Advances in Biological Wastewater Treatment Processes: Focus on Low-Carbon Energy and Resource Recovery in Biorefinery Context.

Advancements in biological wastewater treatment with sustainable and circularity approaches have a wide scope of application. Biological wastewater treatment is widely used to remove/recover organic pollutants and nutrients from a diverse wastewater spectrum. However, conventional biological processes face challenges, such as low efficiency, high energy consumption, and the generation of excess sludge. To overcome these limitations, integrated strategies that combine biological treatment with other physical, chemical, or biological methods have been developed and applied in recent years. This review emphasizes the recent advances in integrated strategies for biological wastewater treatment, focusing on their mechanisms, benefits, challenges, and prospects. The review also discusses the potential applications of integrated strategies for diverse wastewater treatment towards green energy and resource recovery, along with low-carbon fuel production. Biological treatment methods, viz., bioremediation, electro-coagulation, electro-flocculation, electro-Fenton, advanced oxidation, electro-oxidation, bioelectrochemical systems, and photo-remediation, are summarized with respect to non-genetically modified metabolic reactions. Different conducting materials (CMs) play a significant role in mass/charge transfer metabolic processes and aid in enhancing fermentation rates. Carbon, metal, and nano-based CMs hybridization in different processes provide favorable conditions to the fermentative biocatalyst and trigger their activity towards overcoming the limitations of the conventional process. The emerging field of nanotechnology provides novel additional opportunities to surmount the constraints of conventional process for enhanced waste remediation and resource valorization. Holistically, integrated strategies are promising alternatives for improving the efficiency and effectiveness of biological wastewater treatment while also contributing to the circular economy and environmental protection.

Hybrid electrosynthesis as non-genetic approach for regulating microbial metabolism towards waste valorization in circular framework.

Biogenic waste (solid/liquid/gaseous) utilization in biological processes has disruptive potential of inclining towards carbon neutrality, while producing diverse products output. Anaerobic fermentation (methanogenesis and acidogenesis) routes are crucial bioprocesses for production of various renewable chemicals (carboxylate platform/organic acids, short/medium chain alcohols, aldehydes, biopolymers) and fuels (methane, hydrogen, hythane, biodiesel and electricity), while individual operations posing process limitations on their conversion efficiency. Advantageous benefit of using the individual bioprocess technicalities is of utmost importance in the context of sustainability to conceptualize and execute integrated waste biorefinery. The opinion article intends to document/familiarize the waste-fed biorefinery potential with application of hybrid advancements towards multiple product/energy/renewable chemical spectrum leading to carbon neutrality bioprocesses. Unique and notable challenges with diverse process integrations along with electrochemical/interspecies-redox metabolites-materials synergy/enzymatic interventions are specifically emphasized on application-oriented waste feedstock potential towards achieving sustainability.

Cathodic selenium recovery in bioelectrochemical system: Regulatory influence on anodic electrogenic activity.

Metal(loid)s are used in various industrial activities and widely spread across the environmental settings in various forms and concentrations. Extended releases of metal(loid)s above the regulatory levels cause environmental and health hazards disturbing the ecological balance. Innovative processes for treating the metal(loid)-contaminated sites and recovery of metal(loid)s from disposed waste streams employing biotechnological routes provide a sustainable way forward. Conventional metal recovery technologies demand high energy and/or resource inputs, which are either uneconomic or unsustainable. Microbial electrochemical systems are promising for removal and recovery of metal(loid)s from metal(loid)-laden wastewaters. In this communication, a bioelectrochemical system (BES) was designed and operated with selenium (Se) oxyanion at varied concentrations as terminal electron acceptor (TEA) for reduction of selenite (Se4+) to elemental selenium (Se0) in the abiotic cathode chamber. The influence of varied concentrations of Se4+ towards Se0 recovery at the cathode was also evaluated for its regulatory role on the electrometabolism of anode-respiring bacteria. This study observed 26.4% Se0 recovery (cathode; selenite removal efficiency: 73.6%) along with organic substrate degradation of 74% (anode). With increase in the initial selenite concentration, there was a proportional increase in the dehydrogenase activity. Bioelectrochemical characterization depicted increased anodic electrogenic performance with the influence of varied Se4+ concentrations as TEA and resulted in a maximum power density of 0.034 W/m2. The selenite reduction (cathode) was evaluated through spectroscopic, compositional and structural analysis. X-ray diffraction and Raman spectroscopy showed the amorphous nature, while Energy Dispersive X-ray spectroscopy confirmed precipitates of the deposited Se0 recovered from the cathode chamber. Scanning electron microscopic images clearly depicted the Se0 depositions (spherical shaped; sized approximately 200 nm in diameter) on the electrode and cathode chamber. This study showed the potential of BES in converting soluble Se4+ to insoluble Se0 at the abiotic cathode for metal recovery.

