Infrared phase-change chiral metasurfaces with tunable circular dichroism.

Integrating phase-change materials in metasurfaces has emerged as a powerful strategy to realize optical devices with tunable electromagnetic responses. Here, phase-change chiral metasurfaces based on GST-225 material with the designed trapezoid-shaped resonators are demonstrated to achieve tunable circular dichroism (CD) responses in the infrared regime. The asymmetric trapezoid-shaped resonators are designed to support two chiral plasmonic resonances with opposite CD responses for realizing switchable CD between negative and positive values using the GST phase change from amorphous to crystalline. The electromagnetic field distributions of the chiral plasmonic resonant modes are analyzed to understand the chiroptical responses of the metasurface. Furthermore, the variations in the absorption spectrum and CD value for the metasurface as a function of the baking time during the GST phase transition are analyzed to reveal the underlying thermal tuning process of the metasurface. The demonstrated phase-change metasurfaces with tunable CD responses hold significant promise in enabling many applications in the infrared regime such as chiral sensing, encrypted communication, and thermal imaging.

Redox Gating for Colossal Carrier Modulation and Unique Phase Control.

Redox gating, a novel approach distinct from conventional electrolyte gating, combines reversible redox functionalities with common ionic electrolyte moieties to engineer charge transport, enabling power-efficient electronic phase control. This study achieves a colossal sheet carrier density modulation beyond 1016 cm-2, sustainable over thousands of cycles, all within the sub-volt regime for functional oxide thin films. The key advantage of this method lies in the controlled injection of a large quantity of carriers from the electrolyte into the channel material without the deleterious effects associated with traditional electrolyte gating processes such as the production of ionic defects or intercalated species. The redox gating approach offers a simple and practical means of decoupling electrical and structural phase transitions, enabling the isostructural metal-insulator transition and improved device endurance. The versatility of redox gating extends across multiple materials, irrespective of their crystallinity, crystallographic orientation, or carrier type (n- or p-type). This inclusivity encompasses functional heterostructures and low-dimensional quantum materials composed of sustainable elements, highlighting the broad applicability and potential of the technique in electronic devices.

Wavelength-tunable infrared chiral metasurfaces with phase-change materials.

Optical phase-change materials exhibit tunable permittivity and switching properties during phase transition, which offers the possibility of dynamic control of optical devices. Here, a wavelength-tunable infrared chiral metasurface integrated with phase-change material GST-225 is demonstrated with the designed unit cell of parallelogram-shaped resonator. By varying the baking time at a temperature above the phase transition temperature of GST-225, the resonance wavelength of the chiral metasurface is tuned in the wavelength range of 2.33 µm to 2.58 µm, while the circular dichroism in absorption is maintained around 0.44. The chiroptical response of the designed metasurface is revealed by analyzing the electromagnetic field and displacement current distributions under left- and right-handed circularly polarized (LCP and RCP) light illumination. Moreover, the photothermal effect is simulated to investigate the large temperature difference in the chiral metasurface under LCP and RCP illumination, which allows for the possibility of circular polarization-controlled phase transition. The presented chiral metasurfaces with phase-change materials offer the potential to facilitate promising applications in the infrared regime, such as chiral thermal switching, infrared imaging, and tunable chiral photonics.

Operando study of mechanical integrity of high-volume expansion Li-ion battery anode materials coated by Al2O3.

Group IV elements and their oxides, such as Si, Ge, Sn and SiO have much higher theoretical capacity than commercial graphite anode. However, these materials undergo large volume change during cycling, resulting in severe structural degradation and capacity fading. Al2O3coating is considered an approach to improve the mechanical stability of high-capacity anode materials. To understand the effect of Al2O3coating directly, we monitored the morphology change of coated/uncoated Sn particles during cycling using operando focused ion beam-scanning electron microscopy. The results indicate that the Al2O3coating provides local protection and reduces crack formation at the early stage of volume expansion. The 3 nm Al2O3coating layer provides better protection than the 10 and 30 nm coating layer. Nevertheless, the Al2O3coating is unable to prevent the pulverization at the later stage of cycling because of large volume expansion.

