Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 79
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
J Colloid Interface Sci ; 672: 675-687, 2024 Jun 07.
Artículo en Inglés | MEDLINE | ID: mdl-38865881

RESUMEN

Developing a straightforward and general strategy to regulate the surface microenvironment of a carbon matrix enriched with N/B motifs for efficient atomic utilization and electronic state of metal sites in bifunctional hydrogen production via ammonia-borane hydrolysis (ABH) and water electrolysis is a persistent challenge. Herein, we present a simple, green, and universal approach to fabricate B/N co-doped porous carbons using ammonia-borane (AB) as a triple functional agent, eliminating the need for hazardous and explosive functional agents and complicated procedures. The pyrolysis of AB induces the regulation of the surface microenvironment of the carbon matrix, leading to the formation of abundant surface functional groups, defects, and pore structures. This regulation enhances the efficiency of atom utilization and the electronic state of the active component, resulting in improved bifunctional hydrogen evolution. Among the catalysts, B/N co-doped vulcan carbon (Ru/BNC) with 2.1 wt% Ru loading demonstrates the highest performance in catalytic hydrogen production from ABH, achieving an ultrahigh turnover frequency of 1854 min-1 (depending on the dispersion of Ru). Furthermore, this catalyst shows remarkable electrochemical activity for hydrogen evolution in alkaline water electrolysis with a low overpotential of 31 mV at 10 mA cm-2. The present study provides a simple, green, and universal method to regulate the surface microenvironment of various carbons with B/N modulators, thereby adjusting the atomic utilization and electronic state of active metals for enhanced bifunctional hydrogen evolution.

2.
J Colloid Interface Sci ; 667: 269-281, 2024 Aug.
Artículo en Inglés | MEDLINE | ID: mdl-38636228

RESUMEN

Phase change materials (PCMs) offer significant advantages in energy conversion and storage by facilitating the storage and release of thermal energy during phase transition processes. However, challenges such as leakage during PCM phase transitions and poor light absorption properties have constrained their application in the field of photothermal energy storage. In this study, Montmorillonite (Mt) and molybdenum disulfide (MoS2) has been used to design and synthesize hybrid aerogels (MoS2/Mt) boasting high mechanical strength and excellent photothermal conversion performance. These aerogels are then used to encapsulate polyethylene glycol (PEG) to prepare composite PCMs with outstanding solar-thermal conversion and storage performances. The results show that the synthesized MoS2/Mt-PEG composite PCMs exhibit high enthalpies of melting and solidification of 169.16 J/g and 170.78 J/g, respectively, while the aerogel supporting material has a high compressive modulus of 1.96 MPa. Moreover, the composite material displayed excellent thermal stability and leakage resistance after undergoing 30 melting-cooling cycles. Furthermore, the incorporation of MoS2 imparted outstanding light absorption properties to the MoS2/Mt-PEG composite, resulting in a high light absorption and photothermal conversion-storage efficiency of 93.4 % and 96.47 %, respectively. Synthesized composite PCMs also demonstrate outstanding performance in solar-thermal-electricity conversion, achieving a voltage output of 458 mV under illumination conditions and maintaining a sustainable voltage output even after removing the light source. Thus, the composite PCMs prepared in this work can meet the requirements of high enthalpy, effective leakage prevention, efficient solar-thermal conversion and solar-thermal-electricity conversion performance, thereby presenting potential applications in practical solar energy collection, conversion, and storage.

