RESUMEN
OBJECTIVE: To assess the outcomes of several rodent animal models for studying tooth extraction-related medication-related osteonecrosis of the jaw (MRONJ). DESIGN: After a search of the databases, 2004 articles were located, and 118 corroborated the inclusion factors (in vivo studies in rodents evaluating tooth extraction as a risk factor for the development of MRONJ). RESULTS: Numerous studies attempting to establish an optimal protocol to induce MRONJ were found. Zoledronic acid (ZA) was the most used drug, followed by alendronate (ALN). Even when ZA did not lead to the development of MRONJ, its effect compromised the homeostasis of the bone and soft tissue. The association of other risk factors (dexamethasone, diabetes, and tooth-related inflammatory dental disease) besides tooth extraction also played a role in the development of MRONJ. In addition, studies demonstrated a relationship between cumulative dose and MRONJ. CONCLUSIONS: Both ZA and ALN can lead to MRONJ in rodents when equivalent human doses (in osteoporosis or cancer treatment) are used. Local oral risk factors and tooth-related inflammatory dental disease increase the incidence of MRONJ in a tooth extraction-related rodent model.
Asunto(s)
Osteonecrosis de los Maxilares Asociada a Difosfonatos , Conservadores de la Densidad Ósea , Animales , Humanos , Difosfonatos/efectos adversos , Conservadores de la Densidad Ósea/efectos adversos , Osteonecrosis de los Maxilares Asociada a Difosfonatos/etiología , Roedores , Ácido Zoledrónico/efectos adversos , Extracción Dental/efectos adversos , Modelos Animales , Alendronato/efectos adversosRESUMEN
BACKGROUND: Piezosurgery is an option to realize several clinical and surgical procedures, due to its advantages as precision in osteotomy. This study aims to evaluate the heating and osteotomy speed in bone blocks of ox's shins, to report the best way of its use in the clinical practice. METHODS: A bone blocks had the dimensions as follow: 20 mm length, 10 mm width, and 5 mm wide. It was evaluated 5 different groups: group LM (low speed and medium pressure); group HM (high speed and medium pressure); group HH (high speed and high pressure); group LH (low speed and high pressure); group LL (low speed and low pressure). The heating increasement was measured with a thermal viewer and the osteotomy was timed when the cut depth reached 5 mm and the whole block detached itself. One-way ANOVA and Tukey tests were adopted to analyze the data and the level of significance was set at a P value of 0.05. RESULTS: The pressure and speed of the tip, works directly in the generated temperature during osteotomy. The medium pressure level is the most favorable, because high pressure level caused a high increase in heating over the bone and low pressure presented a very long osteotomy time. CONCLUSIONS: The high speed and medium pressure can be suggested as the most efficient in both standards of time/temperature to realize the osteotomy.
Asunto(s)
Osteotomía , Piezocirugía , Análisis de Varianza , Huesos , TemperaturaRESUMEN
Biologic behavior of the bone tissue around implants with four different surfaces was evaluated. The surfaces were: modified by laser (LS); modified by laser with sodium silicate deposition (SS); and commercially available surfaces modified by acid etching (AS) and machined surface (MS). Topographic characterization of the surfaces was performed by scanning electron microscopy (SEM)- energy dispersive X-ray spectrometry (EDX) before experimental surgery. Thirty rabbits received 60 implants in their right and left tibias, 1 implant of each surface being placed in each tibia. The analyzed periods were 4, 8, and 12 weeks postoperatively. Histometric analysis was performed evaluating bone interface contact (BIC) and bone area (BA). The results obtained were submitted to the analysis of variance and the Tukey t-test. The elemental mapping was evaluated by means of SEM at 4 weeks postoperatively. The topographic characterization showed differences between the analyzed surfaces. Generally, the BIC and BA of LS and SS implants were statistically higher than those of AS and MS in most of the analyzed periods. Elemental mapping showed high peaks of calcium and phosphorous in all groups. Based on the present methodology, it may be concluded that experimental modifications LS and SS accelerated the stages of the bone tissue repair process around the implants, providing the highest degree of osseointegration.