Digital Twin and web services for robotic deburring in intelligent manufacturing.

The development of modern manufacturing requires key solutions to enhance the intelligence of manufacturing such as digitalization, real-time monitoring, or simulation techniques. For smart robotic manufacturing, the modern approach regarding robot programming and process planning aims for both high efficiency and energy-awareness. During the design and manufacturing stages, optimization becomes crucial and can be fulfilled by means of appropriate digital manufacturing tools. This paper presents the development of a Digital Twin for a robotic deburring workcell along with the process planning and robot programming. Considering a large size workpiece, a new robot programming solution was implemented, based on image processing to safely re-machine only areas where burrs could not be completely removed in the main deburring routine. The work also covers the development of a new web platform to remotely monitor the robotic workcell, to trigger alerts for unexpected events and to allow the control to authorized personnel enabled by the employment of robot web services following an architectural RESTful style which establishes a communication link to the robot virtual controller. The aim of this research is to integrate the Digital Twin with the innovative proposals of Industry 4.0, offering a project-based model of smart robotic manufacturing and experience concepts such as Cyber-Physical System, digitalization, data acquisition, continuous monitoring, and intelligent solutions in a novel approach. Furthermore, the work covers energy consumption strategies for energy-aware robotic manufacturing. Finally, the results of an energy-efficient motion planning along with signal-based scheduling optimization of the robotic deburring cell are discussed.

Controlled Formation of Conduction Channels in Memristive Devices Observed by X-ray Multimodal Imaging.

Neuromorphic computing provides a means for achieving faster and more energy efficient computations than conventional digital computers for artificial intelligence (AI). However, its current accuracy is generally less than the dominant software-based AI. The key to improving accuracy is to reduce the intrinsic randomness of memristive devices, emulating synapses in the brain for neuromorphic computing. Here using a planar device as a model system, the controlled formation of conduction channels is achieved with high oxygen vacancy concentrations through the design of sharp protrusions in the electrode gap, as observed by X-ray multimodal imaging of both oxygen stoichiometry and crystallinity. Classical molecular dynamics simulations confirm that the controlled formation of conduction channels arises from confinement of the electric field, yielding a reproducible spatial distribution of oxygen vacancies across switching cycles. This work demonstrates an effective route to control the otherwise random electroforming process by electrode design, facilitating the development of more accurate memristive devices for neuromorphic computing.

High-Throughput Microfluidics Platform for Intracellular Delivery and Sampling of Biomolecules from Live Cells.

Nondestructive cell membrane permeabilization systems enable the intracellular delivery of exogenous biomolecules for cell engineering tasks as well as the temporal sampling of cytosolic contents from live cells for the analysis of dynamic processes. Here, we report a microwell array format live-cell analysis device (LCAD) that can perform localized-electroporation induced membrane permeabilization, for cellular delivery or sampling, and directly interfaces with surface-based biosensors for analyzing the extracted contents. We demonstrate the capabilities of the LCAD via an automated high-throughput workflow for multimodal analysis of live-cell dynamics, consisting of quantitative measurements of enzyme activity using self-assembled monolayers for MALDI mass spectrometry (SAMDI) and deep-learning enhanced imaging and analysis. By combining a fabrication protocol that enables robust assembly and operation of multilayer devices with embedded gold electrodes and an automated imaging workflow, we successfully deliver functional molecules (plasmid and siRNA) into live cells at multiple time-points and track their effect on gene expression and cell morphology temporally. Furthermore, we report sampling performance enhancements, achieving saturation levels of protein tyrosine phosphatase activity measured from as few as 60 cells, and demonstrate control over the amount of sampled contents by optimization of electroporation parameters using a lumped model. Lastly, we investigate the implications of cell morphology on electroporation-induced sampling of fluorescent molecules using a deep-learning enhanced image analysis workflow.

Electrolyte/Dye/TiO2 Interfacial Structures of Dye-Sensitized Solar Cells Revealed by In Situ Neutron Reflectometry with Contrast Matching.

