RESUMEN
Post-operative chemotherapy is still required for the treatment of glioblastoma (GBM), for which nanocarrier-based drug delivery has been identified as one of the most effective methods. However, the blood-brain barrier (BBB) and non-specific delivery to non-tumor tissues can significantly limit drug accumulation in tumor tissues and cause damage to nearby normal tissues. This study describes a targeted cancer therapy approach that uses AS1411 aptamer-conjugated nanospheres (100-300 nm in size) loaded with doxorubicin (Dox) to selectively identify tumor cells overexpressing nucleolin (NCL) proteins. The study demonstrates that the active target model, which employs aptamer-mediated drug delivery, is more effective than non-specific enhanced permeability and maintenance (EPR)-mediated delivery and passive drug delivery in improving drug penetration and maintenance in tumor cells. Additionally, the study reveals the potential for anti-cancer effects through 3D spheroidal and in vivo GBM xenograft models. The DNA-protein hybrid nanospheres utilized in this study offer numerous benefits, such as efficient synthesis, structural stability, high drug loading, dye labeling, biocompatibility, and biodegradability. When combined with nanospheres, the 1411 aptamer has been shown to be an effective drug delivery carrier allowing for the precise targeting of tumors. This combination has the potential to produce anti-tumor effects in the active targeted therapy of GBM.
RESUMEN
A triboelectric nanogenerator (TENG) is an energy generator that converts mechanical energy into electrical energy using triboelectricity at a nanoscale. Given their potential application as power sources in electronic devices, various attempts have been made to improve their output performance. Here, we present an eco-friendly, low-cost, and facile fabrication method to enhance TENG characteristics with keratin protein additives. Keratin sources, human and cat hair, are processed into powder and added to the friction layer, which increases their positive charge affinity, thereby boosting the output performance of the TENG. The output performances of the keratin-added TENG (K-TENG) are measured in the vertical contact-separation mode, with both additives having the highest output values at 5 wt % load. The K-TENG generates more output voltage and current values than the pristine TENG by 90 and 208%, respectively. Hence, we conclude that this method would potentially promote TENG as a strong candidate for a competitive "green" energy harvesting device in future electronics applications.
Asunto(s)
Queratinas , Polímeros , Humanos , Citoesqueleto , Suministros de Energía Eléctrica , ElectrónicaRESUMEN
Efficient plasma-membrane expression is critical for genetically encoded voltage indicators (GEVIs). To improve the plasma-membrane expression, we introduced multiple combinations of plasma-membrane trafficking motifs at different positions to members of the Bongwoori family of GEVIs. An improvement from 20% to 27% in the ΔF/F/100 mV depolarization of the plasma membrane was observed when a Golgi transport motif was inserted near the N-terminus in conjunction with an endoplasmic reticulum release motif near the C-terminus of the protein. Unfortunately, this variant was also slower. The weighted tau on of the variant (25 ms) was more than double the original construct (11 ms). The weighted tau off was >20 ms compared with 10 ms for the original GEVI. The voltage range of the GEVI was also shifted to more negative potentials. Insertion of spacer amino acids between the fluorescent-protein domain and the endoplasmic reticulum release motif at the C-terminus rescued the speed of both the tau on and tau off while restoring the voltage range and maintaining the improved voltage-dependent optical signal. These results suggest that while trafficking motifs do improve plasma-membrane expression, they may also mediate persistent associations that affect the functioning of the protein.
