RESUMEN
The main theme of this work is to study the influence of ion-exchangeable alkali metal cations, such as: Li(+), Na(+), K(+), and Cs(+) on the thermal, mechanical and morphological properties. In this regard, a set of rectorite/chitosan (REC-CS) bio-nanocomposite films (BNCFs) was prepared by facile reaction of chitosan with ion-exchanged REC clay. The microstructure and morphology of BNCFs were investigated with XRD, TEM, SEM and AFM. Thermal and tensile properties of BNCFs were also investigated. As revealed from TEM and XRD results, the BNCFs featured a mixed morphology. Some intercalated clay sheets, together with nano-sized clay tactoids were obtained in LiREC/CS, NaREC/CS and KREC/CS of the BNCFs. From fractured surface study, via SEM, it was observed that the dispersion of chitosan polymer attaches to (and covers) the clay platelets. FTIR confirmed strong hydrogen bonds between clay and chitosan polymer. In addition, the thermal stabilities significantly varied when alkali metal cations varied from Li(+) to Cs(+). The BNCFs featured high tensile strengths (up to 84 MPa) and tensile moduli (up to 45 GPa). After evaluating these properties of BNCFs, we came to conclusion that these bio-nano composites can be used for packaging applications.
Asunto(s)
Silicatos de Aluminio/química , Cationes/química , Quitosano/química , Metales Alcalinos/química , Minerales/química , Polímeros/química , Arcilla , Enlace de Hidrógeno , Microscopía Electrónica de Rastreo , Nanocompuestos/química , Propiedades de Superficie , Resistencia a la TracciónRESUMEN
Zinc oxide (ZnO) powder was investigated in terms of its use as filler in order to improve the inherent properties of PLA. Biocomposite films of PLA with different loadings of ZnO were prepared by solution casting method. Morphological analyses using SEM and POM showed that the ZnO particles were well dispersed at low ZnO loading, with starfish-like morphology. However, ZnO agglomeration was found at higher ZnO loadings. Tensile testing showed improvements in strength and a moderate improvement in toughness at 2 wt% ZnO loading. This is consistent with the homogeneous dispersion of ZnO particles in the PLA matrix. ZnO particles incorporation improved the thermal stability of PLA. In summary, ZnO particles were shown to have the potential as a toughener in the preparation of biocomposites with better integrity, although other approaches, such as the use of compatibilizer in the surface modification of ZnO will be needed for the concurrent improvement of PLA properties.
Asunto(s)
Materiales Biocompatibles/química , Poliésteres/química , Ensayo de Materiales , Fenómenos Mecánicos , Microscopía Electrónica de Rastreo , Termogravimetría , Difracción de Rayos X , Óxido de Zinc/químicaRESUMEN
The present scientific research resulted in the development of novel microbial resistant inorganic nanocomposite hydrogels, which can be used as antibacterial agents. They are promising candidates for advanced antimicrobial applications in the field of biomedical science. Novel inorganic nanocomposite hydrogels were developed from Carbopol® 980 NF and acrylamide. Dual-metallic (Ag0-Au0) nanoparticles were prepared (via a green process) by the nucleation of silver and gold salts with mint leaf extract to form a hydrogel network. The Carbopol nanocomposite hydrogels contain (Ag0-Au0) nanoparticles â¼5 ± 3 nm in size, which was confirmed by transmission electron microscopy. The developed hydrogels were characterized using Fourier transform infrared (FTIR) spectroscopy, thermo-gravimetric analysis (TGA), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) and transmission electron microscopy (TEM). The pure and inorganic nanocomposite hydrogels developed were tested against Bacillus and E. coli, for their antibacterial properties. The results indicate that the inorganic nanocomposites show significantly greater antimicrobial activity than the pure hydrogels. Therefore, novel microbial resistant Carbopol nanocomposite hydrogels can be used as potential candidates for antibacterial applications.