Freeze v/s air-dried alginate-pectin gel beads modified with sodium dodecyl sulphate for enhanced removal of copper ions.

This work presents a novel polymer-based adsorbent, Sodium Dodecyl Sulphate modified alginate-pectin gel beads (APS221) prepared via controlled freeze drying & air drying, for the removal of copper ions from the aqueous solution. This work also critically discusses the role played by various components and their concentrations in the success of APS221. Addition of pectin to alginate resulted into approximately 150 % increase in the metal removal performance of the adsorbent while addition of SDS into alginate-pectin complex enhanced the performance by 14 % approximately, taking the maximum adsorption capacity of final complex APS221 to 111.11 mg/g. Our characterization studies revealed that the adsorption happened predominantly by complexation and ion-exchange mechanisms, and hence despite having a higher surface area, freeze-dried variant showed lesser adsorption capacity than air-dried variant as there was a loss of ion-exchange sites resulting from breakage of crosslinking bonds due to chain elongation. The adsorption process was found to follow Langmuir isotherm and pseudo-second order kinetics with a good fit of experimental data. Further, operating parameters have been optimized via RSM to, simultaneously, maximize the utilization of the adsorbent and minimize the cost of the process. Stability studies showed that APS221 beads could be used up to eight cycles.

Recent advances in heavy metal removal by chitosan based adsorbents.

Chitosan, a low cost polymer, has been used in many studies for adsorption of heavy metal ions. This review covers the performance of all those adsorbents which were derived from chitosan for the adsorption of heavy metal ions in recent past. Further, the common chitosan modifications methods have been discussed in this paper among which crosslinking and grafting were found to be the most popular methods. Adsorption equilibrium and kinetics were also studied and Pseudo-second order kinetic model and Langmuir isotherm were found to be successful for modeling of most of the chitosan derivatives-metal adsorption experiments. Moreover, with focus on chitosan derivatives, effect of adsorbent structure on metal removal, adsorption mechanism, effect of co-existing ions on adsorption, adsorbent synthesis protocols and regeneration methods have been also discussed in great detail. Finally, fixed bed column design for industrial wastewater treatment was elaborated along with efficiency of chitosan based adsorbents in columns.