Forest top canopy bacterial communities are influenced by elevation and host tree traits.

BACKGROUND: The phyllosphere microbiome is crucial for plant health and ecosystem functioning. While host species play a determining role in shaping the phyllosphere microbiome, host trees of the same species that are subjected to different environmental conditions can still exhibit large degrees of variation in their microbiome diversity and composition. Whether these intra-specific variations in phyllosphere microbiome diversity and composition can be observed over the broader expanse of forest landscapes remains unclear. In this study, we aim to assess the variation in the top canopy phyllosphere bacterial communities between and within host tree species in the temperate European forests, focusing on Fagus sylvatica (European beech) and Picea abies (Norway spruce). RESULTS: We profiled the bacterial diversity, composition, driving factors, and discriminant taxa in the top canopy phyllosphere of 211 trees in two temperate forests, Veluwe National Parks, the Netherlands and Bavarian Forest National Park, Germany. We found the bacterial communities were primarily shaped by host species, and large variation existed within beech and spruce. While we showed that there was a core microbiome in all tree species examined, community composition varied with elevation, tree diameter at breast height, and leaf-specific traits (e.g., chlorophyll and P content). These driving factors of bacterial community composition also correlated with the relative abundance of specific bacterial families. CONCLUSIONS: While our results underscored the importance of host species, we demonstrated a substantial range of variation in phyllosphere bacterial diversity and composition within a host species. Drivers of these variations have implications at both the individual host tree level, where the bacterial communities differed based on tree traits, and at the broader forest landscape level, where drivers like certain highly plastic leaf traits can potentially link forest canopy bacterial community variations to forest ecosystem processes. We eventually showed close associations between forest canopy phyllosphere bacterial communities and host trees exist, and the consistent patterns emerging from these associations are critical for host plant functioning.

High-throughput Soxhlet extraction method applied for analysis of leaf lignocellulose and non-structural substances.

The traditional Soxhlet extraction method is commonly employed to extract soluble components from non-soluble components in a solid matrix, for example, non-structural substances in biomass samples that can be separated from structural lignocellulosic compounds in biomass samples. Conventional laboratory procedures for such extractions typically involve a low sample throughput, with each run being performed individually, resulting in time-consuming and labour-intensive processes, making them impractical for analysing large sample sets. In research fields such as Earth Observation in Forest Ecosystems, extensive fieldwork sampling is required across large study areas, resulting in a substantial number of leaf samples, each with limited mass. In this study, an innovative adaptation of the conventional National Renewable Energy Laboratory (NREL) Soxhlet method is developed to create a high-throughput mini-Soxhlet apparatus that enables the simultaneous extraction of up to nineteen samples, each with a mass of 0.3 g per sample. With this adaptation, we measured the lignocellulose and extractive in 343 leaf samples collected from four temperate forest tree species. This modified approach enhances versatility and can be applied to all solid-liquid extractions and various types of vegetation tissues, such as tree leaves, shrubs, crops, feedstock, and other non-woody samples.•The solid-liquid extraction method has been implemented in a heating block facilitating 19 small flasks to measure multiple samples simultaneously while requiring only a small sample mass.•The apparatus set-up was constructed using an alumina heating block mounted on a standard laboratory heating plate. Boiling flask tubes were placed in the heating block and equipped with condenser caps and filters on glass rods on which the solid samples were placed.•The adjustments made the method suitable for application to diverse vegetation tissues and non-woody sample types. It holds particular appeal for research areas that necessitate a high sample number.

Habitat visibility affects the behavioral response of a large herbivore to human disturbance in forest landscapes.

