Tetralocular ovary and high silique width in yellow sarson lines of Brassica rapa (subspecies trilocularis) are due to a mutation in Bra034340 gene, a homologue of CLAVATA3 in Arabidopsis.

KEY MESSAGE: Genetic locus for tetralocular ovary (tet-o) in Brassica rapa was identified and it was shown that the number of locules and width of silique are associated. Brassica rapa is a highly polymorphic species containing many vegetables and oleiferous types. An interesting group of oleiferous types is the yellow sarson group (subspecies trilocularis) grown mostly in eastern India. This group contains lines that have bilocular ovaries, a defining trait of Brassicaceae, but also lines that have tetralocular ovaries. Yellow sarson lines commonly have high silique width which is further enhanced in the tetralocular types. We mapped the locus influencing tetralocular ovary in B. rapa using three mapping populations (F2, F6 and F7) derived from a cross between Chiifu (subspecies pekinensis, having bilocular ovary) and Tetralocular (having tetralocular ovary). QTL mapping of silique width was undertaken using the three mapping populations and a F2 population derived from a cross between Chiifu and YSPB-24 (a bilocular line belonging to yellow sarson group). Qualitative mapping of the trait governing locule number (tet-o) in B. rapa mapped the locus to linkage group A4. QTL mapping for silique width detected a major QTL on LG A4, co-mapping with the tet-o locus in bilocular/tetralocular cross. This QTL was not detected in the bilocular/bilocular cross. Saturation mapping of the tet-o region with SNP markers identified Bra034340, a homologue of CLAVATA3 of Arabidopsis thaliana, as the candidate gene for locule number. A C → T transition at position 176 of the coding sequence of Bra034340 revealed co-segregation with the tetralocular phenotype. The study of silique related traits is of interest both for understanding evolution under artificial selection and for breeding of cultivated Brassica species.

Fine mapping of loci involved with glucosinolate biosynthesis in oilseed mustard (Brassica juncea) using genomic information from allied species.

Fine mapping of six seed glucosinolate QTL (J2Gsl1, J3Gsl2, J9Gsl3, J16Gsl4, J17Gsl5 and J3Gsl6) (Ramchiary et al. in Theor Appl Genet 116:77-85, 2007a) was undertaken by the candidate gene approach. Based on the DNA sequences from Arabidopsis and Brassica oleracea for the different genes involved in the aliphatic glucosinolate biosynthesis, candidate genes were amplified and sequenced from high to low glucosinolate Brassica juncea lines Varuna and Heera, respectively. Of the 20 paralogues identified, 17 paralogues belonging to six gene families were mapped to 12 of the 18 linkage groups of B. juncea genome. Co-mapping of candidate genes with glucosinolate QTL revealed that the candidate gene BjuA.GSL-ELONG.a mapped to the QTL interval of J2Gsl1, BjuA.GSL-ELONG.c, BjuA.GSL-ELONG.d and BjuA.Myb28.a mapped to the QTL interval of J3Gsl2, BjuA.GSL-ALK.a mapped to the QTL interval of J3Gsl6 and BjuB.Myb28.a mapped to the QTL interval of J17Gsl5. The QTL J9Gsl3 and J16Gsl4 did not correspond to any of the mapped candidate genes. The functionality and contribution of different candidate genes/QTL was assessed by allelic variation study using phenotypic data of 785 BC(4)DH lines. It was observed that BjuA.Myb28.a and J9Gsl3 contributed significantly to the base level glucosinolate production while J16Gsl4, probably GSL-PRO, BjuA.GSL-ELONG.a and BjuA.GSL-ELONG.c contributed to the C3, C4 and C5 elongation pathways, respectively. Three A genome QTL: J2Gsl1harbouring BjuA.GSL-ELONG.a, J3Gsl2 harbouring both BjuA.GSL-ELONG.c and BjuA.Myb28.a and J9Gsl3, possibly the 'Bronowski genes', were identified as most important loci for breeding low glucosinolate B. juncea. We observed two-step genetic control of seed glucosinolate in B. juncea mainly effected by these three A genome QTL. This study, therefore, provides clues to the genetic mechanism of 'Bronowski genes' controlling the glucosinolate trait and also provides efficient markers for marker-assisted introgression of low glucosinolate trait in B. juncea.