3.
J Hazard Mater ; 470: 134146, 2024 May 15.
Artículo en Inglés | MEDLINE | ID: mdl-38583206

RESUMEN

Microplastics (MPs) vary in shape and surface characteristics in the environment. The attachment of MPs to surfaces can be studied using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. However, this theory does not account for the shape MPs. Therefore, we investigated the attachment of spherical, pear-shaped, and peanut-shaped polystyrene MPs to quartz sand in NaCl and CaCl2 solutions using batch tests. The attachment of MPs to quartz sand was quantified using the attachment efficiency (alpha). Subsequently, alpha behaviors were interpreted using energy barriers (EBs) and interaction minima obtained from extended DLVO calculations, which were performed using an equivalent sphere model (ESM) and a newly developed equivalent Cassini model (ECM) to account for the shape of the MPs. The ESM failed to interpret the alpha behavior of the three MP shapes because it predicted high EBs and shallow minima. The alpha values for spherical MPs (0.62-1.00 in NaCl and 0.48-0.96 in CaCl2) were higher than those for pear- and peanut-shaped MPs (0.01-0.63 in NaCl and 0.02-0.46 in CaCl2, and 0.01-0.59 in NaCl and 0.02-0.40 in CaCl2, respectively). Conversely, the ECM could interpret the alpha behavior of pear- and peanut-shaped MPs either by changes in EBs or interaction minima as a function of orientation angles and electrolyte ionic strength. Therefore, the particle shape must be considered to improve the attachment analyses.

4.
ACS Nano ; 18(9): 7298-7310, 2024 Mar 05.
Artículo en Inglés | MEDLINE | ID: mdl-38375824

RESUMEN

Recovery of rare earth elements (REEs) with trace amount in environmental applications and nuclear energy is becoming an increasingly urgent issue due to their genotoxicity and important role in society. Here, highly efficient recovery of low-concentration REEs from aqueous solutions by an enhanced chemisorption and electrosorption process of oxygen-doped molybdenum disulfide (O-doped MoS2) electrodes is performed. All REEs could be extremely recovered through a chemisorption and electrosorption coupling (CEC) method, and sorption behaviors were related with their outer-shell electrons. Light, medium, and heavy ((La(III), Gd(III), and Y(III)) rare earth elements were chosen for further investigating the adsorption and recovery performances under low-concentration conditions. Recovery of REEs could approach 100% under a low initial concentration condition where different recovery behaviors occurred with variable chemisorption interactions between REEs and O-doped MoS2. Experimental and theoretical results proved that doping O in MoS2 not only reduced the transfer resistance and improved the electrical double layer thickness of ion storage but also enhanced the chemical interaction of REEs and MoS2. Various outer-shell electrons of REEs performed different surficial chemisorption interactions with exposed sulfur and oxygen atoms of O-doped MoS2. Effects of variants including environmental conditions and operating parameters, such as applied voltage, initial concentration, pH condition, and electrode distance on adsorption capacity and recovery of REEs were examined to optimize the recovery process in order to achieve an ideal selective recovery of REEs. The total desorption of REEs from the O-doped MoS2 electrode was realized within 120 min while the electrode demonstrated a good cycling performance. This work presented a prospective way in establishing a CEC process with a two-dimensional metal sulfide electrode through structure engineering for efficient recovery of REEs within a low concentration range.

5.
J Hazard Mater ; 465: 133430, 2024 Mar 05.
Artículo en Inglés | MEDLINE | ID: mdl-38183940

RESUMEN

The recycling of electronic waste, i.e., waste Printed Circuit Boards (WPCBs), provides substantial environmental and economic advantages. In fact, the concentration of valuable precious and base metals in WPCBs is even higher compared to those found in mined ores. Nevertheless, it is still challenging to selectively extract precious metals with low concentrations from the pregnant leaching solution, due to the co-deposition of base metals, like Cu, which have higher concentrations. In this research, stepwise recovery of precious metals and copper directly from WPCBs thiosulfate leaching solution was facilitated by the Ti cathode coated with MoS2 (MoS2/Ti). The in-situ enrichment of Au(S2O3)23- and Ag(S2O3)23- at the surface of MoS2 enables the high efficiency and selectivity of electrodeposition, which has been confirmed through COMSOL Multiphysics simulations and visualization. As a result, the first-step electrodeposition at 0.6 V recovered 92.44 % Au and 98.18 % Ag without any co-deposition of Cu. Subsequently, the second-step recovery employed a constant current of 0.03 A, achieving 100 % recovery of copper within 12 h. Furthermore, this study optimized the reduction potential, NH3·H2O concentration, and S2O32- concentration for the stepwise electrodeposition process. These findings provide valuable insights for establishing a closed loop circular economy in the electronics industry.

