A novel device for the determination of liposome/water partition coefficients.

A novel, cheap and easy-to-construct device and a simple method for partition coefficient determination in liposome/water system based on modified equilibrium dialysis have been developed. The device consists of two vials separated by a semi-permeable membrane, through which the free form of a low molecular weight substance is transported by shaking assisted diffusion. Five test substances, eugenol, carvacrol, thymol, 4-hydroxybenzyl alcohol (4-HBA) and butylparaben were analyzed after equilibration in aqueous phase by three methods, HPLC-UV, GC-MS and DPV with comparable results. This shows the possibility of using the proposed method in any laboratory with any equipment capable of analyzing the substance under study. The liposome/water partition coefficients (log Pl/w) determined for eugenol (2.39), thymol (2.83), carvacrol (2.78) and butylparaben (3.30) are consistent with previously published data. A strong effect of NaCl on the liposome/water partition coefficient was observed. The value of log Pl/w = 1.06 determined for 4-HBA in the presence of 0.15 mol L-1 NaCl in the partitioning liposomal system was considerably lower than in the absence of the salt (log Pl/w = 2.06). The developed method was used to determine the partition coefficient of morphine in liposome/water system without NaCl (log Pl/w = 2.65) under given conditions.

Non-enzymatic electrochemical determination of cholesterol in dairy products on boron-doped diamond electrode.

Determination of cholesterol in food matrices is essential for quality control concerning the health of consumers. Herein, a simple electrochemical approach for cholesterol quantitation in dairy products is evaluated. The newly developed differential pulse voltammetric method using acetonitrile-perchloric acid mixture as a supporting electrolyte is statistically compared to GC-MS and HPLC-UV. Oxidation signals of cholesterol at +1.5 V and +1.4 V (vs. Ag/AgNO3 in acetonitrile) provide detection limits of 4.9 µM and 6.1 µM on boron-doped diamond and glassy carbon electrodes, respectively. A simple liquid-liquid extraction procedure from dairy products into hexane resulted in a recovery rate of (74.8 ± 3.8)%. The method provides results in close agreement (at a 95% confidence level) with GC-MS, while HPLC-UV resulted in a significant difference in estimated cholesterol concentrations for all samples. This newly developed method is a simpler, faster and cheaper alternative to instrumentally demanding MS-based methods and clearly outperforms HPLC-UV.

Novel Screen-Printed Sensor with Chemically Deposited Boron-Doped Diamond Electrode: Preparation, Characterization, and Application.

New screen-printed sensor with a boron-doped diamond working electrode (SP/BDDE) was fabricated using a large-area linear antenna microwave chemical deposition vapor system (LA-MWCVD) with a novel precursor composition. It combines the advantages of disposable printed sensors, such as tailored design, low cost, and easy mass production, with excellent electrochemical properties of BDDE, including a wide available potential window, low background currents, chemical resistance, and resistance to passivation. The newly prepared SP/BDDEs were characterized by scanning electron microscopy (SEM) and Raman spectroscopy. Their electrochemical properties were investigated by cyclic voltammetry and electrochemical impedance spectroscopy using inner sphere ([Fe(CN)6]4-/3-) and outer sphere ([Ru(NH3)6]2+/3+) redox probes. Moreover, the applicability of these new sensors was verified by analysis of the anti-inflammatory drug lornoxicam in model and pharmaceutical samples. Using optimized differential pulse voltammetry in Britton-Robinson buffer of pH 3, detection limits for lornoxicam were 9 × 10-8 mol L-1. The oxidation mechanism of lornoxicam was investigated using bulk electrolysis and online electrochemical cell with mass spectrometry; nine distinct reaction steps and corresponding products and intermediates were identified.

Electroanalysis of Fentanyl and Its New Analogs: A Review.

