RESUMEN
Crucial to the performance of devices based on organic molecules is an understanding of how the substrate-molecule interface influences both structural and electronic properties of the molecular layers. Within this context we studied the self-assembly of an alkoxy-triphenylene derived electron donor (HAT) in the monolayer regime on graphene/Ni(111). The molecules assembled into a close-packed hexagonal network commensurate with the graphene layer. Despite the commensurate structure, the HAT molecules only had a weak, physisorptive interaction with the substrate as pointed out by the photoelectron spectroscopy data. We discuss these findings in view of our recent reports for HAT adsorbed on Ag(111) and graphene/Ir(111). For all three substrates HAT adopts a similar close-packed hexagonal structure commensurate with the substrate while being physisorbed. The ionization potential is equal for all three substrates, supporting weak molecule-substrate interactions. These findings are remarkable, as commensurate overlayers usually only form at strongly interacting interfaces. We discuss potential reasons for this particular behavior of HAT which clearly sets itself apart from most studied molecule-substrate systems. In particular, these are the relatively weak but flexible intermolecular interactions, the molecular symmetry matching that of the substrate, and the comparatively weak but directional molecule-substrate interactions.
RESUMEN
Methods to control chiral-selectivity in molecular reactions through external inputs are of importance, both from a fundamental and technological point of view. Here, the self-assembly of prochiral 6,12-dibromochrysene monomers on Ag(110) is studied using scanning tunneling microscopy. Deposition of the monomers on a substrate held at room temperature leads to the formation of 1D achiral organometallic polymers. When the monomers are instead deposited on a substrate held at 373 K, homochiral organometallic polymers consisting of either the left- or right-handed enantiomer are formed. Post-deposition annealing of room temperature deposited samples at >373 K does not transform the achiral 1D organometallic polymers into homochiral ones and thus, does not yield the same final structure as if depositing onto a substrate held at the same elevated temperature. Furthermore, annealing promotes neither the formation of 1D covalently-coupled polymers nor the formation of graphene nanoribbons. Our results identify substrate temperature as an important factor in on-surface chiral synthesis, thereby demonstrating the importance of considering kinetic effects and the decisive role they can play in structure formation.
RESUMEN
We report the structural and electronic properties of narrow chevron-like graphene nanoribbons (GNRs), which depending on their length are either mirror or inversion symmetric. Additionally, GNRs of different length can form molecular heterojunctions based on an unusual binding motif.
RESUMEN
Host-guest architectures provide ideal systems for investigating site-specific physical and chemical effects. Condensation events in nanometer-sized confinements are particularly interesting for the investigation of intermolecular and molecule-surface interactions. They may be accompanied by conformational adjustments representing induced fit packing patterns. Here, we report that the symmetry of small clusters formed upon condensation, their registry with the substrate, their lateral packing, and their adsorption height are characteristically modified by the packing of cycloalkanes in confinements. While cyclopentane and cycloheptane display cooperativity upon filling of the hosting pores, cyclooctane and to a lesser degree cyclohexane diffusively redistribute to more favored adsorption sites. The dynamic behavior of cyclooctane is surprising at 5 K given the cycloalkane melting point of >0 °C. The site-specific modification of the interaction and behavior of adsorbates in confinements plays a crucial role in many applications of three-dimensional porous materials as gas storage agents or catalysts/biocatalysts.
RESUMEN
In this study, we report on the self-assembly of the organic electron donor 2,3,6,7,10,11-hexamethoxytriphenylene (HAT) on graphene grown epitaxially on Ir(111). Using scanning tunneling microscopy and low-energy electron diffraction, we find that a monolayer of HAT assembles in a commensurate close-packed hexagonal network on graphene/Ir(111). X-ray and ultraviolet photoelectron spectroscopy measurements indicate that no charge transfer between the HAT molecules and the graphene/Ir(111) substrate takes place, while the work function decreases slightly. This demonstrates that the HAT/graphene interface is weakly interacting. The fact that the molecules nonetheless form a commensurate network deviates from what is established for adsorption of organic molecules on metallic substrates where commensurate overlayers are mainly observed for strongly interacting systems.
