Monitoring Sensors for Urban Air Quality: The Case of the Municipality of Lisbon.

Air pollution is a global issue that impacts environmental inequalities, and air quality sensors can have a decisive role in city policymaking for future cities. Science and society are already aware that during the most challenging times of COVID-19, the levels of air pollution in cities decreased, especially during lockdowns, when road traffic was reduced. Several pollution parameters can be used to analyse cities' environmental challenges, and it is more pressing than ever to have city climate decisions supported by sensor data. We have applied a data science approach to understand the evolution of the levels of carbon monoxide, nitrogen dioxide, particulate matter 2.5, and particulate matter 10 between August 2021 and July 2022. The analysis of the air quality levels, captured for the first time via 80 monitoring stations distributed throughout the municipality of Lisbon, has allowed us to realize that nitrogen dioxide and particulate matter 10 exceed the levels that are recommended by the World Health Organization, thereby increasing the health risk for those who live and work in Lisbon. Supported by these findings, we propose a central role for air quality sensors for policymaking in future cities, taking as a case study the municipality of Lisbon, Portugal, which is among the European cities that recently proposed be climate-neutral and smart city by 2030.

Grape Pomace as a Natural Source of Phenolic Compounds: Solvent Screening and Extraction Optimization.

The optimization of extraction by using solvents of phenolic compounds (TPh) of grape pomace (GP) based on a central composite design was investigated. The GP was characterized, and preliminary assays were conducted with five different solvents (water, ethanol, acetone, methanol, and butanol) and the aqueous mixtures thereof. Ethanol and acetone were revealed to be the best solvents for TPh extraction. The main extraction parameters (temperature-T, time-t, solvent concentration, and liquid-solid ratio-L/S) were optimized by using a central composite design. The optimized conditions for the ethanol extraction (T = 60 °C, t = 1.5 h, L/S = 25 mL/gdryGP) and for acetone (T = 50 °C, t = 1.5 h, L/S = 25 mL/gdryGP) were determined. Single-stage extraction revealed a TPh of 45.18 ± 9.51 mgGAE/gdryGP for acetone and a TPh of 38.70 ± 3.64 mgGAE/gdryGP for ethanol. The characterization of the extracts revealed the presence of gallic acid, caffeic acid, syringic acid, vanillic acid, chlorogenic acid, and p-coumaric acid, where the concentration of the first three compounds stands out in all extracts. A three-stage extraction increased the yield of ethanol to 63.3 mg GAE/gdryGP and the yield of acetone to 59.2 mg GAE/gdryGP. Overall, both solvents allow the extraction of phenolic compounds of grape pomace, but ethanol is commonly considered a greener solvent for this purpose.

3D Printing of Polymeric Bioresorbable Stents: A Strategy to Improve Both Cellular Compatibility and Mechanical Properties.

One of the leading causes of death is cardiovascular disease, and the most common cardiovascular disease is coronary artery disease. Percutaneous coronary intervention and vascular stents have emerged as a solution to treat coronary artery disease. Nowadays, several types of vascular stents share the same purpose: to reduce the percentage of restenosis, thrombosis, and neointimal hyperplasia and supply mechanical support to the blood vessels. Despite the numerous efforts to create an ideal stent, there is no coronary stent that simultaneously presents the appropriate cellular compatibility and mechanical properties to avoid stent collapse and failure. One of the emerging approaches to solve these problems is improving the mechanical performance of polymeric bioresorbable stents produced through additive manufacturing. Although there have been numerous studies in this field, normalized control parameters for 3D-printed polymeric vascular stents fabrication are absent. The present paper aims to present an overview of the current types of stents and the main polymeric materials used to fabricate the bioresorbable vascular stents. Furthermore, a detailed description of the printing parameters' influence on the mechanical performance and degradation profile of polymeric bioresorbable stents is presented.

Chemical Characterization of Sambucus nigra L. Flowers Aqueous Extract and Its Biological Implications.

