Low noise all-fiber amplification of a coherent supercontinuum at 2 µm and its limits imposed by polarization noise.

We report a low noise, broadband, ultrafast Thulium/Holmium co-doped all-fiber chirped pulse amplifier, seeded by an Erbium-fiber system spectrally broadened via coherent supercontinuum generation in an all-normal dispersion photonic crystal fiber. The amplifier supports a - 20 dB bandwidth of more than 300 nm and delivers high quality 66 fs pulses with more than 70 kW peak power directly from the output fiber. The total relative intensity noise (RIN) integrated from 10 Hz to 20 MHz is 0.07%, which to our knowledge is the lowest reported RIN for wideband ultrafast amplifiers operating at 2 µm to date. This is achieved by eliminating noise-sensitive anomalous dispersion nonlinear dynamics from the spectral broadening stage. In addition, we identify the origin of the remaining excess RIN as polarization modulational instability (PMI), and propose a route towards complete elimination of this excess noise. Hence, our work paves the way for a next generation of ultra-low noise frequency combs and ultrashort pulse sources in the 2 µm spectral region that rival or even outperform the excellent noise characteristics of Erbium-fiber technology.

Temporal fine structure of all-normal dispersion fiber supercontinuum pulses caused by non-ideal pump pulse shapes.

We experimentally investigate the spectro-temporal characteristics of coherent supercontinuum (SC) pulses generated in several implementations of silica and soft-glass all-normal dispersion (ANDi) photonic crystal fibers optimized for pumping with Erbium (Er):fiber femtosecond laser technology. We characterize the resulting SC using time-domain ptychography, which is especially suitable for the measurement of complex, spectrally broadband ultrashort pulses. The measurements of the ANDi SC pulses reveal intricate pulse shapes, considerable temporal fine structure, and oscillations on time scales of < 25 femtoseconds, which differ from the smoothness and simplicity of temporal profiles obtained in numerical simulations and observed in previous experiments. We link the measured complex features to temporal sub-structures of the pump pulse, such as pre- and post-pulses and low-level pedestals, which are common in high pulse energy ultrafast Er:fiber systems. We also observe spectro-temporal structures consistent with incoherent noise amplification in weakly birefringent fiber samples. Our results highlight the importance of the pump source and polarization-maintaining (PM) fibers for high-quality SC generation and have practical relevance for many ultrafast photonics applications employing ANDi fiber-based SC sources.

Ultra low-noise coherent supercontinuum amplification and compression below 100 fs in an all-fiber polarization-maintaining thulium fiber amplifier.

We report an ultra-low noise, polarization-maintaining, ultrafast Thulium-doped all-fiber chirped pulse amplifier, seeded by a polarized all-normal dispersion (ANDi) supercontinuum (SC) driven by an ultrafast Erbium-fiber laser. The system comprises only polarization-maintaining fibers and delivers 96 fs pulses with 350 mW output power at 100 MHz, centered at 1900 nm. The integrated relative intensity noise (RIN) in the range of 10 Hz - 10 MHz is only 0.047% at the amplifier output, which is virtually identical to the RIN of the Erbium-fiber laser driving the SC. Therefore, neither the SC generation nor the amplification process introduce significant excess noise. The RIN of our system is an order of magnitude lower than similar systems previously seeded with Raman solitons. This highlights the superior noise properties of ANDi SC and their potential as ultra-low noise seed sources for broadband, high power ultrafast fiber amplifiers and frequency combs.

Improved retrieval of complex supercontinuum pulses from XFROG traces using a ptychographic algorithm.

We demonstrate that time-domain ptychography, a recently introduced iterative ultrafast pulse retrieval algorithm, has properties well suited for the reconstruction of complex light pulses with large time-bandwidth products from a cross-correlation frequency-resolved optical gating (XFROG) measurement. It achieves temporal resolution on the scale of a single optical cycle using long probe pulses and low sampling rates. In comparison to existing algorithms, ptychography minimizes the data to be recorded and processed, and significantly reduces the computational time of the reconstruction. Experimentally, we measure the temporal waveform of an octave-spanning, 3.5 ps long, supercontinuum pulse generated in photonic crystal fiber, resolving features as short as 5.7 fs with sub-fs resolution and 30 dB dynamic range using 100 fs probe pulses and similarly large delay steps.

All-optical implementation of a time-domain ptychographic pulse reconstruction setup.

An all-optical implementation of pulse reconstruction using time-domain ptychography has been demonstrated showing excellent results. The implementation was easy to set up and eliminated a number of drawbacks found in other second-order techniques, such as the beam splitter modifying the pulse under consideration, the time ambiguity, or the strict correspondence between time delay increment and temporal resolution. Ptychography generally offers superior performance compared to algorithms based on general projections, requires considerably less computational effort, and is much less susceptible to noise.

All-optical implementation of a time-domain ptychographic pulse reconstruction setup: publisher's note.

This note reports author corrections that were omitted from Appl. Opt.55, 5008 (2016) 10.1364/AO.55.005008 in error during production. The article was corrected online 23 June 2016.

White light wavefront control with a spatial light modulator.

Spatial light modulators are ubiquitous tools for wavefront control and laser beam shaping but have traditionally been used with monochromatic sources due to the inherent wavelength dependence of the calibration process and subsequent phase manipulation. In this work we show that such devices can also be used to shape broadband sources without any wavelength dependence on the output beam's phase. We outline the principle mathematically and then demonstrate it experimentally using a supercontinuum source to shape rotating white-light Bessel beams carrying orbital angular momentum.