Integrated Approach for Allyl Amine Synthesis Combining the Decarboxylative Coupling of Arylacrylic Acids with the Petasis Reaction.

A metal-free multicomponent reaction strategy for synthesizing allyl amines through decarboxylative coupling combined with the Petasis reaction is described. Utilizing (E)-3-(2,4,6-trimethoxyphenyl)acrylic acid, various boronic acids, a formaldehyde solution, and primary amines, the method operates efficiently without metal catalysts. Investigations reveal that electron-donating substituents in cinnamic acid derivatives significantly enhance reactivity, which is crucial for effective transformations. Under the optimized conditions, yields of ≤78% were obtained across a diverse range of 30 allyl amines.

Feasibility of the Non-Window-Type 3D-Printed Porous Titanium Cage in Posterior Lumbar Interbody Fusion: A Randomized Controlled Multicenter Trial.

BACKGROUND: Three-dimensionally printed titanium (3D-Ti) cages can be divided into 2 types: window-type cages, which have a void for bone graft, and non-window-type cages without a void. Few studies have investigated the necessity of a void for bone graft in fusion surgery. Therefore, the present study assessed the clinical and radiographic outcomes of window and non-window-type 3D-Ti cages in single-level posterior lumbar interbody fusion. METHODS: A total of 70 patients were randomly assigned to receive either a window or non-window cage; 61 patients (87%) completed final follow-up (32 from the window cage group, 29 from the non-window cage group). Radiographic outcomes, including fusion rates, subsidence, and intra-cage osseointegration patterns, were assessed. Intra-cage osseointegration was measured using the intra-cage bridging bone score for the window cage group and the surface osseointegration ratio score for the non-window cage group. Additionally, we looked for the presence of the trabecular bone remodeling (TBR) sign on computed tomography (CT) images. RESULTS: Of the 61 patients, 58 achieved interbody fusion, resulting in a 95.1% fusion rate. The fusion rate in the non-window cage group was comparable to, and not significantly different from, that in the window cage group (96.6% and 93.8%, p > 0.99). The subsidence rate showed no significant difference between the window and non-window cage groups (15.6% and 3.4%, respectively; p = 0.262). The intra-cage osseointegration scores showed a significant difference between the groups (p = 0.007), with the non-window cage group having a higher proportion of cases with a score of 4 compared with the window cage group. The TBR sign was observed in 87.9% of patients who achieved interbody fusion, with a higher rate in the non-window cage group across the entire cohort although the difference was not significant (89.7% versus 78.1%, p = 0.385). CONCLUSIONS: Non-window-type 3D-Ti cages showed equivalent clinical outcomes compared with window-type cages and comparable interbody fusion rates. These results suggest that the potential advantages of 3D-Ti cages could be optimized in the absence of a void for bone graft by providing a larger contact surface for osseointegration. LEVEL OF EVIDENCE: Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

The cross-sectional area of gluteal muscle on multiaxial CT scan as a predictor for diagnosing sarcopenia in patients with degenerative lumbar disease.

PURPOSE: This study examined the predictive value of the gluteal muscle index (GMI) for diagnosing sarcopenia in patients with degenerative lumbar disease (DLD), highlighting the need for effective diagnostic markers in this population. METHODS: This prospective observational study included 202 elderly patients scheduled for lumbar spine surgery. Muscle indices for psoas, paraspinal, and gluteal muscles were measured using multiaxial computed tomography. Sarcopenia was diagnosed per the 2019 Asian Working Group for Sarcopenia (AWGS) criteria. Statistical analysis comprised univariate and multivariate logistic regression to identify predictors of sarcopenia. RESULTS: Of patients, 77% were diagnosed with sarcopenia. The GMI and psoas muscle index (PMI) were identified as significant predictors of sarcopenia in the univariate analysis. Multivariate analysis confirmed their predictive value, with higher indices correlating with a reduced risk of sarcopenia (GMI odds ratio [OR] = 0.95, 95% confidence interval [CI] = 0.92-0.97; PMI OR = 0.95, 95% CI = 0.92-0.98, both P < .001). CONCLUSION: The GMI serves as a reliable predictor of sarcopenia in elderly patients undergoing lumbar spine surgery for DLD, suggesting a significant role of gluteal muscles in diagnosing sarcopenia. Incorporating GMI into clinical assessments is critical to better manage and diagnose sarcopenia in this population.