The main goal of this study was to chemically characterize an aqueous S. nigra flower extract and validate it as a bioactive agent. The elderflower aqueous extraction was performed at different temperatures (50, 70 and 90 °C). The extract obtained at 90 °C exhibited the highest phenolic content and antiradical activity. Therefore, this extract was analyzed by GC-MS and HPLC-MS, which allowed the identification of 46 compounds, being quercetin and chlorogenic acid derivatives representative of 86% of the total of phenolic compounds identified in hydrophilic fraction of the aqueous extract. Naringenin (27.2%) was the major compound present in the lipophilic fraction. The antiproliferative effects of the S. nigra extract were evaluated using the colon cancer cell lines RKO, HCT-116, Caco-2 and the extract's antigenotoxic potential was evaluated by the Comet assay in RKO cells. The RKO cells were the most susceptible to S. nigra flower extract (IC50 = 1250 µg mL-1). Moreover, the extract showed antimicrobial activity against Gram-positive bacteria, particularly Staphylococcus aureus and S. epidermidis. These results show that S. nigra-based extracts can be an important dietary source of bioactive phenolic compounds that contribute to health-span improving life quality, demonstrating their potential as nutraceutical, functional foods and/or cosmetic components for therapeutic purposes.

[Self-perceived health in Spanish and Portuguese young seniors after the great recession according to the European Health Survey: A cross-sectional study]. / Salud autopercibida en ancianos jóvenes españoles y portugueses tras la recesión según la Encuesta Europea de Salud: un estudio transversal.

OBJECTIVE: The aim of this study is to describe self-perceived health (SPH) in Spanish and Portuguese population aged between 65 and 74years old and to analyze other associated factors measured in the European Health Interview Survey (EHIS) in 2014. DESIGN: Retrospective secondary data analysis from EHIS 2014. SETTING: Community based. PARTICIPANTS: Young seniors, people aged 65-74years old surveyed and with available data from two countries. MAIN MEASUREMENTS: For each country and sex, SPH, sociodemographic variables, clinical chronic conditions, lifestyles and utilization of health care resources were described. A multiple logistic regression (very good or good SPH versus remaining levels) with robust estimators was used to assess the country effect adjusted by sociodemographic factors, clinical factors and/or lifestyles. RESULTS: Good SPH showed variation by country (52.9% Spain vs. 19% Portugal; P<.001) and gender (44% men vs. 31.3% women; P<.001). Both countries had high prevalence of multimorbidity (64.7% Spain vs. 76.3% Portugal; P<.001) and the distribution of chronic diseases was similar with the only exception of depression (13.2% Spain vs. 20.3% Portugal; P<.001). Regarding individual factors related with good SPH we found Spanish nationality (OR: 4.52; 95%CI: 4.05-5.04), male gender (OR: 1.10; 95%CI: 1.101-2.21), education level, completing primary school (OR: 1.28; 95%CI: 1.24-1.31) or achieving tertiary level (OR: 2.43; 95%CI: 1.14-5.17) and physical activity of two or more days per week (OR: 1.87; 95%CI: 1.39-2.5). Factors with a negative impact on SPH were multimorbidity (OR: 0.19; 95%CI: 0.12-0.31) and depression (OR: 0.32; 95%CI: 0.25-0.41). DISCUSSION: Good SPH is higher in Spanish young seniors compared to Portuguese. Having higher level of education achieved and practicing regular physical exercise were two most important factors increasing good SPH.

Binding enhancements of antibody functionalized natural and synthetic fibers.

Development of low cost biosensing using convenient and environmentally benign materials is important for wide adoption and ultimately improved healthcare and sustainable development. Immobilized antibodies are often incorporated as an essential biorecognition element in point-of-care biosensors but these proteins are costly. We present a strategy of combining convenient and low-cost surface functionalization approaches for increasing the overall binding activity of antibody functionalized natural and synthetic fibers. We demonstrate a simple one-step in situ silica NP growth protocol for increasing the surface area available for functionalization on cotton and polyester fabrics as well as on nanoporous cellulose substrates. Comparing this effect with the widely adopted and low cost plant-based polyphenol coating to enhance antibody immobilization, we find that both approaches can similarly increase overall surface activity, and we illustrate conditions under which the two approaches can produce an additive effect. Furthermore, we introduce co-immobilization of antibodies with a sacrificial "steric helper" protein for further enhancing surface activities. In combination, several hundred percent higher activities compared to physical adsorption can be achieved while maintaining a low amount of antibodies used, thus paving a practical path towards low cost biosensing.

