Governance of Friedrich-Wintgen bound states in the continuum by tuning the internal coupling of meta-atoms.

Bound state in the continuum (BIC) is a phenomenon that describes the perfect confinement of electromagnetic waves despite their resonant frequencies lying in the continuous radiative spectrum. BICs can be realized by introducing a destructive interference between distinct modes, referred to as Friedrich-Wintgen BICs (FW-BICs). Herein, we demonstrate that FW-BICs can be derived from coupled modes of individual split-ring resonators (SRR) in the terahertz band. The eigenmode results manifest that FW-BICs are in the center of the far-field polarization vortices. Quasi-BIC-I keeps an ultrahigh quality factor (Q factor) in a broad momentum range along the Γ-X direction, while the Q factor of the quasi-BIC-II drops rapidly. Our results can facilitate the design of devices with high-Q factors with extreme robustness against the incident angle.

Terahertz disk resonator on a substrateless dielectric waveguide platform.

Resonant cavities are fundamental to and versatile for terahertz integrated systems. So far, integrated resonant cavities have been implemented in relatively lossy terahertz platforms. In this Letter, we propose a series of integrated disk resonators built into a low-loss substrateless silicon waveguide platform, where the resonances and associated quality factor (Q-factor) can be controlled via an effective medium. The measurement results demonstrate that the Q-factor can reach up to 9146 at 274.4 GHz due to the low dissipation of the platform. Additionally, these resonators show strong tunability of the resonance under moderate optical power. These terahertz integrated disk resonators can be employed in sensing and communications.

Circulating tumour DNA alterations: emerging biomarker in head and neck squamous cell carcinoma.

Head and Neck cancers (HNC) are a heterogeneous group of upper aero-digestive tract cancer and account for 931,922 new cases and 467,125 deaths worldwide. About 90% of these cancers are of squamous cell origin (HNSCC). HNSCC is associated with excessive tobacco and alcohol consumption and infection with oncogenic viruses. Genotyping tumour tissue to guide clinical decision-making is becoming common practice in modern oncology, but in the management of patients with HNSCC, cytopathology or histopathology of tumour tissue remains the mainstream for diagnosis and treatment planning. Due to tumour heterogeneity and the lack of access to tumour due to its anatomical location, alternative methods to evaluate tumour activities are urgently needed. Liquid biopsy approaches can overcome issues such as tumour heterogeneity, which is associated with the analysis of small tissue biopsy. In addition, liquid biopsy offers repeat biopsy sampling, even for patients with tumours with access limitations. Liquid biopsy refers to biomarkers found in body fluids, traditionally blood, that can be sampled to provide clinically valuable information on both the patient and their underlying malignancy. To date, the majority of liquid biopsy research has focused on blood-based biomarkers, such as circulating tumour DNA (ctDNA), circulating tumour cells (CTCs), and circulating microRNA. In this review, we will focus on ctDNA as a biomarker in HNSCC because of its robustness, its presence in many body fluids, adaptability to existing clinical laboratory-based technology platforms, and ease of collection and transportation. We will discuss mechanisms of ctDNA release into circulation, technological advances in the analysis of ctDNA, ctDNA as a biomarker in HNSCC management, and some of the challenges associated with translating ctDNA into clinical and future perspectives. ctDNA provides a minimally invasive method for HNSCC prognosis and disease surveillance and will pave the way in the future for personalized medicine, thereby significantly improving outcomes and reducing healthcare costs.

Terahertz metasurface for near-field beam conversion.

A uniform illumination over a screen is crucial for terahertz imaging. As such, conversion from a Gaussian beam to a flattop beam becomes necessary. Most of the current beam conversion techniques rely on bulky multi-lens systems for collimated input and operate in the far-field. We present a single metasurface lens to efficiently convert a quasi-Gaussian beam from the near-field region of a WR-3.4 horn antenna to a flattop beam. The design process is divided into three sections to minimize simulation time, and the conventional Gerchberg-Saxton (GS) algorithm is supplemented with the Kirchhoff-Fresnel diffraction equation. Experimental validation confirms that a flattop beam with an efficiency of 80% has been achieved at 275 GHz. Such high-efficiency conversion is desirable for practical terahertz systems and the design approach can be generally used for beam shaping in the near-field.

Terahertz inner and outer edge modes in a tetramer of strongly coupled spoof localized surface plasmons.