RESUMEN
We developed hybrid nanospheres comprised of two of the most important biomolecules in nature, DNA and proteins, which have excellent biocompatibility, high drug payload capacity, in vivo imaging ability, and in vitro/in vivo cancer targeting capability. The synthesis can be done in a facile one-pot assembly system that includes three steps: step-growth polymerization of two DNA oligomers, addition of streptavidin to assemble spherical hybrid nanostructures, and functionalization of hybrid nanospheres with biotinylated aptamers. To test the feasibility of cancer targeting and drug-loading capacity of the hybrid nanospheres, MUC1-specific aptamers (MA3) were conjugated to nanosphere surfaces (apt-nanospheres), and doxorubicin (Dox) was loaded into nanospheres by DNA intercalation. The successful construction of nanospheres and apt-nanospheres was confirmed by agarose gel electrophoresis and dynamic light scattering (DLS). Their uniform spherical morphology was confirmed by transmission electron microscopy (TEM). Fluorescence spectra of nanospheres demonstrated high Dox-loading capability and slow-release characteristics. In vitro MUC1-specific binding of the apt-nanospheres was confirmed by flow cytometry and confocal microscopy. Dox-loaded apt-nanospheres significantly increased cytotoxicity of the MUC1-positive cancer cells due to aptamer-mediated selective internalization, as shown via cell viability assays. Apt-nanospheres could also be imaged in vivo through the synthesis of hybrid nanospheres using fluorescent dye-conjugated DNA strands. Finally, in vivo specific targeting ability of apt-nanospheres was confirmed in a MUC1-positive 4T1 tumor-bearing mouse model, whereas apt-nanospheres did not cause any sign of systemic toxicity in normal mice. Taken together, our self-assembled DNA-streptavidin hybrid nanospheres show promise as a biocompatible cancer targeting material for contemporary nanomedical technology.
Asunto(s)
Aptámeros de Nucleótidos , Nanosferas , Neoplasias , Animales , Aptámeros de Nucleótidos/química , Línea Celular Tumoral , ADN/química , Doxorrubicina/farmacología , Doxorrubicina/uso terapéutico , Portadores de Fármacos/química , Ratones , Nanosferas/química , Nanosferas/uso terapéutico , EstreptavidinaRESUMEN
Composites based on carbon nanotubes (CNTs) are promising patternable materials that can be engineered to incorporate the outstanding properties of CNTs into various applications via printing technologies. However, conventional printing methods for CNTs require further improvement to overcome the major drawbacks that limit the patterning resolution and target substrate. Herein, an intaglio contact printing method based on a CNT/paraffin composite is presented for realizing highly precise CNT network patterns without restrictions on the substrate. In this method, the CNT/paraffin composite can be patterned with a high resolution (<10 µm) and neatly transferred onto various substrates with a wide range of surface energies, including human skin. The patterned composite exhibits high durability against structural deformations, and structural damage caused by fatigue accumulation can be cured in a few seconds. In addition, miniaturized sensing and energy-harvesting applications are demonstrated with high performances. The present method facilitates the rapid fabrication of highly precise interdigitated electrodes via one-step printing, enabling high-performance operation and miniaturization of the devices. It is anticipated that these results will not only spur the further development of various applications of CNTs but also contribute to advances in soft lithography methods applicable to many fields of science and engineering.
Asunto(s)
Nanotubos de Carbono , Electrodos , Humanos , Nanotubos de Carbono/química , Impresión TridimensionalRESUMEN
Ensembles of autonomous, spatially distributed wireless stimulators can offer a versatile approach to patterned microstimulation of biological circuits such as the cortex. Here, we demonstrate the concept of a distributed, untethered, and addressable microstimulator, integrating an ultraminiaturized ASIC with a custom-designed GaAs photovoltaic (PV) microscale energy harvester, dubbed as an "optical neurograin (ONG)". An on-board Manchester-encoded near-infrared downlink delivers incident IR power and provides a synchronous clock across an ensemble of microdevices, triggering stimulus events by remote command. Each ONG has a unique device address and, when an incoming downlink bit sequence matches with this device identification (ID), the implant delivers a charge-balanced current stimulus to the target cortex. Present devices use 7-bit metal fuses fabricated during the CMOS process for their device ID, laser-scribed in post-processing, allowing in principle for a stimulator network of up to 128 nodes. We have characterized small ensembles of ONGs and shown a proof of concept of the system both on benchtop and in vivo rat rodent model.
