Maxillary Sinus Elevation by Crestal Window: Influence of 3D Sinus Size on Bone Regeneration-A Retrospective Clinical and Histologic Evaluation.

This evaluation correlates maxillary sinus 3D morphology with bone regeneration. In 39 patients with crestal bone ≤ 2 mm, mineralized human bone allografts were used to augment the sinus floor through the crestal window sinus elevation approach. CBCT was used to measure the buccopalatal diameter (BPD), mesiodistal diameter (MDD), and hemi-ellipsoidal volume (Vh) in all sinuses. A bone core biopsy sample was taken at implant placement (4 to 5 months after sinus augmentation). Microradiographs of methacrylate-embedded sections were used to evaluate the amounts of bone, residual graft, and soft tissue. All 51 implants placed in the 39 patients successfully osseointegrated. A linear regression analysis showed that as BPD, MMD, and Vh increased, the amount of bone gain decreased and the amount of soft tissue increased (P < .05). The amount of residual graft was little affected by sinus morphology. Microradiographic data were grouped into four different sinus types (from small to great) using BPD and Vh medians. The best amount of bone formation was achieved in the narrow and short sinus type, while no great differences were found in the remaining three sinus types. Understanding of 3D sinus cavity morphology, especially the buccopalatal diameter and mesiodistal dimensions, is fundamental for achieving the best possible sinus augmentation outcomes.

Bone Remodeling and Bone Loss Around Subcrestal Implants: Two Distinct Entities.

Peri-implant marginal bone stability is one of the main features used to evaluate the long-term success of implant therapy. Radiographic marginal bone loss (MBL) up to 2 mm during the first year of function, followed by a maximum of 0.2 mm of loss annually, was among the traditionally accepted criteria defining implant success. Nowadays, improvements in implant design and clinical protocols allow for better preservation of peri-implant bone levels during the physiologic bone remodeling phase.

Influence of apico-coronal positioning of tissue-level implants on marginal bone stability during supracrestal tissue height establishment: A multi-center prospective study.

INTRODUCTION: Supracrestal tissue height establishment is a crucial factor influencing peri-implant marginal bone modifications prior to prosthesis delivery. If mucosal thickness is insufficient, peri-implant marginal bone resorption occurs to allow appropriate supracrestal tissue height formation. This study evaluates if marginal bone resorption occurring around tissue-level implants before prosthetic loading could be compensated by adapting apico-coronal positioning to mucosal thickness. METHODS: Patients requiring placement of one single implant in the posterior mandible were treated with tissue-level implants with a 3-mm high transmucosal machined component and moderately rough implant body. Based upon vertical mucosal thickness measured after buccal flap reflection, implants were placed with the treated part: (group 1) 2 mm below crestal level in presence of thin mucosa (<2.5 mm); (group 2) 1 mm below the crestal level in presence of medium mucosa (2.5-3.5 mm); (group 3) at equicrestal level in presence of thick mucosa (>3.5 mm). RESULTS: Forty-nine implants, placed in 49 patients were included in final analysis (group 1: 18 implants; group 2: 16 implants; group 3: 15 implants). Mean marginal bone resorption after 5 months of healing was 0.66 ± 0.49 mm, 0.32 ± 0.41 mm, and 0.22 ± 0.52 mm in groups 1, 2, and 3, respectively. Inter-group analysis highlighted significant differences between the three groups after ANOVA test (p = 0.025). However, adaptation of apico-coronal implant positioning in relation to mucosal thickness, allowed to avoid early exposure of the treated surface in 100%, 93.7%, and 53.3% of the implants in groups 1, 2, and 3, respectively. CONCLUSION: During supracrestal tissue height formation, tissue-level implants inserted adapting apico-coronal positioning in relation to mucosal thickness exhibited greater marginal bone resorption at sites with thin mucosa than at sites with medium or thick mucosa. However, anticipating supracrestal tissue height establishment by adapting apico-coronal implant positioning in relation to mucosal thickness may effectively prevent unwanted exposure of treated implant surface.

Intraoperative complications and early implant failure after transcrestal sinus floor elevation with residual bone height ≤5 mm: A retrospective multicenter study.

