The Effect of Different Compositions and Concentrations of Etidronate-Containing Irrigants on the Antibacterial Activity of Sodium Hypochlorite against Enterococcus faecalis and Candida albicans.

We assessed the effect of different compositions and concentrations of two etidronate-containing irrigants on the antibacterial activity of sodium hypochlorite (SH) against Enterococcus faecalis and Candida albicans in vitro. Pure cultures of C. albicans and E. faecalis were isolated from root canal samples. The disc diffusion method was used to compare the antibacterial effect of pure SH and SH mixed with 9%, 15%, and 18% etidronate of two manufactures (dual rinse (DR); IsraDent (ID)) and EDTA. The pH and temperature of the solutions were measured immediately after mixing and within 40 min. The ANOVA revealed a significant influence of the type of irrigating solution on the C. albicans and E. faecalis inhibition zone diameters that ranged from 6.6 to 51.6 mm and from 6.4 to 12.4 mm, respectively. SH with DR 9% exhibited the highest effect against C. albicans. The antifungal activity of the other irrigants was SH = SH + DR15% = SH + DR18% = SH + ID9% > SH + EDTA > SH + ID15% > SH + ID18%. No significant differences in the anti-E. faecalis effect were revealed between the tested solutions except for the mixtures of SH and 15% and 18% ID, which exhibited no antiseptic effect. There was a strong positive correlation between antiseptic activity against both microorganisms and the pH values of the tested solutions. In conclusion, most etidronate formulations did not significantly hamper sodium hypochlorite activity against C. albicans and E. faecalis. The effect was concentration- and manufacturer-dependent.

Knowledge, Attitude, and Practice towards Chelating Agents in Endodontic Treatment among Dental Practitioners.

The use of chelating agents (CAs) in the endodontic irrigation protocol is required to dissolve the inorganic components of the smear layer. We aimed to assess the knowledge, attitude, and practice of dental professionals regarding the use of CAs during root canal treatment. A cross-sectional anonymous online survey was conducted among specialized endodontists and general dentists who routinely perform endodontic treatment and work in government-funded or private clinics in Moscow. The 8 min survey consisted of four parts: basic demographic data, knowledge (five items), attitude (four items), and practice (five items). We collected 376 completed questionnaires; a majority of the respondents were general dentists (87.5%) and worked in private clinics (77.4%). Most respondents (83.5%) showed a fair knowledge of the CAs used in endodontics, while 16.5% showed a poor knowledge of the topic. Small yet significant differences were found between endodontists and general practitioners and between dentists employed by private and government-funded clinics. A majority of dental practitioners (83%) demonstrated a positive attitude towards the use of CAs in endodontic treatment, and there were no differences among the study subgroups. Almost a third of the respondents always used chelating solutions during endodontic treatment, while 17% of the respondents did not use them at all. There were significant differences in this parameter between dentists working in private and government-funded clinics. Practice significantly correlated with attitude towards chelating agents and with knowledge of the topic. In conclusion, dental practitioners demonstrated a fair knowledge of CAs. Despite a positive attitude, 71% of the respondents did not use CAs for all endodontic patients.

Antigingivitis, Desensitizing, and Antiplaque Effects of Alkaline Toothpastes: A Randomized Clinical Trial.

Gingivitis is a widespread disease commonly associated with dentin hypersensitivity, that, in turn, may complicate routine dental care, leading to plaque accumulation. We aimed to assess the antigingivitis, desensitizing, and antiplaque effects of a fluoride-containing (TWF) alkaline toothpaste and a fluoride-free (TW) alkaline toothpaste. Eighty-four consenting patients aged 20-25 years with diagnosed gingivitis and dentin hypersensitivity (DH) were recruited in this double-blind, parallel-group study and randomly divided into two groups (each n = 42). Eighty-two patients completed the entire study protocol. The outcomes were assessed after 4 weeks of intervention. A significant improvement in gingival condition was found according to the modified gingival index, with effect sizes of 0.99 [CI95%: 0.52-1.46] and 1.71 [CI95%: 1.18-2.24], and the gingival bleeding index, with effect sizes of 3.17 [CI95%: 2.39-3.94] and 2.64 [CI95%: 1.96-3.32] in the TW and TWF groups, respectively. DH also decreased in both groups, with a significantly greater reduction in the TWF group (effect sizes of 3.28 [CI95%: 2.51-4.04] and 3.10 [CI95%: 2.40-3.80] according to the visual analog scale and Schiff scale, respectively). No side effects were registered. In conclusion, the use of alkaline toothpaste provided a significant reduction in gingival inflammation and bleeding, DH, and oral hygiene after 4 weeks of daily use in young adults. Trial Registration: NCT0562376. Funding: none.