6.
J Colloid Interface Sci ; 652(Pt B): 1620-1630, 2023 Dec 15.
Artículo en Inglés | MEDLINE | ID: mdl-37666194

RESUMEN

Two-dimensional montmorillonite nanosheet (MMTNS) is desirable building block for fabricating multifunctional materials as due to its extraordinary properties. In practical applications, however, the concentration of MMTNS prepared by exfoliation is normally too low to be used for material assembling. The general thermal-concentration method is effective, however, it can be time-consuming and require a lot of energy. In this case, the remarkable dispersion stability of MMTNS is worth noting. Herein, the extraordinary dispersion stability of MMTNS derived from electrostatic and hydration repulsion was firstly revealed by molecular dynamics (MD) simulation, which caused the poor dewatering of MMTNS. Further, based on the surface and structural chemistry of MMTNS, a series of strategies, involving charge and cross-linked structure regulation on the edge surface, as well as electrical double-layer modulation and calcification modification based on the electrolytes, were proposed to inhibit the dispersion and enhance the aggregation of MMTNS. Intriguingly, a novel chemical, Tetraethylenepentamine (TEPA) was applied in the dewatering of MMTNS. The TEPA not only act as a cross-linker to bond with MMTNS into an easy-to-dewatering 3D network structure, but also act as a switch for effortless viscosity tuning. Meanwhile, the dual function of electrolytes for electrical double layer compression and calcification modification of MMTNS was investigated by DLVO theory and structural analyses. This work offers explicit directions for improving the dewatering performance of MMTNS to meet the requirements of practical implementation.

7.
Environ Sci Pollut Res Int ; 30(50): 109266-109282, 2023 Oct.
Artículo en Inglés | MEDLINE | ID: mdl-37759064

RESUMEN

In recent years, the solid wastes from the coal industry have been widely used as soil amendments. Nevertheless, the impact of utilizing coal slime for copper tailing restoration in terms of plant growth, physicochemical characteristics of the tailing soil, and microbial succession remains uncertain.Herein, the coal slime was employed as a modifier into copper tailings. Their effect on the growth and physiological response of Ryegrass, and the soil physicochemical properties as well as the bacterial community structure were investigated. The results indicated that after a 30-day of restoration, the addition of coal slime at a ratio of 40% enhanced plant growth, with a 21.69% rise in chlorophyll content, and a 62.44% increase in peroxidase activity. The addition of 40% coal slime also increased the content of nutrient elements in copper tailings. Following a 20-day period of restoration, the concentrations of available copper and available zinc in the modified tailings decreased by 39.6% and 48.51%, respectively, with 40% of coal slime added. In the meantime, there was an observed augmentation in the species diversity of the bacterial community in the modified tailings. The alterations in both community structure and function were primarily influenced by variations in pH value, available nitrogen, phosphorus, potassium, and available copper. The addition of 40% coal slime makes the physicochemical properties and microbial community evolution of copper tailings reach a balance point. The utilization of coal slime has the potential to enhance the physicochemical characteristics of tailings and promote the proliferation of microbial communities, hence facilitating the soil evolution of two distinct solid waste materials. Consequently, the application of coal slime in the restoration of heavy metal tailings is a viable approach, offering both cost-effectiveness and efficacy as an enhancer.


