The Influence of Kerosene on Microbiomes of Diverse Soils.

One of the most important challenges for soil science is to determine the limits for the sustainable functioning of contaminated ecosystems. The response of soil microbiomes to kerosene pollution is still poorly understood. Here, we model the impact of kerosene leakage on the composition of the topsoil microbiome in pot and field experiments with different loads of added kerosene (loads up to 100 g/kg; retention time up to 360 days). At four time points we measured kerosene concentration and sequenced variable regions of 16S ribosomal RNA in the microbial communities. Mainly alkaline Dystric Arenosols with low content of available phosphorus and soil organic matter had an increased fraction of Actinobacteriota, Firmicutes, Nitrospirota, Planctomycetota, and, to a lesser extent, Acidobacteriota and Verrucomicobacteriota. In contrast, in highly acidic Fibric Histosols, rich in soil organic matter and available phosphorus, the fraction of Acidobacteriota was higher, while the fraction of Actinobacteriota was lower. Albic Luvisols occupied an intermediate position in terms of both physicochemical properties and microbiome composition. The microbiomes of different soils show similar response to equal kerosene loads. In highly contaminated soils, the proportion of anaerobic bacteria-metabolizing hydrocarbons increased, whereas the proportion of aerobic bacteria decreased. During the field experiment, the soil microbiome recovered much faster than in the pot experiments, possibly due to migration of microorganisms from the polluted area. The microbial community of Fibric Histosols recovered in 6 months after kerosene had been loaded, while microbiomes of Dystric Arenosols and Albic Luvisols did not restore even after a year.

A novel simple and sensitive approach for determination of 1,1-dimethylhydrazine in aqueous samples by high performance liquid chromatography with ultraviolet and tandem mass spectrometric detection after derivatization with unsubstituted aromatic aldehydes.

In this work, simple, rapid and highly sensitive method of hazardous chemical 1,1-dimethylhydrazine (unsymmetrical dimethylhydrazine, UDMH) determination based on pre-column derivatization with unsubstituted aromatic aldehydes and reversed-phase high performance liquid chromatography-ultraviolet-tandem mass spectrometry (RP HPLC-UV-MS/MS) has been developed. Along with benzaldehyde, commercially available aromatic aldehydes, namely: 2-naphthaldehyde, 2-pyridinecarboxaldehyde, and 2-quinolinecarboxaldehyde, were used as derivatizing reagents in the analysis of hydrazines for the first time. The reactions were studied in a wide pH range by varying reaction time and other conditions. A slightly alkaline pH 9 was shown to be optimal for the derivatization of UDMH by aromatic aldehydes. The quantitative yield of derivatization products under the established conditions was confirmed by HPLC analysis with amperometric detection. For all studied reagents, wide linear ranges of concentrations (0.01-1000 µg/L) in natural water samples were observed. The limits of detection for UDMH in natural water were in the 3.7-130 ng/L range. 2-Quinolinecarboxaldehyde was selected as the most appropriate reagent for HPLC-UV-MS/MS determination of UDMH. In case of using this reagent, the accuracy was in the range of 97-102%, and precision, expressed as RSD was less than 8%. The developed approach does not require laborious stages of pre-concentration and isolation of UDMH from natural water components.

Manipulating selectivity of covalently-bonded hyperbranched anion exchangers toward organic acids. Part III: Effect of diamine structure in the external part of the functional layer.

The chromatographic properties of three hyperbranched anion exchangers having various diamines in the external part of the functional layer are studied in order to reveal diamine influence on selectivity toward mono- and divalent organic acids. The obtained stationary phases have the same structure of the internal part of the functional layer formed by repeating 4 modification cycles including alkylation with 1,4-butanediol diglycidyl ether (1,4-BDDGE) and amination with methylamine (MA) and differ by the structure of diamine used in the 5th modification cycle. For the first time several diamines (ethylenediamine, (2-aminoethyl)aminoethanol, and N,N'-bis(2-hydroxyethyl)ethylenediamine) are used for completing the last modification cycle in hyperbranching. The performance of three prepared anion exchangers is investigated using KOH and NaHCO3 as eluents and discussed with respect to the differences in hydrophilicity of the external part of the functional layer showing its effect on the separation of organic acids.

Manipulating selectivity of covalently-bonded hyperbranched anion exchangers toward organic acids. Part II: Effect of mono- and dicarboxylic amino acids in the internal part of the functional layer.

Four covalently-bonded hyperbranched anion exchangers based on poly(styrene-divinylbenzene) (PS-DVB) substrate with different structure of the functional layer were prepared using mono- and dianionic amino acids such as glycine, ß-alanine, aspartic acid, and glutamic acid in the internal part of the functional layer. Selectivity of all anion exchangers toward weakly retained organic acids was investigated at different temperatures in order to evaluate the effect of the number of carboxylic groups in the functional layer and its hydrophilicity on the separation. It was found that dianionic amino acids used in the first modification cycle of hyperbranching provide the best resolution for mono- and divalent organic acids, which makes the number of carboxylic groups in the structure of amino acid a key factor in the separation of such analytes with covalently-bonded hyperbranched anion exchangers, while the role of amino acid hydrophilicity is not that significant. Stationary phases prepared using aspartic and glutamic acids provided baseline resolution for quinic, glycolic, acetic, lactic, formic, and galacturonic acids, which are not resolved to baseline with modern commercially available anion exchangers; the increase of temperature was found to be favorable for improving the resolution even further.

Manipulating selectivity of covalently-bonded hyperbranched anion exchangers toward organic acids. Part I: Influence of primary amine substituents in the internal part of the functional layer.

Three covalently-bonded poly(styrene-divinylbenzene)-based (PS-DVB) hyperbranched anion exchangers prepared using primary amines with carboxylic, sulfonic or 2-hydroxyethyl substituents in the internal part of the functional layer were studied and compared for evaluating the effect of amines substituents on the chromatographic performance of the stationary phases. The hyperbranched coating was created on the surface of aminated PS-DVB substrate by repeating the modification cycles including alkylation with 1,4-butanediol diglycidyl ether (1,4-BDDGE) and amination with primary amine; glycine, taurine (2-aminoethanesulfonic acid) or ethanolamine were used in the first cycle, and 4 more cycles were conducted with methylamine (MA). The influence of the structure and type of primary amine used in the first cycle on the retention and selectivity toward inorganic anions, short-chain carboxylic acids, and polyphosphates was investigated using hydroxide eluent. The effect of temperature on the separation of organic acids was also studied for all stationary phases, which revealed the possibility to control and improve resolution for some pairs of analytes.

Direct liquid chromatographic determination of hydrazines: a review.

Today the determination of hydrazines is an important application in analytical chemistry. This review shows the current state-of-the-art analyses and discusses the merits of the direct chromatographic methods for the determination of hydrazines such as ion-, ion-exclusion, ion-pair and hydrophilic interaction chromatography. The methodological aspects of the separation and detection of hydrazines are considered for these methods. Examples of hydrazine determination in real samples are presented.