RESUMEN
Vapor sensors with both high sensitivity and broad detection range are technically challenging yet highly desirable for widespread chemical sensing applications in diverse environments. Generally, an increased surface-to-volume ratio can effectively enhance the sensitivity to low concentrations, but often with the trade-off of a constrained sensing range. Here, an approach is demonstrated for NH3 sensor arrays with an unprecedentedly broad sensing range by introducing controllable steps on the surface of an n-type single crystal. Step edges, serving as adsorption sites with electron-deficient properties, are well-defined, discrete, and electronically active. NH3 molecules selectively adsorb at the step edges and nearly eliminate known trap-like character, which is demonstrated by surface potential imaging. Consequently, the strategy can significantly boost the sensitivity of two-terminal NH3 resistance sensors on thin crystals with a few steps while simultaneously enhancing the tolerance on thick crystals with dense steps. Incorporation of these crystals into parallel sensor arrays results in ppb-to-% level detection range and a convenient linear relation between sheet conductance and semi-log NH3 concentration, allowing for the precise localization of vapor leakage. In general, the results suggest new opportunities for defect engineering of organic semiconductor crystal surfaces for purposeful vapor or chemical sensing.
RESUMEN
We showcase herein organic crystalline solid solutions (CSSs) based on the simplest polycyclic aromatic hydrocarbon (PAH) scaffold, naphthalene, stabilized by dispersion forces induced by adamantane substitution. High thermal stability of the host and guest molecules synthesized by cross-coupling of dibromonaphthalene derivatives and 4-(1-adamantyl)phenyl boronic ester enabled formation of crystals by sublimation. We could generate binary monocrystalline solid solution systems proven by X-ray crystallography, the first system of designed CSSs stabilized exclusively via dispersion forces with structural evidence. These observations are additionally supported by lattice energy calculations and spectroscopic examinations. For the generation of CSSs, it is of utmost importance that the host and guest molecules have similar lattice energies and spatial compatibility. We anticipate that the thermostable organic CSS design demonstrated herein would be beneficial for functional materials and further investigation towards materials with unique properties.
RESUMEN
Self-assembly versus complexation with polycyclic aromatic hydrocarbon (PAH) guest molecules is studied for a series of perylene bisimides (PBIs). Bulky imide substituents at the PBI guide their self-assembly into dimer aggregates with null-type exciton coupling. Host-guest titration experiments with perylene and triphenylene PAHs afford 1 : 1 and 1 : 2 complexes whose properties are studied by single crystal X-ray analysis and UV/Vis and fluorescence spectroscopy.
RESUMEN
Five chiral squaraine dimers were synthesized by fusing chiral indolenine semisquaraines with three different benzobisthiazole bridges. The thereby created squaraine dimers show a strong splitting of the lowest energy absorption bands caused by exciton coupling. The intensities of the two exciton transitions and the energetic splitting depend on the angle of the two squaraine moieties within the chromophore dimer. The electric circular dichroism spectra of the dimers show intense Cotton effects whose sign depends on the used squaraine chromophores. Sizable anisotropies gabs of up to 2.6 × 10-3 could be obtained. TD-DFT calculations were used to partition the rotational strength into the three Rosenfeld terms where the electric-magnetic coupling turned out to be the dominant contribution while the exciton chirality term is much smaller. This is because the chromophore dimers are essentially planar but the angle between the electric transition dipole moment of one squaraine and the magnetic transition dipole moment of the other squaraine strongly deviates from 90°, which makes the dot product between the two moment vectors and, thus, the rotational strength substantial.
