Elucidation of the role of metals in the adsorption and photodegradation of herbicides by metal-organic frameworks.

Here, four MOFs, namely Sc-TBAPy, Al-TBAPy, Y-TBAPy, and Fe-TBAPy (TBAPy: 1,3,6,8-tetrakis(p-benzoic acid)pyrene), were characterized and evaluated for their ability to remediate glyphosate (GP) from water. Among these materials, Sc-TBAPy demonstrates superior performance in both the adsorption and degradation of GP. Upon light irradiation for 5 min, Sc-TBAPy completely degrades 100% of GP in a 1.5 mM aqueous solution. Femtosecond transient absorption spectroscopy reveals that Sc-TBAPy exhibits enhanced charge transfer character compared to the other MOFs, as well as suppressed formation of emissive excimers that could impede photocatalysis. This finding was further supported by hydrogen evolution half-reaction (HER) experiments, which demonstrated Sc-TBAPy's superior catalytic activity for water splitting. In addition to its faster adsorption and more efficient photodegradation of GP, Sc-TBAPy also followed a selective pathway towards the oxidation of GP, avoiding the formation of toxic aminomethylphosphonic acid observed with the other M3+-TBAPy MOFs. To investigate the selectivity observed with Sc-TBAPy, electron spin resonance, depleted oxygen conditions, and solvent exchange with D2O were employed to elucidate the role of different reactive oxygen species on GP photodegradation. The findings indicate that singlet oxygen (1O2) plays a critical role in the selective photodegradation pathway achieved by Sc-TBAPy.

Hydrogen Adsorption in Ultramicroporous Metal-Organic Frameworks Featuring Silent Open Metal Sites.

In this study, we utilized an ultramicroporous metal-organic framework (MOF) named [Ni3(pzdc)2(ade)2(H2O)4]·2.18H2O (where H3pzdc represents pyrazole-3,5-dicarboxylic acid and ade represents adenine) for hydrogen (H2) adsorption. Upon activation, [Ni3(pzdc)2(ade)2] was obtained, and in situ carbon monoxide loading by transmission infrared spectroscopy revealed the generation of open Ni(II) sites. The MOF displayed a Brunauer-Emmett-Teller (BET) surface area of 160 m2/g and a pore size of 0.67 nm. Hydrogen adsorption measurements conducted on this MOF at 77 K showed a steep increase in uptake (up to 1.93 mmol/g at 0.04 bar) at low pressure, reaching a H2 uptake saturation at 2.11 mmol/g at ∼0.15 bar. The affinity of this MOF for H2 was determined to be 9.7 ± 1.0 kJ/mol. In situ H2 loading experiments supported by molecular simulations confirmed that H2 does not bind to the open Ni(II) sites of [Ni3(pzdc)2(ade)2], and the high affinity of the MOF for H2 is attributed to the interplay of pore size, shape, and functionality.

Multivariate metal-organic frameworks generated through post-synthetic modification: impact and future directions.

Reticular chemistry has proven to be invaluable over time, thanks to the structural versatility, and tailored porosity observed in structures like metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and metal-organic polyhedra (MOPs). Despite the wide array of ligands and metals available for synthesizing MOFs, they are still somewhat constrained by the reliance on de novo conditions and the focus on generating MOFs with single ligand and metal. To surpass these limitations, researchers have established strategies to generate multivariate (MTV) MOF structures incorporating more than one ligand/metal into the crystal lattice. MTV-MOFs have demonstrated enhanced properties by virtue of the additional functionalities incorporated within their structures. One approach to developing MTV-MOFs is through post-synthetic modification (PSM), where new functionalities are introduced after the initial synthesis, thereby achieving the enhanced properties of MTV-MOFs even in cases where the new functionalities are incompatible with MOF synthesis.

Strengthening Aqueous Electrolytes without Strengthening Water.

Aqueous electrolytes typically suffer from poor electrochemical stability; however, eutectic aqueous solutions-25 wt.% LiCl and 62 wt.% H3 PO4 -cooled to -78 °C exhibit a significantly widened stability window. Integrated experimental and simulation results reveal that, upon cooling, Li+ ions become less hydrated and pair up with Cl- , ice-like water clusters form, and H⋅⋅⋅Cl- bonding strengthens. Surprisingly, this low-temperature solvation structure does not strengthen water molecules' O-H bond, bucking the conventional wisdom that increasing water's stability requires stiffening the O-H covalent bond. We propose a more general mechanism for water's low temperature inertness in the electrolyte: less favorable solvation of OH- and H+ , the byproducts of hydrogen and oxygen evolution reactions. To showcase this stability, we demonstrate an aqueous Li-ion battery using LiMn2 O4 cathode and CuSe anode with a high energy density of 109 Wh/kg. These results highlight the potential of aqueous batteries for polar and extraterrestrial missions.

Biomimetic Photodegradation of Glyphosate in Carborane-Functionalized Nanoconfined Spaces.

