RESUMEN
OBJECTIVE: This study aimed to validate a newly developed automated method (Relu® Creator, Leuven, Belgium) for multimodal registration of intraoral scan (IOS) and Cone Beam Computed Tomography (CBCT). METHODS: Time point-matched IOS and CBCT scans of forty patients with variable dental statuses (natural dentition, partial edentulism, presence of orthodontic brackets) were selected. Three operators registered IOS and CBCT scans using three state-of-the-art softwares for orthodontics and orthognathic surgery (IPS Case Designer Proplan CMF and Dolphin Imaging). Automated registration was compared to expert-performed semi-automated registration. Time consumption, accuracy, and consistency of the proposed method were benchmarked to semi-automated registration using root mean squared error calculations. The robustness of the automated registration was evaluated in relationship to the dental status of the patients in the dataset. RESULTS: On average, automatic registration was 7.3 times faster than semi-automatic registration performed by an expert operator. Automatic registration yielded reliable results with low deviation errors compared to the differently skilled operators and semi-automated software. Automated registration surpassed human variability as expressed in intra- and inter-operator inconsistencies. Neither orthodontic brackets nor edentulism impacted registration accuracy. CONCLUSIONS: The presented automated method for IOS and CBCT registration is faster, equally accurate, and more consistent than semi-automatic registration performed by an expert or an occasional operator. With similar results among cases with different dental statuses, the clinical feasibility of the method is ensured. CLINICAL SIGNIFICANCE: A validated automated registration method provides accurate and fast multimodal image integration without incorporating operator bias at the very start of the digital workflows for dentistry, periodontics, orthodontics and orthognathic surgery.
RESUMEN
BACKGROUND AND PURPOSE: Model-based selection of proton therapy patients relies on a predefined reduction in normal tissue complication probability (NTCP) with respect to photon therapy. The decision is necessarily made based on the treatment plan, but NTCP can be affected when the delivered treatment deviates from the plan due to delivery inaccuracies. Especially for proton therapy of lung cancer, this can be important because of tissue density changes and, with pencil beam scanning, the interplay effect between the proton beam and breathing motion. MATERIALS AND METHODS: In this work, we verified whether the expected benefit of proton therapy is retained despite delivery inaccuracies by reconstructing the delivered treatment using log-file based dose reconstruction and inter- and intrafractional accumulation. Additionally, the importance of two uncertain parameters for treatment reconstruction, namely deformable image registration (DIR) algorithm and α/ß ratio, was assessed. RESULTS: The expected benefit or proton therapy was confirmed in 97% of all studied cases, despite regular differences up to 2 percent point (p.p.) NTCP between the delivered and planned treatments. The choice of DIR algorithm affected NTCP up to 1.6 p.p., an order of magnitude higher than the effect of α/ß ratio. CONCLUSION: For the patient population and treatment technique employed, the predicted clinical benefit for patients selected for proton therapy was confirmed for 97.0% percent of all cases, although the NTCP based proton selection was subject to 2 p.p. variations due to delivery inaccuracies.
Asunto(s)
Neoplasias Pulmonares , Terapia de Protones , Humanos , Protones , Neoplasias Pulmonares/diagnóstico por imagen , Neoplasias Pulmonares/radioterapia , Neoplasias Pulmonares/etiología , Terapia de Protones/métodos , Incertidumbre , Movimiento (Física) , Planificación de la Radioterapia Asistida por Computador/métodos , Dosificación RadioterapéuticaRESUMEN
OBJECTIVE: Tooth segmentation and classification from cone-beam computed tomography (CBCT) is a prerequisite for diagnosis and treatment planning in the majority of digital dental workflows. However, an accurate and efficient segmentation of teeth in the presence of metal artefacts still remains a challenge. Therefore, the following study aimed to validate an automated deep convolutional neural network (CNN)-based tool for the segmentation and classification of teeth with orthodontic brackets on CBCT images. METHODS: A total of 215 CBCT scans (1780 teeth) were retrospectively collected, consisting of pre- and post-operative images of the patients who underwent combined orthodontic and orthognathic surgical treatment. All the scans were acquired with NewTom CBCT device. A complete dentition with orthodontic brackets and high-quality images were included. The dataset were randomly divided into three subsets with random allocation of all 32 tooth classes: training set (140 CBCT scans-400 teeth), validation set (35 CBCT scans-100 teeth), and test set (pre-operative: 25, post-operative: 15 = 40 CBCT scans-1280 teeth). A multiclass CNN-based tool was developed and its performance was assessed for automated segmentation and classification of teeth with brackets by comparison with a ground truth. RESULTS: The CNN model took 13.7 ± 1.2 s for the segmentation and classification of all the teeth on a single CBCT image. Overall, the segmentation performance was excellent with a high intersection over union (IoU) of 0.99. Anterior teeth showed a significantly lower IoU (P < 0.05) compared to premolar and molar teeth. The dice similarity coefficient score of anterior (0.99 ± 0.02) and premolar teeth (0.99 ± 0.10) in the pre-operative group was comparable to the post-operative group. The classification of teeth to the correct 32 classes had a high recall rate (99.9%) and precision (99%). CONCLUSIONS: The proposed CNN model outperformed other state-of-the-art algorithms in terms of accuracy and efficiency. It could act as a viable alternative for automatic segmentation and classification of teeth with brackets. CLINICAL SIGNIFICANCE: The proposed method could simplify the existing digital workflows of orthodontics, orthognathic surgery, restorative dentistry, and dental implantology by offering an accurate and efficient automated segmentation approach to clinicians, hence further enhancing the treatment predictability and outcomes.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Soportes Ortodóncicos , Humanos , Tomografía Computarizada de Haz Cónico/métodos , Procesamiento de Imagen Asistido por Computador/métodos , Redes Neurales de la Computación , Estudios RetrospectivosRESUMEN
