RESUMEN
Using a high-purity Germanium gamma-ray energy spectroscopic detector system, time-stamped list-mode data sets were acquired during axial scanning of 19 boiling water reactor (BWR) and 28 pressurized water reactor (PWR) type of nuclear fuel assemblies. The data sets were collected during two measurements campaigns in September 2016 and March 2019 at the Central Interim Storage Facility for Spent Nuclear (Clab) in Sweden. A certified calibration source of 137Cs was positioned along the central line of sight between the measured fuel assembly and the detector. Data sets from measurements with only the calibration source and other background sources, i.e. without a nuclear fuel assembly present, are also included. The list-mode structure of the measured data allows for an axially-resolved as well as energy-spectral resolved intensity of nuclide-specific gamma lines emitted from the spent nuclear fuel. Data presented here can be used e.g. for validation of gamma-ray transport simulation tools or for development of methods to estimate parameters of the spent nuclear fuel based on data from gamma-ray spectroscopy.
RESUMEN
Raw data from calorimetric measurements of five nuclear fuel assemblies of the PWR 17 × 17 type are provided. Measurements of the temperature both inside a calorimeter, in which the fuel assembly was placed, as well as outside, were performed as a function of time while water circulating inside the calorimeter heats up from radiation emitted in the radioactive decay of material in the fuel assembly. The data contain also measurements of dose rate in the water outside the calorimeter. Data from 38 measurements using an electrically heated model of a fuel assembly are also provided to be used for, e.g., calibration. The data can be used for validation of computer codes for modelling of nuclear systems, e.g. nuclear reactors, storage and transport of nuclear fuel or systems for geological disposal.