Asunto(s)
Luz , Prótesis e Implantes , Animales , RatasRESUMEN
A number of research attempts to understand and modulate sensory and motor skills that are beyond the capability of humans have been underway. They have mainly been expounded in rodent models, where numerous reports of controlling movement to reach target locations by brain stimulation have been achieved. However, in the case of birds, although basic research on movement control has been conducted, the brain nuclei that are triggering these movements have yet to be established. In order to fully control flight navigation in birds, the basic central nervous system involved in flight behavior should be understood comprehensively, and functional maps of the birds' brains to study the possibility of flight control need to be clarified. Here, we established a stable stereotactic surgery to implant multi-wire electrode arrays and electrically stimulated several nuclei of the pigeon's brain. A multi-channel electrode array and a wireless stimulation system were implanted in thirteen pigeons. The pigeons' flight trajectories on electrical stimulation of the cerebral nuclei were monitored and analyzed by a 3D motion tracking program to evaluate the behavioral change, and the exact stimulation site in the brain was confirmed by the postmortem histological examination. Among them, five pigeons were able to induce right and left body turns by stimulating the nuclei of the tractus occipito-mesencephalicus (OM), nucleus taeniae (TN), or nucleus rotundus (RT); the nuclei of tractus septo-mesencephalicus (TSM) or archistriatum ventrale (AV) were stimulated to induce flight aviation for flapping and take-off with five pigeons.
RESUMEN
Retinal prostheses substitute the functionality of damaged photoreceptors by electrically stimulating retinal ganglion cells (RGCs). RGCs, densely packed in a small region, needs a high spatial resolution of the microelectrode, which in turn raises its impedance. Therefore, the high output impedance circuit and the high compliance output voltage are the key characteristics of the current-source-based stimulator. Also, as the system is intended to implant in the retina, the stimulation parameter should be optimized for efficiency and safety. Here we designed 8-channel neural stimulator customized to the retinal ganglion cell. Designed IC is fabricated in the TSMC 0.18 µm 1P6M RF CMOS process with 3.3 V supply voltage, occupying the 1060 µm×950 µm area.
Asunto(s)
Prótesis Visuales , Impedancia Eléctrica , MicroelectrodosRESUMEN
Implantable active electronic microchips are being developed as multinode in-body sensors and actuators. There is a need to develop high throughput microfabrication techniques applicable to complementary metal-oxide-semiconductor (CMOS)-based silicon electronics in order to process bare dies from a foundry to physiologically compatible implant ensembles. Post-processing of a miniature CMOS chip by usual methods is challenging as the typically sub-mm size small dies are hard to handle and not readily compatible with the standard microfabrication, e.g., photolithography. Here, we present a soft material-based, low chemical and mechanical stress, scalable microchip post-CMOS processing method that enables photolithography and electron-beam deposition on hundreds of micrometers scale dies. The technique builds on the use of a polydimethylsiloxane (PDMS) carrier substrate, in which the CMOS chips were embedded and precisely aligned, thereby enabling batch post-processing without complication from additional micromachining or chip treatments. We have demonstrated our technique with 650 µm × 650 µm and 280 µm × 280 µm chips, designed for electrophysiological neural recording and microstimulation implants by monolithic integration of patterned gold and PEDOT:PSS electrodes on the chips and assessed their electrical properties. The functionality of the post-processed chips was verified in saline, and ex vivo experiments using wireless power and data link, to demonstrate the recording and stimulation performance of the microscale electrode interfaces.
RESUMEN
Here, we report genetically encoded AviTag conjugating system for Channelrhodopsin-2(ChR2) in order to attach various nanostructures to the membrane protein in a cell type specific manner. First, AviTag peptide sequence is cloned to N-terminal site of ChR2 construct and expressed at the membrane of primary-cultured hippocampal neurons via lentiviral transduction. Second, with the help of BirA enzyme and ATP, biotin coated quantum dots (Qdots) and streptavidin (SAv) coated Qdots are successfully bound to AviTag sites at the membrane where ChR2 is located and confirmed by fluorescence imaging. Moreover, we synthesize biotinylated Traptavidin-DNA conjugate probes containing a desthio-biotin that has weaker affinity than a regular biotin, and successfully exchange them with pre-conjugated Biotin-AviTag-ChR2 site at the membrane of neuronal cells which can potentially solve the crosslinking issue of Avidin linked probes. Therefore, we expect the AviTag-ChR2 fusion platform to become a great tool for incorporating various nanostructures at the specific sites of a cellular membrane in order to overcome the limits of optogenetic opsins.