QTL analysis reveals context-dependent loci for seed glucosinolate trait in the oilseed Brassica juncea: importance of recurrent selection backcross scheme for the identification of 'true' QTL.

Seed glucosinolate content in Brassica juncea is a complex quantitative trait. A recurrent selection backcross (RSB) method with a doubled haploid (DH) generation interspersing backcross generations was used for the introgression of low glucosinolate alleles from an east European gene pool B. juncea line, Heera into an Indian gene pool variety, Varuna. Phenotypic comparisons among the DH populations derived from early to advanced backcrosses revealed a shift in the mean values for various glucosinolates with the advancement of backcrossing, indicating a change in the selective values of the alleles with change in the genetic background due to the existence of epistasis and context dependencies. QTL mapping for various seed glucosinolates from early (F(1)DH) and advanced generation (BC(4)DH) populations confirmed the presence of epistasis and context dependency. The common QTL detected in both F(1)DH and BC(4)DH changed their R (2) values from the former to the later generation. Some of the QTL detected in the F(1)DH became irrelevant in the BC(4)DH population. Further, new QTL were detected in the BC(4)DH population for various glucosinolates. A validation study on a population of low glucosinolate DH lines derived from all the backcross generations of the RSB breeding programme revealed that the QTL detected in BC(4)DH were the 'true' QTL. Using glucosinolate as an example, the study provides strong evidence for the importance of the RSB method for the identification of the 'true' QTL which would be significant for marker assisted introgression of a complex quantitative trait whose expression is influenced by epistatic interactions.

Mapping of yield influencing QTL in Brassica juncea: implications for breeding of a major oilseed crop of dryland areas.

Quantitative trait loci (QTL) analysis of yield influencing traits was carried out in Brassica juncea (AABB) using a doubled haploid (DH) mapping population of 123 lines derived from a cross between Varuna (a line representing the Indian gene pool) and Heera (representing the east European gene pool) to identify potentially useful alleles from both the parents. The existing AFLP based map of B. juncea was further saturated with RFLP and SSR markers which led to the identification of the linkage groups belonging to the A (B. rapa) and B (B. nigra) genome components of B. juncea. For QTL dissection, the DH lines were evaluated at three different environments and phenotyped for 12 quantitative traits. A total of 65 QTL spread over 13 linkage groups (LG) were identified from the three environments. QTL analysis showed that the A genome has contributed more than the B genome to productivity (68% of the total QTL detected) suggesting a more prominent role of the A genome towards domestication of this crop. The east European line, Heera, carried favorable alleles for 42% of the detected QTL and the remaining 58% were in the Indian gene pool line, Varuna. We observed clustering of major QTL in a few linkage groups, particularly in J7 and J10 of the A genome, with QTL of different traits having agronomically antagonistic allelic effects co-mapping to the same genetic interval. QTL analysis also identified some well-separated QTL which could be readily transferred between the two pools. Based on the QTL analysis, we propose that improvement in yield could be achieved more readily by heterosis breeding rather than by pure line breeding.

A new cytoplasmic male sterility system for hybrid seed production in Indian oilseed mustard Brassica juncea.