The nature of an interfacial structure buried within a device assembly is often critical to its function. For example, the dye/TiO2 interfacial structure that comprises the working electrode of a dye-sensitized solar cell (DSC) governs its photovoltaic output. These structures have been determined outside of the DSC device, using ex situ characterization methods; yet, they really should be probed while held within a DSC since they are modulated by the device environment. Dye/TiO2 structures will be particularly influenced by a layer of electrolyte ions that lies above the dye self-assembly. We show that electrolyte/dye/TiO2 interfacial structures can be resolved using in situ neutron reflectometry with contrast matching. We find that electrolyte constituents ingress into the self-assembled monolayer of dye molecules that anchor onto TiO2. Some dye/TiO2 anchoring configurations are modulated by the formation of electrolyte/dye intermolecular interactions. These electrolyte-influencing structural changes will affect dye-regeneration and electron-injection DSC operational processes. This underpins the importance of this in situ structural determination of electrolyte/dye/TiO2 interfaces within representative DSC device environments.

The Effect of Periodic Spatial Perturbations on the Emission Rates of Quantum Dots near Graphene Platforms.

The quenching of fluorescence (FL) at the vicinity of conductive surfaces and, in particular, near a 2-D graphene layer has become an important biochemical sensing tool. The quenching is attributed to fast non-radiative energy transfer between a chromophore (here, a Quantum Dot, QD) and the lossy graphene layer. Increased emission rate is also observed when the QD is coupled to a resonator. Here, we combine the two effects in order to control the emission lifetime of the QD. In our case, the resonator was defined by an array of nano-holes in the oxide substrate underneath a graphene surface guide. At resonance, the surface mode of the emitted radiation is concentrated at the nano-holes. Thus, the radiation of QD at or near the holes is spatially correlated through the hole-array's symmetry. We demonstrated an emission rate change by more than 50% as the sample was azimuthally rotated with respect to the polarization of the excitation laser. In addition to an electrical control, such control over the emission lifetime could be used to control Resonance Energy Transfer (RET) between two chromophores.

Approaching the Strain-Free Limit in Ultrathin Nanomechanical Resonators.

Ultrathin mechanical structures are ideal building platforms to pursue the ultimate limit of nanomechanical resonators for applications in sensing, signal processing, and quantum physics. Unfortunately, as the thickness of the vibrating structures is reduced, the built-in strain of the structural materials plays an increased role in determining the mechanical performance of the devices. As a consequence, it is very challenging to fabricate resonators working in the modulus-dominant regime, where their dynamic behavior is exclusively determined by the device geometry. In this Letter, we report ultrathin doubly clamped nanomechanical resonators with aspect ratios as large as L/t ∼5000 and working in the modulus-dominant regime. We observed room temperature thermomechanically induced motion of multiple vibration modes with resonant frequencies closely matching the predicted values of Euler-Bernoulli beam theory under an axial strain of 6.3 × 10-8. The low strain of the devices enables a record frequency tuning ratio of more than 50 times. These results illustrate a new strategy for the quantitative design of nanomechanical resonators with unprecedented performance.

Ferroelectric Domain Wall Motion in Freestanding Single-Crystal Complex Oxide Thin Film.

Ferroelectric domain walls in single-crystal complex oxide thin films are found to be orders of magnitude slower when the interfacial bonds with the heteroepitaxial substrate are broken to create a freestanding film. This drastic change in domain wall kinetics does not originate from the alteration of epitaxial strain; rather, it is correlated with the structural ripples at mesoscopic length scale and associated flexoelectric effects induced in the freestanding films. In contrast, the effects of the bond-breaking on the local static ferroelectric properties of both top and bottom layers of the freestanding films, such as domain wall width and spontaneous polarization, are modest and governed by the change in epitaxy-induced compressive strain.

Optimized oxygen deprived low temperature sputtered WO3 thin films for crystalline structures.

