Immobilization and Release of Platelet-Rich Plasma from Modified Nanofibers Studied by Advanced X-ray Photoelectron Spectroscopy Analyses.

Platelet-rich Plasma (PRP) is an ensemble of growth factors, extracellular matrix components, and proteoglycans that are naturally balanced in the human body. In this study, the immobilization and release of PRP component nanofiber surfaces modified by plasma treatment in a gas discharge have been investigated for the first time. The plasma-treated polycaprolactone (PCL) nanofibers were utilized as substrates for the immobilization of PRP, and the amount of PRP immobilized was assessed by fitting a specific X-ray Photoelectron Spectroscopy (XPS) curve to the elemental composition changes. The release of PRP was then revealed by measuring the XPS after soaking nanofibers containing immobilized PRP in buffers of varying pHs (4.8; 7.4; 8.1). Our investigations have proven that the immobilized PRP would continue to cover approximately fifty percent of the surface after eight days.

Ag-Contained Superabsorbent Curdlan-Chitosan Foams for Healing Wounds in a Type-2 Diabetic Mice Model.

This study focused on the synthesis and characterization of pure curdlan-chitosan foams (CUR/CS), as well as foams containing Ag nanoparticles (CUR/CS/Ag), and their effect on the skin repair of diabetic mice (II type). The layer of antibacterial superabsorbent foam provides good oxygenation, prevents bacterial infection, and absorbs exudate, forming a soft gel (moist environment). These foams were prepared from a mixture of hydrolyzed curdlan and chitosan by lyophilization. To enhance the antibacterial properties, an AgNO3 solution was added to the curdlan/chitosan mixture during the polymerization and was then reduced by UV irradiation. The membranes were further investigated for their structure and composition using optical microscopy, scanning electron microscopy, energy-dispersive spectroscopy, FT-IR spectroscopy, and XPS analysis and modeling. In vivo tests demonstrated that CUR/CS/Ag significantly boosted the regeneration process compared with pure CUR/CS and the untreated control.

Biodegradable Nanohybrid Materials as Candidates for Self-Sanitizing Filters Aimed at Protection from SARS-CoV-2 in Public Areas.

The COVID-19 pandemic has raised the problem of efficient, low-cost materials enabling the effective protection of people from viruses transmitted through the air or via surfaces. Nanofibers can be a great candidate for efficient air filtration due to their structure, although they cannot protect from viruses. In this work, we prepared a wide range of nanofibrous biodegradable samples containing Ag (up to 0.6 at.%) and Cu (up to 20.4 at.%) exhibiting various wettability. By adjusting the magnetron current (0.3 A) and implanter voltage (5 kV), the deposition of TiO2 and Ag+ implantation into PCL/PEO nanofibers was optimized in order to achieve implantation of Ag+ without damaging the nanofibrous structure of the PCL/PEO. The optimal conditions to implant silver were achieved for the PCL-Ti0.3-Ag-5kV sample. The coating of PCL nanofibers by a Cu layer was successfully realized by magnetron sputtering. The antiviral activity evaluated by widely used methodology involving the cultivation of VeroE6 cells was the highest for PCL-Cu and PCL-COOH, where the VeroE6 viability was 73.1 and 68.1%, respectively, which is significantly higher compared to SARS-CoV-2 samples without self-sanitizing (42.8%). Interestingly, the samples with implanted silver and TiO2 exhibited no antiviral effect. This difference between Cu and Ag containing nanofibers might be related to the different concentrations of ions released from the samples: 80 µg/L/day for Cu2+ versus 15 µg/L/day for Ag+. The high antiviral activity of PCL-Cu opens up an exciting opportunity to prepare low-cost self-sanitizing surfaces for anti-SARS-CoV-2 protection and can be essential for air filtration application and facemasks. The rough cost estimation for the production of a biodegradable nanohybrid PCL-Cu facemask revealed ~$0.28/piece, and the business case for the production of these facemasks would be highly positive, with an Internal Rate of Return of 34%.