Asunto(s)
Channelrhodopsins/genética , Neuronas/metabolismo , Opsinas/genética , Optogenética/métodos , Puntos Cuánticos/química , Animales , Biotinilación , Células Cultivadas , Channelrhodopsins/química , Neuronas/citología , Opsinas/química , Péptidos/química , Péptidos/genética , Ratas Sprague-Dawley , Proteínas Recombinantes de Fusión/química , Proteínas Recombinantes de Fusión/genética , Transducción GenéticaRESUMEN
OBJECTIVE: The authors' goal was to study avian motor brain mapping via wireless stimulation to induce certain behaviors. In this paper, the authors propose an electrode design that is suitable for avian brain stimulation as well as a stereotactic implant procedure for the proposed electrode. METHODS: An appropriate breed for avian brain study was chosen. A fully implantable remote-controlled electrical stimulation system was inserted to minimize discomfort. A suitable electrode design and stereotactic surgery method based on the electrode design were investigated. RESULTS: Using a wireless stimulation system, flapping and rotation behaviors were induced by stimulating the ventral part of the nucleus intercollicularis and formatio reticularis medialis mesencephali both on the ground and during flight. CONCLUSIONS: The authors were able to implant the entire brain stimulation system inside the avian body without any surgical complications. Postoperative observations suggested that the bird did not find the implant uncomfortable.
Asunto(s)
Encéfalo/fisiología , Encéfalo/cirugía , Estimulación Encefálica Profunda , Técnicas Estereotáxicas , Animales , Aves , Mapeo Encefálico/métodos , Estimulación Encefálica Profunda/métodos , Estimulación Eléctrica/métodos , Electrodos Implantados , Humanos , Imagenología TridimensionalRESUMEN
BACKGROUND: Animal learning based on brain stimulation is an application in a brain-computer interface. Especially for birds, such a stimulation system should be sufficiently light without interfering with movements of wings. OBJECTIVE: We proposed a fully-implantable system for wirelessly navigating a pigeon. In this paper, we report a handheld neural stimulation controller for this avian navigation guided by remote control. METHODS: The handheld controller employs ZigBee to control pigeon's behaviors through brain stimulation. ZigBee can manipulate brain stimulation remotely while powered by batteries. Additionally, simple switches enable users to customize parameters of stimuli like a gamepad. These handheld and user-friendly interfaces make it easy to use the controller while a pigeon flies in open areas. RESULTS: An electrode was inserted into a nucleus (formatio reticularis medialis mesencephalic) of a pigeon and connected to a stimulator fully-implanted in the pigeon's back. Receiving signals sent from the controller, the stimulator supplied biphasic pulses with a duration of 0.080 ms and an amplitude of 0.400 mA to the nucleus. When the nucleus was stimulated, a 180-degree turning-left behavior of the pigeon was consistently observed. CONCLUSIONS: The feasibility of remote avian navigation using the controller was successfully verified.
Asunto(s)
Computadoras de Mano , Electrodos Implantados/veterinaria , Vuelo Animal/fisiología , Orientación Espacial/fisiología , Tecnología Inalámbrica/instrumentación , Animales , Interfaces Cerebro-Computador , Columbidae/fisiología , Suministros de Energía Eléctrica , Estimulación Eléctrica , Electrodos , Diseño de Equipo , Estudios de Factibilidad , Sistemas de Información Geográfica/instrumentación , Tecnología de Sensores Remotos/instrumentación , Tecnología de Sensores Remotos/veterinaria , Robótica/instrumentación , Robótica/métodos , Navegación Espacial/fisiologíaRESUMEN
Genetically-encoded indicators of neuronal activity enable the labeling of a genetically defined population of neurons to optically monitor their activities. However, researchers often find difficulties in identifying relevant signals from excessive background fluorescence. A photoactivatable version of a genetically encoded calcium indicator, sPA-GCaMP6f is a good example of circumventing such an obstacle by limiting the fluorescence to a region of interest defined by the user. Here, we apply this strategy to genetically encoded voltage (GEVI) and pH (GEPI) indicators. Three photoactivatable GEVI candidates were considered. The first one used a circularly-permuted fluorescent protein, the second design involved a Förster resonance energy transfer (FRET) pair, and the third approach employed a pH-sensitive variant of GFP, ecliptic pHluorin. The candidate with a variant of ecliptic pHluorin exhibited photoactivation and a voltage-dependent fluorescence change. This effort also yielded a pH-sensitive photoactivatable GFP that varies its brightness in response to intracellular pH changes.