OBJECTIVE: Clinical indications for maxillary sinus floor elevation with transcrestal techniques have increased in recent years even in sites with minimal residual bone height (RBH). Nevertheless, limited information is currently available on incidence of intraoperative complications and early implant failure in these cases. MATERIAL AND METHODS: This retrospective multicenter study was performed on anonymized clinical and radiographic records of patients who underwent transcrestal sinus floor elevation in seven clinical centers. Influence of different factors related to patient, and sinus anatomy and surgical technique on the incidence of intraoperative complications and early implant failure rate after transcrestal sinus lift were investigated. RESULTS: A total of 430 patients treated with transcrestal sinus floor elevation for single-implant insertion in sites with RBH ≤5 mm were included in the final analysis. After 1 year of loading, 418 implants of 430 were satisfactorily in function. Early implant failure was recorded in 12 cases (2.8%); results were significantly associated with the presence of large sinus cavities and with the occurrence of membrane perforation. The following adverse events were recorded: membrane perforation (7.2%), acute sinusitis (0.9%), implant displacement into the sinus cavity (0.7%), oro-antral fistula (0.2%), and benign paroxysmal positional vertigo (0.5% of osteotome cases). A strong direct correlation between sinus membrane perforation and bucco-palatal sinus width (p = .000) was demonstrated. CONCLUSIONS: Early implant failure after transcrestal sinus elevation showed significant direct correlation with bucco-palatal maxillary sinus width and the presence of membrane perforation. Sinus membrane perforation was strongly associated with bucco-palatal sinus width (extremely low perforation rate in narrow and much higher incidence in wide sinuses).

Three-Punch Alveolar Ridge Reconstruction Technique: A Novel Flapless Approach in Eight Consecutive Cases.

This clinical and histologic case series aims to evaluate a novel flapless approach to alveolar ridge reconstruction (ARR) of compromised extraction sockets by means of collagenated xenograft sealed with three resorbable layers of hole-punched membrane. Eight postextraction sockets without buccal and/or palatal bone walls and with adjacent natural teeth from eight consecutive patients were included. Pretreatment CBCT scanning was performed. After debridement of the selected sites, a flapless grafting procedure was carried out, and the three-membrane protection was applied. After 6 to 17 months, at implant placement, a posttreatment alveolar ridge CBCT was taken, and a bone core biopsy sample was harvested for histologic and morphometric analyses. Clinical outcomes showed predictable horizontal bone regeneration in all postextraction sockets with good preservation of soft tissue architecture. Pretreatment ridge CBCT measurements showed limited bone width (2.6 ± 1.08 mm). Posttreatment measurements revealed adequate bone width (9.05 ± 1.29 mm) with a mean bone gain of 6.4 ± 1.34 mm. Histologic and morphometric analyses revealed the absence of inflammatory cells and the presence of 25.4% ± 8.7% of new bone and 31.8% ± 8.3% of graft particles inside the biopsy samples. Many graft particles were surrounded and interconnected by new bone, thus demonstrating the formation of a bone-graft network. Rare osteoclasts were found. This novel technique seems to be effective in treating alveolar sockets prior to implant placement, preventing inflammation and bone resorption and promoting bone regeneration.

Influence of abutment height and vertical mucosal thickness on early marginal bone loss around implants: A randomised clinical trial with an 18-month post-loading clinical and radiographic evaluation.

PURPOSE: To investigate the influence of vertical mucosal thickness on marginal bone loss around implants with short and long prosthetic abutments and the marginal bone loss progression rate up to 18 months after prosthetic loading. MATERIALS AND METHODS: Internal hex platform-switched implants were placed equicrestally using a two-stage protocol in the posterior mandible of two groups of patients with different vertical mucosal thickness, thin (≤ 2.0 mm) and thick (> 2.0 mm). Elevated prosthetic abutments of different heights (1 mm or 3 mm) were randomly assigned for single screw-retained crowns in both groups. Mesial and distal marginal bone loss were measured at implant placement (T0) and crown delivery (after 4 months [T1]), and after 6 (T2), 12 (T3) and 18 months (T4) of functional loading. RESULTS: Eighty implants were placed in eighty patients. Three patients dropped out at T2. At T4, 74 out of 77 implants were functioning, resulting in a 96% survival rate. Marginal bone loss (mean ± SE) at T2 was significantly greater in the 1-mm abutment groups (0.61 ± 0.09 mm with thin mucosa; 0.64 ± 0.07 mm with thick mucosa) than in the 3-mm abutment groups (0.32 ± 0.07 mm with thin mucosa; 0.26 ± 0.04 mm with thick mucosa). The marginal bone loss pattern over 18 months of loading showed that the greatest amount of marginal bone loss occurred during the first 6 months of function. CONCLUSIONS: Internal hex platform-switched implants placed equicrestally and restored with 1-mm abutments presented greater marginal bone loss than identical implants with 3-mm abutments, with vertical mucosal thickness having no significant influence.

