") for the presence of isothiazolinones via 2 methods: LITK and ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). METHODS: No-ISO dish soaps (n = 9), a convenience sample of patient products (n = 6), and controls (positive [isothiazolinone declared], n = 5; negative, n = 2) were tested with LITK (X3) and UHPLC-MS/MS. RESULTS: Several no-ISO dish soaps and personal products were positive for isothiazolinones (LITK, n = 12; UHPLC-MS/MS, n = 3). Ultrahigh-performance liquid chromatography-tandem mass spectrometry specifically identified methylisothiazolinone alone in 1 no-ISO dish soap, methylchloroisothiazolinone in another, and both in a third. Using UHPLC-MS/MS as the criterion standard, we observed the accuracy of LITK for 9 dish soaps was poor (sensitivity, 66.7%; specificity, 20%) and very poor for 6 personal care products (sensitivity, 0%; specificity, 0%). CONCLUSIONS: Personal products may contain undeclared isothiazolinones. The current study found that LITK had poor accuracy for testing dish soap and personal care products. Clinicians should be aware of these factors when managing patients with contact allergy to isothiazolinones.

Formaldehyde Release From Predispersed Tattoo Inks: Analysis Using the Chromotropic Acid Method.

BACKGROUND: Allergic contact dermatitis to tattoo ink may last from weeks to years. Formaldehyde is a strong sensitizer that may be present in predispersed tattoo inks. OBJECTIVES: The aim of this study was to evaluate the presence of formaldehyde in predispersed tattoo inks using the chromotropic acid method. METHODS: Tattoo inks from 39 companies were evaluated. Inclusion criteria included availability to purchase inks online through US tattoo product wholesalers or individual Web sites. Brands were grouped based on prevalence of use: common, uncommon, or rare. For common brands, 8 colors (primary colors, secondary colors, black, and white) were purchased. For uncommon and rare brands, 5 colors (primary colors, black, and white) were purchased. Each ink was tested with standard chromotropic acid method procedures; concentration of formaldehyde released was quantified using spectrophotometry. RESULTS: In total, 127 tattoo inks were purchased and tested. Ninety-three (73%) tested positive for formaldehyde release; 34 (27%) tested negative. Formaldehyde release did not correlate with color or brand. At least 1 ink from all brands (except 1) was positive for formaldehyde release. CONCLUSION: Approximately three-quarters of selected US tattoo inks tested positive for formaldehyde release. Clinicians should be aware of tattoo ink as a potential source of formaldehyde.

Resolution of Pulmonary Inflammation Induced by Carbon Nanotubes and Fullerenes in Mice: Role of Macrophage Polarization.

Pulmonary exposure to certain engineered nanomaterials (ENMs) causes chronic lesions like fibrosis and cancer in animal models as a result of unresolved inflammation. Resolution of inflammation involves the time-dependent biosynthesis of lipid mediators (LMs)-in particular, specialized pro-resolving mediators (SPMs). To understand how ENM-induced pulmonary inflammation is resolved, we analyzed the inflammatory and pro-resolving responses to fibrogenic multi-walled carbon nanotubes (MWCNTs, Mitsui-7) and low-toxicity fullerenes (fullerene C60, C60F). Pharyngeal aspiration of MWCNTs at 40 µg/mouse or C60F at a dose above 640 µg/mouse elicited pulmonary effects in B6C3F1 mice. Both ENMs stimulated acute inflammation, predominated by neutrophils, in the lung at day 1, which transitioned to histiocytic inflammation by day 7. By day 28, the lesion in MWCNT-exposed mice progressed to fibrotic granulomas, whereas it remained as alveolar histiocytosis in C60F-exposed mice. Flow cytometric profiling of whole lung lavage (WLL) cells revealed that neutrophil recruitment was the greatest at day 1 and declined to 36.6% of that level in MWCNT- and 16.8% in C60F-treated mice by day 7, and to basal levels by day 28, suggesting a rapid initiation phase and an extended resolution phase. Both ENMs induced high levels of proinflammatory leukotriene B4 (LTB4) and prostaglandin E2 (PGE2) with peaks at day 1, and high levels of SPMs resolvin D1 (RvD1) and E1 (RvE1) with peaks at day 7. MWCNTs and C60F induced time-dependent polarization of M1 macrophages with a peak at day 1 and subsequently of M2 macrophages with a peak at day 7 in the lung, accompanied by elevated levels of type 1 or type 2 cytokines, respectively. M1 macrophages exhibited preferential induction of arachidonate 5-lipoxygenase activating protein (ALOX5AP), whereas M2 macrophages had a high level expression of arachidonate 15-lipoxygenase (ALOX15). Polarization of macrophages in vitro differentially induced ALOX5AP in M1 macrophages or ALOX15 in M2 macrophages resulting in increased preferential biosynthesis of proinflammatory LMs or SPMs. MWCNTs increased the M1- or M2-specific production of LMs accordingly. These findings support a mechanism by which persistent ENM-induced neutrophilic inflammation is actively resolved through time-dependent polarization of macrophages and enhanced biosynthesis of specialized LMs via distinct ALOX pathways.