We report a detailed analysis on the effects of processing parameters for sputtered tungsten trioxide (WO3) thin nanoscale films on their structural, vibrational and electrical properties. The research aims to understand the fundamental aspects of WO3 sputtering at relatively low temperatures and in an oxygen deprived environment targeting applications of temperature and oxygen sensitive substrates. Structural analysis indicates that films deposited at room temperature, or substrate temperatures at or below 400 °C with low oxygen partial pressure are amorphous. Crystallization of the films was observed with distinct Raman peaks when the films were annealed at 300 °C or above using rapid thermal annealing for 10 min. Films revealed monoclinic phases of WO3 with the presence of W-O-W stretching, bending and lattice vibrational modes in the Raman spectra. Interestingly, a change of transport behavior from insulating to semiconducting was observed for as deposited films on post annealing. Annealed films revealed stoichiometric WO3 phases with no external defects detected. The present study adopts a route to intercalate WO3 in a variety of applications from electrochromic coloration to a nanocrystalline thin film for electronic devices sensitive to higher temperatures and gas flow in the sputtering system.

Broadband infrared binary-pattern metasurface absorbers with micro-genetic algorithm optimization.

Broadband binary-pattern metasurface absorbers are designed and demonstrated in the mid-infrared wavelength range through the micro-genetic algorithm. The tungsten-based metasurface absorbers with the optimized binary-pattern nanostructures exhibit broadband near-perfect absorption due to the multiple plasmonic resonances supported within the unit cell. Furthermore, the influence of minor pixel modifications in the optimized binary-pattern nanostructures on the absorption performance is investigated in the experiment. This Letter presents a promising approach to design and optimize complex optical nanostructures with the desired properties for metamaterial and metasurface applications.

Dynamic Field Modulation of the Octahedral Framework in Metal Oxide Heterostructures.

Control over the oxygen octahedral framework is widely recognized as key to the design of functional properties in perovskite oxide heterostructures. Although the oxygen octahedral framework can be manipulated during synthesis, the as-grown oxygen octahedra generally remain fixed, preventing the development of adaptive behavior in electronic and ionotronic systems. Here, it is demonstrated that the oxygen octahedral framework can be dynamically and reversibly manipulated by an electric field through the coupling with oxygen vacancies. Studying model WO3 heterostructures during ionic liquid gating with a combination of in situ X-ray scattering and spectroscopy, it is shown that large changes in electronic properties can arise due to the increased flexibility of the octahedral network at high vacancy concentrations. The results describe a generic framework for the construction of dynamic systems and devices with an array of field-tunable properties.

Quantitative Observation of Threshold Defect Behavior in Memristive Devices with Operando X-ray Microscopy.

Memristive devices are an emerging technology that enables both rich interdisciplinary science and novel device functionalities, such as nonvolatile memories and nanoionics-based synaptic electronics. Recent work has shown that the reproducibility and variability of the devices depend sensitively on the defect structures created during electroforming as well as their continued evolution under dynamic electric fields. However, a fundamental principle guiding the material design of defect structures is still lacking due to the difficulty in understanding dynamic defect behavior under different resistance states. Here, we unravel the existence of threshold behavior by studying model, single-crystal devices: resistive switching requires that the pristine oxygen vacancy concentration reside near a critical value. Theoretical calculations show that the threshold oxygen vacancy concentration lies at the boundary for both electronic and atomic phase transitions. Through operando, multimodal X-ray imaging, we show that field tuning of the local oxygen vacancy concentration below or above the threshold value is responsible for switching between different electrical states. These results provide a general strategy for designing functional defect structures around threshold concentrations to create dynamic, field-controlled phases for memristive devices.

Silicon compatible Sn-based resistive switching memory.