Photonic edge mode confining light in cavities of surface plasmons is beneficial in image and biosensor applications. In the terahertz band, however, the edge mode in a cavity of spoof localized surface plasmons has not matured sufficiently. Herein, a cost-effective strategy to achieve a terahertz photonic edge mode using a metasurface of strongly coupled fourfold spoof localized surface plasmons in a tetramer layout is demonstrated. The quality factors of edge modes decrease when the tetramer shrinks, as revealed by the terahertz dielectric functions. The edge modes that emerge can be categorized as inner and outer edge modes, as deduced from the simulated electric field distribution. Our results show that the edge modes are due to the interaction of spoof localized surface plasmons in the terahertz band.

Tuning symmetry-protected quasi bound state in the continuum using terahertz meta-atoms of rotational and reflectional symmetry.

Conventionally, a symmetry-protected quasi bound state of the continuum (BIC) becomes achievable by breaking the C2 symmetry of meta-atoms. Our work exhibits a novel approach to achieving dual band quasi-BIC by breaking the C2v symmetry into Cs symmetry. Also, we show that a single band quasi-BIC can be achieved by breaking the C2v symmetry into C2 symmetry. Our metasurface of C2v symmetry is composed of double gaps split ring resonator (DSRR), and it degrades to C2 symmetry when the double gaps are displaced in opposite directions. One band quasi-BIC can be observed occurring at around 0.36 and 0.61 THz respectively with the metasurface excited by x- and y-polarized terahertz radiation, respectively. A couple of dark dipole oscillator dominates the quasi-BIC at 0.36 THz, while a quadruple-like oscillator dominates the quasi-BIC at 0.61 THz. The damping ratio and coupling coefficients of the above single quasi-BIC are close to the orthogonal polarization of the incident terahertz wave. However, the metasurface of the DSRR array degrades down to Cs symmetry when the double gaps are displaced in the same directions. A dual band quasi-BIC (0.23 THz and 0.62 THz) is found to be sensitive to the y-polarized terahertz radiation. It is found that the inductive-capacitive (LC) resonance results in quasi-BIC at 0.23 THz, while a quadrupole-like oscillation results in quasi-BIC at 0.62 THz. The quasi-BIC at 0.62 THz has a higher coupling coefficient and lower damping ratio than quasi-BIC at 0.23 THz in a metasurface of Cs symmetry. The realization of the above locally symmetric breaking on the quasi-BIC of terahertz metasurfaces is helpful for the innovation of multi-band terahertz biosensors.

Metal-Air Field Emission Devices - Nano Electrode Geometries Comparison of Performance and Stability.

Air-channel devices have a special advantage due to the promise of vacuum-like ballistic transport in air, radiation insensitivity, and nanoscale size. Here, achieving high current at low voltage along with considerable mechanical stability is a primary issue. The comparative analysis of four planar and metallic electrode-pair geometries at 10 nm channel length is presented. The impact of nano-electrode-pair geometries on overall device performance is investigated. Air-channel devices are operated at the ultra-low voltage of 5 mV to demonstrate the device dynamics of air-channel devices at low power. Investigations focus on the direct tunneling (DT) mechanism which is dominant in the low-voltage regime. Comparative analysis of different electrode-pair geometries reveals two orders of magnitude increment in the current just by modulating the electrode-pair structure. Theoretical analysis suggests that the emission current is directly related to the active junction area within the metal-air-metal interface at the direct tunneling regime. The geometry-dependent mechanical stability of different electrode pairs is compared by imaging biasing triggered nanoscale structural changes and pulsed biasing stress analysis. The results and claims are confirmed and consolidated with the statistical analysis. Experimental investigations provide strong directions for high-performance and stable devices. In-depth theoretical discussions will enable the accurate modeling of emerging low-power, high-speed, radiation-hardened nanoscale vacuum electronics.

Reconfigurable hyperbolic polaritonics with correlated oxide metasurfaces.

Polaritons enable subwavelength confinement and highly anisotropic flows of light over a wide spectral range, holding the promise for applications in modern nanophotonic and optoelectronic devices. However, to fully realize their practical application potential, facile methods enabling nanoscale active control of polaritons are needed. Here, we introduce a hybrid polaritonic-oxide heterostructure platform consisting of van der Waals crystals, such as hexagonal boron nitride (hBN) or alpha-phase molybdenum trioxide (α-MoO3), transferred on nanoscale oxygen vacancy patterns on the surface of prototypical correlated perovskite oxide, samarium nickel oxide, SmNiO3 (SNO). Using a combination of scanning probe microscopy and infrared nanoimaging techniques, we demonstrate nanoscale reconfigurability of complex hyperbolic phonon polaritons patterned at the nanoscale with high resolution. Hydrogenation and temperature modulation allow spatially localized conductivity modulation of SNO nanoscale patterns, enabling robust real-time modulation and nanoscale reconfiguration of hyperbolic polaritons. Our work paves the way towards nanoscale programmable metasurface engineering for reconfigurable nanophotonic applications.

