Interactions of fungi from fermented sausage with regenerated cellulose casings.

This research examined cellulolytic effects of fungi and other microbes present in cured sausages on the strength and stability of regenerated cellulose casings (RCC) used in the sausage industry. Occasionally during the curing process, RCC would split or fail, thereby leading to loss of product. The fungus Penicillium sp. BT-F-1, which was isolated from fermented sausages, and other fungi, which were introduced to enable the curing process, produced small amounts of cellulases on RCC in both liquid and solid cultivations. During continued incubation for 15-60 days in solid substrate cultivation (SSC) on RCC support, the fungus Penicillium sp isolate BT-F-1 degraded the casings' dry weights by 15-50% and decreased their tensile strengths by ~75%. Similarly commercial cellulase(s) resulted in 20-50% degradation of RCC in 48 h. During incubation with Penicillium sp BT-F-1, the surface structure of RCC collapsed, resulting in loss of strength and stability of casings. The matrix of industrial RCC comprised 88-93% glucose polymer residues with 0.8-4% xylan impurities. Premature casing failure appeared to result from operating conditions in the manufacturing process that allowed xylan to build up in the extrusion bath. The sausage fungus Penicillium sp BT-F-1 produced xylanases to break down soft xylan pockets prior to slow cellulosic dissolution of RCC.

Structural and functional characterization of a novel phosphatase from the Arabidopsis thaliana gene locus At1g05000.

The crystal structure of the protein product of the gene locus At1g05000, a hypothetical protein from A. thaliana, was determined by the multiple-wavelength anomalous diffraction method and was refined to an R factor of 20.4% (R(free) = 24.9%) at 3.3 A. The protein adopts the alpha/beta fold found in cysteine phosphatases, a superfamily of phosphatases that possess a catalytic cysteine and form a covalent thiol-phosphate intermediate during the catalytic cycle. In At1g05000, the analogous cysteine (Cys(150)) is located at the bottom of a positively-charged pocket formed by residues that include the conserved arginine (Arg(156)) of the signature active site motif, HCxxGxxRT. Of 74 model phosphatase substrates tested, purified recombinant At1g05000 showed highest activity toward polyphosphate (poly-P(12-13)) and deoxyribo- and ribonucleoside triphosphates, and less activity toward phosphoenolpyruvate, phosphotyrosine, phosphotyrosine-containing peptides, and phosphatidyl inositols. Divalent metal cations were not required for activity and had little effect on the reaction.

High-throughput purification and quality assurance of Arabidopsis thaliana proteins for eukaryotic structural genomics.

The Center for Eukaryotic Structural Genomics (CESG) has established procedures for the purification of Arabidopsis proteins in a high-throughput mode. Recombinant proteins were fused with (His)(6)-MBP tags at their N-terminus and expressed in Escherichia coli. Using an automated AKTApurifier system, fusion proteins were initially purified by immobilized metal affinity chromatography (IMAC). After cleavage of (His)(6)-MBP tags by TEV protease, (His)(6)-MBP tags were separated from target proteins by a subtractive 2nd IMAC. As a part of quality assurance, all purified proteins were subjected to MALDI-TOF and ESI mass spectrometry to confirm target identity and integrity, and determine incorporation of seleno-methionine (SeMet) and (15)N and (13)C isotopes. The protocols have been used successfully to provide high quality proteins that are suitable for structural studies by X-ray crystallography and NMR.

Protocols for production of selenomethionine-labeled proteins in 2-L polyethylene terephthalate bottles using auto-induction medium.