Minimally Invasive Management of Implant-Supported Rehabilitation in the Posterior Maxilla, Part II. Surgical Techniques and Decision Tree.

Insufficient crestal bone is a common feature encountered in the edentulous posterior maxilla due to atrophy of the alveolar ridge and maxillary sinus pneumatization. Numerous surgical techniques, grafting materials, and timing protocols have been proposed for implant-supported rehabilitation of posterior maxillae with limited bone height. In the majority of potential implant sites, residual bone height is less than 8 mm and the clinician has to select either a lateral or transcrestal sinus-elevation technique or placing short implants as the correct surgical option. Nevertheless, guidelines for selecting the best option remains mostly based on the personal experience and skills of the surgeon. The role of sinus anatomy in healing and graft remodeling after sinus floor augmentation is crucial. In addition to the evaluation of residual bone height, the clinician should consider that histologic and clinical outcomes are also influenced by the buccal-palatal bone wall distance. Therefore, three main clinical scenarios may be identified and treated with either a lateral or transcrestal sinus-elevation technique or short implants. This article introduces a new decision tree for a minimally invasive approach based on current evidence to help the clinician safely and predictably manage implant-supported treatment of the atrophic posterior maxilla.

Minimally Invasive Management of Implant-Supported Rehabilitation in the Posterior Maxilla, Part I. Sinus Floor Elevation: Biologic Principles and Materials.

Alveolar bone resorption and maxillary sinus pneumatization occurring after dental extraction in the posterior region of the maxilla may be problematic when planning implant-supported rehabilitation. Various regenerative options are available, including guided bone regeneration, bone block grafts, and lateral sinus augmentation. These procedures are associated with significant complication rates, high morbidity, increased therapy duration, and high cost. Less invasive approaches, such as transcrestal sinus floor elevation, and using short implants have been proposed in an attempt to reduce these drawbacks. The aim of this study is to analyze available evidence to suggest predictable options and identify minimally invasive management of implant-supported rehabilitation in the posterior maxilla. This article concerns biologic mechanisms regulating new bone formation after maxillary sinus augmentation and examines characteristics of available implants and grafting materials to help the clinician select the most rational and convenient surgical approach according to specific situations.

Clinical and histological reaction of periodontal tissues to subgingival resin composite restorations.

OBJECTIVES: To compare the clinical and histological response of supracrestal periodontal tissues to subgingival composite restorations versus natural root surfaces MATERIAL AND METHODS: In 29 subjects with a single tooth requiring subgingival restorations, a deep margin elevation (DME) procedure with composite resin was applied. Full-mouth plaque score (FMPS), full-mouth bleeding score (FMBS), and focal probing depth (PD) were measured at baseline, before DME, and after 3 months. The distance between the coronal marked (CM) point to the apical margin of the composite reconstruction (AMR), at baseline, and to the tip of the periodontal probe inserted to reach the bottom of the sulcus (APP), 3 months later, was measured. An all-around secondary flap, harvested to ensure the subsequent single-crown prosthetic rehabilitation was histologically processed. The histological inflammation degree was evaluated in areas of gingival tissues adjacent to the composite (group B) and adjacent to the natural surface of each single tooth (group A). RESULTS: Significant FMPS, FMBS, and PD decreases were observed (p < 0.05). CM-AMR and CM-APP were significantly different (p < 0.05), suggesting an attachment gain after 3-months. The inflammation level of gingival tissue was similar in groups A and B (p > 0.05). CONCLUSIONS: For the first time, this topic was clinically and histologically studied in humans. Subgingival restorations resulted compatible with gingival health, with levels similar to that of untreated root surfaces. CLINICAL RELEVANCE: Deep margin elevation procedure produces favorable clinical and histological outcomes allowing a routine utilization in reconstructive dentistry.