Brillouin expanded time-domain analysis based on dual optical frequency combs.

Brillouin Optical Time-Domain Analysis (BOTDA) is a widely-used distributed optical fiber sensing technology employing pulse-modulated pump waves for local information retrieval of the Brillouin gain or loss spectra. The spatial resolution of BOTDA systems is intrinsically linked to pulse duration, so high-resolution measurements demand high electronic bandwidths inversely proportional to the resolution. This paper introduces Brillouin Expanded Time-Domain Analysis (BETDA) as a modified BOTDA system, simultaneously achieving high spatial resolution and low detection bandwidth. Utilizing two optical frequency combs (OFCs) with different frequency intervals as pump and probe, local Brillouin gain spectra are recorded by their spectral beating traces in an expanded time domain. A 2-cm-long hotspot located in a 230 m single-mode fiber is successfully measured in the time domain with a detection bandwidth of less than 100 kHz using dual OFCs with tailored spectral phase, line spacing, and bandwidth.

Tailoring CuOx loading on CoFe2O4 nanocubes photocatalyst for superior photocatalytic degradation of triclosan pollutants under VL irradiation and toxicological evaluation.

In this study, we report the development of a novel CuOx(3 wt%)/CoFe2O4 nanocubes (NCs) photocatalyst through simple co-precipitation and wet impregnation methods for the efficient photocatalytic degradation of triclosan (TCS) pollutants. Initially, rod-shaped bare CoFe2O4 was synthesized using a simple co-precipitation technique. Subsequently, CuOx was loaded in various percentages (1, 2, and 3 wt%) onto the surface of bare CoFe2O4 nanorods (NRs) via the wet impregnation method. The synthesized materials were systematically characterized to evaluate their composition, structural and electrical characteristics. The CuOx(3 wt%)/CoFe2O4 NCs photocatalyst exhibited superior photocatalytic degradation efficiency of TCS (89.9%) compared to bare CoFe2O4 NRs (62.1 %), CuOx(1 wt%)/CoFe2O4 (80.1 %), CuOx(2 wt%)/CoFe2O4 (87.0 %) under visible light (VL) irradiation (λ ≥ 420 nm), respectively. This enhanced performance was attributed to the improved separation effectiveness of photogenerated electron (e-) and hole (h+) in CuOx(3 wt%)/CoFe2O4 NCs. Furthermore, the optimized CuOx(3 wt%)/CoFe2O4 NCs exhibited strong stability and reusability in TCS degradation, as demonstrated by three successive cycles. Genetic screening on Caenorhabditis elegans showed that CuOx(3 wt%)/CoFe2O4 NCs reduced ROS-induced oxidative stress during TCS photocatalytic degradation. ROS levels decreased at 30, 60, and 120-min intervals during TCS degradation, accompanied by improved egg hatching rates. Additionally, expression levels of stress-responsible antioxidant proteins like SOD-3GFP and HSP-16.2GFP were significantly normalized. This study demonstrates the efficiency of CuOx(3 wt%)/CoFe2O4 NCs in degrading TCS pollutants, offers insights into toxicity dynamics, and recommends its use for future environmental remediation.

Employing Piper longum extract for eco-friendly fabrication of PtPd alloy nanoclusters: advancing electrolytic performance of formic acid and methanol oxidation.