RESUMEN
In recent studies, porphyrin derivatives have been frequently used as building blocks for the fabrication of metal-organic coordination networks (MOCNs) on metal surfaces under ultrahigh vacuum conditions (UHV). The porphyrin core can host a variety of 3d transition metals, which are usually incorporated in solution. However, the replacement of a pre-existing metal atom in the porphyrin core by a different metallic species has been rarely reported under UHV. Herein, we studied the influence of cyanophenyl and pyridyl functional endgroups in the self-assembly of structurally different porphyrin-based MOCNs by the deposition of Fe atoms on tetracyanophenyl (Co-TCNPP) and tetrapyridyl-functionalized (Zn-TPPyP) porphyrins on Au(111) by means of scanning tunneling microscopy (STM). A comparative analysis of the influence of the cyano and pyridyl endgroups on the formation of different in-plane coordination motifs is performed. Each porphyrin derivative formed two structurally different Fe-coordinated MOCNs stabilized by three- and fourfold in-plane coordination nodes, respectively. Interestingly, the codeposited Fe atoms did not only bind to the functional endgroups but also reacted with the porphyrin core of the Zn-substituted porphyrin (Zn-TPyP), i.e., an atom exchange reaction took place in the porphyrin core where the codeposited Fe atoms replaced the Zn atoms. This was evidenced by the appearance of molecules with an enhanced (centered) STM contrast compared with the appearance of Zn-TPyP, which suggested the formation of a new molecular species, i.e., Fe-TPPyP. Furthermore, the porphyrin core of the Co-substituted porphyrin (Co-TCNPP) displayed an off-centered STM contrast after the deposition of Fe atoms, which was attributed to the binding of the Fe atoms on the top site of the Co-substituted porphyrin core. In summary, the deposition of metal atoms onto organic layers can steer the formation of structurally different MOCNs and may replace pre-existing metal atoms contained in the porphyrin core.
RESUMEN
Scanning probe microscopy has become an essential tool to not only study pristine surfaces but also on-surface reactions and molecular self-assembly. Nonetheless, due to inherent limitations, some atoms or (parts of) molecules are either not imaged or cannot be unambiguously identified. Herein, we discuss the arrangement of two different nonplanar molecular assemblies of para-hexaphenyl-dicarbonitrile (Ph6(CN)2) on Au(111) based on a combined theoretical and experimental approach. For deposition of Ph6(CN)2 on Au(111) kept at room temperature, a rhombic nanoporous network stabilized by a combination of hydrogen bonding and antiparallel dipolar coupling is formed. Annealing at 575 K resulted in an irreversible thermal transformation into a hexagonal nanoporous network stabilized by native gold adatoms. However, the Au adatoms could neither be unequivocally identified by scanning tunneling microscopy nor by noncontact atomic force microscopy. By combining van't Hoff plots derived from our scanning probe images with our density functional theory calculations, we were able to confirm the presence of the elusive Au adatoms in the hexagonal molecular network.
RESUMEN
The self-assembly of a nickel-porphyrin derivative (Ni-DPPyP) containing two pyridyl coordinating sites and two pentyl chains at trans meso positions was studied with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED) on Au(111). Deposition of Ni-DPPyP onto Au(111) gave rise to a close-packed network for coverages smaller or equal to one monolayer as revealed by STM and LEED. The molecular arrangement of this two-dimensional network is stabilized via hydrogen bonds formed between the pyridyl's nitrogen and hydrogen atoms from the pyrrole groups of neighboring molecules. Subsequent deposition of cobalt atoms onto the close-packed network and post-deposition annealing at 423â K led to the formation of a Co-coordinated hexagonal porous network. As confirmed by XPS measurements, the porous network is stabilized by metal-ligand interactions between one cobalt atom and three pyridyl ligands, each pyridyl ligand coming from a different Ni-DPPyP molecule.
RESUMEN
Graphene nanoribbons hold great promise for future applications in nanoelectronic devices, as they may combine the excellent electronic properties of graphene with the opening of an electronic band gap - not present in graphene but required for transistor applications. With a two-step on-surface synthesis process, graphene nanoribbons can be fabricated with atomic precision, allowing precise control over width and edge structure. Meanwhile, a decade of research has resulted in a plethora of graphene nanoribbons having various structural and electronic properties. This article reviews not only the on-surface synthesis of atomically precise graphene nanoribbons but also how their electronic properties are ultimately linked to their structure. Current knowledge and considerations with respect to precursor design, which eventually determines the final (electronic) structure, are summarized. Special attention is dedicated to the electronic properties of graphene nanoribbons, also in dependence on their width and edge structure. It is exactly this possibility of precisely changing their properties by fine-tuning the precursor design - offering tunability over a wide range - which has generated this vast research interest, also in view of future applications. Thus, selected device prototypes are presented as well.