We report a novel cytoplasmic male sterility (CMS) system in Brassica juncea (oilseed mustard) which could be used for production of hybrid seed in the crop. A male sterile plant identified in a microspore derived doubled haploid population of re-synthesized B. napus line ISN 706 was found to be a CMS as the trait was inherited from the female parent. This CMS, designated '126-1', was subsequently transferred to ten different B. juncea varieties and lines through inter-specific crosses followed by recurrent backcrossing. The F(1)s of inter-specific crosses were invariably partially fertile, but irrespective of the variety/line used, the recipient lines became progressively male sterile over five to seven generations and could be maintained by crossing the male sterile lines with their normal counterparts. The male sterile lines were found to be stable for the trait under both long and short day conditions. CMS lines when crossed with lines other than the respective maintainer line were restored for fertility, implying that any variety could act as a restorer for '126-1' cytoplasm in B. juncea. These unique features in maintenance and restoration of CMS lines coupled with near normal floral morphology of the CMS lines have allowed the use of '126-1' cytoplasm for hybrid seed production. The uniqueness of '126-1' has been further established by Southern hybridization with mitochondrial DNA probes and by a histological study of the development of male sterile anthers.

Mapping and tagging of seed coat colour and the identification of microsatellite markers for marker-assisted manipulation of the trait in Brassica juncea.

Microsatellite marker technology in combination with three doubled haploid mapping populations of Brassica juncea were used to map and tag two independent loci controlling seed coat colour in B. juncea. One of the populations, derived from a cross between a brown-seeded Indian cultivar, Varuna, and a Canadian yellow-seeded line, Heera, segregated for two genes coding for seed coat colour; the other two populations segregated for one gene each. Microsatellite markers were obtained from related Brassica species. Three microsatellite markers (Ra2-A11, Na10-A08 and Ni4-F11) showing strong association with seed coat colour were identified through bulk segregant analysis. Subsequent mapping placed Ra2-A11 and Na10-A08 on linkage group (LG) 1 at an interval of 0.6 cM from each other and marker Ni4-F11 on LG 2 of the linkage map of B. juncea published previously (Pradhan et al., Theor Appl Genet 106:607-614, 2003). The two seed coat colour genes were placed with markers Ra2-A11 and Na10-A08 on LG 1 and Ni4-F11 on LG 2 based on marker genotyping data derived from the two mapping populations segregating for one gene each. One of the genes (BjSC1) co-segregated with marker Na10-A08 in LG 1 and the other gene (BjSC2) with Ni4-F11 in LG 2, without any recombination in the respective mapping populations of 130 and 103 segregating plants. The identified microsatellite markers were studied for their length polymorphism in a number of yellow-seeded eastern European and brown-seeded Indian germplasm of B. juncea and were found to be useful for the diversification of yellow seed coat colour from a variety of sources into Indian germplasm.

Molecular tagging of erucic acid trait in oilseed mustard (Brassica juncea) by QTL mapping and single nucleotide polymorphisms in FAE1 gene.

Molecular mapping and tagging of the erucic acid trait (C22:1) in Brassica juncea was done by a candidate gene approach. Two QTLs underlying the variation of seed erucic acid content were assigned to two linkage groups of a B. juncea map using a doubled haploid (DH) mapping population derived from high x low erucic acid F(1) hybrid. Two consensus primers corresponding to the full-length Fatty Acid Elongase 1 ( FAE1) gene, reported to be involved in the elongation of C18:1 to C22:1, were designed. PCR amplification and subsequent cloning and sequencing identified two FAE1 genes ( FAE1.1 and FAE1.2) in both high and low erucic acid mustard lines. Sequence alignment of corresponding FAE1 genes between high and low erucic acid mustard lines identified four substitution type single nucleotide polymorphisms (SNPs) in FAE1.1 and three in FAE1.2. Using the SNuPE method of SNP genotyping, these two genes were mapped to two independent loci that co-segregated with the two QTLs governing the erucic acid trait. Association of wild ( E1E2) and mutant ( e1e2) haplotypes of two FAE1 genes with erucic acid variation in two segregating populations revealed that the e1e1e2e2 genotype identified low erucic acid individuals (<2%) and E1E1E2E2 identified individuals with highest erucic acid content (>40%). The E1e1E2e2 heterozygote was found to be intermediate in phenotype. The applicability of these SNPs in marker-assisted manipulation of the erucic acid trait was verified by genotyping a set of contrasting germplasm of B. juncea belonging to two distinct gene pools (Indian and east European) and other oil-yielding Brassica species.