Urushiol Compounds Detected in Toxicodendron-Labeled Consumer Products Using Mass Spectrometry.

BACKGROUND: Urushiol, the culprit allergen in Toxicodendron plants such as poison ivy, is an oily mixture of 15 and 17 carbon side chain alk-(en)-yl catechols. Recently, consumer products have been identified that contain Toxicodendron as an ingredient on their label; however, no studies have assessed whether urushiol is indeed present within these products. OBJECTIVE: The aim of the study was to determine whether urushiol compounds are present in consumer products labeled as containing Toxicodendron species. METHODS: Gas chromatography-mass spectrometry and liquid chromatography-tandem mass spectrometry were performed on 9 consumer products labeled as containing Toxicodendron species, including topical homeopathic remedies. Single ion monitoring gas chromatography-mass spectrometry was programmed in selective ion mode to detect 3-methylcatechol characteristic fragment ions of alk-(en)-yl catechols after silanization. Similarly, single ion monitoring liquid chromatography-tandem mass spectrometry was programmed to detect 4 urushiol pentadecylcatechols and 5 urushiol heptadecylcatechols using previously reported mass-to-charge ratios. RESULTS: Gas chromatography-mass spectrometry detected alk-(en)-yl catechols in 67% (6/9) of the products tested. Liquid chromatography-tandem mass spectrometry detected multiple urushiol pentadecylcatechols and heptadecylcatechols in 44% (4/9) of the products tested. CONCLUSIONS: Alk-(en)-yl catechols and multiple urushiols were detected in consumer products listing Toxicodendron species as an ingredient. Clinicians should be aware of these known allergenic ingredients in consumer products.

Chemical Identification and Confirmation of Contact Allergens.

Identification of the etiological chemical agent(s) associated with a case(s) of allergic contact dermatitis (ACD) is important for both patient management and public health surveillance. Traditional patch testing can identify chemical allergens to which the patient is allergic. Confirmation of allergen presence in the causative ACD-associated material is presently dependent on labeling information, which may not list the allergenic chemical on the product label or safety data sheet. Dermatologists have expressed concern over the lack of laboratory support for chemical allergen identification and possibly quantification from patients' ACD-associated products. The aim of this review was to provide the clinician a primer to better understand the analytical chemistry of contact allergen confirmation and unknown identification, including types of analyses, required instrumentation, identification levels of confidence decision tree, limitations, and costs.

Isothiazolinone Content of US Consumer Adhesives: Ultrahigh-Performance Liquid Chromatographic Mass Spectrometry Analysis.

