A view of the Lower to Middle Paleolithic boundary from Northern France, far from the Near East?

Northern France and the Near East play and have played a central role in the debate around the Lower Paleolithic (LP) to Middle Paleolithic (MP) boundary. In the early 1990s, the renewed Saalian record for Northern France began to outline a mosaic model of the LP-to-MP transition-mainly based on Tuffreau's works. It implied the coexistence of Upper Acheulean assemblages (numerous bifaces with few standardized retouched flakes), 'Epi-Acheulean' assemblages (rare bifaces and diversified retouched flakes), and Mousterian assemblages (Levalloisian industries) during the Marine Isotope Stage (MIS) 8-6 period. Since the 2000s, the discovery of new key sites and enhanced field and laboratory methods are challenging this model. We present first a brief historical summary of previous approaches to the LP to MP boundary in Northern France. A large data set of Saalian archaeological units available from previous works has been updated and expanded to include additional sites. This allows us to demonstrate that the current Saalian record from Northern France is both rich and sparse as it is heterogeneously biased through time and space and that these biases limit the accuracy of any attempt to model the LP-to-MP transition. Nevertheless, we describe the differences between pre-MIS 9 and MIS 9 and MIS 8-6 records for lithic industries and discuss whether the current periodization is still relevant considering new data on technological, behavioral, and cultural changes. The comparison between Northern France and Near Eastern records allows regional cultural patterns to be distinguished from global trends in lithic trajectories of change and determination of how they slotted together. Our review of the available data from these two distant regions confirms that the LP-to-MP transition is probably one of the major cultural shifts in human evolution.

A mobile laboratory for ancient DNA analysis.

Mobile devices for on-field DNA analysis have been used for medical diagnostics at the point-of-care, forensic investigations and environmental surveys, but still have to be validated for ancient DNA studies. We report here on a mobile laboratory that we setup using commercially available devices, including a compact real-time PCR machine, and describe procedures to perform DNA extraction and analysis from a variety of archeological samples within 4 hours. The process is carried out on 50 mg samples that are identified at the species level using custom TaqMan real-time PCR assays for mitochondrial DNA fragments. We evaluated the potential of this approach in museums lacking facilities for DNA studies by analyzing samples from the Enlène (MIS 2 layer) and the Portel-Ouest cave (MIS 3 deposits), and also performed experiments during an excavation campaign at the Roc-en-Pail (MIS 5) open-air site. Enlène Bovinae bone samples only yielded DNA for the extinct steppe bison (Bison priscus), whereas Portel-Ouest cave coprolites contained cave hyena (Crocuta crocuta spelaea) DNA together, for some of them, with DNA for the European bison sister species/subspecies (Bison schoetensacki/Bb1-X), thus highlighting the cave hyena diet. Roc-en-Pail Bovinae bone and tooth samples also contained DNA for the Bison schoetensacki/Bb1-X clade, and Cervidae bone samples only yielded reindeer (Rangifer tarandus) DNA. Subsequent DNA sequencing analyses confirmed that correct species identification had been achieved using our TaqMan assays, hence validating these assays for future studies. We conclude that our approach enables the rapid genetic characterization of tens of millennia-old archeological samples and is expected to be useful for the on-site screening of museums and freshly excavated samples for DNA content. Because our mobile laboratory is made up of commercially available instruments, this approach is easily accessible to other investigators.

Neandertals on the beach: Use of marine resources at Grotta dei Moscerini (Latium, Italy).