Asunto(s)
Metales Pesados , Contaminantes del Suelo , Cobre , Suelo/química , Carbón Mineral , Microbiología del Suelo , Metales Pesados/análisis , Contaminantes del Suelo/análisis
8.
Materials (Basel) ; 16(7)2023 Mar 29.
Artículo en Inglés | MEDLINE | ID: mdl-37049036

RESUMEN

It is crucial but challenging to detect intermediate or end products promptly. Traditional chemical detection methods are time-consuming and cannot detect mineral phase content. Thermal infrared hyperspectral (TIH) technology is an effective means of real-time imaging and can precisely capture the emissivity characteristics of objects. This study introduces TIH to estimate the content of potassium salts, with a model based on Competitive Adaptive Reweighted Sampling (CARS) and Partial Least Squares Regression (PLSR). The model takes the emissivity spectrum of potassium salt into account and accurately predicts the content of Mixing Potassium (MP), a mineral mixture produced in Lop Nur, Xinjiang. The main mineral content in MP was measured by Mineral Liberation Analyzer (MLA), mainly including picromerite, potassium chloride, magnesium sulfate, and less sodium chloride. 129 configured MP samples were divided into calibration (97 samples) and prediction (32 samples) sets. The CARS-PLSR method achieved good prediction results for MP mineral content (picromerite: correlation coefficient of correction set (Rp2) = 0.943, predicted root mean square error (RMSEP) = 2.72%, relative predictive deviation (RPD) = 4.24; potassium chloride: Rp2 = 0.948, RMSEP = 2.86%, RPD = 4.42). Experimental results convey that TIH technology can effectively identify the emissivity characteristics of MP minerals, facilitating quantitative detection of MP mineral content.

9.
FEMS Microbiol Ecol ; 99(5)2023 04 07.
Artículo en Inglés | MEDLINE | ID: mdl-37028939

RESUMEN

Microcoleus vaginatus has been regarded as the important contributor for biocrust formation and ecological services. However, little is known about its living forms in biocrusts, and whether the living form is related to biocrust structure. Therefore, in this study, natural biocrusts collected from the Gurbantunggut Desert were divided into different aggregate/grain fractions, aiming at investigating the living forms of M. vaginatus in biocrusts at fine scale, and exploring its roles in aggregate structure and ecological functions of biocrusts. The results showed that two distinct living forms of M. vaginatus had been identified from the biocrusts. The non-bundling M. vaginatus was mainly distributed in the fractions of > 0.5 mm, forming aggregate structure by cementing sand particles firmly; while the bundling M. vaginatus, distributed mainly among the free sand particles with diameter < 0.5 mm, and easily migrated up to biocrust surface after hydration. Furthermore, the aggregate structure formed by non-bundling M. vaginatus supported a higher biomass, nutrient contents, and enzyme activities. Altogether, our results suggest that the strong migrating ability of bundling M. vaginatus contributes to the environmental adaptation and light resource acquirement, while non-bundling M. vaginatus acts as the constructor of the aggregate structure in biocrusts.


Asunto(s)
Cianobacterias , Arena , Biomasa , Microbiología del Suelo , Ecosistema , Suelo
10.
Sci Total Environ ; 876: 163208, 2023 Jun 10.
Artículo en Inglés | MEDLINE | ID: mdl-37011695

RESUMEN

Non-ferrous metal mining activities are known to cause ecological irreversible damage in the tailings and surrounding areas as well as heavy metal (HM) contamination. The enhancement of Chlorella-montmorillonite interaction on the remediation of HM contaminated tailings was verified from the lab to the tailings in Daye City, Hubei Province, China. The results showed a positive correlation between the quantity of montmorillonite and the transformation of Pb and Cu into residual and carbonate-binding states, which resulted in a considerable decrease in the leaching ratio. The buildup of tailings fertility throughout this process benefited from montmorillonite's ability to buffer environmental changes and store water. This further offers a required environmental foundation for the rebuilding of microbial community and the growth of herbaceous plants. The structural equation model demonstrated that the interaction between Chlorella and montmorillonite directly affected the stability of HM, and that this interaction also had an impact on the accumulation of organic carbon, total nitrogen, and available phosphorus, which improved the immobilization of Pb, Cu, Cd, and Zn. This work made the first attempt to apply Chlorella-montmorillonite composite to in-situ tailings remediation, and proposed that the combination of inorganic clay minerals and organic microorganisms was an eco-friendly, long-lasting, and efficient method for immobilizing multiple-HMs in mining areas.