Concomitant use of Azolla derived bioelectrode as anode and hydrolysate as substrate for microbial fuel cell and electro-fermentation applications.

The potential of deoiled Azolla pinnata biomass (DAB) as electrode and substrate was evaluated for microbial fuel cell (MFC) operation. The anode electrode was fabricated using biochar obtained by subjecting DAB to pyrolysis at 600 °C, while the reducing sugars after hydrolysis of DAB by acid pretreatment was used as substrate. The post pyrolyzed biochar (P-DAB) was characterized for structural and elemental functionalities using SEM, XRD and Raman spectroscopy, whereas the reducing sugar obtained from hydrolyzed DAB (H-DAB) was analyzed for its composition. Experimental results indicated that at a given 3 g COD/L resulted in a voltage of 382 mV with 65.6% of COD reduction in closed circuit (CC) mode of operation. Cyclic voltammetric analysis depicted maximum oxidative and reductive peak currents of 3.42 mA and -4.0 mA. Noticeable peaks were also identified in CC (-0.2 V to +0.2 V and -0.19 V to -0.3 V) and OC (+0.2 V to +0.4 V and -0.1 V to -0.3 V) corresponding to complex IV cytochrome c couples (cytochrome Cox (Cyt Cox)/cytochrome Crd (Cyt Crd)), signifying the participation of electron carriers during electron transfer. The microbiome diversity showed dominance of Proteobacteria, a phylum known for exo-electrogenic bacterial species. The DAB-derived products account to environmental sustainability and support circular bioeconomy in a biorefinery mode.

Microalgae-biorefinery with cascading resource recovery design associated to dairy wastewater treatment.

The potential of microalgae for the treatment of dairy wastewater (DWW) was studied by integrating with bioethanol production. At the end of treatment, organic carbon removal was observed to be 90% with simultaneous removal of nutrients. Biomass concentration increased from 3rd day and reached to a maximum of 1.4 g L-1 by the end of cycle. The biomolecular composition of microalgae comprised of 38% carbohydrates, 15% proteins and 22% lipids. Reducing sugars extracted from deoiled microalgae showed highest percentage of glucose (54.12%) than other monomers. The reducing sugars obtained were utilized for the production of bioethanol via yeast fermentation using Saccharomyces cerevisiae. This resulted in the production of ethanol (3G) upto 116.2 mg g-1 with simultaneous decrease in reducing sugars upto 92 mg g-1. The results obtained indicate potential of microalgae to produce multiple biobased products in a biorefinery framework.

Modified conductive polyaniline-carbon nanotube composite electrodes for bioelectricity generation and waste remediation.

Anode with good electrocatalytic capabilities is more specifically required to reduce the ohimic losses during microbial fuel cell (MFC) operation. Highly conductive polymers viz., Polyaniline (PANi) and Polyaniline/Carbon nanotube (PANi/CNT) composite were prepared by in situ oxidative chemical polymerization method. Anodes were fabricated independently by coating PANi and CNT/PANi composites on the surface of SSM. The fabricated electrodes were evaluated as anode against stainless steel mess (SSM) as cathode during MFC operation. Maximum bioelectricity generation was observed in SSM-PANi/CNT-anode with power density of 48 mW/m2 and COD removal efficiency of 80% compared with SSM-PANi-anode (38 mW/m2; 65%) and SSM-anode (28 mW/m2; 58%). Bioelectrochemical characterization of the electrode materials using cyclic voltammetry and electrochemical impedance spectroscopy showed high electrocatalytic activity of PANi/CNT composite electrode. The study concluded the efficiency of PANi/CNT composite electrodes as bioanode in operation of MFCs towards achieving increased bioelectricity production along with wastewater treatment.

Integrated ecotechnology approach towards treatment of complex wastewater with simultaneous bioenergy production.

Sequential integration of three stage diverse biological processes was studied by exploiting the individual process advantage towards enhanced treatment of complex chemical based wastewater. A successful attempt to integrate sequence batch reactor (SBR) with bioelectrochemical treatment (BET) and finally with microalgae treatment was studied. The sequential integration has showed individual substrate degradation (COD) of 55% in SBR, 49% in BET and 56% in microalgae, accounting for a consolidated treatment efficiency of 90%. Nitrates removal efficiency of 25% was observed in SBR, 31% in BET and 44% in microalgae, with a total efficiency of 72%. The SBR treated effluents fed to BET with the electrode intervention showed TDS removal. BET exhibited relatively higher process performance than SBR. The integration approach significantly overcame the individual process limitations along with value addition as biomass (1.75g/L), carbohydrates (640mg/g), lipids (15%) and bioelectricity. The study resulted in providing a strategy of combining SBR as pretreatment step to BET process and finally polishing with microalgae cultivation achieving the benefits of enhanced wastewater treatment along with value addition.