BACKGROUND: There are limited data regarding the prevalence and concentration of isothiazolinone preservatives in consumer adhesives. OBJECTIVES: The aim of this study was to determine the prevalence and concentration of 5 specific isothiazolinones (methylisothiazolinone [MI], methylchloroisothiazolinone [MCI], benzisothiazolinone [BIT], butyl BIT, and octylisothiazolinone) in US adhesives. METHODS: Thirty-eight consumer adhesives were analyzed using ultrahigh-performance liquid chromatographic-mass spectrometry. Fisher exact tests were used to test for isothiazolinone content and: 1) glue format (2) application purpose and 3) extraction method. RESULTS: Nineteen adhesives (50%) had at least 1 isothiazolinone, and 15 contained 2 isothiazolinones. Frequencies and concentrations were as follows: MI (44.7%; 4-133 ppm), MCI (31.6%; 7-27 ppm), BIT (15.8%; 10-86 ppm), and octylisothiazolinone (2.6%; 1 ppm). Butyl BIT was not detected in any of the adhesives. Format (stick vs liquid) was not statistically associated with isothiazolinone presence. At least half of adhesives in the following application purposes had at least 1 isothiazolinone: shoe, craft, fabric, and school. All-purpose glues had a statistically significant lower concentration of MI and MCI, whereas craft glues were associated with higher concentrations of MI and MCI. Compared with other glues, fabric adhesives were associated with a higher risk of containing BIT. CONCLUSIONS: Half of the tested adhesives contained at least 1 isothiazolinone. Methylisothiazolinone and MCI were the most common. Consumers and dermatologists should be aware of adhesives as a source of isothiazolinones.

Undeclared formaldehyde levels in patient consumer products: formaldehyde test kit utility.

PURPOSE: Formaldehyde allergic contact dermatitis (ACD) may be due to products with free formaldehyde or formaldehyde-releasing agents; however, assessment of formaldehyde levels in such products is infrequently conducted. The present study quantifies total releasable formaldehyde from "in-use" products associated with formaldehyde ACD and tests the utility of commercially available formaldehyde spot test kits. MATERIALS AND METHODS: Personal care products from 2 patients with ACD to formaldehyde were initially screened at the clinic for formaldehyde using a formaldehyde spot test kit. Formaldehyde positive products were sent to the laboratory for confirmation by gas chromatography-mass spectrometry. In addition, 4 formaldehyde spot test kits were evaluated for potential utility in a clinical setting. RESULTS: Nine of the 10 formaldehyde spot test kit positive products obtained from formaldehyde allergic patients had formaldehyde with total releasable formaldehyde levels ranging from 5.4 to 269.4 µg/g. Of these, only two shampoos tested listed a formaldehyde-releasing agent in the ingredients or product literature. Subsequently, commercially available formaldehyde spot test kits were evaluated in the laboratory for ability to identify formaldehyde in personal care products. CONCLUSIONS: Chemical based formaldehyde spot test were more reliable than the enzymatic based test in identifying product releasable formaldehyde content. It is concluded that product labeled ingredient lists and available information are often inadequate to confirm the potential for formaldehyde exposure and chemical based spot test kits may have utility for identification of potential formaldehyde exposure from personal care products.

Circulating miRs-183-5p, -206-3p and -381-3p may serve as novel biomarkers for 4,4'-methylene diphenyl diisocyanate exposure.

BACKGROUND: Occupational exposure to the most widely used diisocyanate, 4,4'-methylene diphenyl diisocyanate (MDI), is a cause of occupational asthma (OA). Early recognition of MDI exposure and sensitization is essential for the prevention of MDI-OA. OBJECTIVE: Identify circulating microRNAs (miRs) as novel biomarkers for early detection of MDI exposure and prevention of MDI-OA. MATERIALS AND METHODS: Female BALB/c mice were exposed to one of three exposure regimens: dermal exposure to 1% MDI in acetone; nose-only exposure to 4580 ± 1497 µg/m3 MDI-aerosol for 60 minutes; or MDI dermal exposure/sensitization followed by MDI-aerosol inhalation challenge. Blood was collected and miRCURY™ miRs qPCR Profiling Service was used to profile circulate miRs from dermally exposed mice. Candidate miRs were identified and verified from mice exposed to three MDI-exposure regimens by TaqMan® miR assays. RESULTS: Up/down-regulation patterns of circulating mmu-miRs-183-5p, -206-3p and -381-3p were identified and verified. Circulating mmu-miR-183-5p was upregulated whereas mmu-miRs-206-3p and -381-3p were downregulated in mice exposed via all three MDI exposure regimens. DISCUSSION AND CONCLUSION: Upregulation of circulating miR-183-5p along with downregulation of circulating miRs-206-3p and -381-3p may serve as putative biomarkers of MDI exposure and may be considered as potential candidates for validation in exposed human worker populations.