Asunto(s)
Chlorella , Metales Pesados , Contaminantes del Suelo , Bentonita , Plomo , Contaminantes del Suelo/análisis , Metales Pesados/análisis , Suelo
11.
Materials (Basel) ; 16(4)2023 Feb 13.
Artículo en Inglés | MEDLINE | ID: mdl-36837181

RESUMEN

Alkali fusion of granite sawdust at a high alkali dosage can significantly improve geopolymerization activity, but also result in a high alkali consumption and a poor geopolymer performance. In this work, quartz, the most inert component in granite sawdust, was selected to explore the effect of low-alkali activation on its reactivity and the compressive strength of geopolymer. It was found that the amount of activated quartz is mainly determined by the amount of alkali used for activation. The surface of a quartz particle can be effectively activated by an alkali fusion process at a low alkali dosage of 5%. The metakaolin-based geopolymer synthesized with quartz activated by an alkali dosage of 5% shows a high compressive strength of 41 MPa, which can be attributed to the enhanced interfacial interaction between quartz and the geopolymer gel, suggesting that low-alkali activation is a potential way to improve the geopolymerization ability of granite sawdust.

12.
J Hazard Mater ; 443(Pt B): 130243, 2023 02 05.
Artículo en Inglés | MEDLINE | ID: mdl-36308883

RESUMEN

In this study, high-phosphorus beared microalgae was prepared by cultivating modification in high-phosphorus culture, and used for the enhanced Cd(II) biomineralization in soil. Batch experiment results showed that Chlorella sorokiniana FK was modified successfully in highly phosphate culture. Both intracellular P (Poly-P, 29.7 mg/kg) and surface P (phosphoryl based functional groups, 3.7 mol/kg) were greatly enhanced, and the Cd(II) removal capacity surged to 45.98 mg/g at equilibrium in the Langmuir simulation. The EXAFS analysis indicated that Cd tended to form a more stable bidentate complex (RPO4)2Cd when bounding with phosphate groups on the surface of the high-phosphorus microalgae. Moreover, high-phosphorus beared microalgae not only had higher immobilization amount of Cd(II), but also promoted immobilized Cd from adsorbed state to mineralized state. After high-phosphate cultured, increased density of P-related groups provided more adsorption sites, while the decomposition of intracellular Poly-P released phosphate ions into cell surface microenvironment, which combined and promoted the formation of Cd3(PO4)2/Cd(H2PO4)2 on cell surface. Cd-contaminated soil remediation experiments applying high-surface-phosphate beared microalgae further showed that more Cd stabilized as a residue fraction within 49 days. This study proposes that the high-phosphate culture strategy is a good way to improve the immobilization of heavy metals in soil induced by microorganisms.


Asunto(s)
Chlorella , Microalgas , Contaminantes del Suelo , Fósforo , Cadmio/química , Biomineralización , Suelo/química , Contaminantes del Suelo/análisis , Fosfatos/química
13.
PLoS One ; 17(8): e0272841, 2022.
Artículo en Inglés | MEDLINE | ID: mdl-36006964

RESUMEN

Escherichia coli as water-borne bacteria exists in the recirculation water of coal flotation and affects the recovery of coal flotation. In order to study the effect of Escherichia coli on coal flotation, we changed the concentration of Escherichia coli and pH in the coal flotation system and found that Escherichia coli had an adverse effect on coal flotation. The concentration of Escherichia coli was negatively correlated with the recovery of coal. When the concentration of Escherichia coli reached 5.0 × 109 cells/ml, the recovery of coal flotation was 50.25%, and the change of pH basically did not affect the adverse effect of Escherichia coli on coal flotation. The mechanism was studied through Zeta potential, Fourier transform infrared spectroscopy, Scanning electron microscopy and Contact angle measurements. The results revealed that Escherichia coli could be adsorbed to the coal surface by hydrogen bonding, which changed the hydrophobicity of the coal surface and then reduced the recovery of coal flotation.