A high-density linkage map in Brassica juncea (Indian mustard) using AFLP and RFLP markers.

A high-density genetic linkage map of Brassica juncea (2n = 36) was constructed with 996 AFLP (amplified fragment length polymorphism) and 33 RFLP (restriction fragment length polymorphism) markers using a F1-derived doubled-haploid (DH) population of 123 individuals. This mapping population was developed by crossing a well-adapted, extensively grown Indian variety Varuna and a canola quality line Heera. The two lines are highly divergent and contain a number of contrasting qualitative and quantitative traits of high agronomic value. AFLPs were generated by the use of restriction enzymes EcoRI or PstI in combination with either MseI or TaqI. Using 91 primer pairs, a total of 1,576 parental polymorphic bands were detected of which 996 were used for mapping. In addition, 33 RFLP markers, developed from genomic clones of B. napus, were added to the map. The segregation of each marker and linkage analysis was performed using the program JoinMap version 2.0. The 1,029 mapped-markers were aligned in 18 linkage groups, which is the haploid chromosome number of the species, at LOD values ranging from 5 to 8. The total map length was 1,629 cM with an average marker interval of 3.5 cM. AFLP markers generated by EcoRI were more clustered, whereas PstI markers showed more extensive distribution. A set of 26 primer pairs (9 EcoRI/ MseI, 6 EcoRI/ TaqI, 6 PstI/ MseI and 5 PstI/ TaqI) generating 385 markers were identified for AFLP-based whole-genome selection as these markers covered 96% of the genome mapped with the 91 primer pairs. The map developed in the present study could be used for dissection and the transfer of agronomically important traits and favourable QTLs from ill-adapted exotic germplasm to cultivated Indian varieties.

Transfer of Brassica tournefartii (TT) genes to allotetraploid oilseed Brassica species (B. juncea AABB, B. napus AACC, B. carinata BBCC): homoeologous pairing is more pronounced in the three-genome hybrids (TACC, TBAA, TCAA, TCBB) as compared to allodiploids (TA, TB, TC).

For the transfer of genes from B. tournefortii (TT) to the allotetraploid oilseed brassicas, B. juncea AABB, B. carinata BBCC and B. napus AACC, B. tournefortii was first crossed with the three basic diploid species, B. campestris (AA), B. nigra (BE) and B. oleracea (CC), to produce the allodiploids TA, TB and TC. These were tetraploidized by colchicine treatment to produce the allotetraploids TTAA, TTBB and TTCC, which were further crossed with B. juncea and B. napus to produce three-genome hybrids with substitution-type genomic configurations: TACC, TBAA and TCAA. These hybrids along with another hybrid TCBB produced earlier, the three allodiploids, their allotetraploids and the four diploid parent species were studied for their male meiotic behaviour. The diploid parent and the allotetraploids (TTAA, TTBB and TTCC) showed regular meiosis although the pollen viability was generally low in the allotetraploids. In the allodiploids (TA, TB and TC) only some end-to-end associations were observed without any clearly discernible chiasmata or exchange points. Chromosomes involved in end-to-end associations were randomly distributed at the metaphase/anaphase-I stages. In contrast, the three-genome hybrids (TACC, TBAA, TCAA and TCBB) showed normal bivalents whose number exceeded the expected bivalent values. Bivalents arising out of homoeologous pairing were indistinguishable from normal pairs by their disjunction pattern but could be distinguished on the basis of the heteromorphy of the homoeologous chromosomes. The three-genome hybrids could be backcrossed to allotetraploid oilseed brassicas as they had some fertility. In contrast, the allodiploids could neither be selfed nor back-crossed. On the basis of their meiotic stability, in terms of more pronounced homoeologous pairing and fertility for backcrossing, the three-genome configurations provide the best possible situation for the introgression of alien genes from the secondary gene pool to the allotetraploid oilseed crops B. juncea, B. napus and B. carinata.