Isothiazolinone in Residential Interior Wall Paint: A High-Performance Liquid Chromatographic-Mass Spectrometry Analysis.

BACKGROUND: There is limited information regarding isothiazolinone content in residential wall paints in the United States. OBJECTIVE: The aim of this study was to evaluate the prevalence of 5 isothiazolinones-methylisothiazolinone (MI), methylchloroisothiazolinone, benzisothiazolinone (BIT), butyl BIT, and octylisothiazolinone-in US residential wall paints. METHODS: Forty-seven paints were obtained from retailers in Minneapolis/St Paul, Minnesota. Paint samples were assessed for the presence of the 5 isothiazolinones using high-performance liquid chromatographic-mass spectrometry. RESULTS: At least 1 isothiazolinone was detected in all 47 paints. However, no paint contained butyl BIT, and only 1 paint had octylisothiazolinone. The MI and BIT were found in 96% and 94% of the paints, respectively. Methylisothiazolinone ranged in concentration from 17 to 358 ppm, whereas BIT varied from 29 to 1111 ppm. Methylchloroisothiazolinone was found solely in oil-based paints. Isothiazolinones were declared in 15% of Safety Data Sheets but did not correlate with high-performance liquid chromatographic-mass spectrometry. One "preservative-free" paint had BIT at 71.5 ppm. Paint sheen was not statistically associated with BIT or MI concentrations. Unpigmented paints and paints with volatile organic compound claims had significantly lower concentrations of MI, but not BIT. CONCLUSIONS: All paints contained at least 1 isothiazolinone. Methylisothiazolinone and BIT were the most common. Safety Data Sheets are insufficient for ascertaining isothiazolinone content in US paints.

Mass spectrometry-based analysis of murine bronchoalveolar lavage fluid following respiratory exposure to 4,4'-methylene diphenyl diisocyanate aerosol.

1. Diisocyanates are highly reactive electrophiles utilized in the manufacture of a wide range of polyurethane products and have been identified as causative agents of occupational allergic respiratory disease. However, in spite of the significant occupational health burden associated with diisocyanate-induced asthma, the mechanism of disease pathogenesis remains largely unknown. 2. To better understand the fate of inhaled diisocyanates, a nose-only aerosol exposure system was constructed and utilized to expose a BALB/c mouse model to an aerosol generated from 4,4'-methylene diphenyl diisocyanate (MDI). Tissue and bronchoalveolar lavage samples were evaluated 4 and 24 h post-exposure for evidence of diisocyanate-protein haptenation, and a label-free quantitative proteomics strategy was employed to evaluate relative changes to the protein content of the cellular fraction of the lavage fluid. 3. Following MDI aerosol exposure, expression of the number of proteins with immunological or xenobiotic metabolism relevance is increased, including endoplasmin, cytochrome P450 and argininosuccinate synthase. Western blot analysis indicated MDI-conjugated protein in the lavage fluid, which was identified as serum albumin. 4. Tandem mass spectrometry analysis of MDI-albumin revealed MDI conjugation occurs at a dilysine motif at Lys525, as well as at a glutamine-lysine motif at Lys414, in good agreement with previously published in vitro data on diisocyanate-conjugated serum albumin.

Vapor Pressure and Predicted Stability of American Contact Dermatitis Society Core Allergens.