Advancement in bioinspired alloy nanomaterials has a crucial impact on fuel cell applications. Here, we report the synthesis of PtPd alloy nanoclusters via the hydrothermal method using Piper longum extract, representing a novel and environmentally friendly approach. Physicochemical characteristics of the synthesized nanoclusters were investigated using various instrumentation techniques, including X-ray photoelectron spectroscopy, X-ray diffraction, and High-Resolution Transmission electron microscopy. The electrocatalytic activity of the biogenic PtPd nanoclusters towards the oxidation of formic acid and methanol was evaluated chronoamperometry and cyclic voltammetry studies. The surface area of the electrocatalyst was determined to be 36.6 m2g-1 by Electrochemical Surface Area (ECSA) analysis. The biologically inspired PtPd alloy nanoclusters exhibited significantly higher electrocatalytic activity compared to commercial Pt/C, with specific current responses of 0.24 mA cm - 2 and 0.17 mA cm - 2 at synthesis temperatures of 180 °C and 200 °C, respectively, representing approximately four times higher oxidation current after 120 min. This innovative synthesis approach offers a promising pathway for the development of PtPd alloy nanoclusters with enhanced electrocatalytic activity, thereby advancing fuel cell technology towards a sustainable energy solution.

Development of Cell Culture Platforms for Study of Trabecular Meshwork Cells and Glaucoma Development.

BACKGROUND: Various cell culture platforms that could display native environmental cue-mimicking stimuli were developed, and effects of environmental cues on cell behaviors were studied with the cell culture platforms. Likewise, various cell culture platforms mimicking native trabecular meshwork (TM) composed of juxtacanalicular, corneoscleral and uveal meshwork located in internal scleral sulcus were used to study effects of environmental cues and/or drug treatments on TM cells and glaucoma development. Glaucoma is a disease that could cause blindness, and cause of glaucoma is not clearly identified yet. It appears that aqueous humor (AH) outflow resistance increased by damages on pathway of AH outflow can elevate intraocular pressure (IOP). These overall possibly contribute to development of glaucoma. METHODS: For the study of glaucoma, static and dynamic cell culture platforms were developed. Particularly, the dynamic platforms exploiting AH outflow-mimicking perfusion or increased IOP-mimicking increased pressure were used to study how perfusion or increased pressure could affect TM cells. Overall, potential mechanisms of glaucoma development, TM structures and compositions, TM cell culture platform types and researches on TM cells and glaucoma development with the platforms were described in this review. RESULTS AND CONCLUSION: This will be useful to improve researches on TM cells and develop enhanced therapies targeting glaucoma.

Optimizing multi-parameter distributed fiber sensors: a hybrid Rayleigh-Brillouin-Raman System approach.

An optimized single-end hybrid Rayleigh, Brillouin, and Raman distributed fiber sensing system has been developed for simultaneous measurement of multiple parameters. This system integrates 3-bit pulse coding for the Raman signal and the Brillouin amplification of the Rayleigh-backscattered signal, discriminating strain, temperature, and vibration using a single sensing fiber.

Effect of Furosemide on Prevertebral Soft Tissue Swelling after Anterior Cervical Fusion: A Comparative Study with Dexamethasone.

STUDY DESIGN: Retrospective cohort study. PURPOSE: This study aimed to investigate the effect of furosemide on prevertebral soft tissue swelling (PSTS) after anterior cervical fusion (ACF) and compare it with the effect of dexamethasone. OVERVIEW OF LITERATURE: Postoperative PSTS is a common complication of ACF. Dexamethasone has been used for its treatment; however, its efficacy remains controversial. Furosemide may reduce PSTS if it is soft tissue edema; however, no studies have demonstrated the effect of furosemide on PSTS after ACF. METHODS: The symptomatic PSTS group received intravenous (IV) administration of dexamethasone or furosemide. The asymptomatic PSTS group did not receive any medication. Patients were divided into the control (no medication, n=31), Dexa (IV dexamethasone, n=25), and Furo (IV furosemide, n=28) groups. PSTS was checked daily with simple radiographs and medication-induced reductions in PSTS from its peak or after medication. RESULTS: The peak time (postoperative days) of PSTS in the control (2.27±0.47, p<0.05) and Dexa (1.91±0.54, p<0.01) groups were significantly later than that in the Furo group (1.38±0.74). PSTS was significantly lower in the Furo group than in the Dexa group from postoperative days 4 to 7 (p<0.05). PSTS reduction after the peak was significantly greater in the Furo group than in the control (p<0.01) and Dexa (p<0.01) groups. After starting the medication therapy, the Furo group showed a significantly greater reduction in PSTS than the Dexa group (p<0.01). No difference was found in symptom improvement among the three groups. CONCLUSIONS: If furosemide is used to reduce PSTS after ACF, it can effectively reduce symptoms.