OBJECTIVES: The present study investigated the accuracy, consistency, and time-efficiency of a novel deep convolutional neural network (CNN) based model for the automated maxillofacial bone segmentation from cone beam computed tomography (CBCT) images. METHOD: A dataset of 144 scans was acquired from two CBCT devices and randomly divided into three subsets: training set (n = 110), validation set (n = 10) and testing set (n = 24). A three-dimensional (3D) U-Net (CNN) model was developed, and the achieved automated segmentation was compared with a manual approach. RESULTS: The average time required for automated segmentation was 39.1 s with a 204-fold decrease in time consumption compared to manual segmentation (132.7 min). The model was highly accurate for identification of the bony structures of the anatomical region of interest with a dice similarity coefficient (DSC) of 92.6%. Additionally, the fully deterministic nature of the CNN model was able to provide 100% consistency without any variability. The inter-observer consistency for expert-based minor correction of the automated segmentation observed an excellent DSC of 99.7%. CONCLUSION: The proposed CNN model provided a time-efficient, accurate, and consistent CBCT-based automated segmentation of the maxillofacial complex. CLINICAL SIGNIFICANCE: Automated segmentation of the maxillofacial complex could act as an alternative to the conventional segmentation techniques for improving the efficiency of the digital workflows. This approach could deliver accurate and ready-to-print3D models, essential to patient-specific digital treatment planning for orthodontics, maxillofacial surgery, and implant dentistry.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Redes Neurales de la Computación , Tomografía Computarizada de Haz Cónico , Humanos , Procesamiento de Imagen Asistido por Computador/métodosRESUMEN
An accurate three-dimensional (3D) segmentation of the maxillary sinus is crucial for multiple diagnostic and treatment applications. Yet, it is challenging and time-consuming when manually performed on a cone-beam computed tomography (CBCT) dataset. Recently, convolutional neural networks (CNNs) have proven to provide excellent performance in the field of 3D image analysis. Hence, this study developed and validated a novel automated CNN-based methodology for the segmentation of maxillary sinus using CBCT images. A dataset of 264 sinuses were acquired from 2 CBCT devices and randomly divided into 3 subsets: training, validation, and testing. A 3D U-Net architecture CNN model was developed and compared to semi-automatic segmentation in terms of time, accuracy, and consistency. The average time was significantly reduced (p-value < 2.2e-16) by automatic segmentation (0.4 min) compared to semi-automatic segmentation (60.8 min). The model accurately identified the segmented region with a dice similarity co-efficient (DSC) of 98.4%. The inter-observer reliability for minor refinement of automatic segmentation showed an excellent DSC of 99.6%. The proposed CNN model provided a time-efficient, precise, and consistent automatic segmentation which could allow an accurate generation of 3D models for diagnosis and virtual treatment planning.
Asunto(s)
Seno Maxilar , Redes Neurales de la Computación , Tomografía Computarizada de Haz Cónico/métodos , Procesamiento de Imagen Asistido por Computador , Seno Maxilar/diagnóstico por imagen , Reproducibilidad de los ResultadosRESUMEN
OBJECTIVE: To assess the accuracy of a novel Artificial Intelligence (AI)-driven tool for automated detection of teeth and small edentulous regions on Cone-Beam Computed Tomography (CBCT) images. MATERIALS AND METHODS: After AI training and testing with 175 CBCT scans (130 for training and 40 for testing), validation was performed on a total of 46 CBCT scans selected for this purpose. Scans were split into fully dentate and partially dentate patients (small edentulous regions). The AI Driven tool (Virtual Patient Creator, Relu BV, Leuven, Belgium) automatically detected, segmented and labelled teeth and edentulous regions. Human performance served as clinical reference. Accuracy and speed of the AI-driven tool to detect and label teeth and edentulous regions in partially edentulous jaws were assessed. Automatic tooth segmentation was compared to manually refined segmentation and accuracy by means of Intersetion over Union (IoU) and 95% Hausdorff Distance served as a secondary outcome. RESULTS: The AI-driven tool achieved a general accuracy of 99.7% and 99% for detection and labelling of teeth and missing teeth for both fully dentate and partially dentate patients, respectively. Automated detections took a median time of 1.5s, while the human operator median time was 98s (P<0.0001). Segmentation accuracy measured by Intersection over Union was 0.96 and 0.97 for fully dentate and partially edentulous jaws respectively. CONCLUSIONS: The AI-driven tool was accurate and fast for CBCT-based detection, segmentation and labelling of teeth and missing teeth in partial edentulism. CLINICAL SIGNIFICANCE: The use of AI may represent a promising time-saving tool serving radiological reporting, with a major step forward towards automated dental charting, as well as surgical and treatment planning.