BACKGROUND: Accurate patch testing is reliant on proper preparation of patch test allergens. The stability of patch test allergens is dependent on several factors including vapor pressure (VP). OBJECTIVE: This investigation reviews the VP of American Contact Dermatitis Society Core Allergens and compares stability predictions based on VP with those established through clinical testing. METHODS: Standard references were accessed for determining VP in millimeters of mercury and associated temperature in degrees celsius. If multiple values were listed, VP at temperatures that most approximate indoor storage conditions (20°C and 25°C) were chosen. For mixes, the individual component with the highest VP was chosen as the overall VP, assuming that the most volatile substance would evaporate first. Antigens were grouped into low (≤0.001 mm Hg), moderate (<1 to >0.001 mm Hg), and high (≥1 mm Hg) volatility using arbitrary cutoff values. CONCLUSIONS: This review is consistent with previously reported data on formaldehyde, acrylates, and fragrance material instability. Given lack of testing data, VP can be useful in predicting patch test compound stability. Measures such as air-tight multidose reagent containers, sealed single-application dispensers, preparation of patches immediately before application, and storage at lower temperatures may remedy some of these issues.

The influence of diisocyanate antigen preparation methodology on monoclonal and serum antibody recognition.

Exposure to diisocyanates (dNCOs), such as methylene diphenyl diisocyanate (MDI) can cause occupational asthma (OA). Currently, lab tests for dNCO specific IgE are specific, but not sensitive, which limits their utility in diagnosing dNCO asthma. This may be due to variable preparation and poor characterization of the standard antigens utilized in these assays. The aim of this study was to produce and characterize a panel of antigens prepared using three different commonly employed methods and one novel method. The conjugates were examined for recognition by anti-MDI monoclonal antibodies (mAbs) in varying enzyme linked immunosorbant assay (ELISA) formats, extent of crosslinking, total amount of MDI, the sites of MDI conjugation, relative shape/charge, and reactivity with human serum with antibodies from sensitized, exposed workers. Results indicate that while there are minimal differences in the total amount of MDI conjugated, the extent of crosslinking, and the conjugation sites, there are significant differences in the recognition of differently prepared conjugates by mAbs. Native and denaturing polyacrylamide gel electrophoresis demonstrate differences in the mobility of different conjugates, indicative of structural changes that are likely important for antigenicity. While mAbs exhibited differential binding to different conjugates, polyclonal serum antibodies from MDI exposed workers exhibited equivalent binding to different conjugates by ELISA. While differences in the recognition of the different conjugates exist by mAb detection, differences in antigenicity could not be detected using human serum from MDI-sensitized individuals. Thus, although dNCO conjugate preparation can, depending on the immunoassay platform, influence binding of specific antibody clones, serologic detection of the dNCO-exposure-induced polyclonal antibody response may be less sensitive to these differences.

Characterization and comparative analysis of 2,4-toluene diisocyanate and 1,6-hexamethylene diisocyanate haptenated human serum albumin and hemoglobin.

Diisocyanates (dNCOs) are low molecular weight chemical sensitizers that react with autologous proteins to produce neoantigens. dNCO-haptenated proteins have been used as immunogens for generation of dNCO-specific antibodies and as antigens to screen for dNCO-specific antibodies in exposed individuals. Detection of dNCO-specific antibodies in exposed individuals for diagnosis of dNCO asthma has been hampered by poor sensitivities of the assay methods in that specific IgE can only be detected in approximately 25% of the dNCO asthmatics. Apart from characterization of the conjugates used for these immunoassays, the choice of the carrier protein and the dNCO used are important parameters that can influence the detection of dNCO-specific antibodies. Human serum albumin (HSA) is the most common carrier protein used for detection of dNCO specific-IgE and -IgG but the immunogenicity and/or antigenicity of other proteins that may be modified by dNCO in vivo is not well documented. In the current study, 2,4-toluene diisocyanate (TDI) and 1,6-hexamethylene diisocyanate (HDI) were reacted with HSA and human hemoglobin (Hb) and the resultant adducts were characterized by (i) HPLC quantification of the diamine produced from acid hydrolysis of the adducts, (ii) 2,4,6-trinitrobenzene sulfonic acid (TNBS) assay to assess extent of cross-linking, (iii) electrophoretic migration in polyacrylamide gels to analyze intra- and inter-molecular cross-linking, and (iv) evaluation of antigenicity using a monoclonal antibody developed previously to TDI conjugated to Keyhole limpet hemocyanin (KLH). Concentration-dependent increases in the amount of dNCO bound to HDI and TDI, cross-linking, migration in gels, and antibody-binding were observed. TDI reactivity with both HSA and Hb was significantly higher than HDI. Hb-TDI antigenicity was approximately 30% that of HSA-TDI. In conclusion, this data suggests that both, the extent of haptenation as well as the degree of cross-linking differs between the two diisocyanate species studied, which may influence their relative immunogenicity and/or antigenicity.