Descriptive retrospective study analyzing relevant factors related to dental implant failure

BACKGROUND: The objective of this retrospective descriptive study was to analyze the characteristics of incident reports provided by dentists while using a specific brand of dental implants. MATERIAL AND METHODS: The study was carried out in collaboration with Oxtein Iberia S.L.(R), with the company providing access to the incident database in order to evaluate the characteristics of incidents from January 2014 to December 2017 (a total of 917 over four years). The data sheet recorded different variables during each of the stages of implant treatment, from initial implant placement to subsequent prosthetic rehabilitation. These variables included age, sex, systemic pathologies, smoking habits, bone quality, implant type, prosthesis type, and type of load applied, among others. SPSS Statistics was used to perform statistical analysis of the qualitative variables (univariate logistic regressions, χ2 test, Haberman's adjusted standardized residuals). RESULTS: The total study sample consisted of 44,415 implants shipped from Oxtein (R) warehouses on the dates indicated, of which 917 implants (2.1%) were flagged due to reports of lack of primary stability, failed osseointegration, or implant failure within one year of placement. When analyzing incident reports, it was observed that 61.6% of incidents occurred in male patients, compared to 38.4% in female patients. The average age of patients in the reported cases was 56.12 ± 12.15 years. A statistically significant correlation was discovered between incidents of implant failure and tobacco use, diabetes, heart disease, poor oral hygiene, previous infection, poor bone quality, and bruxism (p < 0.05). A (statistically significant) higher rate of incidents was also observed in tapered, internal connection, Grade IV titanium, narrow, and short implants. CONCLUSIONS: Analysis of these implants reveals a higher rate of complication in short, tapered, internal connection and narrow-diameter implants. These data can help and encourage clinicians to use the utmost surgical precautions when placing these implants

No disponible

Biological width establishment around dental implants is influenced by abutment height irrespective of vertical mucosal thickness: A cluster randomized controlled trial.

OBJECTIVE: Prosthetic abutment height and peri-implant mucosal thickness are considered factors that influence marginal bone remodeling during biological width establishment around dental implants. However, no clinical studies have evaluated their simultaneous effect on marginal bone loss (MBL). This study analyzes the influence of abutment height on MBL around implants surrounded by both thin and thick mucosa up to 12 months after prosthetic loading. MATERIAL AND METHODS: Seventy platform-switched implants with internal hex were placed equicrestally in two groups of patients with different vertical mucosal thickness: thin (≤2.0 mm) and thick mucosa (>2.0 mm). After three months of submerged healing, prosthetic abutments with a height of 1 mm (short) or 3 mm (long) were randomly assigned for single crown screwed restoration in both groups. MBL was evaluated on radiographs taken at implant placement (T0 ), restoration delivery (T1 ), and after 6 months (T2 ) and 12 months (T3 ) of loading. RESULTS: After 12 months of loading, 66 implants were functioning (two dropouts, two failures), resulting in a 97% survival rate. Compared with T0 , mean MBL at T3 ranged between 0.59 and 0.80 mm in short abutment groups and between 0.28 and 0.37 mm in long abutment groups. Differences resulted statistically significant, irrespective of vertical peri-implant mucosal thickness. The MBL pattern over time showed the greatest amount of bone resorption in the first 6 months after loading, particularly around implants with short abutments. CONCLUSIONS: Platform-switched implants restored with short abutments present greater marginal bone loss than identical implants with long abutments, without significant peri-implant mucosal thickness effects.

Minimum Abutment Height to Eliminate Bone Loss: Influence of Implant Neck Design and Platform Switching.

PURPOSE: This retrospective study quantitatively analyzed the minimum prosthetic abutment height to eliminate bone loss after 4.7-mm-diameter implant placement in maxillary bone and how grafting techniques can affect the marginal bone loss in implants placed in maxillary areas. MATERIALS AND METHODS: Two different implant types with a similar neck design were singularly placed in two groups of patients: the test group, with platform-switched implants, and the control group, with conventional (non-platform-switched) implants. Patients requiring bone augmentation underwent unilateral sinus augmentation using a transcrestal technique with mineralized xenograft. Radiographs were taken immediately after implant placement, after delivery of the prosthetic restoration, and after 12 months of loading. RESULTS: The average mesial and distal marginal bone loss of the control group (25 patients) was significantly more than twice that of the test group (26 patients), while their average abutment height was similar. Linear regression analysis highlighted a statistically significant inverse relationship between marginal bone loss and abutment height in both groups; however, the intercept of the regression line, both mesially and distally, was 50% lower for the test group than for the control group. The marginal bone loss was annulled with an abutment height of 2.5 mm for the test group and 3.0 mm for the control group. No statistically significant differences were found regarding marginal bone loss of implants placed in native maxillary bone compared with those placed in the grafted areas. CONCLUSION: The results suggest that the shorter the abutment height, the greater the marginal bone loss in cement-retained prostheses. Abutment height showed a greater influence in platform-switched than in non-platform-switched implants on the limitation of marginal bone loss.

