Bio-enriched composite materials derived from waste cooking oil for selective reduction of odour intensity.

Currently, pathogenic microorganisms are becoming more active in public utility areas like parking lots and waste shelters due to the accumulation of organic waste. This uncontrolled waste leads to decay, altering its composition and presenting a microbiological risk to public health. Additionally, it emits unpleasant odors containing chemicals that irritate the mucous membranes, causing discomfort in the nose, throat, and eyes by stimulating the trigeminal nerve. These odors can have various negative effects on both quality of life and public health. The study investigated the physicochemical properties of oil composites enriched with natural additives and determined their effectiveness in reducing the intensity of nuisance odours. The research showed over 82% reduction in decaying meat odour and almost 65% reduction in ammonia odour. A higher impact of the given composites on reducing the odour from decaying meat than from ammonia was observed. This may be due to the biocidal properties of the additives used (turmeric, thymol, salicylic acid, hops and curly sorrel) and the higher intensity of ammonia odor compared to meat-derived odour. Despite the non-porous nature of the solids tested (with similar specific surface areas ranging from 0.66 to 0.88 m2/g), they were capable of sorbing NH3.

Antimicrobial properties of WCO-based composites enriched with hops and curly sorrel for green building solutions.

Modern production of vegetable oils has reached impressive levels, and the ever-growing quantities of waste cooking oil (WCO) provide a local source of raw materials for innovative materials. The WCO composite production process involves a series of reactions, including polymerisation, esterification, and transesterification, which lead to the hardening of composite materials. In light of the growing problem of bacterial and fungal diseases, materials with high strength properties and biocidal properties are being sought. Fungal infections of the skin are a widespread problem, and the number of cases is steadily increasing. This article presents a study of the antibacterial potential of WCO-based composites enriched with hops or sorrel root in the context of their application in the construction industry. The compressive and flexural strength of the oil composites, their absorbability and hydrophobicity, and their effects on Gram-positive (S. aureus and S. epidermidis) and Gram-negative (E. coli and P. aeruginosa) bacteria and fungi (A. niger, P. anomala) were investigated. Maximum split tensile strength (4.3 MPa) and flexural strength (5.1 MPa) were recorded for oil-hop composites. Oil composites enriched with curly sorrel and hops showed antibacterial activity against S. aureus at 27% and 25%. High biocidal activity (up to 70%) was recorded against E. coli and against S. epidermidis (up to 99%) due to the action of composites with curly sorrel. The antifungal activities of composites with hops was 15% and 19% for P. anomala and A. niger, respectively, while with curly sorrel they were 42% and 30%.

Upcycling Waste Streams from a Biorefinery Process-A Case Study on Cadmium and Lead Biosorption by Two Types of Biopolymer Post-Extraction Biomass.

This study investigated the possibility of using the spent kind of biomass of Pseudomonas putida CA-3 and Zobelella denitrificans MW1 obtained after the pilot-scale production of polyhydroxyalkanoates (PHAs) as a biosorbent for the bioremediation of aqueous solutions containing toxic cadmium and lead ions. The material was characterized by means of scanning electron microscopy, Fourier-transformed infrared spectroscopy, nuclear magnetic resonance spectroscopy and amino acid profiling. To check the sorption capacity of spent biomass against Pb and Cd ions, equilibrium studies were performed. To learn about the nature of the sorption process, kinetic modelling was carried out and the obtained results showed that the adsorption process is best described by the pseudo-second-order kinetic model (PSO), which suggests that the sorption process is connected with the chemical bonding of the ions on the sorbent surface. Information provided by the amino acid profile made it possible to predict the adsorption mechanism and FTIR analysis proved the participation of different chemical groups in the removal process. According to the equilibrium studies, the best-fitted isotherm was the Freundlich model for all used materials and metal ions considering the correlation coefficient. Summarizing the results, the spent biomass after the PHA production is an effective biosorbent and can be reused for heavy metal bioremediation.

Raphia-Microorganism Composite Biosorbent for Lead Ion Removal from Aqueous Solutions.

This study investigated the possibility of obtaining a raphia-microorganism composite for removing lead ions from aqueous solutions using immobilized yeast cells Saccharomyces cerevisiae on Raphia farinifera fibers. The obtained biocomposite was characterized using scanning electron microscopy and Fourier transform infrared spectroscopy. Studies were conducted to determine the influence of contact time, initial concentration of Pb(II), and pH allowed for the selection of nonlinear equilibrium and kinetic models. The results showed that the biocomposite had a better Pb(II) removal capacity in comparison to the raphia fibers alone, and its maximum Pb(II) adsorption capacity was 94.8 mg/g. The model that best describes Pb(II) sorption was the Temkin isotherm model, while kinetic studies confirmed the chemical nature of the sorption process following the Elovich model. The obtained research results provide new information on the full use of the adsorption function of biomass and the ubiquitous microbial resources and their use in the remediation of aqueous environments contaminated with heavy metals.

Preparation and of PVA-based compositions with embedded silver, copper and zinc oxide nanoparticles and assessment of their antibacterial properties.