Asunto(s)
Carbón Mineral , Escherichia coli , Carbón Mineral/análisis , Microscopía Electrónica de Rastreo , Espectroscopía Infrarroja por Transformada de Fourier , Agua
14.
ChemSusChem ; 15(20): e202201532, 2022 Oct 21.
Artículo en Inglés | MEDLINE | ID: mdl-35999180

RESUMEN

Large-current-density electrocatalytic water splitting is essential for industrial hydrogen production, but it is currently hindered by lacking active and robust hydrogen evolution reaction (HER) catalysts. Herein, a novel electrode of hollow nanowire arrays constructed by NiCo modified RuO2 nanoparticles on Ni foam (NiCo@RuO2 HNAs/NF) for high-performance HER was reported. Such efficient electrode was fabricated by ion exchange with NF-supported Ni modified cobalt carbonate hydroxide nanowire arrays template (Ni@CoCH NAs/NF). The formed NiCo@RuO2 HNAs/NF only needed overpotentials of 148.5 and 236.1 mV to deliver 500 and 1000 mA cm-2 , respectively, along with excellent stability at the high-current-density for 300 h. Such remarkable HER performance was mainly attributed to the hollow structure with high surface area, hydrophilic feature, and NiCo@RuO2 with optimized hydrogen evolution kinetics. After coupling with anodic Ni@CoCH NAs/NF, our electrolyzer outperformed Pt/C-IrO2 and most other Ru-based electrolyzers. This work provides a promising Pt alternative catalyst for profitable H2 production.

15.
Small ; 18(37): e2203710, 2022 Sep.
Artículo en Inglés | MEDLINE | ID: mdl-35961949

RESUMEN

Developing FeOOH as a robust electrocatalyst for high output oxygen evolution reaction (OER) remains challenging due to its low conductivity and dissolvability in alkaline conditions. Herein, it is demonstrated that the robust and high output Zn doped NiOOH-FeOOH (Zn-Fex Ni(1-x) )OOH catalyst can be derived by electro-oxidation-induced reconstruction from the pre-electrocatalyst of Zn modified Ni metal/FeOOH film supported by nickel foam (NF). In situ Raman and ex situ characterizations elucidate that the pre-electrocatalyst undergoes dynamic reconstruction occurring on both the catalyst surface and underneath metal support during the OER process. That involves the Fe dissolution-redeposition and the merge of Zn doped FeOOH with in situ generated NiOOH from NF support and NiZn alloy nanoparticles. Benefiting from the Zn doping and the covalence interaction of FeOOH-NiOOH, the reconstructed electrode shows superior corrosion resistance, and enhanced catalytic activity as well as bonding force at the catalyst-support interface. Together with the feature of superaerophobic surface, the reconstructed electrode only requires an overpotential of 330 mV at a high-current-density of 1000 mA cm-2 and maintains 97% of its initial activity after 1000 h. This work provides an in-depth understanding of electrocatalyst reconstruction during the OER process, which facilitates the design of high-performance OER catalysts.