Transpedicular Intravertebral Cage Augmentation Using Expandable Cage in Kummell Disease: Technical Note and Case Series.

OBJECTIVE: To demonstrate the surgical techniques for transpedicular intravertebral cage augmentation (TPICA) using an expandable cage for Kummell disease, which requires posterior surgical stabilization, and provide the preliminary surgical outcomes. METHODS: Six consecutive patients undergoing TPICA surgery using an expandable cage with a minimum 6-month follow-up were evaluated. Radiographic analysis to evaluate the local kyphosis angle, restoration ratio of anterior vertebral height of the index vertebra, and clinical outcomes including the Oswestry Disability Index, EuroQol 5-dimension instrument, and visual analog scale for back and leg pain, were compared between the preoperative and final follow-ups. RESULTS: All patients showed improvements in all clinical outcomes and were able to walk independently without support at the last follow-up. In radiographic evaluation, the mean preoperative restoration ratio of anterior vertebral height was 41.2 ± 15.6%, which increased postoperatively to 70.3 ± 20.5% (1.70 times) and 62.4 ± 20.0% at the last follow-up (1.51 times). The mean preoperative local kyphosis angle was 10.5 ± 14.8 and was corrected to 6.0 ± 10.0 at the last follow-up. A slight loss of correction was observed between the postoperative period and the last follow-up; however, there was no clinical significance. CONCLUSIONS: Expandable cages in TPICA may allow easier surgical manipulation for cage insertion around the pedicle entrance, minimizing damage to the fractured vertebral body's end plates while achieving satisfactory height restoration compared to static cages, and may also provide wider indications for TPICA surgery.

Effect of lyophilized gelatin-norbornene cryogel size on calvarial bone regeneration.

Molding processes with molds containing topographical structures have been used for fabrication of hydrogel and cryogel particles. However, they can involve difficulties in separation of fabricated particles with complex shape from the molds or repeated fabrication of the particles although the overall processes do not require much skill and equipment. In this study, molds with etched superhydrophobic patterns have been developed by etching polytetrafluoroethylene (PTFE) blocks in user-defined designs with a femtosecond (FS) laser-based etching system. Lyophilized cryogel particles with various designs and sizes were fabricated by molding precursors with these PTFE molds. Additionally, the clean and easy separation of particles from the molds allowed repeated fabrication of the particles. For an application, relatively 'big' gelatin-norbornene (GelNB) cryogel particles prepared via molding with polydimethylsiloxane (PDMS) molds, swelling in phosphate buffered saline (PBS) and slicing height in half and 'small' GelNB cryogel particles fabricated with the PTFE molds were fabricated. Then, they were used to study scaffold size effect on calvarial bone regeneration. The molds generated with the FS laser-based etching system can be useful for various applications that require the mass production of cryogel particles in various geometries.

Feasibility of Non-window Three-Dimensional-Printed Porous Titanium Cage in Posterior Lumbar Interbody Fusion: A Pilot Trial.

