RESUMEN
Recent investigations have demonstrated that nickel ferrite nanoparticles and their derivatives have toxicity effects on bacterial cells. In this study, we have prepared nickel ferrite nanoparticles (Ni/NiFe2O4) and nickel/nickel ferrite graphene oxide (Ni/NiFe2O4-GO) nanocomposite and evaluated their toxic effects on E. coli cells ATCC 25922. The prepared nanomaterials were characterized using X-ray diffraction, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and vibrating sample magnetometry techniques. The toxicity was evaluated using variations in cell viability, cell morphology, protein degradation, and oxidative stress. Ni/NiFe2O4-GO nanocomposites likewise prompt oxidative stress proved by the age of reactive oxygen species (ROS) and exhaustion of antioxidant glutathione. This is the first report indicating that Ni/NiFe2O4-GO nanocomposite-initiated cell death in E. coli through ROS age and oxidative stress.
RESUMEN
The sustainable synthesis of metal oxide materials provides an ecofriendly and more exciting approach in the domain of a clean environment. Besides, plant extracts to synthesize nanoparticles have been considered one of the more superior ecofriendly methods. This paper describes the biosynthetic preparation route of three different sizes of tetragonal structure SnO2 nanoparticles (SNPs) from the agro-waste cotton boll peel aqueous extract at 200, 500, and 800 °C for 3 h and represents a low-cost and alternative preparation method. The samples were characterized by X-ray diffraction, Fourier transform infrared spectrophotometry, ultraviolet-visible absorption spectroscopy, high-resolution transmission electron microscopy (HR-TEM), and energy-dispersive X-ray spectroscopy. Surface area and porosity size distribution were identified by nitrogen adsorption-desorption isotherms and Brunauer-Emmett-Teller analysis. The photocatalytic properties of the SNP samples were studied against methylene blue (MB) and methyl orange (MO), and the degradation was evaluated with three different size nanomaterials of 3.97, 8.48, and 13.43 nm. Photocatalytic activities were carried out under a multilamp (125 W Hg lamps) photoreactor. The smallest size sample exhibited the highest MB degradation efficiency within 30 min than the most significant size sample, which lasted 80 min. Similarly, in the case of MO, the smallest sample showed a more superior degradation efficiency with a shorter period (40 min) than the large-size samples (100 min). Therefore, our studies suggested that the developed SNP nanomaterials could be potential, promising photocatalysts against the degradation of industrial effluents.
RESUMEN
The prototypical plum-free, one-phase multiferric ferrite BiFeO3 (BFO) is solid, parallel, with a high ferroelectric Curie temperature and Neel temperature and antiferromagnetic and ferroelectric propagation. This work aims to synthesize pure-phase BFO in the quickest possible way. We followed the microwave-assisted solvothermal (MWAST) method to achieve pure-phase BFO in the shortest duration of 3 min. The experiment involves simple optimizations with KOH concentration and microwave power levels. The surface morphology along with magnetic properties of BFO synthesized via the MWAST method are altered with varying KOH concentrations and microwave (MW) power levels. Our X-ray diffraction findings reveal that the pure-phase BFO is formed at 800 W MW power, and the structural characterizations like transmission electron microscopy, field emission scanning electron microscopy with energy-dispersive X-ray analysis have displayed the formation of uniformly distributed spherical microflowers of pure-phase BFO exhibiting a single-crystalline nature. Besides, the magnetic measurements affirmed a reliable weak ferromagnetic behavior (magnetization â¼1.25 emu/g) in BFO synthesized at 800 W MW power. In addition, good dielectric behavior with low dielectric loss was accompanied by frequency-dependent dielectric studies indicating an excellent frequency response of the material, and also the room-temperature ferroelectric properties were studied using a ferroelectric analyzer. The polarization of pure-phase BFO increases with the applied electric field and exhibits unsaturated polarization-electric field loops due to leakage current. Moreover, the Fourier transform infrared spectrum of the synthesized material has indicated the pure-phase BFO, and the Raman data have elucidated the vibrational modes of BFO. Further, the analysis of X-ray photoelectron spectroscopy data has confirmed the presence of fewer Fe2+ ions and oxygen vacancies in the pure-phase BFO. Therefore, the collective characterizations and detailed analysis of BFO material have revealed the uniqueness of the MWAST method in producing the pure-phase BFO in 3 min with improved magnetic and dielectric properties, and hence the BFO synthesized via the MWAST method can be a potential candidate for multiferroic applications.
RESUMEN
Bilayer coatings of barium strontium titanate (BaxSr(1-x)TiO3)/poly [(vinylidenefluoride-co-trifluoroethylene] (PVDF-TrFE) were integrated on silicon Si (100) for pyroelectric devices. Pyroelectric properties of the composite were determined for different electrode materials (silver and aluminum) and different electrodes configurations creating an electric field in parallel and in-plane direction in the ferroelectric coating. For this purpose, parallel-plate and planar interdigital capacitors were fabricated. Anisotropy in the pyroelectric response was noted for the different directions of the measured electrical potential. The dynamic method was used to evaluate the pyroelectric properties in the temperature range of 22 to 48 °C. Pyroelectric response with a higher value was observed at the one plate's configuration of interdigital electrodes. The voltage response was the strongest when silver contacts were used. At temperatures near room temperature, the voltage increased by 182 µV at resolution of 7 µV/°C for the in-plain device configuration, vs. 290 µV at a resolution of 11 µV/°C for the out-of-plain configuration. A relationship between the surface morphology of the ferroelectric oxide and oxide/polymer coating and the pyroelectric voltage was also found, proving the smoothening effect of the introduction of polymer PVDF-TrFE over the BaSrTiO3 grains.