Nicotine Sensors for Wearable Battery-Free Monitoring of Vaping.

Nicotine, an addictive substance in tobacco products and electronic cigarettes (e-cigs), is recognized for increasing the risk of cardiovascular and respiratory disorders. Careful real-time monitoring of nicotine exposure is critical in alleviating the potential health impacts of not just smokers but also those exposed to second-hand and third-hand smoke. Monitoring of nicotine requires suitable sensing material to detect nicotine selectively and testing under free-living conditions in the standard environment. Here, we experimentally demonstrate a vanadium dioxide (VO2)-based nicotine sensor and explain its conductometric mechanisms with compositional analysis and density functional theory (DFT) calculations. For real-time monitoring of nicotine vapor from e-cigarettes in the air, the sensor is integrated with an epidermal near-field communication (NFC) interface that enables battery-free operation and data transmission to smart electronic devices to record and store sensor data. Collectively, the technique of sensor development and integration expands the use of wearable electronics for real-time monitoring of hazardous elements in the environment and biosignals wirelessly.

Rapid Conductometric Detection of SARS-CoV-2 Proteins and Its Variants Using Molecularly Imprinted Polymer Nanoparticles.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) biosensors have captured more attention than the conventional methodologies for SARS-CoV-2 detection due to having cost-effective platforms and fast detection. However, these reported SARS-CoV-2 biosensors suffer from drawbacks including issues in detection sensitivity, degradation of biomaterials on the sensor's surface, and incapability to reuse the biosensors. To overcome these shortcomings, molecularly imprinted polymer nanoparticles (nanoMIPs) incorporated conductometric biosensor for highly accurate, rapid, and selective detection of two model SARS-CoV-2 proteins: (i) receptor binding domain (RBD) of the spike (S) glycoprotein and (ii) full length trimeric spike protein are introduced. In addition, these biosensors successfully responded to several other SARS-CoV-2 RBD spike protein variants including Alpha, Beta, Gamma, and Delta. Our conductometric biosensor selectively detects the two model proteins and SARS-CoV-2 RBD spike protein variant samples in real-time with sensitivity to a detection limit of 7 pg mL-1 within 10 min of sample incubation. A battery-free, wireless near-field communication (NFC) interface is incorporated with the biosensor for fast and contactless detection of SARS-CoV-2 variants. The smartphone enabled real-time detection and on-screen rapid result for SARS-CoV-2 variants can curve the outbreak due to its ability to alert the user to infection in real time.

Terahertz transmissive half-wave metasurface with enhanced bandwidth: publisher's note.

This publisher's note contains corrections to Opt. Lett.46, 4164 (2021)OPLEDP0146-959210.1364/OL.431285.

Terahertz transmissive half-wave metasurface with enhanced bandwidth.

Polarization conversion is useful for studies of chiral structures in biology and chemistry, and for polarization diversity in communications. It is conventionally realized with wave plates, which, however, present challenges due to limited material availability, as well as narrow bandwidth and low efficiency at terahertz frequencies. To enhance bandwidth and efficiency, the concept of the Huygens' metasurface is adopted here for a transmissive half-wave plate. The half-wave metasurface is designed following the optimal frequency-independent circuit parameters provided by a broadband semi-analytical approach. Simulation results of an optimal design suggest that a 15-dB extinction ratio can be sustained from 219 GHz to 334 GHz, corresponding to a fractional bandwidth of 41.6%. The measured results indicate that the fabricated structure enables a 15-dB extinction ratio from 220 GHz to 303 GHz, with a cross-polarization transmission efficiency above 76.7% for both linear and circular polarizations. This half-wave metasurface design can be readily integrated into compact terahertz systems for diverse applications.

UV Photochromism in Transition Metal Oxides and Hybrid Materials.

Limited levels of UV exposure can be beneficial to the human body. However, the UV radiation present in the atmosphere can be damaging if levels of exposure exceed safe limits which depend on the individual the skin color. Hence, UV photochromic materials that respond to UV light by changing their color are powerful tools to sense radiation safety limits. Photochromic materials comprise either organic materials, inorganic transition metal oxides, or a hybrid combination of both. The photochromic behavior largely relies on charge transfer mechanisms and electronic band structures. These factors can be influenced by the structure and morphology, fabrication, composition, hybridization, and preparation of the photochromic materials, among others. Significant challenges are involved in realizing rapid photochromic change, which is repeatable, reversible with low fatigue, and behaving according to the desired application requirements. These challenges also relate to finding the right synergy between the photochromic materials used, the environment it is being used for, and the objectives that need to be achieved. In this review, the principles and applications of photochromic processes for transition metal oxides and hybrid materials, photocatalytic applications, and the outlook in the context of commercialized sensors in this field are presented.