Excavated in 1949, Grotta dei Moscerini, dated MIS 5 to early MIS 4, is one of two Italian Neandertal sites with a large assemblage of retouched shells (n = 171) from 21 layers. The other occurrence is from the broadly contemporaneous layer L of Grotta del Cavallo in southern Italy (n = 126). Eight other Mousterian sites in Italy and one in Greece also have shell tools but in a very small number. The shell tools are made on valves of the smooth clam Callista chione. The general idea that the valves of Callista chione were collected by Neandertals on the beach after the death of the mollusk is incomplete. At Moscerini 23.9% of the specimens were gathered directly from the sea floor as live animals by skin diving Neandertals. Archaeological data from sites in Italy, France and Spain confirm that shell fishing and fresh water fishing was a common activity of Neandertals, as indicated by anatomical studies recently published by E. Trinkaus. Lithic analysis provides data to show the relation between stone tools and shell tools. Several layers contain pumices derived from volcanic eruptions in the Ischia Island or the Campi Flegrei (prior to the Campanian Ignimbrite mega-eruption). Their rounded edges indicate that they were transported by sea currents to the beach at the base of the Moscerini sequence. Their presence in the occupation layers above the beach is discussed. The most plausible hypothesis is that they were collected by Neandertals. Incontrovertible evidence that Neandertals collected pumices is provided by a cave in Liguria. Use of pumices as abraders is well documented in the Upper Paleolithic. We prove that the exploitation of submerged aquatic resources and the collection of pumices common in the Upper Paleolithic were part of Neandertal behavior well before the arrival of modern humans in Western Europe.

Hafting of Middle Paleolithic tools in Latium (central Italy): New data from Fossellone and Sant'Agostino caves.

Hafting of stone tools was an important advance in the technology of the Paleolithic. Evidence of hafting in the Middle Paleolithic is growing and is not limited to points hafted on spears for thrusting or throwing. This article describes the identification of adhesive used for hafting on a variety of stone tools from two Middle Paleolithic caves in Latium, Fossellone Cave and Sant'Agostino Cave. Analysis of the organic residue by gas chromatography/mass spectrometry shows that a conifer resin adhesive was used, in one case mixed with beeswax. Contrary to previous suggestions that the small Middle Paleolithic tools of Latium could be used by hand and that hafting was not needed since it did not improve their functionality, our evidence shows that hafting was used by Neandertals in central Italy. Ethnographic evidence indicates that resin, which dries when exposed to air, is generally warmed by exposure to a small fire thus softened to be molded and pushed in position in the haft. The use of resin at both sites suggests regular fire use, as confirmed by moderate frequencies of burnt lithics in both assemblages. Lithic analysis shows that hafting was applied to a variety of artifacts, irrespective of type, size and technology. Prior to our study evidence of hafting in the Middle Paleolithic of Italy was limited to one case only.

Early Levallois and the beginning of the Middle Paleolithic in central Italy.

In the second half of the 19th century Pleistocene faunas were discovered in two sites, Sedia del Diavolo and Monte delle Gioie, contained in deposits of the Aniene River in the area of Rome (Latium, Italy). Fieldwork by A.C. Blanc in the late 1930's proved the association of fauna and lithic industry within fluvial deposits interbedded with volcanoclastic layers. A human femoral diaphysis and a metatarsal were later identified in the faunal assemblage from Sedia del Diavolo and evaluated as Neandertal. The lithic assemblages from these two sites were the basis of the definition of the Protopontinian by M. Taschini, which she viewed as a late Middle Pleistocene industry very similar to the later, Upper Pleistocene Pontinian industries, thought to be characteristic of the Latium Mousterian. The chronostratigraphic framework of the Aniene river deposits has been recently updated and the lithic assemblages from these two sites are now confidently dated between 295 and 290 ka, close to the transition from MIS 9 to MIS 8. They fit chronologically between the industries of layers m and d from Torre in Pietra, a site 26 km northwest of Rome. The presence of the Levallois debitage is indisputable yet it occurs within an original technical context, different from what is known in other early occurrences of the Levallois. The date confirms the proposed chronology for the early Levallois in Europe. More importantly these two assemblages demonstrate that this technology can emerge in more diversified contexts than usually described. This suggests that its dispersal in Europe may have been rapid.

The Acheulian and Early Middle Paleolithic in Latium (Italy): Stability and Innovation.