Present Status in Polymeric Mouthguards. A Future Area for Additive Manufacturing?

Athletes from contact sports are more prone to orofacial injuries because of the exposure to possible shocks and collisions derived from physical proximity. The use of protector polymeric mouthguards proved to be useful in the prevention of the described injuries. There are different types of mouthguards with varying ranges of protection and prices, but they are all made from polymers and share the same propose: to absorb and dissipate the impact energy resulting from the shocks. As they are used inside the mouth, they should not impair breathing and speaking nor compromise the comfort of the athlete. However, the ideal mouthguard is yet to be created. The choice of the most appropriate polymeric material and the standard required properties have not yet been reported. Regardless of the numerous studies in this field, normalized control parameters for both material characterization and mouthguard fabrication are absent. This paper aims to present a review of the current types of available mouthguards and their properties/characteristics. Moreover, a detailed description of the most common polymers for the fabrication of mouthguards, together with the manufacturing techniques, are discussed.

Maternal nutrient intake and fetal gastroschisis: A case-control study.

Fetal gastroschisis is a paraumbilical abdominal wall defect with herniation of the abdominal organs. This multifactorial malformation occurs in young pregnant women, and the underlying cause of the disease remains unknown; however, nutritional factors may play a role in its development. This case-control study explored the association of maternal nutrient intake with the occurrence of gastroschisis. The gastroschisis group (GG) comprised 57 pregnant women with fetuses with gastroschisis, and the control group (CG) comprised 114 pregnant women with normal fetuses matched for maternal age, gestational age, and preconception body mass index classification. Nutritional assessments related to the preconception period were obtained using the food consumption frequency questionnaire, and nutrient intakes were calculated using nutrition programs. The median daily calorie intake was higher (2,382.43 vs. 2,198.81; p = .041) in the GG than in the CG. The median intake of methionine (763.89 vs. 906.34; p = .036) and threonine (1,248.34 vs. 1,437.01; p = .018) was lower in the GG than in the CG. Pregnant women with fetuses with gastroschisis have a diet characterized by higher calorie intake and lower levels of essential amino acids (methionine and threonine) during the preconception period than pregnant women with normal fetuses.

Incorporation of Tannic Acid in Food-Grade Guar Gum Fibrous Mats by Electrospinning Technique.

The use of polysaccharides to produce functional micro- or nanoscale fibrous mats has attracted growing interest for their food-grade applications. In this study, the characterization and electro-spinnability of guar gum (GG) solutions loaded with tannic acid (TA) was demonstrated. Food-grade antioxidant materials were successfully produced by electrospinning while incorporating different loads of TA into GG fibers. Bead-free GG-TA fibers could be fabricated from GG solution (2 wt %) with 10 wt % TA. Increasing the amount of TA led to fibers with defects and larger diameter sizes. Fourier Transformed Infrared Spectroscopy and X-ray Diffraction of neat GG and TA loaded GG fibrous mats suggested that inclusion of TA interrupted the hydrogen bonding and that a higher density of the ordered junction zones formed with the increased TA. The high TA incorporation efficiency and retained antioxidant activity of the fibrous mats afford a potential application in active edible film or drug delivery system.

Highly Active Protein Surfaces Enabled by Plant-Based Polyphenol Coatings.