Background: The commercially available design of a three-dimensional (3D)-printed titanium (3D-Ti) cage can be divided into two types according to the presence of a window: a cage with a window that allows filling of bone graft materials and a non-window cage for stand-alone use. This prospective observational case series study aimed to explore the clinical feasibility of using a non-window type 3D-Ti cage in cases of combined window and non-window cage implantation. Furthermore, we evaluated the bone in growth patterns of non-window cages and their correlation with published fusion grading systems. Methods: A total of 31 consecutive patients who underwent single-level posterior lumbar interbody fusion surgery were included. Two 3D-Ti cages with different designs were inserted: a non-window cage on the left side and a window cage on the right side. Radiographic fusion was defined by the segmental angle between flexion and extension radiographs (F-E angle) and cage bridging bone (CBB) scores on computed tomography. The association between the F-E angle and osteointegration scoring system including the surface osteointegration ratio (SOR) score was analyzed. Results: Radiographic fusion was achieved in 27 of 31 patients (87%) at 12 months postoperatively. Among the non-window cages, 23 of 31 (74.2%) had fair SOR scores, while 19 of 31 (61.3%) window cages had fair intra-cage CBB scores. The higher the SOR score was, the smaller the flexion-extension angle (SOR 0 vs. SOR 1: 6.30° ± 2.43° vs. 1.95° ± 0.99°, p < 0.001; SOR 0 vs. SOR 2: 6.03° ± 2.43° vs. 0.99°± 0.74°, p < 0.001). Conclusions: The clinical feasibility of using a non-window 3D-Ti cage during lumbar interbody fusion might be acceptable. Furthermore, a newly suggested fusion criterion for the use of the non-window cage, the SOR score, showed a significant association with the published fusion grading systems, demonstrating its feasibility in determining interbody fusion in lumbar spinal surgery.

A Beginner's Perspective on Biportal Endoscopic Spine Surgery in Single-Level Lumbar Decompression: A Comparative Study with a Microscopic Surgery.

Background: The application of biportal endoscopic spinal surgery (BESS) in spine surgery is increasing. However, the clinical results of related studies have been inconsistent. In this study, the perioperative and clinical outcomes of two techniques in single-level lumbar decompression surgery were compared using the perspective of a spine surgeon experienced in microscopic surgery but inexperienced in BESS. Methods: This is a retrospective study performed with prospectively collected data. From April 2019, 50 consecutive patients who underwent a single-level lumbar decompression surgery with BESS were evaluated. Additionally, the data of 150 consecutive patients who underwent the same microscopic surgery before April 2019 were collected. We performed 1 : 1 ratio propensity score matching for these two groups to adjust for baseline variables. The postoperative patient-reported outcome measures included the Oswestry Disability Index (ODI) and numeric rating scale for the back and leg preoperatively and at 6 months after surgery. The laboratory data (C-reactive protein [CRP, mg/L] and hemoglobin [Hb, g/dL]) were measured preoperatively and 3 times (1, 2, and 3 or 4 days) postoperatively. In these periods, the peak and lowest CRP and Hb concentrations were evaluated. The perioperative outcomes, operation time (from skin incision to dressing), length of hospital stay, drainage (for 24 hours after surgery), and surgery-related complications were also evaluated. Results: Forty-seven patients (27 men and 20 women) were included in each group. The postoperative 6-month ODI was significantly lower in the BESS group than in the microscope group (6.90 ± 5.98 vs. 11.54 ± 9.70). The peak CRP concentration (16.63 ± 19.41 vs. 42.40 ± 37.73, p < 0.001) and CRP increment (peak CRP minus preoperative CRP, 14.69 ± 19.47 vs. 40.71 ± 37.32, p < 0.001) were significantly higher in the microscope group. Operation time (83.72 ± 35.71 vs. 70.27 ± 23.24, p = 0.047) was significantly longer in the BESS group. Surgery-related complications were found in 6 and 3 cases in the BESS group (3 revisions, 2 dural tears, and 1 conversion to open surgery) and microscope group (2 revisions and 1 hematoma), respectively. Conclusions: BESS as a new technique resulted in satisfying short-term outcomes. It was a well-tolerated option for surgical treatment of single-level lumbar degenerative disease. The relatively high incidence of recurrence at the index level and incidental dural tears should be considered for surgeons new to BESS; however, these were manageable complications.