Soft Tissue Enhancement and Implant Placement Following Partial Mandibulectomy Due to Squamous Cell Carcinoma.

Many dental procedures allow for implant placement in partially or totally edentulous patients. Despite the availability of various implant and abutment types on the market, it often becomes quite challenging to achieve the biological and esthetic goals in a patient who has ridge deficiencies. Problems arise from the lack of adequate bone quality and quantity. 1 , 2 Soft tissue form and maintenance is also a consideration to evaluate. 3 Primary reconstructive techniques following segmental mandibulectomy is evolving and improves quality of life. A seldom encountered complication is the discovery and treatment of a malignant process (for example, squamous cell carcinoma). Oral squamous cell carcinoma (OSCC) is one of the most aggressive malignancies worldwide and accounts for more than 90% of all oral cancers. 4 It is ranked as the sixth leading cause of cancer mortality worldwide. The most common sites of OSCC are the lateral ventral surface of the tongue, the floor of the mouth and buccal mucosa. For most oral cavity cancers, surgery is the initial treatment of choice (often involving the full or partial removal of bony jaw structure). 5 Radiation or chemoradiation is added postoperatively if disease is more advanced or has high-risk features. Successful cancer therapy can affect the quantity and quality of soft tissue in areas where implants are planned, thus affecting the initial placement and the long-term success of the implants. Complications can be numerous; especially difficult is implant treatment in the mandibular anterior area where inadequate alveolar height results in the lingual floor and the vestibule becoming contiguous. 6 Further complicating treatment is the presence of scar tissue (often found following cancer surgery and radiotherapy). The present case is a report of the combination of a soft tissue enhancement and implant placement following partial mandibulectomy resulting from the treatment of oral squamous cell carcinoma. A video abstract is available for viewing at https://youtu.be/dZ9t3j4ufOc?list=PLvRxNhB9EJqbqjcYMbwKbwi8Xpbb0YuHI .

Hybrid and fully-etched surface implants in periodontally healthy patients: A comparative retrospective study on marginal bone loss.

BACKGROUND: Human studies on implants with the same design but with different surfaces are lacking at the present time. PURPOSE: The aim of this study was to compare the survival rate of and marginal bone loss (MBL) around 2 types of implants with the same design, but with different surfaces: fully "sandblasted and double-etched" (SDE) implants and hybrid (H) implants, with an apical SDE-surface and a coronal machined-surface. MATERIALS AND METHODS: The SDE- and H-surfaces were previously analyzed under SEM and profilometer. Implants were placed in partially edentulous periodontally healthy patients requiring single implant-restoration, in either mandible or maxilla, with cement-retained prosthetic restoration. Twelve months after prosthetic loading, MBL in relation to prosthetic abutment height (AH), calculated radiographically, was statistically analyzed. RESULTS: SEM and profilometer analyses revealed no differences between the SDE-surfaces of either SDE- or H-implants. Transverse ridges and grooves characterized the machined portion of H-implants, clearly influencing the profilometer analysis. In 75 patients, 37 SDE and 38 H-implants were placed and all functioned completely after 12 months. In both SDE- and H-groups, MBL had a significant inverse relationship with AH, with greater intercept and negative slope for SDE-group and intersection of the 2 regression lines at AH = 2 mm. CONCLUSIONS: A 100% survival rate was recorded for SDE- and H-implants placed in pristine bone of periodontally healthy patients; MBL was limited and similar in both SDE- and H-groups; the higher the prosthetic AH, the lesser the MBL around implants; H-implants could reduce bone loss most effectively with abutments lower than 2 mm, realistically exploitable on thin biotypes; SDE-implants could reduce bone loss most effectively with abutments greater than 2 mm, realistically exploitable on thick biotypes.

Hybrid Implants in Healthy and Periodontally Compromised Patients: A Preliminary Clinical and Radiographic Study.