Asunto(s)
Arcada Edéntula , Boca Edéntula , Inteligencia Artificial , Tomografía Computarizada de Haz Cónico/métodos , Humanos , Procesamiento de Imagen Asistido por Computador , Arcada Edéntula/diagnóstico por imagen , Boca Edéntula/diagnóstico por imagen , Redes Neurales de la ComputaciónRESUMEN
OBJECTIVES: Automatic tooth segmentation and classification from cone beam computed tomography (CBCT) have become an integral component of the digital dental workflows. Therefore, the aim of this study was to develop and validate a deep learning approach for an automatic tooth segmentation and classification from CBCT images. METHODS: A dataset of 186 CBCT scans was acquired from two CBCT machines with different acquisition settings. An artificial intelligence (AI) framework was built to segment and classify teeth. Teeth were segmented in a three-step approach with each step consisting of a 3D U-Net and step 2 included classification. The dataset was divided into training set (140 scans) to train the model based on ground-truth segmented teeth, validation set (35 scans) to test the model performance and test set (11 scans) to evaluate the model performance compared to ground-truth. Different evaluation metrics were used such as precision, recall rate and time. RESULTS: The AI framework correctly segmented teeth with optimal precision (0.98±0.02) and recall (0.83±0.05). The difference between the AI model and ground-truth was 0.56±0.38 mm based on 95% Hausdorff distance confirming the high performance of AI compared to ground-truth. Furthermore, segmentation of all the teeth within a scan was more than 1800 times faster for AI compared to that of an expert. Teeth classification also performed optimally with a recall rate of 98.5% and precision of 97.9%. CONCLUSIONS: The proposed 3D U-Net based AI framework is an accurate and time-efficient deep learning system for automatic tooth segmentation and classification without expert refinement. CLINICAL SIGNIFICANCE: The proposed system might enable potential future applications for diagnostics and treatment planning in the field of digital dentistry, while reducing clinical workload.
Asunto(s)
Aprendizaje Profundo , Diente , Inteligencia Artificial , Tomografía Computarizada de Haz Cónico , Procesamiento de Imagen Asistido por Computador , Diente/diagnóstico por imagenRESUMEN
OBJECTIVE: To develop and validate a layered deep learning algorithm which automatically creates three-dimensional (3D) surface models of the human mandible out of cone-beam computed tomography (CBCT) imaging. MATERIALS & METHODS: Two convolutional networks using a 3D U-Net architecture were combined and deployed in a cloud-based artificial intelligence (AI) model. The AI model was trained in two phases and iteratively improved to optimize the segmentation result using 160 anonymized full skull CBCT scans of orthognathic surgery patients (70 preoperative scans and 90 postoperative scans). Finally, the final AI model was tested by assessing timing, consistency, and accuracy on a separate testing dataset of 15 pre- and 15 postoperative full skull CBCT scans. The AI model was compared to user refined AI segmentations (RAI) and to semi-automatic segmentation (SA), which is the current clinical standard. The time needed for segmentation was measured in seconds. Intra- and inter-operator consistency were assessed to check if the segmentation protocols delivered reproducible results. The following consistency metrics were used: intersection over union (IoU), dice similarity coefficient (DSC), Hausdorff distance (HD), absolute volume difference and root mean square (RMS) distance. To evaluate the match of the AI and RAI results to those of the SA method, their accuracy was measured using IoU, DSC, HD, absolute volume difference and RMS distance. RESULTS: On average, SA took 1218.4s. RAI showed a significant drop (p<0.0001) in timing to 456.5s (2.7-fold decrease). The AI method only took 17s (71.3-fold decrease). The average intra-operator IoU for RAI was 99.5% compared to 96.9% for SA. For inter-operator consistency, RAI scored an IoU of 99.6% compared to 94.6% for SA. The AI method was always consistent by default. In both the intra- and inter-operator consistency assessments, RAI outperformed SA on all metrics indicative of better consistency. With SA as the ground truth, AI and RAI scored an IoU of 94.6% and 94.4%, respectively. All accuracy metrics were similar for AI and RAI, meaning that both methods produce 3D models that closely match those produced by SA. CONCLUSION: A layered 3D U-Net architecture deep learning algorithm, with and without additional user refinements, improves time-efficiency, reduces operator error, and provides excellent accuracy when benchmarked against the clinical standard. CLINICAL SIGNIFICANCE: Semi-automatic segmentation in CBCT imaging is time-consuming and allows user-induced errors. Layered convolutional neural networks using a 3D U-Net architecture allow direct segmentation of high-resolution CBCT images. This approach creates 3D mandibular models in a more time-efficient and consistent way. It is accurate when benchmarked to semi-automatic segmentation.