Fibrous hydrogels by electrospinning: Novel platforms for biomedical applications.

Hydrogels, hydrophilic and biocompatible polymeric networks, have been used for numerous biomedical applications because they have exhibited abilities to mimic features of extracellular matrix (ECM). In particular, the hydrogels engineered with electrospinning techniques have shown great performances in biomedical applications. Electrospinning techniques are to generate polymeric micro/nanofibers that can mimic geometries of natural ECM by drawing micro/nanofibers from polymer precursors with electrical forces, followed by structural stabilization of them. By exploiting the electrospinning techniques, the fibrous hydrogels have been fabricated and utilized as 2D/3D cell culture platforms, implantable scaffolds, and wound dressings. In addition, some hydrogels that respond to external stimuli have been used to develop biosensors. For comprehensive understanding, this review covers electrospinning processes, hydrogel precursors used for electrospinning, characteristics of fibrous hydrogels and specific biomedical applications of electrospun fibrous hydrogels and highlight their potential to promote use in biomedical applications.

Software reliability model for open-source software that considers the number of finite faults and dependent faults.

Software has become a vital factor in the fourth industrial revolution. Owing to the increase in demand for software products in various fields (big data, artificial intelligence, the Internet of Things, etc.), the software industry has expanded more than ever before. Therefore, software reliability has become very important, and efforts are being made to increase it. One of these efforts is the development of software reliability models (SRMs). SRMs have been studied for a long time as a model that predicts software reliability by using the number of software faults. Software failures can occur for several reasons, including independent software faults such as code errors and software hangs, as well as dependent cases where code errors lead to other software faults. Recently, due to the diversity of software operating environments, software faults are more likely to occur in a dependent manner, and, for this reason, they are likely to increase rapidly from the beginning and progress slowly to the maximum number thereafter. In addition, many large companies have focused on open-source software (OSS) development, and OSS is being developed by many users. In this study, we propose a new SRM that considers the number of finite faults and dependent faults, and examine the goodness-of-fit of a new SRM and other existing non-homogeneous Poisson process models based on the OSS datasets. Through numerical examples, the proposed model demonstrated a significantly better goodness-of-fit when compared to other existing models, and it also exhibited better results on the newly proposed integrated criteria.

Measurement of interspinous motion in dynamic cervical radiographs using a deep learning-based segmentation model.

OBJECTIVE: Interspinous motion (ISM) is a representative method for evaluating the functional fusion status following anterior cervical discectomy and fusion (ACDF) surgery, but the associated measuring difficulty and potential errors in the clinical setting remain concerns. The aim of this study was to investigate the feasibility of a deep learning-based segmentation model for measuring ISM in patients who underwent ACDF surgery. METHODS: This study is a retrospective analysis of flexion-extension dynamic cervical radiographs from a single institution and a validation of a convolutional neural network (CNN)-based artificial intelligence (AI) algorithm for measuring ISM. Data from 150 lateral cervical radiographs from the normal adult population were used to train the AI algorithm. A total of 106 pairs of dynamic flexion-extension radiographs from patients who underwent ACDF at a single institution were analyzed and validated for measuring ISM. To evaluate the agreement power between human experts and the AI algorithm, the authors assessed the interrater reliability using the intraclass correlation coefficient and root mean square error (RMSE) and performed a Bland-Altman plot analysis. They processed 106 pairs of radiographs from ACDF patients into the AI algorithm for autosegmenting the spinous process created using 150 normal population radiographs. The algorithm automatically segmented the spinous process and converted it to a binary large object (BLOB) image. The rightmost coordinate value of each spinous process from the BLOB image was extracted, and the pixel distance between the upper and lower spinous process coordinate value was calculated. The AI-measured ISM was calculated by multiplying the pixel distance by the pixel spacing value included in the DICOM tag of each radiograph. RESULTS: The AI algorithm showed a favorable prediction power for detecting spinous processes with an accuracy of 99.2% in the test set radiographs. The interrater reliability between the human and AI algorithm of ISM was 0.88 (95% CI 0.83-0.91), and its RMSE was 0.68. In the Bland-Altman plot analysis, the 95% limit of interrater differences ranged from 0.11 to 1.36 mm, and a few observations were outside the 95% limit. The mean difference between observers was 0.02 ± 0.68 mm. CONCLUSIONS: This novel CNN-based autosegmentation algorithm for measuring ISM in dynamic cervical radiographs showed strong agreement power to expert human raters and could help clinicians to evaluate segmental motion following ACDF surgery in clinical settings.