Translucency and Color Stability of a Simplified Shade Nanohybrid Composite after Ultrasonic Scaling and Air-Powder Polishing.

We aimed to assess the influence of professional dental prophylaxis on the translucency and color stability of a novel simplified shade nanohybrid composite material. Sixty composite disks (5 mm in diameter and 2 mm thick) of light (n = 30) and dark (n = 30) shades were prepared. The specimens were randomly divided into the following three groups (n = 10) according to the prophylaxis procedure used: ultrasonic scaling, air-powder polishing with sodium bicarbonate, and controls. The specimens were submitted to translucency and color analysis based on the CIELab system. Two measurements were performed before and after 48-h storage in coffee. Translucency values of untreated light and dark specimens were 9.15 ± 0.38 and 5.28 ± 1.10, respectively. Air-powder polishing decreased the translucency of the light composite specimens. Storage in coffee resulted in color changes (∆E) ranging between 2.69 and 12.05 and a mean translucency decrease ranging between -0.88 and -6.91. The samples in the light group tended to exhibit greater staining; the treatment method had no effect on ∆E. It can be concluded that light-shade composite restorations are more prone to translucency and color changes resulting from air-powder polishing and contact with staining media. However, further research using other composites and powders is required.

The Effect of Toothpastes Containing Hydroxyapatite, Fluoroapatite, and Zn-Mg-hydroxyapatite Nanocrystals on Dentin Hypersensitivity: A Randomized Clinical Trial.

Aims: The aim of this study was to compare the effect of toothpastes containing hydroxyapatite (nHAP), Zn-Mg-hydroxyapatite (nZnMgHAP), and fluorapatite (nFAP) nanocrystals on dentin hypersensitivity (DH) associated with noncarious cervical lesions. Materials and Methods: Thirty consenting volunteers aged 35-45 years with DH were enrolled in a double-blind, parallel study, randomly assigned to the nHAP group (n = 10), the nZnMgHAP group (n = 10), or the nFAP group (n = 10), and instructed to use the toothpaste twice daily for one month. The primary outcome was Schiff scores at baseline and after 2 and 4 weeks. Results: All patients fulfilled the study requirements, and no adverse effects were registered. A reduction in DH was registered in 90%, 100%, and 50% of patients using nHAP, nZnMgHAP, and nFAP-containing toothpastes with effect sizes 2.52 (confidence interval [CI] 95%: 0.82, 4.14), 3.30 (CI 95%: 1.33, 5.20), and 1.44 (CI 95%: 0.09, 2.72), respectively. At 4 weeks, Schiff index scores decreased significantly in all groups compared to baseline. Conclusions: nZnMgHAP may be considered a promising agent for DH management.

The Effect of Ultrasonic Scaling and Air-Powder Polishing on the Roughness of the Enamel, Three Different Nanocomposites, and Composite/Enamel and Composite/Cementum Interfaces.

We aimed to assess the effects of ultrasonic scaling and air-powder polishing on the roughness of enamel, three nanocomposites (Premise, Herculite Ultra, Harmonize), and composite/enamel and composite/cementum interfaces. Class V cavities were restored in 99 extracted third molars with one of the three nanocomposites and treated with ultrasonic scaler or air-powder polishing device (calcium carbonate or sodium bicarbonate powders). The roughness (Ra) of the investigated surfaces was measured with contact profilometer before and after treatment. The data were analyzed using repeated measures ANOVA. Specimens' Ra values before instrumentation were near the clinically acceptable 0.2 µm threshold. All techniques increased the roughness of the tested surfaces; however, the enamel was slightly affected. The mean Ra values after prophylaxis for composite, composite/cementum and composite/enamel surfaces were 0.32-0.55, 1.33-1.73, and 1.25-1.36, respectively. The extent of composite surface damage was material dependent. Premise surface was not altered by ultrasonic scaling significantly. Air-powder polishing with both powders produced a greater increase in surface roughness of composite resin and restorations margins than ultrasonic scaling. The Ra values after both types of air polishing for Herculite Ultra and Harmonize were approximately 1.5 and 2 times higher, respectively, than those after ultrasonic scaling (p < 0.05).

Qualitative and Quantitative Assessment of Remineralizing Effect of Prophylactic Toothpaste Promoting Brushite Formation: A Randomized Clinical Trial.

