Immunomodulatory properties of a viral homolog of human interleukin-10 expressed by human cytomegalovirus during the latent phase of infection.

Human cytomegalovirus (HCMV) establishes a latent infection in hematopoietic cells, from which it can reactivate to cause significant disease in immunocompromised individuals. HCMV expresses a functional homolog of the immunosuppressive cytokine interleukin-10 (termed cmvIL-10), and alternate splicing of the cmvIL-10 transcript results in expression of a latency-associated cmvIL-10 transcript (LAcmvIL-10). To determine whether LAcmvIL-10 encodes immunosuppressive functions, recombinant LAcmvIL-10 protein was generated, and its impact on major histocompatibility complex class II (MHC-II) expression was examined on granulocyte macrophage progenitor cells (GM-Ps) and monocytes. LAcmvIL-10 (and cmvIL-10) downregulated MHC-II on the surfaces of both cell types. This downregulation was associated with a decrease in total MHC-II protein and transcription of components of the MHC-II biosynthesis pathway. Unlike cmvIL-10, LAcmvIL-10 did not trigger phosphorylation of Stat3, and its ability to downregulate MHC-II was not blocked by neutralizing antibodies to the human IL-10 receptor, suggesting that LAcmvIL-10 either does not engage the cellular IL-10 receptor or utilizes it in a different manner from cmvIL-10. The impact of LAcmvIL-10 on dendritic cell (DC) maturation was also assessed. In contrast to cmvIL-10, LAcmvIL-10 did not inhibit the expression of costimulatory molecules CD40, CD80, and CD86 and the maturation marker CD83 on DCs, nor did it inhibit proinflammatory cytokines (IL-1alpha, IL-1beta, IL-6 and tumor necrosis factor alpha). Thus, LAcmvIL-10 retains some, but not all, of the immunosuppressive functions of cmvIL-10. As GM-Ps and monocytes support latent infection, expression of LAcmvIL-10 may enable HCMV to avoid immune recognition and clearance during latency.

Incomplete CD8(+) T lymphocyte differentiation as a mechanism for subdominant cytotoxic T lymphocyte responses to a viral antigen.

CD8(+) cytotoxic T lymphocytes (CTLs) recognize antigen in the context of major histocompatibility complex (MHC) class I molecules. Class I epitopes have been classified as dominant or subdominant depending on the magnitude of the CTL response to the epitope. In this report, we have examined the in vitro memory CTL response of H-2(d) haplotype murine CD8(+) T lymphocytes specific for a dominant and subdominant epitope of influenza hemagglutinin using activation marker expression and staining with soluble tetrameric MHC-peptide complexes. Immune CD8(+) T lymphocytes specific for the dominant HA204-210 epitope give rise to CTL effectors that display activation markers, stain with the HA204 tetramer, and exhibit effector functions (i.e., cytolytic activity and cytokine synthesis). In contrast, stimulation of memory CD8(+) T lymphocytes directed to the subdominant HA210-219 epitope results in the generation of a large population of activated CD8(+) T cells that exhibit weak cytolytic activity and fail to stain with the HA210 tetramer. After additional rounds of restimulation with antigen, the HA210-219-specific subdominant CD8(+) T lymphocytes give rise to daughter cells that acquire antigen-specific CTL effector activity and transition from a HA210 tetramer-negative to a tetramer-positive phenotype. These results suggest a novel mechanism to account for weak CD8(+) CTL responses to subdominant epitopes at the level of CD8(+) T lymphocyte differentiation into effector CTL. The implications of these findings for CD8(+) T lymphocyte activation are discussed.

Assembly of the herpes simplex virus capsid: preformed triplexes bind to the nascent capsid.

The herpes simplex virus type 1 (HSV-1) capsid is a T=16 icosahedral shell that forms in the nuclei of infected cells. Capsid assembly also occurs in vitro in reaction mixtures created from insect cell extracts containing recombinant baculovirus-expressed HSV-1 capsid proteins. During capsid formation, the major capsid protein, VP5, and the scaffolding protein, pre-VP22a, condense to form structures that are extended into procapsids by addition of the triplex proteins, VP19C and VP23. We investigated whether triplex proteins bind to the major capsid-scaffold protein complexes as separate polypeptides or as preformed triplexes. Assembly products from reactions lacking one triplex protein were immunoprecipitated and examined for the presence of the other. The results showed that neither triplex protein bound unless both were present, suggesting that interaction between VP19C and VP23 is required before either protein can participate in the assembly process. Sucrose density gradient analysis was employed to determine the sedimentation coefficients of VP19C, VP23, and VP19C-VP23 complexes. The results showed that the two proteins formed a complex with a sedimentation coefficient of 7.2S, a value that is consistent with formation of a VP19C-VP23(2) heterotrimer. Furthermore, VP23 was observed to have a sedimentation coefficient of 4.9S, suggesting that this protein exists as a dimer in solution. Deletion analysis of VP19C revealed two domains that may be required for attachment of the triplex to major capsid-scaffold protein complexes; none of the deletions disrupted interaction of VP19C with VP23. We propose that preformed triplexes (VP19C-VP23(2) heterotrimers) interact with major capsid-scaffold protein complexes during assembly of the HSV-1 capsid.

Structure of the herpes simplex virus capsid: peptide A862-H880 of the major capsid protein is displayed on the rim of the capsomer protrusions.