Hydroethanolic Extract of Fritillariae thunbergii Bulbus Alleviates Dextran Sulfate Sodium-Induced Ulcerative Colitis by Enhancing Intestinal Barrier Integrity.

The incidence of ulcerative colitis (UC), an inflammatory disorder of the gastrointestinal tract, has rapidly increased in Asian countries over several decades. To overcome the limitations of conventional drug therapies, including biologics for UC management, the development of herbal medicine-derived products has received continuous attention. In this study, we evaluated the beneficial effects of a hydroethanolic extract of Fritillariae thunbergii Bulbus (FTB) in a mouse model of DSS-induced UC. The DSS treatment successfully induced severe colonic inflammation and ulceration. However, the severity of colitis was reduced by the oral administration of FTB. Histopathological examination showed that FTB alleviated the infiltration of inflammatory cells (e.g., neutrophils and macrophages), damage to epithelial and goblet cells in the colonic mucosal layer, and fibrotic lesions. Additionally, FTB markedly reduced the gene expression of proinflammatory cytokines and extracellular matrix remodeling. Immunohistochemical analysis showed that FTB alleviated the decrease in occludin and zonula occludens-1 expression induced by DSS. In a Caco-2 monolayer system, FTB treatment improved intestinal barrier permeability in a dose-dependent manner and increased tight junction expression. Overall, FTB has potential as a therapeutic agent through the improvement of tissue damage and inflammation severity through the modulation of intestinal barrier integrity.

Network pharmacology-based identification of bioavailable anti-inflammatory agents from Psoralea corylifolia L. in an experimental colitis model.

ETHNOPHARMACOLOGICAL RELEVANCE: In traditional oriental medicine, the dried seeds of Psoralea corylifolia L. (PC) have been used to treat various diseases, including gastrointestinal, urinary, orthopedic, diarrheal, ulcer, and inflammatory disorders. AIM OF THE STUDY: Although its various biological properties are well-known, there is no information on the therapeutic effects and bioavailable components of PC against inflammatory bowel disease. Therefore, we focused on the relationship between hydroethanolic extract of PC (EPC) that ameliorates colitis in mice and bioactive constituents of EPC that suppress pro-inflammatory cytokines in macrophages. MATERIALS AND METHODS: We investigated the therapeutic effects of EPC in a dextran sulfate sodium-induced colitis mouse model and identified the orally absorbed components of EPC using UPLC-MS/MS analysis. In addition, we evaluated and validated the mechanism of action of the bioavailable constituents of EPC using network pharmacology analysis. The effects on nitric oxide (NO) and inflammatory cytokines were measured by Griess reagent and enzyme linked immunosorbent assay in lipopolysaccharide (LPS)-induced macrophages. RESULTS: In experimental colitis, EPC improved body weight loss, colon length shortening, and disease activity index. Moreover, EPC reduced the serum levels of pro-inflammatory cytokines and histopathological damage to the colon. Network pharmacological analysis identified 13 phytochemicals that were bioavailable following oral administration of EPC, as well as their potential anti-inflammatory effects. 11 identified EPC constituents markedly reduced the overproduction of NO, tumor necrosis factor-α, and/or interleukin-6 in macrophages induced by LPS. The LPS-induced expression of the nuclear factor kappa-light-chain-enhancer of activated B cells reporter gene was reduced by the 4 EPC constituents. CONCLUSIONS: The results indicate that the protective activity of EPC against colitis is a result of the additive effects of each constituent on the expression of inflammatory cytokines. Therefore, it suggests that 11 bioavailable phytochemicals of EPC could aid in the management of intestinal inflammation, and also provides useful insights into the clinical application of PC for the treatment of inflammatory bowel diseases.