A series of poly(vinyl alcohol) (PVA) based liquid compositions with addition of zinc oxide, silver and copper nanoparticles has been prepared. The compositions also contained other consistency-forming organic components. The physico-chemical properties of the products have been determined. Their pH and density have been assessed. Also, the size of nanoparticles has been defined with using a dynamic light scattering technique. The compositions were subjected to XRD, FT-IR and microscopic analysis as well. Thanks to the incorporation of both metal oxide and metallic nanoparticles, it was possible to enrich the products with antibacterial properties. Their inhibiting properties in the growth of microorganisms have been confirmed against both Gram-negative and Gram-positive strains such as E. coli, S. aureus and P. aeruginosa. Thanks to the ability for solidification, the compositions may be applied on a bacterially contaminated surface, and after destroying the microorganisms and its solidification, it may be peeled off along with the dead bacterial film.

Sorption behavior of Arachis hypogaea shells against Ag+ ions and assessment of antimicrobial properties of the product.

The paper presents sorption behavior of Arachis hypogaea shells towards silver ions and possibility of their use as antimicrobial product. During the modification process of the natural sorbent, equilibrium tests were carried out. Moreover, the possibility of obtaining biocomposite Arachis hypogaea shells/nAg has been determined, and its antimicrobial properties have been evaluated. Additionally, sorption kinetics has been calculated. In the last step, silver ions were desorbed. The conducted equilibrium tests allowed to adjust the sorption isotherm model and determine the sorption capacity of tested material. This process is best described by Freudlich's isotherm, and the sorption capacity is equal to 12.33 mg/g. On the basis of kinetic studies, the chemical nature of this process has been proved (by choosing a pseudo-second order model for the sorption process). It has been confirmed that the obtained peanut shells modified with silver ions have antimicrobial properties. The tests allowed to obtain 100% inhibition of Aspergillus niger and ~ 98% Escherichia coli.

Studies on CWL with glycerol for combustion process.

Findings of more efficient energy recovery methods are focused on composite fuels consisting of coal, water, and waste materials. The use of such slurry fuels has enormous environmental benefits due to the potential for waste utilization and low emissions of harmful oxides to the atmosphere during the combustion process. In this study, we report the effect of waste glycerol on the rheological properties of coal-water fuel (CWS). The addition of glycerol to CWS increases the viscosity (from 45.5 to 184.2 mPa·s at a shear rate of 100 rpm) and density (from 1.08 to 1.11 g/cm3) of these suspensions. The utility of choice of the most favorable parameters is equal to 0.85 for both CWS and CWS with added glycerol. Due to the fact that CWS is dosed to heated chamber, its modification with glycerol results in easier nebulization into the combustion chamber, lowering of the solidification temperature and increasing the calorific value of the resulting fuel. During combustion of CWS with glycerol, the amount of SO2 and NOx emitted is reduced by half as compared to the emission of these gases during hard coal combustion.

Residues from the thermal conversion of waste from the meat industry as a source of valuable macro- and micronutrients.

The increased consumption of meat (including poultry) observed over the last decade has led to the intensification of its production. With the production increase, the amount of generated waste also increases. Appropriate disposal of waste from the meat industry will significantly reduce the amount of such waste and its negative impact on the environment. The paper presents a method for the thermal neutralisation of feathers, poultry litter and meat and bone meal (MBM). Waste incineration was carried out in a stationary electric furnace, at a temperature varying in the range of 600-900°C. The resulting ashes were characterised by a high percentage of phosphorus (30-170 g/kg ash), calcium (20-360 g/kg ash) and other valuable macro- and micronutrients like copper, iron, manganese and zinc. The ashes produced during the thermal treatment are safe in terms of sanitary and can be used as additives enriching the fertilisers and soil improvers.

[Candida infections of the oral mucosa--not only a dental problem]. / Kandydoza blony sluzowej jamy ustnej problem nie tylko stomatologiczny.

UNLABELLED: Frequency of occurrence of mycotic infections of the oral mucosa is higher in later years. It is connected with common use of antibiotics, intensive cancer treatment (cytostatics, radiation therapy) as well as immunosuppressant drugs and antibiotics, which have an influence on mikroflora disorders of the oral cavity. Candidiasis of oral mucosa occurs in old patients, in people suffering from diabetes mellitus, hypothyreosis, sideropenia, hypovitaminosis and xerostomia, which is often caused by hypofunction of salivary glands during autoimmune diseases and/or drug and systemic treatment. The aim of the study was to make a retrospective evaluation of frequency of occurring mycotic infections in patients treated in the Department of Periodontology and Oral Mucosa Diseases, Medical University of Gdansk in the 2003, as well as recognition of systemic conditioning of these disorders. The Study material was clinical documentation of 4172 patients, treated because of different oral mucose and periodontium disorders. From these patients, selected was a group of 105 (83 women and 22 men) with diagnosis--Candidosis mucosae oris. Clinical and mycotic examination was performed. RESULTS: Mycotic infections were found in 105 patients (2.5%). Systemic diseases (74.3%) were found in a maturity of the patients, which indicated systemic predispositions to candida infections. CONCLUSION: A wide cooperation between general practitioners and dentists, especially perio-dontologists, is necessary to give full care to patients. Early diagnosis of disorders of the oral cavity of patients with systemic diseases and dentistry treatment or taking preventive measures seems to be necessary.