RESUMEN
Here, we explore the extended utility of two important functional biomolecules, DNA and protein, by hybridizing them through avidin-biotin conjugation. We report a simple yet scalable technique of successive magnetic separations to synthesize traptavidin-DNA conjugates with four distinct DNA binding sites that can be used as a supramolecular building block for programmable assembly of nanostructures. Using this nanoassembly platform, we fabricate several different plasmonic nanostructures with various metallic as well as semiconductor nanoparticles in predetermined ways. We also use the platform to construct dendrimer nanostructures using valency-controlled traptavidin-DNA conjugates in a programmable manner. These results suggest that our protein-DNA supramolecular building blocks would make a significant contribution to the assembly of multicomponent and complex nanostructures for numerous contemporary and future applications from molecular imaging to drug delivery.
Asunto(s)
ADN/química , Nanoestructuras/química , Estreptavidina/química , Oro/química , Tamaño de la Partícula , Plata/química , Propiedades de SuperficieRESUMEN
Navigation of freely moving animals has been studied for potential application to emergency situations and hazardous environments. A fully implantable stimulation system for remote animal navigation was proposed and applied to living pigeons. The animal navigation system, consisting of an external controller and a neural stimulator, was designed based on the anatomy of the pigeons. Depth electrodes were fabricated based on the anatomy of target pigeon brain regions. The fabricated neural stimulators received data wirelessly from the external controller and generated biphasic current pulses with preset parameters of amplitude, duration, and rate. The average impedance of the fabricated electrodes was 12.0â -13.05° kΩ at 1 kHz. The neural stimulator was implanted on the dorsal side, and the depth electrodes were inserted into the formatio reticularis medialis mesencephali (FRM). When successive current pulses with an amplitude of 400 µA, a rate of 58 Hz, and a duration of 80 µs were applied to the target regions at 0.85 s intervals, turning/circling behaviors were induced for 6.2 s. The feasibility of the proposed wireless stimulation system was demonstrated in vivo.
Asunto(s)
Columbidae , Estimulación Eléctrica , Electrodos Implantados , Tecnología Inalámbrica , Animales , Encéfalo , Impedancia EléctricaRESUMEN
Scalability of implantable neural interface devices is a critical bottleneck in enhancing the performance of cortical Brain-Computer Interfaces (BCIs) through access to high density and multi-areal cortical signals. This is challenging to achieve through current monolithic constructs with 100-200 channels, often with bulky tethering and packaging, and a spatially distributed sensor approach has recently been explored by a few groups, including our laboratories [1]. In this paper, we describe a microscale (500 µm) programmable neural stimulator in the context of an epicortical wireless networked system of sub-mm "Neurograins" with wireless energy harvesting (near 1 GHz) and bidirectional telemetry. Stimulation neurograins are post-processed to integrate poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) planar electrodes or intracortical penetrating microwires, and ensembles of microdevices are hermetically encapsulated using liquid-crystal polymer (LCP) thermocompression for chronic implantability. Radio-frequency power and telecommunications management are handled by a wearable external "Epidermal Skinpatch" unit to cater to chronic clinical implant considerations. We describe the stimulation neurograin performance specifications and proof-of-concept in bench top and ex vivo rodent platforms.
Asunto(s)
Interfaces Cerebro-Computador , Tecnología Inalámbrica , Electrodos , Prótesis e Implantes , Ondas de Radio , TelemetríaRESUMEN
This paper describes the electrical modulation of locomotion in pigeons using deep brain electrodes. Polymer-based depth electrodes with four channels were fabricated. Based on the location of the nucleus intercollicularis (ICo), the shanks of the depth electrodes were designed to be a length of 11 mm. After the implantation of the depth electrode into the ICo region of the brain, it was connected by wires to a custom-made stimulator, and biphasic current pulses were delivered. Current pulses with an amplitude of 0.5 mA, a rate of 58.0 Hz, and a duration of $320\mu \mathrm{s} $s were applied for 0.5 s. When the ICo region was electrically stimulated, taking-off behavior was successfully induced for 0.4 s. Induction of taking-off behavior by electrical stimulation, when coupled to control of turning and running forward locomotions, may contribute to the development of remote flight-control system of freely moving pigeon.