The herpes simplex virus-1 (HSV-1) capsid shell has 162 capsomers arranged on a T = 16 icosahedral lattice. The major capsid protein, VP5 MW = 149,075) is the structural component of the capsomers. VP5 is an unusually large viral capsid protein and has been shown to consist of multiple domains. To study the conformation of VP5 as it is folded into capsid promoters, we identified the sequence recognized by a VP5-specific monoclonal antibody and localized the epitope on the capsid surface by cryoelectron microscopy and image reconstruction. The epitope of mAb 6F10 was mapped to residues 862-880 by immunoblotting experiments performed with (1) proteolytic fragments of VP5, (2) GST-fusion proteins containing VP5 domains, and (3) synthetic VP5 peptides. As visualized in a three-dimensional density map of 6F10-precipitated capsids, the antibody was found to bind at sites on the outer surface of the capsid just inside the openings of the trans-capsomeric channels. We conclude that these sites are occupied by peptide 862-880 in the mature HSV-1 capsid.

Assembly of the herpes simplex virus capsid: characterization of intermediates observed during cell-free capsid formation.

The herpes simplex virus-1 (HSV-1) capsid is an icosahedral shell approximately 15 nm thick and 125 nm in diameter. Three of its primary structural components are a major capsid protein (VP5; coded by the UL19 gene) and two minor proteins, VP19C (UL38 gene) and VP23 (UL18 gene). Assembly of the capsid involves the participation of two additional proteins, the scaffolding protein (UL26.5 gene) and the maturational protease (UL26 gene). With the goal of identifying morphological intermediates in the assembly process, we have examined capsid formation in a cell-free system containing the five HSV-1 proteins mentioned above. Capsids and capsid-related structures formed during progressively longer periods of incubation were examined by electron microscopy of thin-sectioned specimens. After one minute, 90 minutes and eight hours of incubation the structures observed, respectively, were partial capsids, closed spherical capsids and polyhedral capsids. Partial capsids were two-layered structures consisting of a segment of external shell partially surrounding a region of scaffold. They appeared as wedges or angular segments of closed spherical capsids, the angle ranging from less than 30 degrees to greater than 270 degrees. Partial capsids are suggested to be precursors of closed spherical capsids because, whereas partial capsids were the predominant assembly product observed after one minute of incubation, they were rare in reactions incubated for 45 minutes or longer. Closed spherical capsids were highly uniform in morphology, consisting of a closed external shell surrounding a thick scaffold similar in morphology to the same layers seen in partial capsids. In negatively stained specimens, closed spherical capsids appeared round in profile, suggesting that they are spherical rather than polyhedral in shape. A three-dimensional reconstruction computed from cryoelectron micrographs confirmed that closed spherical capsids are spherical with T = 16 icosahedral symmetry. The reconstruction showed further that, compared to mature HSV-1 capsids, closed spherical capsids are more open structures in which the capsid floor layer is less pronounced. In contrast to closed spherical capsids, polyhedral capsids exhibited distinct facets and vertices, indicating that they are icosahedral like the capsids in mature virions. Upon incubation in vitro, purified closed spherical capsids matured into polyhedral capsids, indicating that the latter arise by angularization of the former. Partial capsids, closed spherical capsids and polyhedral capsids were all found to contain VP5, VP19C, VP23, VP21 and the scaffolding protein; the scaffolding protein being predominantly in the immature, uncleaved form in all cases. Polyhedral capsids and closed spherical capsids were found to differ in their sensitivity to disruption at 2 degrees C. Closed spherical capsids were disassembled while polyhedral capsids were unaffected. Our results suggest that HSV-1 capsid assembly begins with the partial capsid and proceeds through a closed, spherical, unstable capsid intermediate to a closed, icosahedral form similar to that found in the mature virion. Structures resembling HSV-1 partial capsids have been described as capsid assembly intermediates in Salmonella typhimurium bacteriophage P22. HSV-1 capsid maturation from a fragile, spherical state to a robust polyhedral form resembles the prohead maturation events undergone by dsDNA bacteriophages including lambda, T4 and P22. Because of this similarity, we propose the name procapsid for the closed spherical capsid intermediate in HSV-1 capsid assembly.

Genetic variation of abdominal fat, body weight, and carcass weight in a female broiler line.

Pedigreed matings in a commercial purebred female broiler selection line produced 311 males and 341 females, which were slaughtered at 50 days of age. Coefficients of variation of abdominal fat weights were higher than live and carcass weights. The coefficient of variation was reduced when abdominal fat was regressed on live weight or when percentage of live or carcass weight was used. Leaf fat was approximately two-thirds and gizzard fat was approximately one-third of the total abdominal fat. Heritabilities for abdominal fat were high, and the genetic correlations between the fat and live or carcass weights ranged from .43 to .50 in males and .32 to .40 in females. The phenotypic correlations between fat and live weight were reduced when abdominal fat weight was subtracted from live weight, showing that the part-whole relationship between abdominal fat included in live body weight increased the correlations. The heritabilities indicate that it should be possible to reduce abdominal fat by selection, and the genetic correlations signify that a method has to be devised to increase body weight while simultaneously reducing abdominal fat weight.

Abdominal and carcass fat in five broiler strains.

Ten males and 10 females from each of five commercial broiler strains were weighed and slaughtered at 55 days of age. Over all, mean live body weight was 2112 g for males and 1702 g for females and abdominal fat was 2.9% (males) and 3.3% (females). Mean total fat in whole bird was 13.4% (males) and 15.1% (females). There were no statistically significant differences between strains at the 5% level. Correlation coefficients with percent abdominal fat were .29 for body weight (males) and .36 (females), for percent carcass fat .51 (males) and .77 (females), and for fat free carcass .26 (males) and .07 (females). Abdominal fat represented 22% of the total fat for males and females. The results obtained were similar to those found previously in this laboratory with one strain of broilers.