Large banks of cheap, fast, non-volatile, energy efficient, scalable solid-state memories are an increasingly essential component for today's data intensive computing. Conductive-bridge random access memory (CBRAM) - which involves voltage driven formation and dissolution of Cu or Ag filaments in a Cu (or Ag) anode/dielectric (HfO2 or Al2O3)/inert cathode device - possesses the necessary attributes to fit the requirements. Cu and Ag are, however, fast diffusers and known contaminants in silicon microelectronics. Herein, employing a criterion for electrode metal selection applicable to cationic filamentary devices and using first principles calculations for estimating diffusion barriers in HfO2, we identify tin (Sn) as a rational, silicon CMOS compatible replacement for Cu and Ag anodes in CBRAM devices. We then experimentally fabricate Sn based CBRAM devices and demonstrate very fast, steep-slope memory switching as well as threshold switching, comparable to Cu or Ag based devices. Furthermore, time evolution of the cationic filament formation along with the switching mechanism is discussed based on time domain measurements (I vs. t) carried out under constant voltage stress. The time to threshold is shown to be a function of both the voltage stress (Vstress) as well as the initial leakage current (I0) through the device.

Reconfigurable Vanadium Dioxide Nanomembranes and Microtubes with Controllable Phase Transition Temperatures.

Two additional structural forms, free-standing nanomembranes and microtubes, are reported and added to the vanadium dioxide (VO2) material family. Free-standing VO2 nanomembranes were fabricated by precisely thinning as-grown VO2 thin films and etching away the sacrificial layer underneath. VO2 microtubes with a range of controllable diameters were rolled-up from the VO2 nanomembranes. When a VO2 nanomembrane is rolled-up into a microtubular structure, a significant compressive strain is generated and accommodated therein, which decreases the phase transition temperature of the VO2 material. The magnitude of the compressive strain is determined by the curvature of the VO2 microtube, which can be rationally and accurately designed by controlling the tube diameter during the rolling-up fabrication process. The VO2 microtube rolling-up process presents a novel way to controllably tune the phase transition temperature of VO2 materials over a wide range toward practical applications. Furthermore, the rolling-up process is reversible. A VO2 microtube can be transformed back into a nanomembrane by introducing an external strain. Because of its tunable phase transition temperature and reversible shape transformation, the VO2 nanomembrane-microtube structure is promising for device applications. As an example application, a tubular microactuator device with low driving energy but large displacement is demonstrated at various triggering temperatures.

Wavelength-selective mid-infrared metamaterial absorbers with multiple tungsten cross resonators.

Wavelength-selective metamaterial absorbers in the mid-infrared range are demonstrated by using multiple tungsten cross resonators. By adjusting the geometrical parameters of cross resonators in single-sized unit cells, near-perfect absorption with single absorption peak tunable from 3.5 µm to 5.5 µm is realized. The combination of two, three, or four cross resonators of different sizes in one unit cell enables broadband near-perfect absorption at mid-infrared range. The obtained absorption spectra exhibit omnidirectionality and weak dependence on incident polarization. The underlying mechanism of near-perfect absorption with cross resonators is further explained by the optical mode analysis, dispersion relation and equivalent RLC circuit model. Moreover, thermal analysis is performed to study the heat generation and temperature increase in the cross resonator absorbers, while the energy conversion efficiency is calculated for the thermophotovoltaic system made of the cross resonator thermal emitters and low-bandgap semiconductors.

Single-Crystalline SrRuO3 Nanomembranes: A Platform for Flexible Oxide Electronics.

The field of oxide electronics has benefited from the wide spectrum of functionalities available to the ABO3 perovskites, and researchers are now employing defect engineering in single crystalline heterostructures to tailor properties. However, bulk oxide single crystals are not conducive to many types of applications, particularly those requiring mechanical flexibility. Here, we demonstrate the realization of an all-oxide, single-crystalline nanomembrane heterostructure. With a surface-to-volume ratio of 2 × 10(7), the nanomembranes are fully flexible and can be readily transferred to other materials for handling purposes or for new materials integration schemes. Using in situ synchrotron X-ray scattering, we find that the nanomembranes can bond to other host substrates near room temperature and demonstrate coupling between surface reactivity and electromechanical properties in ferroelectric nanomembrane systems. The synthesis technique described here represents a significant advancement in materials integration and provides a new platform for the development of flexible oxide electronics.