Metal removal by metallothionein and an acid phosphatase PhoN, surface-displayed on the cells of the extremophile, Deinococcus radiodurans.

The utility of surface layer proteins (Hpi and SlpA) of the radiation resistant bacterium, Deinococcus radiodurans, was investigated for surface display and bioremediation of cadmium and uranium. The smtA gene, from Synechococcus elongatus (encoding the metal binding metallothionein protein), was cloned and over-expressed in D. radiodurans, either as such or as a chimeric gene fused with hpi ORF (Hpi-SmtA), or fused to the nucleotide sequence encoding the SLH domain of the SlpA protein (SLH-SmtA). The expressed fusion proteins localized to the deinococcal cell surface, while the SmtA protein localized to the cytoplasm. Recombinant cells surface-displaying the SLH-SmtA or Hpi-SmtA fusion proteins respectively removed 1.5-3 times more cadmium than those expressing only cytosolic SmtA. The deinococcal Hpi protein layer per se also contributed to U binding, by conferring substantial negative charge to deinococcal cell surface. The ORF of an acid phosphatase, PhoN was fused with the hpi or SLH domain DNA sequence and purified. Isolated Hpi-PhoN and SLH-PhoN, immobilized on deinococcal peptidoglycan showed efficient uranium precipitation (446 and 160 mg U/g biomass used respectively). The study demonstrates effective exploitation of the deinococcal S layer protein components for (a) cell surface-based sequestration of cadmium, and (b) cell-free preparations for uranium remediation.

Nitrogen supply influences arsenic accumulation and stress responses of rice (Oryza sativa L.) seedlings.

In the present study, the effects of nitrogen supply (low nitrogen: LN and high nitrogen: HN) on As stress (25 µM) responses of rice seedlings were monitored for 7 d. The mean length of primary, adventitious and lateral roots and number of adventitious and lateral roots were significantly improved in LN+As, while further reduced in HN+As, as compared to As alone treatment at 7 d. The LN+As treatment resulted in significant decline in As (848 µg g-1 DW) than that in As alone treatment (1434 µg g-1 DW) in roots but no significant effect was seen in shoot. In contrast, HN+As treatment showed significant increase in shoot As (6.86 µg g-1 DW) as compared to As alone treatment (3.43 µg g-1 DW). The level of nitrate was increased in roots but declined in shoots in As alone treatment. Surprisingly, no improvement in nitrate level was seen in HN+As as compared to that in As alone treatment in both root and shoot. The expression analysis of nitrate transporters (NRT2;1, NRT2;3a, NRT2;4) showed significant differences in expression patterns in As, LN+As and HN+As treatments. In conclusion, nitrogen supply had profound influences on responses of rice plants to As.

Investigation of arsenic accumulation and biochemical response of in vitro developed Vetiveria zizanoides plants.

Vetiver grass (Vetiveria zizanoides L. Nash) is found to be a suitable candidate for the phytoremediation of heavy metals. An investigation of arsenic (As) accumulation, translocation and tolerance was conducted in V. zizanoides plantlets upon exposure to different concentrations of arsenic (10, 50, 100 and 200µM) for 7 and 14 d. V. zizanoides plants were found effective in remediation of As, maximum being at 200µM after 14 d of exposure. The results of TBARS and photosynthetic pigments demonstrated that plants did not experience significant toxicity at all the concentrations of As after 7 days, however an increase in their level was found after 14 d. The up-regulation of antioxidant enzyme activities of superoxide dismutase (SOD), ascorbate peroxidase (APX), guaiacol peroxidase (GPX), catalase (CAT) and glutathione s-transferase (GST) in a coordinated and complementary manner enhanced tolerance to plants against arsenic induced oxidative stress. Taken together, the results indicated that in vitro developed plants of V. zizanoides have the potential to remediate and tolerate varying levels of As.

Cloud point extraction and electrothermal atomic absorption spectrometry of Se (IV)--3,3'-diaminobenzidine for the estimation of trace amounts of Se (IV) and Se (VI) in environmental water samples and total selenium in animal blood and fish tissue samples.