Asunto(s)
Encéfalo/fisiología , Columbidae/fisiología , Electrodos Implantados , Locomoción , Animales , Estimulación Eléctrica , PolímerosRESUMEN
An improved genetically encoded voltage indicator (GEVI) was achieved by altering the charge composition of the region linking the voltage-sensing domain of the GEVI to a pH-sensitive fluorescent protein. Negatively charged linker segments reduced the voltage-dependent optical signal while positively charged linkers increased the signal size. Arginine scanning mutagenesis of the linker region improved the signal size of the GEVI, Bongwoori, yielding fluorescent signals as high as 20% ΔF/F during the firing of action potentials. The speed of this new sensor was also capable of optically resolving action potentials firing at 65 Hz. This large signal size enabled individual pixels to become surrogate electrodes. Plotting the highest correlated pixels based only on fluorescence changes reproduced the image of the neuron exhibiting activity. Furthermore, the use of a pH-sensitive fluorescent protein facilitated the detection of the acidification of the neuron during the firing of action potentials.
Asunto(s)
Potenciales de la Membrana , Canales Aniónicos Dependientes del Voltaje/genética , Canales Aniónicos Dependientes del Voltaje/metabolismo , Potenciales de Acción , Fenómenos Electrofisiológicos , Expresión Génica , Genes Reporteros , Células HEK293 , Humanos , Microscopía Fluorescente , Neuronas/fisiología , Técnicas de Placa-Clamp , Dominios y Motivos de Interacción de Proteínas , Canales Aniónicos Dependientes del Voltaje/químicaRESUMEN
The anatomical locations and sizes of acupuncture points (APs) are identified in traditional Chinese medicine by using the cun measurement method. More precise knowledge of those locations and sizes to submillimeter precision, along with their cytological characterizations, would provide significant contributions both to scientific investigations and to precise control of the practice of acupuncture. Over recent decades, researchers have come to realize that APs in the skin of rats and humans have more mast cells (MCs) than neighboring nonacupoints. In this work, the distribution of MCs in the ventral skin of mice was studied so that it could be used to infer the locations, depths from the epidermis, and sizes of three putative APs. The umbilicus was taken as the reference point, and a transversal cross section through it was studied. The harvested skins from 8-week-old mice were stained with toluidine blue, and the MCs were recognized by their red-purple stains and their metachromatic granules. The three putative APs, CV 8 and the left and the right KI 16 APs, were identified based on their high densities of MCs. These findings also imply that acupuncture may stimulate, through MCs, an immune response to allergic inflammation.
RESUMEN
Genetically encoded voltage indicators (GEVIs) have improved to the point where they are beginning to be useful for in vivo recordings. While the ultimate goal is to image neuronal activity in vivo, one must be able to image activity of a single cell to ensure successful in vivo preparations. This procedure will describe how to image membrane potential in a single cell to provide a foundation to eventually image in vivo. Here we describe methods for imaging GEVIs consisting of a voltage-sensing domain fused to either a single fluorescent protein (FP) or two fluorescent proteins capable of Förster resonance energy transfer (FRET) in vitro. Using an image splitter enables the projection of images created by two different wavelengths onto the same charge-coupled device (CCD) camera simultaneously. The image splitter positions a second filter cube in the light path. This second filter cube consists of a dichroic and two emission filters to separate the donor and acceptor fluorescent wavelengths depending on the FPs of the GEVI. This setup enables the simultaneous recording of both the acceptor and donor fluorescent partners while the membrane potential is manipulated via whole cell patch clamp configuration. When using a GEVI consisting of a single FP, the second filter cube can be removed allowing the mirrors in the image splitter to project a single image onto the CCD camera.