Asunto(s)
Sustitutos de Huesos , Materiales Biocompatibles Revestidos , Oseointegración , Prótesis e Implantes , Tibia , Titanio , Animales , Sustitutos de Huesos/química , Sustitutos de Huesos/farmacología , Calcio/metabolismo , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/farmacología , Rayos Láser , Masculino , Fósforo/metabolismo , Conejos , Radiografía , Dióxido de Silicio , Propiedades de Superficie , Tibia/diagnóstico por imagen , Tibia/lesiones , Tibia/metabolismo , Titanio/química , Titanio/farmacologíaRESUMEN
The purpose of this study was to evaluate commercially pure titanium implant surfaces modified by laser beam (LS) and LS associated with sodium silicate (SS) deposition, and compare them with machined surface (MS) and dual acid-etching surfaces (AS) modified. Topographic characterization was performed by scanning electron microscopy-X-ray energy dispersive spectroscopy (SEM-EDX), and by mean roughness measurement before surgery. Thirty rabbits received 60 implants in their right and left tibias. One implant of each surface in each tibia. The implants were removed by reverse torque for vivo biomechanical analysis at 30, 60, and 90 days postoperative. In addition, the surface of the implants removed at 30 days postoperative was analyzed by SEM-EDX. The topographic characterization showed differences between the analyzed surfaces, and the mean roughness values of LS and SS were statistically higher than AS and MS. At 30 days, values removal torque LS and SS groups showed a statistically significant difference (p < 0.05) when compared with MS and AS. At 60 days, groups LS and SS showed statistically significant difference (p < 0.05) when compared with MS. At 90 days, only group SS presented statistically higher (p < 0.05) in comparison with MS. The authors can conclude that physical chemistry properties and topographical of LS and SS implants increases bone-implant interaction and provides higher degree of osseointegration when compared with MS and AS.
Asunto(s)
Prótesis e Implantes , Silicatos , Titanio , Animales , Fenómenos Biomecánicos , Rayos Láser , Masculino , Microscopía Electrónica de Rastreo , ConejosRESUMEN
OBJECTIVES: The purpose of this study was to evaluate the surfaces of commercially pure titanium (cp Ti) implants modified by laser beam (LS), without and with hydroxyapatite deposition by the biomimetic method (HAB), without (HAB) and with thermal treatment (HABT), and compare them with implants with surfaces modified by acid treatment (AS) and with machined surfaces (MS), employing topographical and biomechanics analysis. METHODS: Forty-five rabbits received 75 implants. After 30, 60, and 90 days, the implants were removed by reverse torque and the surfaces were topographically analyzed. RESULTS: At 30 days, statistically significant difference (P < 0.05) was observed among all the surfaces and the MS, between HAB/HABT and AS and between HAB and LS. At 60 days, the reverse torque of LS, HAB, HABT, and AS differed significantly from MS. At 90 days, difference was observed between HAB and MS. The microtopographic analysis revealed statistical difference between the roughness of LS, HAB, and HABT when compared with AS and MS. CONCLUSIONS: It was concluded that the implants LS, HAB, and HABT presented physicochemical and topographical properties superior to those of AS and MS and favored the osseointegration process in the shorter periods. In addition, HAB showed the best results when compared with other surfaces.
Asunto(s)
Materiales Biocompatibles Revestidos/química , Materiales Dentales/química , Durapatita/química , Rayos Láser , Titanio/química , Grabado Ácido Dental/métodos , Animales , Fenómenos Biomecánicos , Materiales Biomiméticos/química , Cristalografía , Materiales Dentales/efectos de la radiación , Diseño de Prótesis Dental , Remoción de Dispositivos , Calor , Masculino , Microscopía Electrónica de Rastreo , Oseointegración/fisiología , Plasma/química , Conejos , Espectrometría por Rayos X , Propiedades de Superficie , Tibia/patología , Tibia/cirugía , Factores de Tiempo , Titanio/efectos de la radiación , Torque , HumectabilidadRESUMEN
O objetivo deste caso clínico é um tratamento com reposição dos dentes 11 e 21, com fixações convencionais sob carga imediata, e restaurações protéticas definitivas com pilares personalizados com coroas do sistema Procera All Ceram, desta maneira promovendo estética, integração social e conforto.