Proteins represent complex biomolecules capable of wide-ranging but also highly specific functionalities. Their immobilization on material supports can enable broad applications from sensing and industrial biocatalysis to biomedical interfaces and materials. We demonstrate the advantages of using aqueous-processed cross-linked polyphenol coatings for immobilizing proteins, including IgG, avidin, and various single and multidomain enzymes on diverse materials, to enable active biofunctional structures (e.g., ca. 2.2, 1.7, 1.1, and 4.8 mg·m-2 active phosphatase on nanoporous cellulose and alumina, steel mesh, and polyester fabric, respectively). Enzyme assays, X-ray photoelectron spectroscopy, silver staining, supplemented with contact angle, solid-state 13C NMR, HPLC, and ESI-MS measurements were used to characterize the polyphenols, coatings, and protein layers. We show that the functionalization process may be advantageously optimized directly for protein activity rather than the traditional focus on the thickness of the coating layer. Higher activities (by more than an order of magnitude in some cases) and wider process pH and material compatibility are demonstrated with polyphenol coatings than other approaches such as polydopamine. Coatings formed from different plant polyphenol extracts, even at lowered purity (and cost), were also found to be highly functional. Chemically, our results indicate that polyphenol coatings differ from polydopamine mainly because of the elimination of amine groups, and that polyphenol layers with intermediate levels of reactivity may better lead to high immobilized protein activity. Overall, an improved understanding of simple-to-use polyphenol coatings has been obtained, which enabled a significant development in active protein surfaces that may be applied across diverse materials and nanostructured supports.

Aerosolizable gold nano-in-micro dry powder formulations for theragnosis and lung delivery.

Functionalized gold nanoparticles (AuNPs) have been widely investigated as promising multifunctional nanosystems for the theragnosis of lung cancer, the most common and prominent cause of cancer death worldwide. Nevertheless, nanoparticles are not in appropriate sizes for an accurate deep lung delivery and the lack of locally and effective delivery of therapeutic biomolecules to the deep lungs is, in fact, the major cause of low therapeutic outcome. Herein we incorporate, for the first time, AuNPs into respirable microparticles. AuNPs were functionalized with biocompatible oligo(2-oxazoline)-based optically stable fluorescent coatings, and conjugated with a laminin peptide (YIGSR) for targeted lung cancer delivery. These POxylated AuNPs were then incorporated into a chitosan matrix by a clean process, supercritical CO2-assisted spray drying (SASD), yielding nano-in-micro clean ultrafine dry powder formulations. The engineered formulations present the adequate morphology and flowability to reach the deep lung, with aerodynamic sizes ranging 3.2-3.8µm, and excellent fine particle fraction (FPF) (FPF of 47% for CHT-bearing targeted AuNPs). The optimal biodegradation and release profiles enabled a sustained and controlled release of the embedded nanoparticles, with enhanced cellular uptake, opening new prospects for future lung theragnosis.

Electrospun ultra-fine cellulose acetate fibrous mats containing tannic acid-Fe3+ complexes.

Cellulose acetate (CA) fibrous mats with improved mechanical and antioxidant properties were produced by a simple, scalable and cost-effective electrospinning method. Fibers loaded with small amounts of TA-Fe3+ complexes showed an increase in tensile strength of ∼117% when compared to that of neat CA and were more resistant than those loaded with TA alone. The water uptake of the fibers increased upon TA or TA-Fe3+ incorporation while their thermal behavior was only slightly affected. Fibrous mats loaded with TA-Fe3+ showed comparable antioxidant activity with that of CA/TA mats, and a much slower TA release. These results suggest that TA-Fe3+ complexes can be incorporated into electrospun CA fibers to improve their mechanical properties and antioxidant activity which may be of interest for the development of active packaging that can extend the shelf life of perishable foods.

Electrospun Polymer Nanofibers Reinforced by Tannic Acid/Fe+++ Complexes.