The review describes fentanyl and its analogs as new synthetic opioids and the possibilities of their identification and determination using electrochemical methods (e.g., voltammetry, potentiometry, electrochemiluminescence) and electrochemical methods combined with various separation methods. The review also covers the analysis of new synthetic opioids, their parent compounds, and corresponding metabolites in body fluids, such as urine, blood, serum, and plasma, necessary for a fast and accurate diagnosis of intoxication. Identifying and quantifying these addictive and illicit substances and their metabolites is necessary for clinical, toxicological, and forensic purposes. As a reaction to the growing number of new synthetic opioid intoxications and increasing fatalities observed over the past ten years, we provide thorough background for developing new biosensors, screen-printed electrodes, or other point-of-care devices.

Carbon fiber brush electrode as a novel substrate for atmospheric solids analysis probe (ASAP) mass spectrometry: Electrochemical oxidation of brominated phenols.

A carbon fiber brush electrode (CFBE) was newly designed and used as a substrate for both controlled potential electrolysis and atmospheric solids analysis probe (ASAP) mass spectrometry. Electropolymerized and strongly adsorbed products of electrolysis were directly desorbed and ionized from the electrode surface. Electrochemical properties of the electrode investigated by cyclic voltammetry revealed large electroactive surface area (23 ± 3 cm2) at 1.3 cm long array of carbon fibers with diameter 6-9 µm. Some products of electrochemical oxidation of pentabromophenol and 2,4,6-tribromophenol formed a compact layer on the carbon fibers and were analyzed using ASAP. Eleven new oligomeric products were identified including quinones and biphenoquinones. These compounds were not observed previously in electrolyzed solutions by liquid or gas chromatography/mass spectrometry. The thickness around 58 nm and 45 nm of the oxidation products layers deposited on carbon fibers during electrolysis of pentabromophenol and 2,4,6-tribromophenol, respectively, was estimated from atomic force microscopy analysis and confirmed by scanning electron microscopy with energy-dispersive X-ray spectroscopy measurements.

Kinetic and structural investigation of the cytokinin oxidase/dehydrogenase active site.

Cytokinins are hormones that regulate plant development and their environmental responses. Their levels are mainly controlled by the cytokinin oxidase/dehydrogenase (CKO), which oxidatively cleaves cytokinins using redox-active electron acceptors. CKO belongs to the group of flavoproteins with an 8α-N1-histidyl FAD covalent linkage. Here, we investigated the role of seven active site residues, H105, D169, E288, V378, E381, P427 and L492, in substrate binding and catalysis of the CKO1 from maize (Zea mays, ZmCKO1) combining site-directed mutagenesis with kinetics and X-ray crystallography. We identify E381 as a key residue for enzyme specificity that restricts substrate binding as well as quinone electron acceptor binding. We show that D169 is important for catalysis and that H105 covalently linked to FAD maintains the enzyme's structural integrity, stability and high rates with electron acceptors. The L492A mutation significantly modulates the cleavage of aromatic cytokinins and zeatin isomers. The high resolution X-ray structures of ZmCKO1 and the E381S variant in complex with N6-(2-isopentenyl)adenosine reveal the binding mode of cytokinin ribosides. Those of ZmCKO2 and ZmCKO4a contain a mobile domain, which might contribute to binding of the N9 substituted cytokinins.

Structural and functional characterization of a plant S-nitrosoglutathione reductase from Solanum lycopersicum.