Active Control of Nanodielectric-Induced THz Quasi-BIC in Flexible Metasurfaces: A Platform for Modulation and Sensing.

A bound state in the continuum (BIC) is a nonradiating state of light embedded in the continuum of propagating modes providing drastic enhancement of the electromagnetic field and its localization at micro-nanoscale. However, access to such modes in the far-field requires symmetry breaking. Here, it is demonstrated that a nanometric dielectric or semiconductor layer, 1000 times thinner than the resonant wavelength (λ/1000), induces a dynamically controllable quasi-bound state in the continuum (QBIC) with ultrahigh quality factor in a symmetric metallic metasurface at terahertz frequencies. Photoexcitation of nanostrips of germanium activates ultrafast switching of a QBIC resonance with 200% transmission intensity modulation and complete recovery within 7 ps on a low-loss flexible substrate. The nanostrips also form microchannels that provide an opportunity for BIC-based refractive index sensing. An optimization model is presented for (switchable) QBIC resonances of metamaterial arrays of planar symmetric resonators modified with any (active) dielectric for inverse metamaterial design that can serve as an enabling platform for active micro-nanophotonic devices.

Rapid and Selective Biomarker Detection with Conductometric Sensors.

The biomarker detection in human body fluids is crucial as biomarkers are important in diagnosing diseases. Conventional invasive techniques for biomarker detection are associated with infection, tissue damage, and discomfort. Non-invasive devices are an attractive alternative. Here, metal oxide (oxygen-deficient zinc oxide, ZnO) based conductometric sensors with two-terminal electrodes for rapid detection of biomarkers in real-time, are presented. This platform can be engineered for non-invasive, sensitive, and on-demand selective detection of biomarkers based on surface functionalization. The three novelties in this biosensing technique include an on-demand target selection device platform, short (<10 min) incubation times, and real-time monitoring of the biomarker of interest by electrical (resistance change) measurements. Cardiac inflammatory biomarkers interleukin 6 (IL-6) and C-reactive protein (CRP) are used as the model antigens. The devices can detect 100× lower concentration of IL-6 than healthy levels in human saliva and sweat and 1000× and ≈50× lower CRP concentrations than healthy levels in human saliva and sweat, respectively. The devices show high selectivity for IL-6 and CRP antigens when tested with a mixture of biomarkers. This sensor platform can be extended to selective measurements for viruses or DNA screening, which enables a new category of compact and rapid point-of-care medical devices.

Fully Light-Controlled Memory and Neuromorphic Computation in Layered Black Phosphorus.

Imprinting vision as memory is a core attribute of human cognitive learning. Fundamental to artificial intelligence systems are bioinspired neuromorphic vision components for the visible and invisible segments of the electromagnetic spectrum. Realization of a single imaging unit with a combination of in-built memory and signal processing capability is imperative to deploy efficient brain-like vision systems. However, the lack of a platform that can be fully controlled by light without the need to apply alternating polarity electric signals has hampered this technological advance. Here, a neuromorphic imaging element based on a fully light-modulated 2D semiconductor in a simple reconfigurable phototransistor structure is presented. This standalone device exhibits inherent characteristics that enable neuromorphic image pre-processing and recognition. Fundamentally, the unique photoresponse induced by oxidation-related defects in 2D black phosphorus (BP) is exploited to achieve visual memory, wavelength-selective multibit programming, and erasing functions, which allow in-pixel image pre-processing. Furthermore, all-optically driven neuromorphic computation is demonstrated by machine learning to classify numbers and recognize images with an accuracy of over 90%. The devices provide a promising approach toward neurorobotics, human-machine interaction technologies, and scalable bionic systems with visual data storage/buffering and processing.

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VO x.