Protocols have been developed and applied in the high-throughput production of selenomethionine labeled fusion proteins using the conditional Met auxotroph Escherichia coli B834. The large-scale growth and expression uses a chemically defined auto-induction medium containing 125 mg L(-1) selenomethionine, salts and trace metals, other amino acids including 10 mg L(-1) of methionine, vitamins except vitamin B12, and glucose, glycerol, and alpha-lactose. A schematic for a shaker rack that can hold up to twenty-four 2-L polyethylene terephthalate beverage bottles in a standard laboratory refrigerated floor shaker is provided. The growth cycle from inoculation of the culture bottle through the growth, induction, and expression was timed to take approximately 24 h. Culture growth in the auto-induction medium gave an average final optical density at 600 nm of approximately 6 and an average wet cell mass yield of approximately 14 g from 2 L of culture in greater than 150 expression trials. A simple method for visual scoring of denaturing electrophoresis gels for total protein expression, solubility, and effectiveness of fusion protein proteolysis was developed and applied. For the favorably scored expression trials, the average yield of purified, selenomethionine-labeled target protein obtained after proteolysis of the fusion protein was approximately 30 mg. Analysis by mass spectrometry showed greater than 90% incorporation of selenomethionine over a approximately 8-fold range of selenomethionine concentrations in the growth medium, with higher growth rates observed at the lower selenomethionine concentrations. These protein preparations have been utilized to solve X-ray crystal structures by multiwavelength anomalous diffraction phasing.

Auto-induction medium for the production of [U-15N]- and [U-13C, U-15N]-labeled proteins for NMR screening and structure determination.

Protocols have been developed and applied for the high-throughput production of [U-15N]- or [U-13C-, U-15N]-labeled proteins using the conditional methionine auxotroph Escherichia coli B834. The large-scale growth and expression uses a chemically defined auto-induction medium containing salts and trace metals, vitamins including vitamin B12, and glucose, glycerol, and lactose. The results from nine expression trials in 2-L of the auto-induction medium (500 mL in each of four polyethylene terephthalate beverage bottles) gave an average final optical density at 600 nm of approximately 5, an average wet cell mass yield of approximately 9.5 g L(-1), and an average yield of approximately 20 mg of labeled protein in the six instances in which proteolysis of the fusion protein was observed. Correlations between the cell mass recovered, the level of protein expression, and the relative amounts of glucose, glycerol, and lactose in the auto-induction medium were noted. Mass spectral analysis showed that the purified proteins contained both 15N and 13C at levels greater than 95%. 1H-15N heteronuclear single quantum correlation spectroscopy as well as 13C; 15N-edited spectroscopy showed that the purified [U-15N]- and [U-13C, U-15N]-labeled proteins were suitable for structure analysis.

Comparison of cell-based and cell-free protocols for producing target proteins from the Arabidopsis thaliana genome for structural studies.

We describe a comparative study of protein production from 96 Arabidopsis thaliana open reading frames (ORFs) by cell-based and cell-free protocols. Each target was carried through four pipeline protocols used by the Center for Eukaryotic Structural Genomics (CESG), one for the production of unlabeled protein to be used in crystallization trials and three for the production of 15N-labeled proteins to be analyzed by 1H-15N NMR correlation spectroscopy. Two of the protocols involved Escherichia coli cell-based and two involved wheat germ cell-free technology. The progress of each target through each of the protocols was followed with all failures and successes noted. Failures were of the following types: ORF not cloned, protein not expressed, low protein yield, no cleavage of fusion protein, insoluble protein, protein not purified, NMR sample too dilute. Those targets that reached the goal of analysis by 1H-15N NMR correlation spectroscopy were scored as HSQC+ (protein folded and suitable for NMR structural analysis), HSQC+/- (protein partially disordered or not in a single stable conformational state), HSQC- (protein unfolded, misfolded, or aggregated and thus unsuitable for NMR structural analysis). Targets were also scored as X- for failing to crystallize and X+ for successful crystallization. The results constitute a rich database for understanding differences between targets and protocols. In general, the wheat germ cell-free platform offers the advantage of greater genome coverage for NMR-based structural proteomics whereas the E. coli platform when successful yields more protein, as currently needed for crystallization trials for X-ray structure determination.