RESUMEN
Chiral polycyclic aromatic hydrocarbons can be tailored for next-generation photonic materials by carefully designing their molecular as well as supramolecular architectures. Hence, excitonic coupling can boost the chiroptical response in extended aggregates but is still challenging to achieve by pure self-assembly. Whereas most reports on these potential materials cover the UV and visible spectral range, systems in the near infrared (NIR) are underdeveloped. We report a new quaterrylene bisimide derivative with a conformationally stable twisted π-backbone enabled by the sterical congestion of a fourfold bay-arylation. Rendering the π-subplanes accessible by small imide substituents allows for a slip-stacked chiral arrangement by kinetic self-assembly in low polarity solvents. The well dispersed solid-state aggregate reveals a sharp optical signature of strong J-type excitonic coupling in both absorption (897 nm) and emission (912 nm) far in the NIR region and reaches absorption dissymmetry factors up to 1.1 × 10-2. The structural elucidation was achieved by atomic force microscopy and single-crystal X-ray analysis which we combined to derive a structural model of a fourfold stranded enantiopure superhelix. We could deduce that the role of phenyl substituents is not only granting stable axial chirality but also guiding the chromophore into a chiral supramolecular arrangement needed for strong excitonic chirality.
RESUMEN
Two [n]heliceno-bis(naphthalimides) 1 and 2 (n = 5 and 6, respectively) where two electron-accepting naphthalimide moieties are attached at both ends of helicene core were synthesized by effective two-step strategy, and their enantiomers could be resolved by chiral stationary-phase high-performance liquid chromatography (HPLC). The single-crystal X-ray diffraction analysis of enantiopure fractions of 1 and 2 confirmed their helical structure, and together with experimental and calculated circular dichroism (CD) spectra, the absolute configuration was unambiguously assigned. Both 1 and 2 exhibit high molar extinction coefficients for the S0-S1 transition and high fluorescence quantum yields (73% for 1 and 69% for 2), both being outstanding for helicene derivatives. The red circularly polarized luminescence (CPL) emission up to 615 nm for 2 with CPL brightness (BCPL) up to 66.5 M-1 cm-1 demonstrates its potential for applications in chiral optoelectronics. Time-dependent density functional theory (TD-DFT) calculations unambiguously showed that the large transition magnetic dipole moment |m| of 2 is responsible for its high absorbance dissymmetry (gabs) and luminescence dissymmetry (glum) factor.
RESUMEN
Perylene bisimide (PBI) dyes are known as red, maroon and black pigments, whose colors depend on the close π-π stacking arrangement. However, contrary to the luminescent monomers, deep-red and black PBI pigments are commonly non- or only weakly fluorescent due to (multiple) quenching pathways. Here, we introduce N-alkoxybenzyl substituted PBIs that contain close π stacking arrangement (exhibiting dπ-π ≈ 3.5 Å, and longitudinal and transversal displacements of 3.1 Å and 1.3 Å); however, they afford deep-red emitters with solid-state fluorescence quantum yields (ΦF) of up to 60%. Systematic photophysical and computational studies in solution and in the solid state reveal a sensitive interconversion of the PBI-centred locally excited state and a charge transfer state, which depends on the dihedral angle (θ) between the benzyl and alkoxy groups. This effectively controls the emission process, and enables high ΦF by circumventing the common quenching pathways commonly observed for perylene black analogues.
RESUMEN
Human retina- and brain-inspired optoelectronic synapses, which integrate light detection and signal memory functions for data processing, have significant interest because of their potential applications for artificial vision technology. In nature, many animals such as mantis shrimp use polarized light information as well as scalar information including wavelength and intensity; however, a spectropolarimetric organic optoelectronic synapse has been seldom investigated. Herein, we report an organic synaptic phototransistor, consisting of a charge trapping liquid-crystalline perylene bisimide J-aggregate and a charge transporting crystalline dichlorinated naphthalene diimide, that can detect both wavelength and polarization information. The device shows persistent positive and negative photocurrents under low and high voltage conditions, respectively. Furthermore, the aligned organic heterostructure in the thin-film enables linearly polarized light to be absorbed with a dichroic ratio of 1.4 and 3.7 under transverse polarized blue and red light illumination, respectively. These features allow polarized light sensitive postsynaptic functions in the device. Consequently, a simple polarization imaging sensor array is successfully demonstrated using photonic synapses, which suggests that a supramolecular material is an important candidate for the development of spectropolarimetric neuromorphic vision systems.