RESUMEN
The development of new strategies for the preparation of multicomponent supramolecular assemblies is a major challenge on the road to complex functional molecular systems. Here we present the use of a non-porous self-assembled monolayer from uC33 -NDI-uC33 , a naphthalenediimide symmetrically functionalized with unsaturated 33â carbon-atom-chains, to prepare bicomponent supramolecular surface systems with a series of alkoxy-pyrene (PyrOR) derivatives at the liquid/HOPG interface. While previous attempts at directly depositing many of these PyrOR units at the liquid/HOPG interface failed, the multicomponent approach through the uC33 -NDI-uC33 template enabled control over molecular interactions and facilitated adsorption. The PyrOR deposition restructured the initial uC33 -NDI-uC33 monolayer, causing an expansion in two dimensions to accommodate the guests. As far as we know, this represents the first example of a non-porous or non-metal complex-bearing monolayer that allows the stepwise formation of multicomponent supramolecular architectures on surfaces.
RESUMEN
Self-assembled monolayers (SAMs) are widely used to engineer the surface properties of metals. The relatively simple and versatile chemistry of metal-thiolate bonds makes thiolate SAMs the preferred option in a range of applications, yet fragility and a tendency to oxidize in air limit their long-term use. Here, we report the formation of thiol-free self-assembled mono- and bilayers of glycol ethers, which bind to the surface of coinage metals through the spontaneous chemisorption of glycol ether-functionalized fullerenes. As-prepared assemblies are bilayers presenting fullerene cages at both the substrate and ambient interface. Subsequent exposure to functionalized glycol ethers displaces the topmost layer of glycol ether-functionalized fullerenes, and the resulting assemblies expose functional groups to the ambient interface. These layers exhibit the key properties of thiolate SAMs, yet they are stable to ambient conditions for several weeks, as shown by the performance of tunnelling junctions formed from SAMs of alkyl-functionalized glycol ethers. Glycol ether-functionalized spiropyrans incorporated into mixed monolayers lead to reversible, light-driven conductance switching. Self-assemblies of glycol ethers are drop-in replacements for thiolate SAMs that retain all of their useful properties while avoiding the drawbacks of metal-thiolate bonds.
RESUMEN
Achieving long-range order with surface-supported supramolecular assemblies is one of the pressing challenges in the prospering field of non-covalent surface functionalization. Having access to defect-free on-surface molecular assemblies will pave the way for various nanotechnology applications. Here we report the synthesis of two libraries of naphthalenediimides (NDIs) symmetrically functionalized with long aliphatic chains (C28 and C33) and their self-assembly at the 1-phenyloctane/highly oriented pyrolytic graphite (1-PO/HOPG) interface. The two NDI libraries differ by the presence/absence of an internal double bond in each aliphatic chain (unsaturated and saturated compounds, respectively). All molecules assemble into lamellar arrangements, with the NDI cores lying flat and forming 1D rows on the surface, while the carbon chains separate the 1D rows from each other. Importantly, the presence of the unsaturation plays a dominant role in the arrangement of the aliphatic chains, as it exclusively favors interdigitation. The fully saturated tails, instead, self-assemble into a combination of either interdigitated or non-interdigitated diagonal arrangements. This difference in packing is spectacularly amplified at the whole surface level and results in almost defect-free self-assembled monolayers for the unsaturated compounds. In contrast, the monolayers of the saturated counterparts are globally disordered, even though they locally preserve the lamellar arrangements. The experimental observations are supported by computational studies and are rationalized in terms of stronger van der Waals interactions in the case of the unsaturated compounds. Our investigation reveals the paramount role played by internal double bonds on the self-assembly of discrete large molecules at the liquid/solid interface.
RESUMEN
Quantum dot arrays in the form of molecular nanoporous networks are renowned for modifying the electronic surface properties through quantum confinement. Here we show that, compared to the pristine surface state, the band bottom of the confined states can exhibit downward shifts accompanied by a lowering of the effective masses simultaneous to the appearance of tiny gaps at the Brillouin zone boundaries. We observed these effects by angle resolved photoemission for two self-assembled homothetic (scalable) Co-coordinated metal-organic networks. Complementary scanning tunneling spectroscopy measurements confirmed these findings. Electron plane wave expansion simulations and density functional theory calculations provide insight into the nature of this phenomenon, which we assign to metal-organic overlayer-substrate interactions in the form of adatom-substrate hybridization. To date, the absence of the experimental band structure resulting from single metal adatom coordinated nanoporous networks has precluded the observation of the significant surface state renormalization reported here, which we infer to be general for low interacting and well-defined adatom arrays.