Therapeutic effects of Pulsatilla koreana Nakai extract on ovalbumin-induced allergic rhinitis by inhibition of Th2 cell activation and differentiation via the IL-4/STAT6/GATA3 pathway.

Allergic rhinitis (AR), caused by immunoglobulin E (IgE)-mediated inflammation, generally occurs in the upper respiratory tract. T helper type 2 (Th2) cell-mediated cytokines, including interleukin (IL)-4, IL-5, and IL-13, are important factors in AR pathogenesis. Despite various treatment options, the difficulty in alleviating AR and pharmacological side effects necessitate development of new therapies. The root of Pulsatilla koreana Nakai (P. koreana), a pasque flower, has been used as a herbal medicine. However, its effects on AR remain unclear; therefore, we aimed to explore this subject in the current study. The therapeutic effects of P. koreana water extract (PKN) on the pathophysiological functions of the nasal mucosa was examined in ovalbumin (OVA)-induced AR mice. The effect of PKN on Th2 activation and differentiation was evaluated using concanavalin A-induced splenocytes and differentiated Th2 cells from naïve CD4+ T cells. We also investigated the effect of changes in JAK/STAT6/GATA3 signaling on IL-4-induced Th2 cells. In OVA-induced AR mice, PKN administration alleviated allergic nasal symptoms and decreased the total number of immune cells, lymphocytes, neutrophils, and eosinophils in nasal lavage fluid; serum levels of OVA-specific IgE, histamine, and IL-13 were also significantly reduced. PKN also ameliorated OVA-induced nasal mucosal tissue thickening by inhibiting inflammation and goblet cell hyperplasia. PKN treatment significantly inhibited Th2 activity and differentiation through the IL-4/STAT-6/GATA3 pathway in Th2 cells. PKN is an effective AR treatment with the potential to improve patients' daily lives by regulating the allergic inflammatory response induced by Th2 cells.

Significance of paraspinal muscle quality in risk between single and multiple osteoporotic vertebral fractures.

PURPOSE: To compare paraspinal muscle quality between patients with single and multiple osteoporotic vertebral fractures (OVFs) and evaluate the role of the paraspinal muscles in OVFs. METHODS: A total of 262 consecutive patients with OVFs were retrospectively analyzed in two groups: those with single OVF (n = 173) and those with multiple OVFs (n = 89). The cross-sectional area (CSA) and fatty degeneration of the paraspinal muscles were calculated from axial T2-weighted magnetic resonance imaging at the level of the L4 upper endplate by manual tracing in ImageJ software. Pearson's correlation analysis was performed to analyze correlations of paraspinal muscle quality to multiple OVFs. RESULTS: FD in all the paraspinal muscles was significantly higher in the multiple OVF group than the single OVF group (all p < 0.005). The functional CSA (fCSA) of the paraspinal muscles was significantly lower in the multiple OVF group than the single OVF group (all Ps < 0.001), except for the erector spine (p = 0.304). The Pearson's correlation analysis showed significant positive inter-correlations for the fCSAs of all the paraspinal muscles and the occurrence of multiple OVFs. CONCLUSIONS: The pure muscle volumes of the multifidus, psoas major, and quadratus lumborum were lower in patients with multiple OVFs than in those with a single OVF. Furthermore, the inter-correlation among all the paraspinal muscles indicate that the muscle-bone crosstalk profoundly existed in vertebral fracture cascade. Therefore, special attention to paraspinal muscle quality is needed to prevent progression to multiple OVFs.