Reactivity measurement in estimation of benzoquinone and benzoquinone derivatives' allergenicity.

Benzoquinone (BQ) and benzoquinone derivatives (BQD) are used in the production of dyes and cosmetics. While BQ, an extreme skin sensitizer, is an electrophile known to covalently modify proteins via Michael Addition (MA) reaction whilst halogen substituted BQD undergo nucleophilic vinylic substitution (SNV) mechanism onto amine and thiol moieties on proteins, the allergenic effects of adding substituents on BQ have not been reported. The effects of inserting substituents on the BQ ring has not been studied in animal assays. However, mandated reduction/elimination of animals used in cosmetics testing in Europe has led to an increased need for alternatives for the prediction of skin sensitization potential. Electron withdrawing and electron donating substituents on BQ were assessed for effects on BQ reactivity toward nitrobenzene thiol (NBT). The NBT binding studies demonstrated that addition of EWG to BQ as exemplified by the chlorine substituted BQDs increased reactivity while addition of EDG as in the methyl substituted BQDs reduced reactivity. BQ and BQD skin allerginicity was evaluated in the murine local lymph node assay (LLNA). BQD with electron withdrawing groups had the highest chemical potency followed by unsubstituted BQ and the least potent were the BQD with electron donating groups. The BQD results demonstrate the impact of inductive effects on both BQ reactivity and allergenicity, and suggest the potential utility of chemical reactivity data for electrophilic allergen identification and potency ranking.

Arterial stiffness, oxidative stress, and smoke exposure in wildland firefighters.

OBJECTIVES: To assess the association between exposure, oxidative stress, symptoms, and cardiorespiratory function in wildland firefighters. METHODS: We studied two Interagency Hotshot Crews with questionnaires, pulse wave analysis for arterial stiffness, spirometry, urinary 8-iso-prostaglandin F2α (8-isoprostane) and 8-hydroxy-2'-deoxyguanosine (8-OHdG), and the smoke exposure marker (urinary levoglucosan). Arterial stiffness was assessed by examining levels of the aortic augmentation index, expressed as a percentage. An oxidative stress score comprising the average of z-scores created for 8-OHdG and 8-isoprostane was calculated. RESULTS: Mean augmentation index % was higher for participants with higher oxidative stress scores after adjusting for smoking status. Specifically for every one unit increase in oxidative stress score the augmentation index % increased 10.5% (95% CI: 2.5, 18.5%). Higher mean lower respiratory symptom score was associated with lower percent predicted forced expiratory volume in one second/forced vital capacity. CONCLUSIONS: Biomarkers of oxidative stress may serve as indicators of arterial stiffness in wildland firefighters.

Toluene diisocyanate (TDI) disposition and co-localization of immune cells in hair follicles.

Diisocyanates (dNCOs) are potent chemical allergens utilized in various industries. It has been proposed that skin exposure to dNCOs produces immune sensitization leading to work-related asthma and allergic disease. We examined dNCOs sensitization by using a dermal murine model of toluene diisocyanate (TDI) exposure to characterize the disposition of TDI in the skin, identify the predominant haptenated proteins, and discern the associated antigen uptake by dendritic cells. Ears of BALB/c mice were dosed once with TDI (0.1% or 4% v/v acetone). Ears and draining lymph nodes (DLNs) were excised at selected time points between 1 h and 15 days post-exposure and were processed for histological, immunohistochemical, and proteomic analyses. Monoclonal antibodies specific for TDI-haptenated protein (TDI-hp) and antibodies to various cell markers were utilized with confocal microscopy to determine co-localization patterns. Histopathological changes were observed following exposure in ear tissue of mice dosed with 4% TDI/acetone. Immunohistochemical staining demonstrated TDI-hp localization in the stratum corneum, hair follicles, and sebaceous glands. TDI-hp were co-localized with CD11b(+) (integrin αM/Mac-1), CD207(+) (langerin), and CD103(+) (integrin αE) cells in the hair follicles and in sebaceous glands. TDI-hp were also identified in the DLN 1 h post-exposure. Cytoskeletal and cuticular keratins along with mouse serum albumin were identified as major haptenated species in the skin. The results of this study demonstrate that the stratum corneum, hair follicles, and associated sebaceous glands in mice are dendritic cell accessible reservoirs for TDI-hp and thus identify a mechanism for immune recognition following epicutaneous exposure to TDI.