RESUMEN
By design, coupled mechanical oscillators offer a playground for the study of crystalline topology and related properties. Particularly, non-centrosymmetric, supramolecular nanocrystals feature a complex phonon spectrum where edge modes may evolve. Here we show, employing classical atomistic calculations, that the edges of a chiral supramolecular nanoribbon can host defined edge phonon states. We suggest that the topology of several edge modes in the phonon spectrum is nontrivial and thermally insulated from bulk states. By means of molecular dynamics, we excite a supramolecular bond to launch a directional excitation along the edge without considerable bulk or back-propagation. Our results suggest that supramolecular monolayers can be employed to engineer phonon states that are robust against backscattering, toward supramolecular thermal waveguides, diodes, and logics.
RESUMEN
The self-assembly process of a cobalt-porphyrin derivative (Co-TCNPP) containing cyanophenyl substituents at all four meso positions on Au(111) was studied by means of scanning tunneling microscopy (STM) and low energy electron diffraction (LEED) under ultrahigh vacuum conditions. Deposition of Co-TCNPP onto Au(111) gave rise to the formation of a close-packed H-bonded network, which was independent of coverage as revealed by STM and LEED. However, a coverage-dependent structural transformation took place upon the deposition of Co atoms. At monolayer coverage, a reticulated long-range ordered network exhibiting a distinct fourfold Co coordination was observed. By reduction of the molecular coverage, a second metal-organic coordination network (MOCN) was formed in coexistence with the fourfold Co-coordinated network, that is, a chevron structure stabilized by a simultaneous expression of H-bonding and threefold Co coordination. We attribute the coverage-dependent structural transformation to the in-plane compression pressure exerted by the molecules deposited on the surface. Our study shows that a subtle interplay between the chemical nature of the building blocks (molecules and metallic atoms) and molecular coverage can steer the formation of structurally different porphyrin-based MOCNs.
RESUMEN
Over the past years, ultrathin films consisting of electron donating and accepting molecules have attracted increasing attention due to their potential usage in optoelectronic devices. Key parameters for understanding and tuning their performance are intermolecular and molecule-substrate interactions. Here, the formation of a monolayer thick blend of triphenylene-based organic donor and acceptor molecules from 2,3,6,7,10,11-hexamethoxytriphenylene (HAT) and 1,4,5,8,9,12-hexaazatriphenylenehexacarbonitrile (HATCN), respectively, on a silver (111) surface is reported. Scanning tunneling microscopy and spectroscopy, valence and core level photoelectron spectroscopy, as well as low-energy electron diffraction measurements are used, complemented by density functional theory calculations, to investigate both the electronic and structural properties of the homomolecular as well as the intermixed layers. The donor molecules are weakly interacting with the Ag(111) surface, while the acceptor molecules show a strong interaction with the substrate leading to charge transfer and substantial buckling of the top silver layer and of the adsorbates. Upon mixing acceptor and donor molecules, strong hybridization occurs between the two different molecules leading to the emergence of a common unoccupied molecular orbital located at both the donor and acceptor molecules. The donor acceptor blend studied here is, therefore, a compelling candidate for organic electronics based on self-assembled charge-transfer complexes.
RESUMEN
We report the formation of one- and two-dimensional metal-organic coordination structures from para-hexaphenyl-dicarbonitrile (NC-Ph6-CN) molecules and Cu atoms on graphene epitaxially grown on Ir(111). By varying the stoichiometry between the NC-Ph6-CN molecules and Cu atoms, the dimensionality of the metal-organic coordination structures could be tuned: for a 3:2 ratio, a two-dimensional hexagonal porous network based on threefold Cu coordination was observed, while for a 1:1 ratio, one-dimensional chains based on twofold Cu coordination were formed. The formation of metal-ligand bonds was supported by imaging the Cu atoms within the metal-organic coordination structures with scanning tunneling microscopy. Scanning tunneling spectroscopy measurements demonstrated that the electronic properties of NC-Ph6-CN molecules and Cu atoms were different between the two-dimensional porous network and one-dimensional molecular chains.
RESUMEN
We report on the self-assembly of a conformational flexible organic compound on Au(111) using scanning tunneling microscopy and low-energy electron diffraction measurements. We observed different conformers of the compound upon adsorption on the reconstructed Au(111) surface. Increasing the molecular coverage enhanced the lateral pressure, that is, parallel to the surface, favoring a coverage-controlled transition from a supramolecular network displaying only one molecular organization, into a polymorphic array with two coexisting arrangements. Our results give insights into the role of substrate-induced conformational changes on the formation of polymorphic supramolecular networks.
RESUMEN
A comparative study on the self-assembly of sexiphenyl-dicarbonitrile on highly oriented pyrolytic graphite and single-layer graphene on Cu(111) is presented. Despite an overall low molecule-substrate interaction, the close-packed structures exhibit a peculiar shift repeating every four to five molecules. This shift has hitherto not been reported for similar systems and is hence a unique feature induced by the graphitic substrates.