BACKGROUND: Currently various studies are conducted to improve the effect of existing and developing new remineralizing agents. One of the trends in remineralizing therapy is the development of toothpaste allowing brushite crystals formation in the demineralized lesions of hard tooth tissues. AIM: The aim of this study was to assess the effect of toothpaste, forming a brushite, on the functional acid resistance of enamel and the speed of its remineralization. MATERIALS AND METHODS: This was a randomized controlled double-blind clinical study. Sixty consent patients aged 20-25 years were enrolled in the three groups: test group (n = 20), positive control group (n = 20), and negative control group (n = 20), which used brushite-forming toothpaste, toothpaste with hydroxyapatite (HAP), and toothpaste without remineralizing agents, respectively. The hygiene indices, the rate of enamel remineralization, the dynamics of acid resistance of enamel, and the level of enamel sensitivity were determined at baseline, after 2 and 4 weeks to assess the effectiveness of toothpastes. Friedman rank sum test (for related variables) and the Kruskal-Wallis rank sum test (for independent variables) with Nemenyi post hoc test were used for statistical comparisons. RESULTS: The study test and positive control groups showed significantly greater acid resistance of enamel (P > 0.05) and rate of its remineralization at the study endpoints as compared with negative control group.In the test and positive control groups, Schiff index values significantly decreased after 4 weeks, whereas in the negative control group no significant differences were observed at the study time points. The oral hygiene level improved significantly after 2 and 4 weeks in all groups. CONCLUSION: The 30-day use of paste that promotes brushite formation and paste with hydroxyapatite resulted in faster enamel remineralization and higher enamel resistance. Brushite-containing toothpaste may be used as an alternative to HAP containing for remineralizing and desensitizing treatment.

The Effect of Finishing and Polishing Sequences on The Surface Roughness of Three Different Nanocomposites and Composite/Enamel and Composite/Cementum Interfaces.

The purpose of this study was to investigate the effect of final surface treatment and dental composite type on the roughness of the composite surface, composite/enamel interface, and composite/cementum interface, as well as on the polishing time. Class V cavities prepared in extracted teeth (n = 126) were restored using one of the three nanohybrid composites with different filler sizes. The specimens were randomly assigned to three different finishing and polishing sequences. The roughness (Ra) of the investigated surfaces was measured using the contact profilometer. The time required to achieve visible gloss was documented. The data were analyzed using ANOVA with Tukey's post hoc test (p < 0.05). There was no significant influence of the composite type on the restoration surface roughness (p = 0.088), while the polishing method had a significant impact (p < 0.001). The Ra of the composites ranged between 0.08 µm and 0.29 µm, with the lowest values (0.09 µm ± 0.05 µm) found in the aluminum oxide disc group (p < 0.001). The time to achieve a visible composite gloss was influenced by the polishing method, composite type, and interactions between these factors (p < 0.001). The interface roughness was significantly greater than that of the composite surface (p < 0.001), and depended on the composite type and polishing system employed.

Comparative assessment of various composite materials and natural tooth tissue translucencies.

OBJECTIVES: The aim of this study was to compare the translucency levels of various composite materials that are positioned by their manufacturers as 'dentin,' 'opaque,' 'body,' and 'enamel' in relation to natural tooth tissues. METHODS: Sixteen commercial composite materials and 10 natural tooth tissue samples (enamel and dentin) were studied. The differences in color of dried and hydrated samples were measured on a black-and-white background using CIELab coordinates. Analysis of variance (ANOVA) and Kruskal-Wallis tests were used to compare the translucency parameter (TP) values of the different materials (P < 0.05), and t test was used to compare the TP values for the dried and hydrated samples, with the significance set at P < 0.001. RESULTS: The TP values of opaque shades for the studied composite materials ranged from 1.5 to 3.9, and those of enamel shades from 3.9 to 10.9. According to the obtained results, a body shade sample had a high level of translucency, comparable with some enamel shades of the materials studied (TP = 4.489 ± 0.505 after polymerization, and 3.916 ± 0.566 after 48 h of water storage). The translucency levels of dry composite samples and samples after hydration were not significantly different, while significant changes were observed for dentin and enamel (P < 0.05). SIGNIFICANCE: Choosing a composite material that is suitable for different clinical situations is a major challenge in everyday dental practice. Information about the relative translucency of various composites on the market and their compliance with natural tissues can help dentists to choose optimal restorative materials.