16.
Environ Sci Technol ; 56(16): 11614-11624, 2022 08 16.
Artículo en Inglés | MEDLINE | ID: mdl-35900075

RESUMEN

Limited studies have attempted to evaluate pharmaceutical removal during the sidestream partial nitritation (PN) process. In this work, atenolol biodegradation by PN cultures was investigated by maintaining ammonium and pH at different levels. For the first time, free nitrous acid (FNA), other than ammonium, pH, and free ammonia, was demonstrated to inhibit atenolol removal, with biodegradation efficiencies of ∼98, ∼67, and ∼28% within 6 days at average FNA levels of 0, 0.03, and 0.19 mg-N L-1, respectively. Ammonia-oxidizing bacteria (AOB)-induced metabolism was predominant despite varying FNA concentrations. In the absence of ammonium/FNA, atenolol was mostly biodegraded via AOB-induced metabolism (65%) and heterotroph-induced metabolism (33%). AOB-induced metabolism was largely inhibited (down to 29%) at 0.03 mg-N L-1 FNA, while ∼27 and ∼11% were degraded via heterotroph-induced metabolism and AOB-induced cometabolism, respectively. Higher FNA (0.19 mg-N L-1) substantially reduced atenolol biodegradation via heterotroph-induced metabolism (4%), AOB-induced metabolism (16%), and AOB-induced cometabolism (8%). Newly identified products and pathways were related to metabolic types and FNA levels: (i) deamination and decarbonylation (AOB-induced cometabolism, 0.03 mg-N L-1 FNA); (ii) deamination from atenolol acid (heterotrophic biodegradation); and (iii) nitro-substitution (reaction with nitrite). This suggests limiting FNA to realize simultaneous nitrogen and pharmaceutical removal during the sidestream process.


Asunto(s)
Compuestos de Amonio , Ácido Nitroso , Amoníaco/metabolismo , Compuestos de Amonio/metabolismo , Atenolol/metabolismo , Bacterias/metabolismo , Reactores Biológicos/microbiología , Nitritos/metabolismo , Oxidación-Reducción , Preparaciones Farmacéuticas/metabolismo , Aguas del Alcantarillado
17.
Langmuir ; 38(26): 8054-8064, 2022 Jul 05.
Artículo en Inglés | MEDLINE | ID: mdl-35734859

RESUMEN

Gold recovery from thiosulfate leaching solution Au(S2O3)23- is regarded as a tough task because of the low efficiency and complex procedure in current technology, which hindered the industrial application of this eco-friendly technique. In this work, a MoS2@activated alumina bead composite (MoS2@AA) was constructed through a simple hydrothermal anchoring method and served as a catalyst to recover gold from Au(S2O3)23- solution for the first time. The microstructure and chemical component of MoS2@AA were systematically analyzed. In addition, batch experiments were carried out to explore the recovery behavior of Au(S2O3)23- (concentration: 10 to 200 ppm). Ascribing to the extraordinary optical property of MoS2@AA, Au(S2O3)23- could be directly reduced to Au0 by photogenerated electrons and then form a two-phase interface of gold/MoS2@AA. As a result, the recovery of Au(S2O3)23- can reach up to 98% on MoS2@AA, which was much higher than traditional methods. More importantly, the reduced Au0 could be desorbed from MoS2@AA through a supersonic method, achieving one-step Au0 recovery from Au(S2O3)23-. This novel strategy used in this research has great significance to the development of Au(S2O3)23- recovery in the future.

18.
Environ Sci Pollut Res Int ; 29(45): 68555-68563, 2022 Sep.
Artículo en Inglés | MEDLINE | ID: mdl-35545743

RESUMEN

Coagulation with aluminum salts is an important method for fluoride removal from groundwater. However, the hydration of aluminum salts generating a large number of H+ usually leads to limited defluorination performance due to the optimum pH of active aluminum phase for fluoride removal around 5.5-6.5. In this work, enhanced fluoride removal from groundwater through precise regulation of active aluminum phase by CaCO3 was investigated. Precipitation products were characterized by XPS, FTIR, XRD, and SEM, respectively, and the mechanism of the high fluoride removal efficiency was discussed and compared with the traditional coagulation of Al2(SO4)3. In the Al2(SO4)3 + CaCO3 (ASCC) system, CaCO3 can stably regulate the pH at the optimum range for active aluminum phase existence and has the best fluoride removal effect. CaCO3 accurately regulated the activity of the aluminum phase by slowly releasing OH- and fine tuning pH, thereby achieving effective fluoride removal. Undissolved CaCO3 particles exist as the carrier of defluorination flocs to accelerate precipitation and improve stability. The work here provides a new method for fluoride removal and may shed light on the application of CaCO3 coagulants for other pollutants.