Somatic hybrids with substitution type genomic configuration TCBB for the transfer of nuclear and organelle genes from Brassica tournefortii TT to allotetraploid oilseed crop B. carinata BBCC.

Oilseed crop Brassica carinata BBCC is a natural allotetraploid of diploid species B. nigra BB and B. oleracea CC. To transfer the nuclear and organelle genes in a concerted manner from an alien species, B. tournefortii TT, to B. carinata, we produced somatic hybrids with genomic configuration TCBB using B. nigra and B. oleracea stocks that carried selectable marker genes. B. tournefortii TT was sexually crossed with hygromycin-resistant B. oleracea CC. Protoplasts isolated from shoot cultures of hygromycin-resistant F1 hybrids of B. tournefortiixB. oleracea TC were fused with protoplasts of kanamycin-resistant B. nigra BB. In two different fusion experiments 80 colonies were obtained through selection on media containing both hygromycin and kanamycin. Of these, 39 colonies regenerated into plants. Analysis of 15 regenerants by random amplified polymorphic DNA (RAPD) markers showed the presence of all three genomes, thereby confirming these to be true hybrids. Restriction fragment length polymorphism (RFLP) analysis of organelle genomes with heterologous chloroplast (cp)and mitochondrial (mt) DNA probes showed that the chloroplast genome was inherited from either of the two parents while mitochondrial genomes predominantly showed novel configurations due to either rearrangements or intergenomic recombinations. We anticipate that the TCBB genomic configuration will provide a more conducive situation for recombination between the T and C genomes during meiosis than the TTCCBB or TCCBB type configurations that are usually produced for alien gene transfer. The agronomic aim of producing TCBB hybrids is to transfer mitochondrial genes conferring cytoplasmic male sterility and nuclear genes for fertility restoration from B. tournefortii to B. carinata.

Variation amongst Brassica juncea cultivars for regeneration from hypocotyl explants and optimization of conditions for Agrobacterium-mediated genetic transformation.

Twelve cultivars of Brassica juncea grown in different agroclimatic regions of the world were tested for their ability to regenerate in vitro from hypocotyl explants and, accordingly, were divided into three groups. One group of cultivars regenerated on MS medium supplemented with 2,4-D, BAP and with NAA, BAP combinations; another group regenerated only on MS with 2,4-D, BAP; and the third group showed very low regeneration on both of these combinations. Inclusion of silver nitrate in the medium was essential for high frequency of regeneration. In general, Indian cultivars were more responsive than the cultivars of CIS and Australian origin. Using the media optimal for regeneration and an Agrobacterium-based binary vector carrying hpt and gus-intron genes, conditions for genetic transformation of B. juncea hypocotyl explants were optimized. Transformation frequencies, identified by GUS staining at the initial stages of growth, were lower on MS medium with 2,4-D, BAP than on MS with NAA, BAP. Plants resistant to 20 µg/ml hygromycin were regenerated at a frequency of 11-36% from hypocotyl explants and were shown to be transformed by Southern blotting, GUS staining and progeny analysis.

Efficient regeneration of Brassica oleracea hypocotyl protoplasts and high frequency genetic transformation by direct DNA uptake.

Efficient regeneration (80%) and high frequency genetic transformation (10-33%) were achieved by culturing protoplasts isolated from hypocotyl tissues of six day old Brassica oleracea seedlings and by subjecting these protoplasts to PEG mediated direct plasmid uptake. Three different plasmid vectors carrying marker genes for resistance to methotrexate (dhfr), hygromycin (hpt) and phosphinotricin (bar) were constructed and used for transformation. Large number of normal, fertile transformants were obtained with vectors carrying hpt and bar genes. No transformants could be regenerated for resistance to methotrexate as it severely suppressed shoot differentiation.