S-nitrosoglutathione reductase (GSNOR), also known as S-(hydroxymethyl)glutathione (HMGSH) dehydrogenase, belongs to the large alcohol dehydrogenase superfamily, namely to the class III ADHs. GSNOR catalyses the oxidation of HMGSH to S-formylglutathione using a catalytic zinc and NAD(+) as a coenzyme. The enzyme also catalyses the NADH-dependent reduction of S-nitrosoglutathione (GSNO). In plants, GSNO has been suggested to serve as a nitric oxide (NO) reservoir locally or possibly as NO donor in distant cells and tissues. NO and NO-related molecules such as S-nitrosothiols (S-NOs) play a central role in the regulation of normal plant physiological processes and host defence. The enzyme thus participates in the cellular homeostasis of S-NOs and in the metabolism of reactive nitrogen species. Although GSNOR has recently been characterized from several organisms, this study represents the first detailed biochemical and structural characterization of a plant GSNOR, that from tomato (Solanum lycopersicum). SlGSNOR gene expression is higher in roots and stems compared to leaves of young plants. It is highly expressed in the pistil and stamens and in fruits during ripening. The enzyme is a dimer and preferentially catalyses reduction of GSNO while glutathione and S-methylglutathione behave as non-competitive inhibitors. Using NAD(+), the enzyme oxidizes HMGSH and other alcohols such as cinnamylalcohol, geraniol and ω-hydroxyfatty acids. The crystal structures of the apoenzyme, of the enzyme in complex with NAD(+) and in complex with NADH, solved up to 1.9 Å resolution, represent the first structures of a plant GSNOR. They confirm that the binding of the coenzyme is associated with the active site zinc movement and changes in its coordination. In comparison to the well characterized human GSNOR, plant GSNORs exhibit a difference in the composition of the anion-binding pocket, which negatively influences the affinity for the carboxyl group of ω-hydroxyfatty acids.

Electrochemical behavior of quinoxalin-2-one derivatives at mercury electrodes and its analytical use.

Derivatives of quinoxalin-2-one are interesting compounds with potential pharmacological activity. From this point of view, understanding of their electrochemical behavior is of great importance. In the present paper, a mechanism of electrochemical reduction of quinoxalin-2-one derivatives at mercury dropping electrode was proposed. Pyrazine ring was found to be the main electroactive center undergoing a pH-dependent two-electron reduction process. The molecule protonization of nitrogen in the position 4 precedes the electron acceptance forming a semiquinone radical intermediate which is relatively stable in acidic solutions. Its further reduction is manifested by separated current signal. A positive mesomeric effect of the nonprotonized amino group in the position 7 of the derivative III accelerates the semiquinone reduction yielding a single current wave. The suggested reaction mechanism was verified by means of direct current polarography, differential pulse, cyclic and elimination voltammetry, and coulometry with subsequent GC/MS analysis. The understanding of the mechanism was applied in developing of analytical method for the determination of the studied compounds.

Electrochemical behavior and determination of rutin on modified carbon paste electrodes.

The performances of ionic liquid (1-hexyl-3-methylimidazolium-bis(trifluoromethylsulfonyl)imide, IL/CPE) and iron phthalocyanine (IP/CPE) modified carbon paste electrodes in electroanalytical determinations of rutin were evaluated and compared to the performance of unmodified carbon paste electrode (CPE). Cyclic voltammetry (CV), differential pulse voltammetry (DPV), differential pulse adsorptive stripping voltammetry (DPAdSV), and amperometry were used for rutin analysis. The best current responses of rutin were obtained at pH 4.0 for all tested techniques. IL/CPE electrode was found to perform best with DPAdSV technique, where a detection limit (LOD) as low as 5 nmol L(-1) of rutin was found. On the other hand, IP/CPE showed itself to be an optimum choice for DPV technique, where LOD of 80 nmol L(-1) was obtained. Analytical applicability of newly prepared electrodes was demonstrated on determination of rutin in the model samples and the extracts of buckwheat seeds. To find an optimum method for buckwheat seeds extraction, a boiling water extraction (BWE), Soxhlet extraction (SE), pressurized solvent extraction (PSE), and supercritical fluid extraction (SFE) were tested.

Electrochemical oxidation of berberine and mass spectrometric identification of its oxidation products.