Asunto(s)
Agua Subterránea , Contaminantes Químicos del Agua , Purificación del Agua , Aluminio/química , Fluoruros/análisis , Agua Subterránea/química , Sales (Química) , Agua , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos
19.
Front Microbiol ; 13: 811039, 2022.
Artículo en Inglés | MEDLINE | ID: mdl-35464943

RESUMEN

As the critical ecological engineers, biological soil crusts (biocrusts) are considered to play essential roles in improving substrate conditions during ecological rehabilitation processes. Physical disturbance, however, often leads to the degradation of biocrusts, and it remains unclear how the physical disturbance affects biocrust microorganisms and their related metabolism. In this study, the photosynthetic biomass (indicated by chlorophyll a), nutrients, enzyme activities, and bacterial communities of biocrusts were investigated in a gold mine tailing of Central China to evaluate the impact of physical disturbance on biocrusts during the rehabilitation process of gold mine tailings. The results show that physical disturbance significantly reduced the photosynthetic biomass, nutrient contents (organic carbon, ammonium nitrogen, nitrate nitrogen, and total phosphorus), and enzyme activities (ß-glucosidase, sucrase, nitrogenase, neutral phosphatase, and urease) of biocrusts in the mine tailings. Furthermore, 16S rDNA sequencing showed that physical disturbance strongly changed the composition, structure, and interactions of the bacterial community, leading to a shift from a cyanobacteria dominated community to a heterotrophic bacteria (proteobacteria, actinobacteria, and acidobacteria) dominated community and a more complex bacterial network (higher complexity, nodes, and edges). Altogether, our results show that the biocrusts dominated by cyanobacteria could also develop in the tailings of humid region, and the dominants (e.g., Microcoleus) were the same as those from dryland biocrusts; nevertheless, physical disturbance significantly reduced cyanobacterial relative abundance in biocrusts. Based on our findings, we propose the future work on cyanobacterial inoculation (e.g., Microcoleus), which is expected to promote substrate metabolism and accumulation, ultimately accelerating the development of biocrusts and the subsequent ecological restoration of tailings.

20.
ACS Nano ; 16(3): 4930-4939, 2022 Mar 22.
Artículo en Inglés | MEDLINE | ID: mdl-35171573

RESUMEN

Various kinds of clays occur naturally and are accompanied by particular cations in their interlayer domains. Here we report the reassembled membranes with nanofluidic channel arrays by using the natural clays montmorillonite, mica, and vermiculite, which were imparted with the natural selectivity for realizing precise recognition and directional regulation of the naturally occurring interlayer cations. A typical surface-governed ionic transport behavior was observed in the clay nanofluidic channels. Through asymmetric structural modification, cationic current rectification was realized in montmorillonite channels that performed as a nanofluidic diode. Interestingly, in the mica nanofluidic channel, the K+ that was naturally occurring in the interlayer domain of mica showed a reciprocating motion and resulted in a periodically fluctuating current. Electrodialysis demonstrated that such a fluctuating current reflects a directional selectivity for K+, achieving at least a 6000 times permeation rate difference with Li+ ions. The specific selectivity for Li+/Mg2+ on vermiculite reached up to 856 times with similar cations by the current technique. As-obtained clay membranes possess application prospects in energy conversion, brine resource development, etc. Such a strategy can achieve the designed selectivity through systematic screening of the building blocks, thus imparting them with the inherent characteristics of natural clays, which provides an alternative solution to the present manufacture of selective membranes.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...