We report the successful preparation of reinforced electrospun nanofibers and fibrous mats of polyvinyl alcohol (PVA) via a simple and inexpensive method using stable tannic acid (TA) and ferric ion (Fe+++) assemblies formed by solution mixing and pH adjustment. Changes in solution pH change the number of TA galloyl groups attached to the Fe+++ from one (pH < 2) to two (3 < pH < 6) to three (pH < 7.4) and affect the interactions between PVA and TA. At pH ~ 5.5, the morphology and fiber diameter size (FDS) examined by SEM are determinant for the mechanical properties of the fibrous mats and depend on the PVA content. At an optimal 8 wt % concentration, PVA becomes fully entangled and forms uniform nanofibers with smaller FDS (p < 0.05) and improved mechanical properties when compared to mats of PVA alone and of PVA with TA (p < 0.05). Changes in solution pH lead to beads formation, more irregular FDS and poorer mechanical properties (p < 0.05). The Fe+++ inclusion does not alter the oxidation activity of TA (p > 0.05) suggesting the potential of TA-Fe+++ assemblies to reinforce polymer nanofibers with high functionality for use in diverse applications including food, biomedical and pharmaceutical.

Strategies to improve the mechanical strength and water resistance of agar films for food packaging applications.

Agar films possess several properties adequate for food packaging applications. However, their high cost-production and quality variations caused by physiological and environmental factors affecting wild seaweeds make them less attractive for industries. In this work, native (NA) and alkali-modified (AA) agars obtained from sustainably grown seaweeds (integrated multi-trophic aquaculture) were mixed with locust bean gum (LBG) to make 'knife-coated' films with fixed final concentration (1 wt%) and variable agar/LBG ratios. Agar films were easier to process upon LBG addition (viscosity increase and gelling character decrease of the film-forming solutions observed by dynamic oscillatory and steady shear measurements). The mechanical properties and water resistance were optimal for films with 50 and/or 75% LBG contents and best in the case of NA (cheaper to extract). These findings can help reduce the cost-production of agar packaging films. Moreover, the controlled cultivation of seaweeds can provide continuous and reliable feedstock for transformation industries.

Improving agar electrospinnability with choline-based deep eutectic solvents.

Very recently our group has produced novel agar-based fibers by an electrospinning technique using water as solvent and polyvinyl alcohol (PVA) as co-blending polymer. Here, we tested the deep eutectic solvent (DES), (2-hydroxyethyl)trimethylammonium chloride/urea prepared at 1:2 molar ratio, as an alternative solvent medium for agar electrospinning. The electrospun materials were collected with an ethanol bath adapted to a previous electrospinning set-up. One weight percent agar-in-DES showed improved viscoelasticity and hence, spinnability, when compared to 1 wt% agar-in-water and pure agar nanofibers were successfully electrospun if working above the temperature of sol-gel transition (∼80 °C). By changing the solvent medium we decreased the PVA concentration (5 wt% starting solution) and successfully produced composite fibers with high agar contents (50/50 agar/PVA). Best composite fibers were formed with the 50/50 and 30/70 agar/PVA solutions. These fibers were mechanically resistant, showed tailorable surface roughness and diverse size distributions, with most of the diameters falling in the sub-micron range. Both nano and micro forms of agar fibers (used separately or combined) may have potential for the design of new and highly functional agar-based materials.

Alternative plasticizers for the production of thermo-compressed agar films.

Agar films were produced by thermo-compression using choline chloride (ChCl) as a plasticizer with urea. The three solid components were mixed together with the salt and urea (minor components) added to agar (main component) according to a fixed mass ratio of, respectively, 1.16:1:5. A central composite rotatable design (CCRD) with three parameters, 2(3), was used to evaluate the effects of temperature (X1; °C), time (X2; min) and applied load (X3; kN) of heat-pressing on the maximum tensile strength (TS) of the films (Y; MPa). Mixtures of urea and agar prepared at a mass ratio of 1:5 did not form homogeneous films suggesting the important plasticizing role of the salt. Heat-pressing the mixtures at more draconian conditions led to much darker and opaque films, with better mechanical resistance (higher values of TS). The most resistant film (∼ 15 MPa) was obtained at 140°C, 20 min and 176 kN. Selected films, including the optimal, showed similar water sorption profiles and close values of water vapor permeability (∼ 2.5-3.7 × 10(-9)gm(-1)s(-1)Pa(-1)). The fracture behavior and mechanical properties of the films were greatly affected by additional water plasticization when the films were stored at different conditions of relative humidity.

