Black carbon and particle lung-deposited surface area in residential wood combustion emissions: Effects of an electrostatic precipitator and photochemical aging.

Residential wood combustion (RWC) remains a significant global source of particulate matter (PM) emissions with adverse impacts on regional air quality, climate, and human health. The lung-deposited surface area (LDSA) and equivalent black carbon (eBC) concentrations have emerged as important metrics to assess particulate pollution. In this study we estimated combustion phase-dependent emission factors of LDSA for alveolar, tracheobronchial, and head-airway regions of human lungs and explored the relationships between eBC and LDSA in fresh and photochemically aged RWC emissions. Photochemical aging was simulated in an oxidative flow reactor at OH• exposures equivalent to 1.4 or 3.4 days in the atmosphere. Further, the efficiency of a small-scale electrostatic precipitator (ESP) for reducing LDSA and eBC from the wood stove was determined. For fresh emission eBC correlated extremely well with LDSA, but the correlation decreased after aging. Soot-dominated flaming phase showed the highest eBC dependency of LDSA whereas for ignition and char burning phases non-BC particles contributed strongly the LDSA. Deposition to the alveolar region contributed around 60 % of the total lung-deposition. The ESP was found as an effective method to mitigate particulate mass, LDSA, as well as eBC emissions from wood stoves, as they were reduced on average by 72%, 71%, and 69%, respectively. The reduction efficiencies, however, consistently dropped over the span of an experiment, especially for eBC. Further, the ESP was found to increase the sub-30 nm ultrafine particle number emissions, with implications for LDSA. The results of this study can be used for assessing the contribution of RWC to LDSA concentrations in ambient air.

Effect of fuel zinc content on toxicological responses of particulate matter from pellet combustion in vitro.

Significant amounts of transition metals such as zinc, cadmium and copper can become enriched in the fine particle fraction during biomass combustion with Zn being one of the most abundant transition metals in wood combustion. These metals may have an important role in the toxicological properties of particulate matter (PM). Indeed, many epidemiological studies have found associations between mortality and PM Zn content. The role of Zn toxicity on combustion PM was investigated. Pellets enriched with 170, 480 and 2300 mg Zn/kg of fuel were manufactured. Emission samples were generated using a pellet boiler and the four types of PM samples; native, Zn-low, Zn-medium and Zn-high were collected with an impactor from diluted flue gas. The RAW 264.7 macrophage cell line was exposed for 24h to different doses (15, 50,150 and 300 µg ml(-1)) of the emission samples to investigate their ability to cause cytotoxicity, to generate reactive oxygen species (ROS), to altering the cell cycle and to trigger genotoxicity as well as to promote inflammation. Zn enriched pellets combusted in a pellet boiler produced emission PM containing ZnO. Even the Zn-low sample caused extensive cell cycle arrest and there was massive cell death of RAW 264.7 macrophages at the two highest PM doses. Moreover, only the Zn-enriched emission samples induced a dose dependent ROS response in the exposed cells. Inflammatory responses were at a low level but macrophage inflammatory protein 2 reached a statistically significant level after exposure of RAW 264.7 macrophages to ZnO containing emission particles. ZnO content of the samples was associated with significant toxicity in almost all measured endpoints. Thus, ZnO may be a key component producing toxicological responses in the PM emissions from efficient wood combustion. Zn as well as the other transition metals, may contribute a significant amount to the ROS responses evoked by ambient PM.

Particle emissions from a marine engine: chemical composition and aromatic emission profiles under various operating conditions.

The chemical composition of particulate matter (PM) emissions from a medium-speed four-stroke marine engine, operated on both heavy fuel oil (HFO) and distillate fuel (DF), was studied under various operating conditions. PM emission factors for organic matter, elemental carbon (soot), inorganic species and a variety of organic compounds were determined. In addition, the molecular composition of aromatic organic matter was analyzed using a novel coupling of a thermal-optical carbon analyzer with a resonance-enhanced multiphoton ionization (REMPI) mass spectrometer. The polycyclic aromatic hydrocarbons (PAHs) were predominantly present in an alkylated form, and the composition of the aromatic organic matter in emissions clearly resembled that of fuel. The emissions of species known to be hazardous to health (PAH, Oxy-PAH, N-PAH, transition metals) were significantly higher from HFO than from DF operation, at all engine loads. In contrast, DF usage generated higher elemental carbon emissions than HFO at typical load points (50% and 75%) for marine operation. Thus, according to this study, the sulfur emission regulations that force the usage of low-sulfur distillate fuels will also substantially decrease the emissions of currently unregulated hazardous species. However, the emissions of soot may even increase if the fuel injection system is optimized for HFO operation.

Effects of a catalytic converter on PCDD/F, chlorophenol and PAH emissions in residential wood combustion.

Catalytic converters can be used to decrease carbon monoxide, organic compounds and soot from small-scale wood-fired appliances. The reduction is based on the oxidation of gaseous and particulate pollutants promoted by catalytic transition metal surfaces. However, many transition metals have also strong catalytic effect on PCDD/F formation. In this study birch logs were burned in a wood-fired stove (18 kW) with and without a catalytic converter with palladium and platinum as catalysts. PCDD/F, chlorophenol and PAH concentrations were analyzed from three phases of combustion (ignition, pyrolysis and burnout) and from the whole combustion cycle. PCDD/F emissions without the catalytic converter were at a level previously measured for wood combustion (0.15-0.74 ng N m(-3)). PAH emissions without the catalytic converter were high (47-85 mg N m(-3)) which is typical for batch combustion of wood logs. Total PAH concentrations were lower (on average 0.8-fold), and chlorophenol and PCDD/F levels were substantially higher (4.3-fold and 8.7-fold, respectively) when the catalytic converter was used. Increase in the chlorophenol and PCDD/F concentrations was most likely due to the catalytic effect of the platinum and palladium. Platinum and palladium may catalyze chlorination of PCDD/Fs via the Deacon reaction or an oxidation process. The influence of emissions from wood combustion to human health and the environment is a sum of effects caused by different compounds formed in the combustion. Therefore, the usage of platinum and palladium based catalytic converters to reduce emissions from residential wood combustion should be critically evaluated before wide-range utilization of the technology.