Wildlife can perceive humans as predators and human disturbance, whether lethal (e.g., hunting) or non-lethal (e.g., hiking, biking, and skiing), triggers antipredator behavior among prey. Visibility is the property that relates habitat structure to accessibility of visual information that allows animals to detect predators and evaluate predation risk. Thus, the visibility of a habitat (hereafter referred to as habitat visibility) for prey species alters the perceived risk of predation and therefore has a strong influence on their antipredator behavior. Yet, knowledge of how habitat visibility affects the response of animals to different types of human disturbance is limited, partly, because it is challenging to measure habitat visibility for animals at a fine spatial scale over a landscape, particularly in highly heterogeneous landscapes (e.g., forests). In this study, we employed a newly described approach that combines terrestrial and airborne LiDAR to contiguously measure fine-scale habitat visibility in a forested landscape. We applied the LiDAR-derived habitat visibility to examine how habitat visibility in forests affects the summer space use of 20 GPS-collared female red deer (Cervus elaphus) modeled with integrated step-selection functions in the Bavarian Forest National Park, Germany when exposed to various types of human disturbance including recreational activities, forest roads, hiking trails, and hunting. We found that red deer in our study area avoided areas with higher all types of human disturbance, especially during daylight hours. Furthermore, habitat visibility significantly modified the use of space by red deer in response to human recreational activities, forest roads, and hiking trails, but not to the hunting area. Red deer tended to tolerate a higher intensity of human recreational activities and to use areas closer to forest roads or hiking trails when they have lower habitat visibility (i.e., more cover). Our findings highlight the importance of considering visual perception when studying the response of wild animals to human disturbance. We emphasize the potential to mitigate negative consequences of human disturbance on wildlife, through measures such as maintaining vegetative buffers around recreational infrastructure (e.g., roads and skiing tracks) in order to reduce habitat visibility around areas frequented by humans.

Deep learning enables satellite-based monitoring of large populations of terrestrial mammals across heterogeneous landscape.

New satellite remote sensing and machine learning techniques offer untapped possibilities to monitor global biodiversity with unprecedented speed and precision. These efficiencies promise to reveal novel ecological insights at spatial scales which are germane to the management of populations and entire ecosystems. Here, we present a robust transferable deep learning pipeline to automatically locate and count large herds of migratory ungulates (wildebeest and zebra) in the Serengeti-Mara ecosystem using fine-resolution (38-50 cm) satellite imagery. The results achieve accurate detection of nearly 500,000 individuals across thousands of square kilometers and multiple habitat types, with an overall F1-score of 84.75% (Precision: 87.85%, Recall: 81.86%). This research demonstrates the capability of satellite remote sensing and machine learning techniques to automatically and accurately count very large populations of terrestrial mammals across a highly heterogeneous landscape. We also discuss the potential for satellite-derived species detections to advance basic understanding of animal behavior and ecology.

LiDAR reveals a preference for intermediate visibility by a forest-dwelling ungulate species.

Visibility (viewshed) plays a significant and diverse role in animals' behaviour and fitness. Understanding how visibility influences animal behaviour requires the measurement of habitat visibility at spatial scales commensurate to individual animal choices. However, measuring habitat visibility at a fine spatial scale over a landscape is a challenge, particularly in highly heterogeneous landscapes (e.g. forests). As a result, our ability to model the influence of fine-scale visibility on animal behaviour has been impeded or limited. In this study, we demonstrate the application of the concept of three-dimensional (3D) cumulative viewshed in the study of animal spatial behaviour at a landscape level. Specifically, we employed a newly described approach that combines terrestrial and airborne light detection and ranging (LiDAR) to measure fine-scale habitat visibility (3D cumulative viewshed) on a continuous scale in forested landscapes. We applied the LiDAR-derived visibility to investigate how visibility in forests affects the summer habitat selection and the movement of 20 GPS-collared female red deer Cervus elaphus in a temperate forest in Germany. We used integrated step selection analysis to determine whether red deer show any preference for fine-scale habitat visibility and whether visibility is related to the rate of movement of red deer. We found that red deer selected intermediate habitat visibility. Their preferred level of visibility during the day was substantially lower than that of night and twilight, whereas the preference was not significantly different between night and twilight. In addition, red deer moved faster in high-visibility areas, possibly mainly to avoid predation and anthropogenic risk. Furthermore, red deer moved most rapidly between locations in the twilight. For the first time, the preference for intermediate habitat visibility and the adaption of movement rate to fine-scale visibility by a forest-dwelling ungulate species at a landscape scale was revealed. The LiDAR technique used in this study offers fine-scale habitat visibility at the landscape level in forest ecosystems, which would be of broader interest in the fields of animal ecology and behaviour.

The Spectral Species Concept in Living Color.

Biodiversity monitoring is an almost inconceivable challenge at the scale of the entire Earth. The current (and soon to be flown) generation of spaceborne and airborne optical sensors (i.e., imaging spectrometers) can collect detailed information at unprecedented spatial, temporal, and spectral resolutions. These new data streams are preceded by a revolution in modeling and analytics that can utilize the richness of these datasets to measure a wide range of plant traits, community composition, and ecosystem functions. At the heart of this framework for monitoring plant biodiversity is the idea of remotely identifying species by making use of the 'spectral species' concept. In theory, the spectral species concept can be defined as a species characterized by a unique spectral signature and thus remotely detectable within pixel units of a spectral image. In reality, depending on spatial resolution, pixels may contain several species which renders species-specific assignment of spectral information more challenging. The aim of this paper is to review the spectral species concept and relate it to underlying ecological principles, while also discussing the complexities, challenges and opportunities to apply this concept given current and future scientific advances in remote sensing.