This paper presents a method based on the cloud point extraction for the separation and preconcentration of Se (IV) and Se (VI) in environmental water samples as well as total selenium in animal blood and tissue samples. 3,3'-Diaminobenzidine (DAB) is a selective and sensitive reagent and is known to form an intense yellow compound piazselenol with selenium (IV). When a system consisting of sample, DAB and surfactant Triton X-114 is warmed above the cloud point of the surfactant, it was seen that the DAB-Se (IV) complex gets extracted into the surfactant rich phase while the Se (VI) remains in the aqueous phase. Se (VI) in the sample was reduced to Se (IV) by microwave heating of solution in 4 mol L(-1) HCl and total Se was estimated by carrying out the CPE. The quantification of selenium was carried out using ETAAS. The analytical parameters for the quantitative cloud point extraction of the Se-DAB complex were investigated and optimized. The proposed procedure was validated by applying it to the determination of the content of Se in Certified Reference Material BND 701-02. (NPL, India). The detection limit of selenium in environmental water samples was 0.0025 microg L(-1) with an enrichment factor of 100. The relative standard deviation (RSD) for ten replicate measurements of 5 microg L(-1) was 3.6%. The proposed method was successfully applied to the determination of selenium (IV), (VI) in environmental water samples and determination of total selenium in human blood, SRM-IAEA-A-13 animal blood and SRM-IAEA-407 fish tissue.

Characterization of As (V), As (III) by selective reduction/adsorption on palladium nanoparticles in environmental water samples.

Hydrazine (HZ) and sodium borohydride (BH) are commonly used reagents for the production of palladium nanoparticles (PdNP) in aqueous solution and also for the reduction of arsenic from higher oxidation state to lower oxidation state. A methodology based on the quantitative adsorption of reduced arsenic species on PdNP generated in situ by BH and HZ is described to characterize As (V) and As (III) in environmental water samples. It was observed that PdNP obtained by BH gave quantitative recovery of As (V) and (III) and the PdNP obtained by HZ could account for As (III). The reduced palladium particles are collected and dissolved in minimum amount of nitric acid. The quantification of arsenic was carried out using GFAAS. Optimization of the experimental conditions and instrumental parameters were investigated in detail. The proposed procedure was validated by applying it for the determination of the content of total As in Certified Reference Material BND 301-02 (NPL, India). The detection limit of arsenic in environmental water samples was 0.029 microg L(-1) with an enrichment factor of 50. The relative standard deviation (R.S.D.) for 10 replicate measurements of 5 microg mL(-1) was 4.2%. The proposed method was successfully applied for the determination of sub ppm to ppm levels of arsenic (V), (III) in environmental water samples.

Direct determination of uranium in seawater by laser fluorimetry.

A method for estimation of uranium in seawater by using steady state laser flourimetry is described. Uranium present in seawater, in concentration of approximately 3 ng ml(-1) was estimated without prior separation of matrix. Quenching effect of major ions (Cl(-), Na(+), SO(4)(-), Mg(+), Ca(+), K(+), HCO(3)(-), Br(-)) present in seawater on fluorescence intensity of uranium was studied. The concentration of phosphoric acid required for maximum enhancement of fluorescence intensity was optimized and was found to be 5%. Similarly the volume of concentrated nitric acid required to eliminate the quenching effect of chloride and bromide completely from 5 ml of seawater were optimized and was found to be 3 ml. A simple equation was derived using steady state fluorescence correction method and was used for calculation of uranium concentration in seawater samples. The method has a precesion of 1% (1s, n=3). The values obtained from laser fluorimetry were validated by analyzing the same samples by linear sweep adsorptive stripping voltametry (LSASV) of the uranium-chloranilic acid (2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone) complex. Both the values are well in agreement.

Characterization of arsenic (V) and arsenic (III) in water samples using ammonium molybdate and estimation by graphite furnace atomic absorption spectroscopy.

Arsenic (V) is known to form heteropolyacid with ammonium molybdate in acidic aqueous solutions, which can be quantitatively extracted into certain organic solvents. In the present work, 12-molybdoarsenic acid extracted in butan-1-ol is used for quantification of As (V). Total arsenic is estimated by converting arsenic (III) to arsenic (V) by digesting samples with concentrated nitric acid before extraction. Concentration of As (III) in the sample solutions could be calculated by the difference in total arsenic and arsenic (V). The characterization of arsenic was carried out by GFAAS using Pd as modifier. Optimization of the experimental conditions and instrumental parameters was investigated in detail. Recoveries of (90-110%) were obtained in the spiked samples. The detection limit was 0.2 microg l(-1). The proposed method was successfully applied for the determination of trace amount of arsenic (III) and arsenic (V) in process water samples.