Resistive switching crossbar architecture is highly desired in the field of digital memories due to low cost and high-density benefits. Different materials show variability in resistive switching properties due to the intrinsic nature of the material used, leading to discrepancies in the field because of underlying operation mechanisms. This highlights a need for a reliable technique to understand mechanisms using nanostructural observations. This protocol explains a detailed process and methodology of in situ nanostructural analysis as a result of electrical biasing using transmission electron microscopy (TEM). It provides visual and reliable evidence of underlying nanostructural changes in real time memory operations. Also included is the methodology of fabrication and electrical characterizations for asymmetric crossbar structures incorporating amorphous vanadium oxide. The protocol explained here for vanadium oxide films can be easily extended to any other materials in a metal-dielectric-metal sandwiched structure. Resistive switching crossbars are predicted to serve the programmable logic and neuromorphic circuits for next-generation memory devices, given the understanding of the operation mechanisms. This protocol reveals the switching mechanism in a reliable, timely, and cost-effective way in any type of resistive switching materials, and thereby predicts the device's applicability.

Coherently controllable terahertz plasmon-induced transparency using a coupled Fano-Lorentzian metasurface.

Metamaterials have been engineered to achieve electromagnetically induced transparency (EIT)-like behavior, analogous to those in quantum optical systems. These meta-devices are opening new paradigms in terahertz communication, ultra-sensitive sensing and EIT-like anti-reflection. The controlled coupling between a sub-radiant and a super-radiant particle in the unit cells of these metamaterial can enable multiple narrow plasmon induced transparency (PIT) windows over a broad band, with considerable group delay of electromagnetic field (slow light effect). Phase coherence between these PIT windows is highly desired for next-generation multichannel communication network. Herein, we numerically and experimentally validate a controllable frequency hopping mechanism between "slow light" windows in the terahertz (THz) regime. The effective media are composed of plasmonic "molecules" in which an asymmetric split-ring resonator (ASRR) or Fano resonator is displaced on the side of a cut-wire (Lorentz oscillator). Two metasurfaces where ASRR is on opposite side of the cut-wire are investigated. In these two cases, the proximity of the cut-wire to the gap on the ASRR having asymmetry is different. On one side, when the gap is nearer to the cut wire, displacing the ASRR along the cut-wire, produces only one narrow transparency window at 0.8 THz, corresponding to 20 ps group delay. When the ASRR is positioned on the opposite side, such that the gap is further, two transparency windows are observed when the ASRR is displaced along the cut-wire. That is, the transparency window hops from 0.8 THz to 1.2 THz. This corresponds to an increase from 20 to 30 ps in slow light effect. Numerical simulations suggest these single or multiple PIT windows occur if the couplings between the plasmonic modes in the different arrangements are either in-phase or out-of-phase, respectively.

Silicon-Nanotube-Mediated Intracellular Delivery Enables Ex Vivo Gene Editing.

Engineered nano-bio cellular interfaces driven by vertical nanostructured materials are set to spur transformative progress in modulating cellular processes and interrogations. In particular, the intracellular delivery-a core concept in fundamental and translational biomedical research-holds great promise for developing novel cell therapies based on gene modification. This study demonstrates the development of a mechanotransfection platform comprising vertically aligned silicon nanotube (VA-SiNT) arrays for ex vivo gene editing. The internal hollow structure of SiNTs allows effective loading of various biomolecule cargoes; and SiNTs mediate delivery of those cargoes into GPE86 mouse embryonic fibroblasts without compromising their viability. Focused ion beam scanning electron microscopy (FIB-SEM) and confocal microscopy results demonstrate localized membrane invaginations and accumulation of caveolin-1 at the cell-NT interface, suggesting the presence of endocytic pits. Small-molecule inhibition of endocytosis suggests that active endocytic process plays a role in the intracellular delivery of cargo from SiNTs. SiNT-mediated siRNA intracellular delivery shows the capacity to reduce expression levels of F-actin binding protein (Triobp) and alter the cellular morphology of GPE86. Finally, the successful delivery of Cas9 ribonucleoprotein (RNP) to specifically target mouse Hprt gene is achieved. This NT-enhanced molecular delivery platform has strong potential to support gene editing technologies.

Electrically Activated UV-A Filters Based on Electrochromic MoO3-x.

Chromism-based optical filters is a niche field of research, due to there being only a handful of electrochromic materials. Typically, electrochromic transition metal oxides such as MoO3 and WO3 are utilized in applications such as smart windows and electrochromic devices (ECD). Herein, we report MoO3-x-based electrically activated ultraviolet (UV) filters. The MoO3-x grown on indium tin oxide (ITO) substrate is mechanically assembled onto an electrically activated proton exchange membrane. Reversible H+ injection/extraction in MoO3-x is employed to switch the optical transmittance, enabling an electrically activated optical filter. The devices exhibit broadband transmission modulation (325-800 nm), with a peak of ∼60% in the UV-A range (350-392 nm). Comparable switching times of 8 s and a coloration efficiency of up to 116 cm2 C-1 are achieved.