Linking the past and present to predict the distribution of Asian crested ibis (Nipponia nippon) under global changes.

Understanding how species' ecological niches adapt to environmental changes through time is critical for predicting the effect of future global change on endangered species. Yet few studies have incorporated knowledge of past niche shifting into the assessment of species' future fate in a changing world. In this study, we integrated the ecological niche dynamics into the species distribution modeling of the Asian crested ibis (Nipponia nippon) in East Asia. Specifically, we compared historical and present ecological niches of crested ibis in four-dimensional environmental space based on species occurrence and environmental data. We then employed a multi-temporal ecological niche model to estimate the potential geographical distribution of crested ibis under future climate and land-use changes. Our results show that crested ibis retained similar though not identical ecological niches over time. Compared to the historical baseline range, the current suitable habitat for crested ibis has been reduced by 39.6%. The effects of human activity outweigh those of climate change regarding the distribution of crested ibis. We conclude that the ecological niche of crested ibis was tended to be conservative, and future potentially suitable habitat may encounter northeastward and northwestward shift, and possibly expand by 18.7% referred to the historical range. The findings of our study are of clear importance for the conservation and successful reintroduction of crested ibis in East Asia.

rasterdiv-An Information Theory tailored R package for measuring ecosystem heterogeneity from space: To the origin and back.

Ecosystem heterogeneity has been widely recognized as a key ecological indicator of several ecological functions, diversity patterns and change, metapopulation dynamics, population connectivity or gene flow.In this paper, we present a new R package-rasterdiv-to calculate heterogeneity indices based on remotely sensed data. We also provide an ecological application at the landscape scale and demonstrate its power in revealing potentially hidden heterogeneity patterns.The rasterdiv package allows calculating multiple indices, robustly rooted in Information Theory, and based on reproducible open-source algorithms.

Priority list of biodiversity metrics to observe from space.

Monitoring global biodiversity from space through remotely sensing geospatial patterns has high potential to add to our knowledge acquired by field observation. Although a framework of essential biodiversity variables (EBVs) is emerging for monitoring biodiversity, its poor alignment with remote sensing products hinders interpolation between field observations. This study compiles a comprehensive, prioritized list of remote sensing biodiversity products that can further improve the monitoring of geospatial biodiversity patterns, enhancing the EBV framework and its applicability. The ecosystem structure and ecosystem function EBV classes, which capture the biological effects of disturbance as well as habitat structure, are shown by an expert review process to be the most relevant, feasible, accurate and mature for direct monitoring of biodiversity from satellites. Biodiversity products that require satellite remote sensing of a finer resolution that is still under development are given lower priority (for example, for the EBV class species traits). Some EBVs are not directly measurable by remote sensing from space, specifically the EBV class genetic composition. Linking remote sensing products to EBVs will accelerate product generation, improving reporting on the state of biodiversity from local to global scales.

Comment on "The global tree restoration potential".

Bastin et al (Reports, 5 July 2019, p. 76) claim that 205 gigatonnes of carbon can be globally sequestered by restoring 0.9 billion hectares of forest and woodland canopy cover. Reinterpreting the data from Bastin et al, we show that the global land area actually required to sequester human-emitted CO2 is at least a factor of 3 higher, representing an unrealistically large area.

Heavy metal pollution at mine sites estimated from reflectance spectroscopy following correction for skewed data.

The heavy metal concentration of soil samples often exhibits a skewed distribution, especially for soil samples from mining areas with an extremely high concentration of heavy metals. In this study, to model soil contamination in mining areas using reflectance spectroscopy, the skewed distribution was corrected and heavy metal concentration estimated. In total, 46 soil samples from a mining area, along with corresponding field soil spectra, were collected. Laboratory spectra of the soil samples and the field spectra were used to estimate copper (Cu) concentration in the mining area. A logarithmic transformation was used to correct the skewed distribution, and based on the sorption of Cu on spectrally active soil constituents, the spectral bands associated with iron oxides were extracted from the visible and near-infrared (VNIR) region and used in the estimation. A genetic algorithm was adopted for band selection, and partial least squares regression was used to calibrate the estimation model. After transforming the distribution of Cu concentration, the accuracies (R2) of the estimation of Cu concentration using laboratory and field spectra separately were 0.94 and 0.96. The results indicate that Cu concentration in the mining area can be estimated using reflectance spectroscopy following correction of skewed distribution.