This preliminary clinical and radiographic study examined the survival of, the marginal bone loss (MBL) around, and the influence of prosthetic abutment height (AH) on MBL around hybrid implants placed in two groups of partially edentulous patients: healthy (HPs) and periodontally compromised (PCPs) patients. A total of 93 patients requiring single or multiunit implant restoration, in the mandible or maxilla, were treated while undergoing cement-retained prosthetic restoration. A total of 54 implants (35 in the maxilla and 19 in the mandible) were placed in 45 HPs, and 56 implants (31 in the maxilla and 25 in the mandible) in 48 PCPs. All 110 hybrid implants positioned in pristine bone provided a 100% survival rate in both HPs and PCPs. No statistical differences were recorded comparing the MBL values of maxillae with those of mandibles. In HPs and PCPs, a similar and limited amount of MBL was recorded, and it was found that the higher the AH, the less MBL. In conclusion, results indicate that the hybrid implants examined could reduce the risk of peri-implantitis due to their coronal machined surfaces and improve osseointegration due to their apical rough surfaces.

The maintenance of inserted titanium implants: in-vitro evaluation of exposed surfaces cleaned with three different instruments.

OBJECTIVE: Changes to titanium implants smooth-surfaces after instrumentation were comparatively analyzed using low-vacuum scanning electron microscopy (LV-SEM) and white-light confocal (WLC) profilometry, to accurately evaluate curved surfaces. MATERIAL AND METHODS: Sixty titanium implants screwed to their abutments were randomly split into three groups for cleaning treatment with (S) stainless-steel Gracey-curettes, (T) titanium Langer-curettes, and (P) an ultrasonic-device with the probe covered with a plastic-tip. One sector of each implant was left unprocessed (U). The other sectors were cleaned for either 60 s, to simulate a single cleaning session, or 180 s to simulate a series of sessions. Surface morphology was analyzed by LV-SEM, without metal sputtering. Quantitative evaluations of the roughness of surfaces were performed using a WLC-profilometer. The Wilcoxon and the Mann-Whitney tests were used in statistical comparisons. RESULTS: U-surfaces showed that thin transverse ridges and grooves, i.e. a polarized surface roughness was substantially compromised after S-instrumentation. Small surface alterations, increasing with time, were also recorded after T-·and·P-instrumentation, although to a lesser degree. The gap of the fixture-abutment connection appeared almost completely clean after T-, clotted with titanium debris after S-, and clotted with plastic debris after P-treatment. The mean roughness (Ra) was unchanged after P-, significantly increased after S- and decreased after T-treatment, when compared with U. The Rz roughness-parameter, calculated along the fixture Y-axis, of S, T, and P resulted similar and significantly lower than that of U. Rz (X-axis) resulted unchanged after P-, slightly increased (+40%) after T-, and greatly increased (+260%) after S-treatment, this latter being statistically significant when compared with U. CONCLUSIONS: The careful use of titanium-curettes could produce only minimal smooth surface alteration particularly over prolonged treatments, and avoid debris production that could endanger implant preservation.

Piezosurgical treatment of crestal bone: quantitative comparison of post-extractive socket outcomes with those of traditional treatment.

OBJECTIVE: The study aimed to quantitatively compare, for the first time, the clinical outcomes of crestal bone volume resorption in sockets undergoing traditional extraction technique (TET) or piezosurgical extraction technique (PET), also considering the influence of buccal plate thickness. MATERIAL AND METHODS: In this prospective study, 19 sockets were randomly treated with TET, and 18 sockets were randomly treated with PET. Furthermore, patients were split into subgroup A, with buccal bone plate thickness (BPT) ≤1 mm, and subgroup B, with BPT>1 mm. Buccal (BCH) and palatal (PCH) cortex height, bucco-palatal ridge (BPR) width were monitored at tooth extraction and after the 4-month post-extractive period of natural healing. RESULTS: After 4 months, BCH, PCH and BPR width decreased more in the TET than in the PET group, but only the BPR decrease was statistically significant (P = 0.034) after ANOVA test. In both TET and PET groups, all B subgroup patients showed a lower decrease than A subgroup patients for both BCH, PCH and BPR, statistically significant for PCH (P = 0.019) and BPR (P < 0.001) of TET group, and BPR (P = 0.002) of PET group, after ANOVA. Both A and B subgroups of PET showed a statistically significant lower decrease than the corresponding subgroups of TET, comparing A (P = 0.005) and B (P = 0.037) subgroups for BPR, after ANOVA. CONCLUSIONS: With both thin and thick buccal plates, the piezosurgical extraction technique of teeth significantly decreases the horizontal resorption of the hard tissue ridge, but not the vertical resorption. Moreover, buccal plate thickness seems to be a key factor in post-extractive bone resorption: the thinner the buccal plate the greater the horizontal crestal bone loss.