Electrochemical oxidation of the isoquinoline alkaloid berberine in aqueous medium was studied by cyclic and differential pulse voltammetry at a glassy carbon electrode (GCE). Two anodic peaks of the quaternary form of berberine were observed at +1.2V and +1.4V (vs. SCE) in acidic and neutral solutions. When the anodic polarization exceeded the value of +1.1 V, the redox active film is formed on the GCE surface. The formation of adsorbed film was well-documented by quasireversible redox couple at +0.25 V which was studied in redox cycling experiments. In alkaline medium, a new anodic peak at +0.5 V appeared due to oxidation of berberine pseudobase to 8-oxoberberine. Solutions of berberine at different pH were subjected to controlled potential electrolysis on platinum gauze electrode and analyzed using liquid chromatography (HPLC) equipped with electrospray ionization/quadrupole time-of-flight mass spectrometry. The main water soluble monomeric product of berberine oxidation under physiological-near experimental conditions, OP1, was identified as demethyleneberberine cation (2,3-dihydroxy-9,10-dimethoxy-5,6-dihydroisoquinolino[3,2-a]isoquinolin-7-ium).

A novel fused-silica capillary dropping mercury electrode with long drop-time and its application on determination of critical micelle concentration.

A novel long drop time mercury electrode has been constructed from common fused-silica capillary (50 µm I.D., 360 µm E.D.). Proposed device provides reproducible mercury drops with typical lifetime 40-120 s. The electrode was used for a set of electrocapillary measurements aimed at determination of critical micelle concentration of anionic surfactants by a convection controlled drop-time technique. A critical micelle concentration of sodium dodecyl sulfate 5.6 ± 0.4 mmol L(-1) and 4.3 ± 0.4 mmol L(-1) were obtained in 1 mmol L(-1) and 5 mmol L(-1) phosphate buffer (pH 7.0), respectively. The values were comparable to those obtained from conductometric measurements under the same conditions (7.0 ± 0.1 mmol L(-1) and 5.2 ± 0.1 mmol L(-1), respectively) and the difference was explained in accordance with theory of hemi-micelle formation.

Electrochemical characterization of repaglinide and its determination in human plasma using liquid chromatography with dual-channel coulometric detection.

A simple, fast and sensitive HPLC method employing dual-channel coulometric detection for the determination of repaglinide in human plasma is presented. The assay involved extraction of repaglinide by ethyl acetate and isocratic reversed-phase liquid chromatography with dual-channel coulometric detection. The mobile phase composition was 50mM disodium hydrogen phosphate/acetonitrile (60:40, v/v), pH of the mobile phase 7.5 set up with phosphoric acid. For all analyses, the first cell working potential was +380mV, the second was +750mV (vs. Pd/H(2)). Calibration curve was linear over the concentration range of 5-500nmolL(-1). Rosiglitazone was used as an internal standard. The limit of detection (LOD) was established at 2.8nmolL(-1), and the lower limit of quantification (LLOQ) at 8.5nmolL(-1). The developed method was applied to human plasma samples spiked with repaglinide at therapeutical concentrations. It was confirmed that the method is suitable for pharmacokinetic studies or therapeutic monitoring.

Determination of antihyperglycemic drugs in nanomolar concentration levels by micellar electrokinetic chromatography with non-ionic surfactant.

A method for the separation of six selected antihyperglycemic (antidiabetic) drugs (tolbutamide, gliclazide, glimepiride, glibenclamide, repaglinide, and glipizide) was developed with use of micellar electrokinetic chromatography. Two non-ionic poly(ethylene glycol)-based surfactants Genapol X-080 and Triton X-114 (reduced) were studied as neutral pseudostationary phases. High alkaline pH 10.0 was used to obtain negative charges of separated antidiabetic drugs and non-ionic surfactants were employed for selectivity alteration. Both non-ionic surfactants provided good selectivity at concentration 0.2% (v/v) in sodium borate buffer and the separation of six drugs was obtained within 5min. An on-line preconcentration method based on reversed electrode polarity switching was employed for the determination of antihyperglycemic drugs in blood serum after acetonitrile protein precipitation. The limits of detection ranged from 20.8nmolL(-1) for tolbutamide to 6.5nmolL(-1) for glibenclamide, respectively.