Climate and land use changes will degrade the distribution of Rhododendrons in China.

Biodiversity loss and variation in species responses to climate and land use change have been found across broad taxonomic groups. However, whether species from the same taxonomic group with distinct geographical ranges will respond differently is poorly understood. The aim of this study is to predict the potential impacts of future climate and land use change on the distribution of narrow- and wide-ranging Rhododendron species, and estimate their relative contribution in China. We applied the presence-only ecological niche model MaxEnt to predict the distribution of 10 narrow-ranging and 10 wide-ranging Rhododendron species for the year 2070, using three general circulation models and three scenarios of climate and land use change. We measured the predicted distribution change of each species using change ratio, distance and direction of core range shifts, and niche overlap using Schoener's D. We found that the distribution areas of six narrow-ranging species would decrease, of which one species would go extinct. The remaining four narrow-ranging species would experience range expansion. Distribution of all the wide-ranging Rhododendron species would decrease. All Rhododendrons will shift to the northwest. We conclude that Rhododendron species generally will be negatively affected by the climatic and land use change expected in 2070 from the three scenarios evaluated in this study, but some narrow-ranging species may be positively influenced. Narrow-ranging Rhododendron species are more vulnerable compared to wide-ranging Rhododendron species. This study demonstrated that the effects of climate and land use change on alpine and subalpine plant species is species-specific, thereby strengthening our understanding of the impacts of climate and land use change on plant distribution.

Identifying rice stress on a regional scale from multi-temporal satellite images using a Bayesian method.

Crops are prone to various types of stress, such as caused by heavy metals, drought and pest/disease, during their life cycle. Heavy metal stress in crops poses a serious threat to crop quality and human health. However, differentiating between heavy metal and non-heavy metal stress presents a great challenge, since responses to environmental stress in crops are complex and uncertain, with different stressors possibly triggering similar canopy reflectance responses. This study aims to infer the occurrence probability of heavy metal stress (i.e., Cd stress) on a regional scale by integrating satellite-derived vegetation index and spatio-temporal characteristics of different stressors with a Bayesian method. The study area is located in the Hunan Province, China. Seven scenes of Sentinel-2 satellite images from 2016 to 2017 were collected, as well as Cd concentrations in the soil. First, the probability of rice being stressed was screened using the normalized difference red-edge index (NDRE) at all the growth stages of rice. Further, the stressed rice was used as input, along with the coefficients of spatio-temporal variation (CSTV) derived from NDRE, for a Bayesian method to infer rice exposed to Cd pollution. The results demonstrated that NDRE was a sensitive indicator for assessing stress levels in rice crops. The CSTV with a threshold of 2.7 successfully detected rice under Cd as well as abrupt stress on a regional scale. A high map accuracy for Cd induced stress in rice was achieved with an accuracy of 81.57%. This study suggests that vegetation index obtained from satellite images can assist in capturing crop stress, and that the used Bayesian method can be very useful for distinguishing a specific stressor in crops by incorporating temporal-spatial characteristic of different stressors in crops into satellite-derived vegetation index.

Heavy metal-induced stress in rice crops detected using multi-temporal Sentinel-2 satellite images.

Regional-level information on heavy metal pollution in agro-ecosystems is essential for food security because excessive levels of heavy metals in crops may pose risks to humans. However, collecting this information over large areas is inherently costly. This paper investigates the possibility of applying multi-temporal Sentinel-2 satellite images to detect heavy metal-induced stress (i.e., Cd stress) in rice crops in four study areas in Zhuzhou City, Hunan Province, China. For this purpose, we compared seven Sentinel-2 images acquired in 2016 and 2017 with in situ measured hyper-spectral data, chlorophyll content, rice leaf area index, and heavy metal concentrations in soil collected from 2014 to 2017. Vegetation indices (VIs) related to red edge bands were referred to as the sensitive indicators for screening stressed rice from unstressed rice. The coefficients of spatio-temporal variation (CSTV) derived from the VIs allowed us to discriminate crops exposed to pollution from heavy metals as well as environmental stressors. The results indicate that (i) the red edge chlorophyll index, the red edge position index, and the normalized difference red edge 2 index derived from multi-temporal Sentinel-2 images were good indicators for screening stressed rice from unstressed rice; (ii) Rice under Cd stress remained stable with lower CSTV values of VIs overall growth stages in the experimental region, whereas rice under other stressors (i.e., pests and disease) showed abrupt changes at some growth stages and presented "hot spots" with greater CSTV values; and (iii) the proposed spatio-temporal anomaly detection method was successful at detecting rice under Cd stress; and CSTVs of rice VIs stabilized regardless of whether they were applied to consecutive growth stages or to two different crop years. This study suggests that regional heavy metal stress may be accurately detected using multi-temporal Sentinel-2 images, using VIs sensitive to the spatio-temporal characteristics of crops.