Stage Characterization and Marginal Bone Loss Evaluation Up to 96 Months of Crestal Sinus Augmentation With Sequential Drills: A Retrospective Study.

INTRODUCTION: The 2-stage crestal approach to augment the maxillary sinus is a little-used technique. The aim of this retrospective study was to assess events characterizing stages of this technique after implant placement in the posterior maxilla with residual bone height less than 4 mm and evaluate the marginal bone loss (MBL) changes over time. MATERIAL AND METHODS: Thirty-three patients underwent unilateral sinus augmentations using the trancrestal technique with mineralized allograft. Six-months (6 m) after first surgery, if skeletal subsidence prevented insertion of a 10-mm-length implant, additional grafting was performed during implant (n = 33) insertion. Radiographs were taken before grafting (baseline), immediately after and at 6 months; immediately after and 6 months after implant placement; and at follow-up (24-96 m). RESULTS: One implant was lost (ISR = 96.97%). Of the remaining 32 patients, 14 (A group) underwent standard implant placement, whereas 18 (B group) underwent additional grafting immediately before implant placement. Given that B-group patients initially obtained lower crestal bone height after first surgery, additional grafting procedures provided greater crestal height in the B group. A significant relationship between ending (eMBL) and 6mMBL was found in both groups, with greater values in the B group. However, in both groups, eMBL was always greater if 6mMBL was greater than 0.44 mm. DISCUSSION: Results suggest a high and low skeletal-reactivity patient categorization. In both patient categories, MBL greatly depends upon 6-month values. Investigations are necessary to relate sinus size with results obtained by this 2-stage crestal approach. CONCLUSIONS: The 2-stage crestal sinus lift procedure not only provides predictable results, but also allows low skeletal-reactivity patient recovery.

Maxillary sinus augmentation by crestal access: a retrospective study on cavity size and outcome correlation.

OBJECTIVE: Cone-beam computed tomography (CBCT) and radiographic outcomes of crestal sinus elevation, performed using mineralized human bone allograft, were analyzed to correlate results with maxillary sinus size. MATERIAL AND METHODS: A total of 60 sinus augmentations in 60 patients, with initial bone ≤5 mm, were performed. Digital radiographs were taken at surgical implant placement time up to post-prosthetic loading follow-up (12-72 months), when CBCT evaluation was carried out. Marginal bone loss (MBL) was radiographically analyzed at 6 months and follow-up time post-loading. Sinus size (BPD), implant distance from palatal (PID) and buccal wall (BID), and absence of bone coverage of implant (intra-sinus bone loss--IBL) were evaluated and statistically evaluated by ANOVA and linear regression analyses. RESULTS: MBL increased as a function of time. MBL at final follow-up was statistically associated with MBL at 6 months. A statistically significant correlation of IBL with wall distance and of IBL/mm with time was identified with greater values in wide sinuses (WS ≥ 13.27 mm) than in narrow sinuses (NS < 13.27 mm). CONCLUSIONS: This study is the first quantitative and statistically significant confirmation that crestal technique with residual ridge height <5 mm is more appropriate and predictable, in terms of intra-sinus bone coverage, in narrow than in WS.

Guided "sandwich" technique: a novel surgical approach for safe osteotomies in the treatment of vertical bone defects in the posterior atrophic mandible: a case report.

PURPOSE: A novel technique to perform safe osteotomies during inlay block regenerative procedures in the posterior atrophic mandible is described. MATERIAL AND METHODS: A 52-year-old male patient with vertical atrophy of the left posterior mandible was treated adopting an inlay block "sandwich" technique using an allogenic cancelous block and a mixture of mineralized and demineralized human bone allograft in putty form as graft. The horizontal osteotomy for the lifting of the osteotomized bone segment was performed using a template prepared from a virtual anatomical replica of the patient's mandible obtained from cone beam computed tomography data. In the second surgical phase, 3 months after the augmentation, 2 implants were easily placed. RESULTS: The horizontal osteotomy was carried out, with no risk, very close to the nerve structures after the precise osteotomy line established preoperatively on the three-dimensional computed tomography (3D-CT) virtual reconstruction. No neurological complications were observed in the first days after the procedure, and no subsequent problems were recorded during the 3-month healing period. CONCLUSION: Radiographic evaluations and complication-free clinical healing demonstrate the effectiveness of this technique to obtain safe and precise osteotomies.