Electrospinning of agar/PVA aqueous solutions and its relation with rheological properties.

In this work, we report the successful fabrication of agar-based nanofibers by electrospinning technique, using water as solvent media. A tubeless spinneret was attached inside the electrospinning chamber, operating at 50°C, to avoid agar gelation. Agar pure solution (1 wt%) showed inadequate spinnability regardless of the used electrospinning conditions. The addition of a co-blending polymer such as PVA (10 wt% starting solution) improved the solutions viscoelasticity and hence, the solutions spinnability. Agar/PVA solutions were prepared with different mass ratios (100/0, 50/50, 40/60, 30/70, 20/80 and 0/100) and electrospun at various sets of electrospinning conditions. Best nanofibers were obtained with 30/70 and 20/80 agar/PVA blends while samples with higher agar contents (50/50 and 40/60 agar/PVA) were harder to process and led to discontinuous fibrous mats. This first set of encouraging results can open a new window of opportunities for agar-based biomaterials in the form of nanofibers.

Choline chloride based ionic liquid analogues as tool for the fabrication of agar films with improved mechanical properties.

In the present paper, we test the suitability of ChCl/urea (DES-U) and ChCl/glycerol (DES-G) eutectic mixtures, each one prepared at 1:2 molar ratio, for the production of agar films. A three-step process is proposed: pre-solubilization of polymer in DES followed by compression-molding and subsequent drying. The mechanical properties, water resistance and microstructure of the films were evaluated at different polymer concentrations (i.e. 2-6%, w/w). DES-U showed by far, the best film forming ability. Agreeing with the diffusion and SEM data, films with the best mechanical properties were found at the lowest and highest agar concentrations (tensile strengths of 24.2-42 MPa and elongations of 15.4-38.9%). The water sorption and contact angle studies suggested increased hydrophilicity for the film containing the lowest concentration of agar. The use of choline chloride based ionic liquid analogues as solvent and plasticizer might be a promising tool for the development of new non-aqueous materials based on seaweed polysaccharides.

Minimum information about a biofilm experiment (MIABiE): standards for reporting experiments and data on sessile microbial communities living at interfaces.

The minimum information about a biofilm experiment (MIABiE) initiative has arisen from the need to find an adequate and scientifically sound way to control the quality of the documentation accompanying the public deposition of biofilm-related data, particularly those obtained using high-throughput devices and techniques. Thereby, the MIABiE consortium has initiated the identification and organization of a set of modules containing the minimum information that needs to be reported to guarantee the interpretability and independent verification of experimental results and their integration with knowledge coming from other fields. MIABiE does not intend to propose specific standards on how biofilms experiments should be performed, because it is acknowledged that specific research questions require specific conditions which may deviate from any standardization. Instead, MIABiE presents guidelines about the data to be recorded and published in order for the procedure and results to be easily and unequivocally interpreted and reproduced. Overall, MIABiE opens up the discussion about a number of particular areas of interest and attempts to achieve a broad consensus about which biofilm data and metadata should be reported in scientific journals in a systematic, rigorous and understandable manner.

Influence of the extraction process on the rheological and structural properties of agars.

Agars obtained by traditional hot-water (TWE) and microwave-assisted (MAE) extractions were compared in terms of their rheological and physicochemical properties and molecular self-association in solutions of low (0.05%, w/w) and high (1.5%, w/w) polymer concentrations. At low concentration, thin gelled layers were imaged by AFM. Slow or rapid cooling of the solutions influenced structure formation. In each case, TWE and MAE agar structures were different and apparently larger for MAE. At high concentration, progressive structural reinforcement was seen; while TWE agar showed a more open and irregular 3D network, MAE agar gel imaged by cryoSEM was denser and fairly uniform. The rheological (higher thermal stability and consistency) and mechanical (higher gel strength) behaviors of MAE agar seemed consistent with a positive effect of molecular mass and 3,6-anhydro-α-l-galactose content. MAE produced non-degraded agar comparable with commercial ones and if properly monitored, could be a promising alternative to TWE.