RESUMEN
In this study, Molybdenum precursors were synthesized with Triphenylphosphine, 1,2-Bis(diphenylphosphino)ethane, Pyridine, 2,2-Bipyridine as a ligands. The molybdenum precursors was used for Hydrocraking reaction of Vacuum Residue (VR). Hydrocracking reactions were carried out under the 430 °C and H2 pressure of 80 bar in an 100 ml high pressure reactor. New Molybdenum precursors were tested and their activities were compared with Mo-octoate. The Molybdeum-Phosphine precursor showed the best performances, high yield and low coke contents (below 0,5 wt%), in of hydrocracking for VR. To characterize the physicochemical properties of Moprecursor catalyst, various characterization techniques (NMR, XPS) were carried out. We confirmed that cokes in the reactor were contained the P atoms derived from ligand of Mo-precursor after hydrocracking of VR.
RESUMEN
Styrenated phenol alkoxylates (SP-A) are prepared from styrenated phenols (SP) and ethylene oxide (EO) under a homogeneous base catalyst. However, to use EO that is difficult to handle, a high-pressure reaction device capable of reaction process control should be used. Additionally, the homogeneous base catalyst requires a neutralization process to remove the remaining catalyst after the reaction, and it is difficult to separate the catalysts and the product. Therefore, in this study, the separation of product and catalyst by using KOH/La2O3 catalyst was facilitated in the production of SP-A. Also, it was possible to produce SP-A under atmospheric pressure reaction conditions using EC. The mean molecular weight of SP-A varied depending on the reaction conditions, and the size of the mean molecular weight could be arbitrarily controlled by changing the reaction conditions.
RESUMEN
Styrenated phenol was prepared by an alkylation of phenol using NiCl2 and AlCl3 supported on silica gel. The conversion of phenol and styrene of alkylation reaction, and the selectivity of styrenated phenol were investigated. The Al · Ni/SiO2 Supported catalyst was used, the conversion of phenol was almost 100%. The product was in the form of a mixture of mono-styrenated phenol, di-styrenated phenol and tri-styrenated phenol. The styrenated phenol were selectivity of the varies depending on the reaction conditions.
RESUMEN
In this study, Molybdenum precursors were synthesized with butanoic acid, hexanoic acid, nonanoic acid, decanoic acid, and undecanoic acid. In order to determine chemical structure of Synthesized molybdenum precursors, 1H(13C)-NMR, EA and ICP were used pyrolysis properties were measured TGA. The molybdenum precursors was used for Hydrocracking of Vacuum R1esidue (VR). It was shown that molybdenum nonanoate(3) was shown the lowerst Toluene Insoluble and Gas Product about 2.1 and 5.0 percent.
RESUMEN
Styrenated phenols are usually synthesized by the reaction of styrene and phenol under acid catalysts. Styrenated phenol involving high content of di-styrenated phenol (DSP) was synthesized, which can be used to prepare styrenated phenol alkoxylate. The solid catalyst used in this study was prepared by impregnation method. SO4 2- on SO4 2-/ZrO2 catalyst was introduced from an aqueous 1M-H2SO4 solution. The catalysts were characterized by SEM images, XRD patterns, and FT-IR spectra. The catalytic activity was examined by measuring the conversion of phenol and styrene in a liquid-phase batch reactor. Almost 100% conversion of both phenol and styrene over 15-SO4 2-/ZrO2 catalyst were obtained at reaction temperature of 100 °C and reaction time of 6 hr. Amount of catalyst to the reactants was 15 wt%. At same reaction conditions, selectivity of MSP, DSP, and TSP were 23.6%, 52.1%, and 5.4%, respectively. It was known that the selectivity to DSP was increased as IR absorption peak of 1236 cm-1 corresponding to OSO bonds was increased.
RESUMEN
The reaction of platinum 5,5"-(9,9-dioctyl-9H-fluorene-2,7-diyl)di-2,2'-bipyridine with 2,2'-bipyridine) PtCI2, (1,10-phenanthroline)PtC2 and (2,2'-bipyrimidine)PtC2: (2,2'-bipyridine)Pt[5,5"-(9,9-dioctyl-9H- fluorene-2,7-diyl)di-2,2'-bipyridine] (1) (2,2'-bipyrimi-dine)Pt[5,5"-(9,9-dioctyl-9H-fluorene-2,7-diyl)di- 2,2'-bipyridine] (2) (1,10-Phenantroline)-Pt[5,5"-(9,9-dioctyl-9H-fluorene-2,7-diyl)di-2,2'-bipyridine] (3). In the study, new platinum complex compounds were synthesized utilizing the ligand of a 5,5"-(9,9- dioctyl-9H-fluorene-2,7-diyl)di-2,2'-bipyridine). Each of the three complexes was obtained through the reaction carried out in this study. These complexes were analyzed using 1H(13C)-NMR, PL, and a UV-vis spectrophotometer. The maximum wavelengths of complexes 1, 2, and 3 appear at 519 nm, 375 nm, and 517 nm, respectively. The quantum yields of these complexes are in the range of 0.35-0.67.
RESUMEN
The reaction of platinum [Pt(4-(N,N-bis(piridyl)amino)stilbene)]Cl2 with 5,5"-(9,9-dioctyl-9H-fluorene- 2,7-diyl)di-2,2'-bipyridine, 2,2'-bipyridine, and 1,10-phenathroline affords the following complexes: [(4-(N,N-bis(piridyl)amino)stilbene)Pt(5,5"-(9,9-dioctyl-9H-fluorene-2,7-diyl)di-2,2'-bipyridine)] (1), [(4-(N,N-bis(piridyl)amino)stilbene)Pt(2,2'-bipyridine)] (2), and [(4-(N,N-bis(piridyl)amino)stilbene) Pt(1,10-phenathroline)] (3). In this study, new platinum complex compounds were synthesized utilizing the ligand of a 4-(N,N-bis(piridyl)amino)stilbene system. These complexes were analyzed using a 1H(13C)-NMR, UV-vis and PL spectrophotometer. The maximum wavelengths of complexes 1, 2, and 3 appear at 409 nm, 410 nm, and 503 nm, respectively. The quantum yields of these complexes are 0.32-0.92.
RESUMEN
The reaction of platinum [Pt(5,5-dmbpy)]Cl2 (5,5-dmbpy = 5,5'-dimethyl-2,2'-bipyridine) with 4,4'-dimethyl-2,2'-bipyridine (4,4-dmbpy), [Pt(dbbpy)]Cl2 (dbbpy = 4,4'-dibutyl-2,2'-bipyridine), [Pt(dpbpy)]Cl2 (dpbpy = 4,4'-dipentyl-2,2'-bipyridine) with 5,5'-dimethyl-2,2'-bipyridine (5,5-dmbpy) affords the following complexes: [(4,4-dmbpy)Pt(5,5-dmbpy)][PF6]2 (1) and [(dbbpy)Pt(5,5-dmbpy)][PF6]2 (2), [(dpbpy)Pt(5,5-dmbpy)][PF6]2 (3), [(5,5-dmbpy)Pt(5,5-dmbpy)][PF6]2 (4). This study was synthesized new platinum complex compounds utilizing ligand of 5,5'-Dimethyl-2,2'-dipyridyl System. To study the chemical composition was used 1H(13C)-NMR, UV-vis, Spectro photometer and Measurements about optical physics and chemical properties were measured to use spectrofluorometer. UV-vis absorption area was measured 310 nm to 383 nm and luminous wavelength was measured 390 nm to 419 nm.