Identification of Griffon Vulture's Flight Types Using High-Resolution Tracking Data.

Being one of the most frequently killed raptors by collision with wind turbines, little is known about the Griffon vulture's flight strategies and behaviour in a fine scale. In this study, we used high-resolution tracking data to differentiate between the most frequently observed flight types of the Griffon, and evaluated the performance of our proposed approach by an independent observation during a period of 4 weeks of fieldwork. Five passive flight types including three types of soaring and two types of gliding were discriminated using the patterns of measured GPS locations. Of all flight patterns, gliding was classified precisely (precision = 88%), followed by linear and thermal soaring with precision of 83 and 75%, respectively. The overall accuracy of our classification was 70%. Our study contributes a baseline technique using high-resolution tracking data for the classification of flight types, and is one step forward towards the collision management of this species.

Building essential biodiversity variables (EBVs) of species distribution and abundance at a global scale.

Much biodiversity data is collected worldwide, but it remains challenging to assemble the scattered knowledge for assessing biodiversity status and trends. The concept of Essential Biodiversity Variables (EBVs) was introduced to structure biodiversity monitoring globally, and to harmonize and standardize biodiversity data from disparate sources to capture a minimum set of critical variables required to study, report and manage biodiversity change. Here, we assess the challenges of a 'Big Data' approach to building global EBV data products across taxa and spatiotemporal scales, focusing on species distribution and abundance. The majority of currently available data on species distributions derives from incidentally reported observations or from surveys where presence-only or presence-absence data are sampled repeatedly with standardized protocols. Most abundance data come from opportunistic population counts or from population time series using standardized protocols (e.g. repeated surveys of the same population from single or multiple sites). Enormous complexity exists in integrating these heterogeneous, multi-source data sets across space, time, taxa and different sampling methods. Integration of such data into global EBV data products requires correcting biases introduced by imperfect detection and varying sampling effort, dealing with different spatial resolution and extents, harmonizing measurement units from different data sources or sampling methods, applying statistical tools and models for spatial inter- or extrapolation, and quantifying sources of uncertainty and errors in data and models. To support the development of EBVs by the Group on Earth Observations Biodiversity Observation Network (GEO BON), we identify 11 key workflow steps that will operationalize the process of building EBV data products within and across research infrastructures worldwide. These workflow steps take multiple sequential activities into account, including identification and aggregation of various raw data sources, data quality control, taxonomic name matching and statistical modelling of integrated data. We illustrate these steps with concrete examples from existing citizen science and professional monitoring projects, including eBird, the Tropical Ecology Assessment and Monitoring network, the Living Planet Index and the Baltic Sea zooplankton monitoring. The identified workflow steps are applicable to both terrestrial and aquatic systems and a broad range of spatial, temporal and taxonomic scales. They depend on clear, findable and accessible metadata, and we provide an overview of current data and metadata standards. Several challenges remain to be solved for building global EBV data products: (i) developing tools and models for combining heterogeneous, multi-source data sets and filling data gaps in geographic, temporal and taxonomic coverage, (ii) integrating emerging methods and technologies for data collection such as citizen science, sensor networks, DNA-based techniques and satellite remote sensing, (iii) solving major technical issues related to data product structure, data storage, execution of workflows and the production process/cycle as well as approaching technical interoperability among research infrastructures, (iv) allowing semantic interoperability by developing and adopting standards and tools for capturing consistent data and metadata, and (v) ensuring legal interoperability by endorsing open data or data that are free from restrictions on use, modification and sharing. Addressing these challenges is critical for biodiversity research and for assessing progress towards conservation policy targets and sustainable development goals.