Concentrations and stability of methyl methacrylate, glutaraldehyde, formaldehyde and nickel sulfate in commercial patch test allergen preparations.

BACKGROUND: Epicutaneous patch tests are used to reproduce allergy and diagnose allergic contact dermatitis. Reliable allergen test preparations are required. OBJECTIVES: The purpose of the present study was to measure the actual concentrations of nickel(II) sulfate hexahydrate (NiSO4 ), methyl methacrylate, formaldehyde, and glutaraldehyde, and to compare them with the labelled concentrations, in commercial patch test allergen preparations found in dermatology clinics where patch testing is routinely performed. MATERIALS AND METHODS: The commercial in-date and out-of-date patch test allergen preparations concentrations of NiSO4 , methyl methacrylate, formaldehyde and glutaraldehyde from one to three participating clinics were analysed with chromatographic or wet chemical techniques. RESULTS: NiSO4 and formaldehyde concentrations were at or above the labelled concentrations; however, formaldehyde loss occurred with storage. NiSO4 particulate was uniformly distributed throughout the petrolatum. 'In-use' methyl methacrylate reagent syringes all contained ≤ 56% of the 2% label concentration, with no observable relationship with expiration date. Lower methyl methacrylate cocentrations were consistently measured at the syringe tip end, suggesting loss resulting from methyl methacrylate's volatility. The concentrations of glutaraldehyde patch test allergen preparations ranged from 27% to 45% of the labelled (1% in pet.) concentration, independently of expiration date. CONCLUSIONS: Some false-negative methyl methacrylate, formaldehyde or glutaraldehyde patch test results may be attributable to instability of the test preparations.

Exposures and cross-shift lung function declines in wildland firefighters.

Respiratory problems are common among wildland firefighters. However, there are few studies directly linking occupational exposures to respiratory effects in this population. Our objective was to characterize wildland fire fighting occupational exposures and assess their associations with cross-shift changes in lung function. We studied 17 members of the Alpine Interagency Hotshot Crew with environmental sampling and pulmonary function testing during a large wildfire. We characterized particles by examining size distribution and mass concentration, and conducting elemental and morphological analyses. We examined associations between cross-shift lung function change and various analytes, including levoglucosan, an indicator of wood smoke from burning biomass. The levoglucosan component of the wildfire aerosol showed a predominantly bimodal size distribution: a coarse particle mode with a mass median aerodynamic diameter about 12 µm and a fine particle mode with a mass median aerodynamic diameter < 0.5 µm. Levoglucosan was found mainly in the respirable fraction and its concentration was higher for fire line construction operations than for mop-up operations. Larger cross-shift declines in forced expiratory volume in one second were associated with exposure to higher concentrations of respirable levoglucosan (p < 0.05). Paired analyses of real-time personal air sampling measurements indicated that higher carbon monoxide (CO) concentrations were correlated with higher particulate concentrations when examined by mean values, but not by individual data points. However, low CO concentrations did not provide reliable assurance of concomitantly low particulate concentrations. We conclude that inhalation of fine smoke particles is associated with acute lung function decline in some wildland firefighters. Based on short-term findings, it appears important to address possible long-term respiratory health issues for wildland firefighters. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resources: a file containing additional information on historical studies of wildland fire exposures, a file containing the daily-exposure-severity questionnaire completed by wildland firefighter participants at the end of each day, and a file containing additional details of the investigation of correlations between carbon monoxide concentrations and other measured exposure factors in the current study.].