Electrospun Biodegradable Nanofibers Coated Homogenously by Cu Magnetron Sputtering Exhibit Fast Ion Release. Computational and Experimental Study.

Copper-coated nanofibrous materials are desirable for catalysis, electrochemistry, sensing, and biomedical use. The preparation of copper or copper-coated nanofibers can be pretty challenging, requiring many chemical steps that we eliminated in our robust approach, where for the first time, Cu was deposited by magnetron sputtering onto temperature-sensitive polymer nanofibers. For the first time, the large-scale modeling of PCL films irradiation by molecular dynamics simulation was performed and allowed to predict the ions penetration depth and tune the deposition conditions. The Cu-coated polycaprolactone (PCL) nanofibers were thoroughly characterized and tested as antibacterial agents for various Gram-positive and Gram-negative bacteria. Fast release of Cu2+ ions (concentration up to 3.4 µg/mL) led to significant suppression of E. coli and S. aureus colonies but was insufficient against S. typhimurium and Ps. aeruginosa. The effect of Cu layer oxidation upon contact with liquid media was investigated by X-ray photoelectron spectroscopy revealing that, after two hours, 55% of Cu atoms are in form of CuO or Cu(OH)2. The Cu-coated nanofibers will be great candidates for wound dressings thanks to an interesting synergistic effect: on the one hand, the rapid release of copper ions kills bacteria, while on the other hand, it stimulates the regeneration with the activation of immune cells. Indeed, copper ions are necessary for the bacteriostatic action of cells of the immune system. The reactive CO2/C2H4 plasma polymers deposited onto PCL-Cu nanofibers can be applied to grafting of viable proteins, peptides, or drugs, and it further explores the versatility of developed nanofibers for biomedical applications use.

Transition metal hexacyanoferrates in electrocatalysis of H2O2 reduction: an exclusive property of Prussian Blue.

The ability of Prussian Blue, ferric hexacyanoferrate (FeHCF), to sensitively and selectively detect hydrogen peroxide by its reduction in the presence of oxygen is of high importance for analytical chemistry. Success with Prussian Blue (PB) provided an appearance of contradictory reports concerning electrocatalysis of the other transition metal hexacyanoferrates (HCFs) in H2O2 reduction. Investigating thermodynamics of the catalyzed reactions as well as electrochemical properties of the hexacyanoferrates, we are able to conclude that the noniron hexacyanoferrates themselves are completely electrocatalytically inactive, except for a minor electrocatalysis in the opposite reaction, hydrogen peroxide oxidation, registered for NiHCF. Concerning the most important reaction, H2O2 reduction, the observed electrocatalytic activity (by the way, 100 times decreased compared to PB) is due to the presence of FeHCF (Prussian Blue) as defects in the structure of noniron hexacyanoferrates. This finding, considering other unique properties of transition metal HCFs, will provide a systematic search for sensing materials with improved analytical performance characteristics.

Superstable advanced hydrogen peroxide transducer based on transition metal hexacyanoferrates.

We report on a superstable hydrogen peroxide (H(2)O(2)) transducer made by sequential deposition of the iron- and nickel-hexacyanoferrate (NiHCF) layers. Both chemical and mechanical stability of the latter, as well as similarity of its structure to Prussian Blue (PB) provide a substantial stabilization of the most advantageous H(2)O(2) transducer. The electrochemically deposited five bilayers of PB-NiHCF exhibit a complete stability under the continuous wall-jet flow of 1 mM of H(2)O(2) during more than 2 h, maintaining current at a level of 0.2 mA cm(-2), whereas common Prussian Blue loses half of its response within the first 20-25 min. Even being deposited in the open circuit regime on screen-printed electrodes, PB-NiHCF bilayers dramatically improve tolerance of the resulting transducer to alkaline solutions and iron ligands. Despite their 2-2.5 times decreased sensitivity (compared to common Prussian Blue), the sequentially deposited bilayers of PB-NiHCF provide a similar dynamic range of the transducer due to the decreased noise level.