Asunto(s)
Semiconductores , Sinapsis , Animales , Humanos , Sinapsis/química , Visión Ocular , Luz , Óptica y FotónicaRESUMEN
Yamamoto homocoupling of two chiral oxindoles led to the atropo-diastereoselective formation of an axially chiral oxindole dimer. This building block served as the starting material for the syntheses of axially chiral squaraine and merocyanine chromophore dimers. These dimers show pronounced chiroptical properties, this is, outstandingly high ECD signals (Δε up to ca. 1500 M-1 cm-1) as a couplet with positive Cotton effect for the P-configuration around the biaryl axis and a negative Cotton effect for the M-configuration. All investigated dimers also exhibit pronounced circularly polarised emission with anisotropy values of ca. 10-3 cgs. Time-dependent density functional calculations were used to analyse the three contributions (local one electron, electric-magnetic coupling, and exciton coupling) to the rotational strength applying the Rosenfeld equation to excitonically coupled chromophores. While the exciton coupling term proves to be the dominant one, the electric-magnetic coupling possesses the same sign and adds significantly to the total rotational strength owing to a favourable geometric arrangement of the two chromophores within the dimer.
RESUMEN
Heavy-atom-containing clusters, nanocrystals, and other semiconductors can sensitize the triplet states of their surface-bonded chromophores, but the energy loss, such as nonradiative deactivation, often prevents the synergistic light emission in their solid-state coassemblies. Cocrystallization allows new combinations of molecules with complementary properties for achieving functionalities not available in single components. Here, the cocrystal formation that employs platinum(II) acetylacetonate (Pt(acac)2 ) as a triplet sensitizer and electron-deficient 1,4,5,8-naphthalene diimides (NDIs) as organic phosphors is reported. The hybrid cocrystals exhibit room-temperature phosphorescence confined in the low-lying, long-lived triplet state of NDIs with photoluminescence (PL) quantum yield (ΦPL ) exceeding 25% and a phosphorescence lifetime (τPh ) of 156 µs. This remarkable PL property benefits from the noncovalent electronic and spin-orbital coupling between the constituents.
RESUMEN
A new class of perylene bisimide (PBI) derivatives is introduced by bridging 1,12- and 1,6,7,12-hydroxy functionalized bay positions with oxygen-carbon-oxygen linker(s). This functionalization rigidifies the inherently twisted bay-substituted perylene core to afford dyes of high stability and solubility that are characterized by vibronically well-resolved absorption and fluorescence spectra and intense yellow emission with quantum yields close to 100%.
RESUMEN
Graphene nanoribbons (GNRs) have the potential for next-generation functional devices. So far, GNRs with defined stereochemistry are rarely reported in literature and their optical response is usually bound to the ultraviolet or visible spectral region, while covering the near-infrared (NIR) regime is still challenging. Herein, we report two novel quaterrylene bisimides with either one- or twofold-twisted π-backbones enabled by the steric congestion of a fourfold bay arylation leading to an end-to-end twist of up to 76°. The strong interlocking effect of the π-stacked aryl substituents introduces a rigidification of the chromophore unambiguously proven by single-crystal X-ray analysis. This leads to unexpectedly strong NIR emissions at 862 and 903 nm with quantum yields of 1.5 and 0.9%, respectively, further ensuring high solubility as well as resolvable and highly stable atropo-enantiomers. Circular dichroism spectroscopy of these enantiopure chiral compounds reveals a strong Cotton effect Δε of up to 67 M-1 cm-1 centered far in the NIR region at 849 nm.