We present here the results of a technological and typological analysis of the Acheulian and early Middle Paleolithic assemblages from Torre in Pietra (Latium, Italy) together with comparisons with the Acheulian small tools of Castel di Guido. The assemblages were never chronometrically dated before. We have now 40Ar/39Ar dates and ESR-U-series dates, within a geomorphological framework, which support correlations to marine isotope stages. The Acheulian (previously correlated to MIS 9) is now dated to MIS 10 while the Middle Paleolithic is dated to MIS 7. Lithic analyses are preceded by taphonomic evaluations. The Levallois method of the Middle Paleolithic assemblage is an innovation characterized by the production of thin flake blanks without cortex. In contrast, the small tool blanks of the Acheulian were either pebbles or thick flakes with some cortex. They provided a relatively easy manual prehension. The choice of Levallois thin flake blanks in the Middle Paleolithic assemblage suggest that the new technology is most likely related to the emergence of hafting. Accordingly, the oldest direct evidence of hafting technology is from the site of Campitello Quarry in Tuscany (Central Italy) where birch-bark tar, found on the proximal part of two flint flakes, is dated to the end of MIS 7. Nevertheless, a peculiar feature of the Middle Paleolithic at Torre in Pietra is the continuous presence of small tool blanks on pebbles and cores and on thick flake albeit at a much lower frequency than in the older Acheulian industries. The adoption of the new technology is thus characterized by innovation combined with a degree of stability. The persistence of these habits in spite of the introduction of an innovative technique underlies the importance of cultural transmission and conformity in the behavior of Neandertals.

The Still Bay and Howiesons Poort at Sibudu and Blombos: Understanding Middle Stone Age Technologies.

The classification of archaeological assemblages in the Middle Stone Age of South Africa in terms of diversity and temporal continuity has significant implications with respect to recent cultural evolutionary models which propose either gradual accumulation or discontinuous, episodic processes for the emergence and diffusion of cultural traits. We present the results of a systematic technological and typological analysis of the Still Bay assemblages from Sibudu and Blombos. A similar approach is used in the analysis of the Howiesons Poort (HP) assemblages from Sibudu seen in comparison with broadly contemporaneous assemblages from Rose Cottage and Klasies River Cave 1A. Using our own and published data from other sites we report on the diversity between stone artifact assemblages and discuss to what extent they can be grouped into homogeneous lithic sets. The gradual evolution of debitage techniques within the Howiesons Poort sequence with a progressive abandonment of the HP technological style argues against the saltational model for its disappearance while the technological differences between the Sibudu and Blombos Still Bay artifacts considerably weaken an interpretation of similarities between the assemblages and their grouping into the same cultural unit. Limited sampling of a fragmented record may explain why simple models of cultural evolution do not seem to apply to a complex reality.

Border Cave and the beginning of the Later Stone Age in South Africa.

The transition from the Middle Stone Age (MSA) to the Later Stone Age (LSA) in South Africa was not associated with the appearance of anatomically modern humans and the extinction of Neandertals, as in the Middle to Upper Paleolithic transition in Western Europe. It has therefore attracted less attention, yet it provides insights into patterns of technological evolution not associated with a new hominin. Data from Border Cave (KwaZulu-Natal) show a strong pattern of technological change at approximately 44-42 ka cal BP, marked by adoption of techniques and materials that were present but scarcely used in the previous MSA, and some novelties. The agent of change was neither a revolution nor the advent of a new species of human. Although most evident in personal ornaments and symbolic markings, the change from one way of living to another was not restricted to aesthetics. Our analysis shows that: (i) at Border Cave two assemblages, dated to 45-49 and >49 ka, show a gradual abandonment of the technology and tool types of the post-Howiesons Poort period and can be considered transitional industries; (ii) the 44-42 ka cal BP assemblages are based on an expedient technology dominated by bipolar knapping, with microliths hafted with pitch from Podocarpus bark, worked suid tusks, ostrich eggshell beads, bone arrowheads, engraved bones, bored stones, and digging sticks; (iii) these assemblages mark the beginning of the LSA in South Africa; (iv) the LSA emerged by internal evolution; and (v) the process of change began sometime after 56 ka.