RESUMEN
A series of donor-acceptor (D-A) macrocyclic dyads consisting of an electron-poor perylene bisimide (PBI) π-scaffold bridged with electron-rich α-oligothiophenes bearing four, five, six and seven thiophene units between the two phenyl-imide substituents has been synthesized and characterized by steady-state UV/Vis absorption and fluorescence spectroscopy, cyclic and differential pulse voltammetry as well as transient absorption spectroscopy. Tying the oligothiophene strands in a conformationally fixed macrocyclic arrangement leads to a more rigid π-scaffold with vibronic fine structure in the respective absorption spectra. Electrochemical analysis disclosed charged state properties in solution which are strongly dependent on the degree of rigidification within the individual macrocycle. Investigation of the excited state dynamics revealed an oligothiophene bridge size-dependent fast charge transfer process for the macrocyclic dyads upon PBI subunit excitation.
RESUMEN
Perylene-3,4:9,10-bis(dicarboximides) (PBIs) rank among the most important functional dyes and organic semiconductors, but only recently have their radical anions and dianions attracted interest for a variety of applications. Here, we systematically elucidate the functional properties (redox, absorption, and emission) of five PBI anions and dianions bearing different bay-substituents attached to the chromophore core. Cyclic voltammetry measurements reveal the influence of the substituents ranging from electron-withdrawing cyano to electron-donating phenoxy groups on the oxidation and reduction potentials that relate to the HOMO and LUMO levels ranging from -7.07 eV to -6.05 eV and -5.01 eV to -4.05 eV, respectively. Spectroelectrochemical studies reveal a significant number of intense absorption bands in the NIR-spectral range (750-1400 nm) for the radical anions, whereas the dianionic species are characterized by similar spectra to those for the neutral dyes, however being bathochromically shifted and with increased molar extinction coefficients of approximately 100 000 M-1 cm-1. The increase of the transition dipole moment is up to 56% and accompanied by an almost cyanine-like red-shifted (by 300 nm) absorption spectrum for the most electron-poor tetracyanotetrachloro PBI. Whilst the outstanding fluorescence properties of the neutral PBIs are lost for the radical anions, an appreciable near-infrared (NIR) fluorescence with a quantum yield of up to 18% is revealed for the dianions by utilizing a custom-built flow-cell spectroelectrochemistry setup. Time-dependent density functional theory calculations help to assign the absorption bands to the respective electronic transitions.
RESUMEN
Two macrocyclic architectures comprising oligothiophene strands that connect the imide positions of a perylene bisimide (PBI) dye have been synthesized via a platinum-mediated cross-coupling strategy. The crystal structure of the double bridged PBI reveals all syn-arranged thiophene units that completely enclose the planar PBI chromophore via a 12-membered macrocycle. The target structures were characterized by steady-state UV/Vis absorption, fluorescence and transient absorption spectroscopy, as well as cyclic and differential pulse voltammetry. Both donor-acceptor dyads show ultrafast Förster Resonance Energy Transfer and photoinduced electron transfer, thereby leading to extremely low fluorescence quantum yields even in the lowest polarity cyclohexane solvent.
RESUMEN
Dye-dye interactions affect the optical and electronic properties in organic semiconductor films of light harvesting and detecting optoelectronic applications. This review elaborates how to tailor these properties of organic semiconductors for organic solar cells (OSCs) and organic photodiodes (OPDs). While these devices rely on similar materials, the demands for their optical properties are rather different, the former requiring a broad absorption spectrum spanning from the UV over visible up to the near-infrared region and the latter an ultra-narrow absorption spectrum at a specific, targeted wavelength. In order to design organic semiconductors satisfying these demands, fundamental insights on the relationship of optical properties are provided depending on molecular packing arrangement and the resultant electronic coupling thereof. Based on recent advancements in the theoretical understanding of intermolecular interactions between slip-stacked dyes, distinguishing classical J-aggregates with predominant long-range Coulomb coupling from charge transfer (CT)-mediated or -coupled J-aggregates, whose red-shifts are primarily governed by short-range orbital interactions, is suggested. Within this framework, the relationship between aggregate structure and functional properties of representative classes of dye aggregates is analyzed for the most advanced OSCs and wavelength-selective OPDs, providing important insights into the rational design of thin-film optoelectronic materials.
RESUMEN
Aggregation-induced emission enhancement (AIEE) phenomena received great popularity during the last decade but in most cases insights into the packing structure - fluorescence properties remained scarce. Here, an almost non-fluorescent merocyanine dye was equipped with large solubilizing substituents, which allowed the investigation of it's aggregation behaviour in unpolar solvents over a large concentration range (10-2 to 10-7 M). In depth analysis of the self-assembly process by concentration-dependent UV/Vis spectroscopy at different temperatures revealed a two-step anti-cooperative aggregation mechanism. In the first step a co-facially stacked dimer is formed driven by dipole-dipole interactions. In a second step these dimers self-assemble to give an oligomer stack consisting of about ten dyes. Concentration- and temperature-dependent UV/Vis spectroscopy provided insight into the thermodynamic parameters and allowed to identify conditions where either the monomer, the dimer or the decamer prevails. The centrosymmetric dimer structure could be proven by 2D NMR spectroscopy. For the larger decamer atomic force microscopy (AFM), diffusion ordered spectroscopy (DOSY) and vapour pressure osmometric (VPO) measurements consistently indicated that it is of small and defined size. Fluorescence, circular dichroism (CD) and circularly polarized luminescence (CPL) spectroscopy provided insights into the photofunctional properties of the dye aggregates. Starting from an essentially non-fluorescent monomer (Φ Fl = 0.23%) a strong AIEE effect with excimer-type fluorescence (large Stokes shift, increased fluorescence lifetime) is observed upon formation of the dimer (Φ Fl = 2.3%) and decamer (Φ Fl = 4.5%) stack. This increase in fluorescence is accompanied for both aggregates by an aggregation-induced CPL enhancement with a strong increase of the g lum from â¼0.001 for the dimer up to â¼0.011 for the higher aggregate. Analysis of the radiative and non-radiative decay rates corroborates the interpretation that the AIEE effect originates from a pronounced decrease of the non-radiative rate due to π-π-stacking induced rigidification that outmatches the effect of the reduced radiative rate that originates from the H-type exciton coupling in the co-facially stacked dyes.
RESUMEN
Chemical doping controls the electronic properties of organic semiconductors, but so far, doping protocols and mechanisms are less developed than in conventional semiconductors. Here we describe a unique, site-specific, n-type surface doping mechanism for single crystals of two benchmark organic semiconductors that produces dramatic improvement in electron transport and provides unprecedented evidence for doping-induced space charge. The surface doping chemistry specifically targets crystallographic step edges, which are known electron traps, simultaneously passivating the traps and releasing itinerant electrons. The effect on electron transport is profound: field-effect electron mobility increases by as much as a factor of ten, and its temperature-dependent behaviour switches from thermally activated to band-like. Our findings suggest new site-specific strategies to dope organic semiconductors that differ from the conventional redox chemistry of randomly distributed substitutional impurities. Critically, they also verify the presence of doping-induced electron atmospheres, confirming long-standing expectations for organic systems from conventional solid-state theory.
RESUMEN
Fluorophores emitting in the near-infrared (NIR) are highly desired for various applications, but increasing nonradiative rates cause severe fluorescence quenching for wavelengths beyond 800 nm. Here, a bis(squaraine) dye is reported that bears two NIR dyes in a head-to-tail chromophore arrangement. This arrangement leads to intramolecular J-type exciton coupling, resulting in an absorption maximum at 961 nm and a fluorescence peak at 971 nm with a quantum yield of 0.33% in chloroform. In less polar toluene, the bis(squaraine) self-assembles into nanofibers, affording another bathochromic shift with an absorption maximum at 1095 nm and a fluorescence peak at 1116 nm originating from intermolecular J-type coupling.