The removal of organophosphorus (OP) herbicides from water has been studied using adsorptive removal, chemical oxidation, electrooxidation, enzymatic degradation, and photodegradation. The OP herbicide glyphosate (GP) is one of the most used herbicides worldwide, leading to excess GP in wastewater and soil. GP is commonly broken down in environmental conditions to compounds such as aminomethylphosphonic acid (AMPA) or sarcosine, with AMPA having a longer half-life and similar toxicity to GP. Metal-organic frameworks (MOFs) are excellent materials for purifying OP herbicides from water due to their ability to combine adsorption and photoactivity within one material. Herein, we report the use of a robust Zr-based MOF with a meta-carborane carboxylate ligand (mCB-MOF-2) to examine the adsorption and photodegradation of GP. The maximum adsorption capacity of mCB-MOF-2 for GP was determined to be 11.4 mmol/g. Non-covalent intermolecular forces between the carborane-based ligand and GP within the micropores of mCB-MOF-2 are thought to be responsible for strong binding affinity and capture of GP. After 24 h of irradiation with ultraviolet-visible (UV-vis) light, mCB-MOF-2 selectively converts 69% of GP to sarcosine and orthophosphate, following the C-P lyase enzymatic pathway and biomimetically photodegrading GP. Circumventing the production of AMPA is desirable, as it has a longer half-life and similar toxicity to GP. The exceptional adsorption capacity of GP by mCB-MOF-2 and its biomimetic photodegradation to non-toxic sarcosine make it a promising material for removing OP herbicides from water.

Hypsochromically-shifted Emission of Metal-organic Frameworks Generated through Post-synthetic Ligand Reduction.

Luminescent materials with tunable emission are becoming increasingly desirable as we move towards needing efficient Light Emitting Diodes (LEDs) for displays. Key to developing better displays is the advancement of strategies for rationally designing emissive materials that are tunable and efficient. We report a series of emissive metal-organic frameworks (MOFs) generated using BUT-10 (BUT: Beijing University of Technology) that emits green light with λmax at 525 nm. Post-synthetic reduction of the ketone on the fluorenone ligand in BUT-10 generates new materials, BUT-10-M and BUT-10-R. The emission for BUT-10-R is hypsochromically-shifted by 113 nm. Multivariate BUT-10-M structures demonstrate emission with two maxima corresponding to the emission of both fluorenol and fluorenone moieties present in their structures. Our study represents a novel post-synthetic ligand reduction strategy for producing emissive MOFs with tunable emission ranging from green, white-blue to deep blue.

Bismuth-Polyoxocation Coordination Networks: Controlling Nuclearity and Dimension-Dependent Photocatalysis.

Bismuth-oxocluster nodes for metal-organic frameworks (MOFs) and coordination networks/polymers are less prolific than other families featuring zinc, zirconium, titanium, lanthanides, etc. However, Bi3+ is non-toxic, it readily forms polyoxocations, and its oxides are exploited in photocatalysis. This family of compounds provides opportunity in medicinal and energy applications. Here, we show that Bi node nuclearity depends on solvent polarity, leading to a family of Bix-sulfonate/carboxylate coordination networks with x = 1-38. Larger nuclearity-node networks were obtained from polar and strongly coordinating solvents, and we attribute the solvent's ability to stabilize larger species in solution. The strong role of the solvent and the lesser role of the linker in defining node topologies differ from other MOF syntheses, and this is due to the Bi3+ intrinsic lone pair that leads to weak node-linker interactions. We describe this family by single-crystal X-ray diffraction (eleven structures), obtained in pure forms and high yields. Ditopic linkers include NDS (1,5-naphthalenedisulfonate), DDBS (2,2'-[biphenyl-4,4'-diylchethane-2,1-diyl] dibenzenesulphonate), and NH2-benzendicarboxylate (BDC). While the BDC and NDS linkers yield more open-framework topologies that resemble those obtained by carboxylate linkers, topologies with DDBS linkers appear to be in part driven by association between DDBS molecules. An in situ small-angle X-ray scattering study of Bi38-DDBS reveals stepwise formation, including Bi38-assembly, pre-organization in solution, followed by crystallization, confirming the less important role of the linker. We demonstrate photocatalytic hydrogen (H2) generation with select members of the synthesized materials without the benefit of a co-catalyst. Band gap determination from X-ray photoelectron spectroscopy (XPS) and UV-vis data suggest the DDBS linker effectively absorbs in the visible range with ligand-to-Bi-node charge transfer. In addition, materials containing more Bi (larger Bi38-nodes or Bi6 inorganic chains) exhibit strong UV absorption, also contributing to effective photocatalysis by a different mechanism. All tested materials became black with extensive UV-vis exposure, and XPS, transmission electron microscopy, and X-ray scattering of the black Bi38-framework suggest that Bi0 is formed in situ, without phase segregation. This evolution leads to enhanced photocatalytic performance, perhaps due to increased light absorption.

Ammonia Capture in Rhodium(II)-Based Metal-Organic Polyhedra via Synergistic Coordinative and H-Bonding Interactions.

Ammonia (NH3) is among the world's most widely produced bulk chemicals, given its extensive use in diverse sectors such as agriculture; however, it poses environmental and health risks at low concentrations. Therefore, there is a need for developing new technologies and materials to capture and store ammonia safely. Herein, we report for the first time the use of metal-organic polyhedra (MOPs) as ammonia adsorbents. We evaluated three different rhodium-based MOPs: [Rh2(bdc)2]12 (where bdc is 1,3-benzene dicarboxylate); one functionalized with hydroxyl groups at its outer surface [Rh2(OH-bdc)2]12 (where OH-bdc is 5-hydroxy-1,3-benzene dicarboxylate); and one decorated with aliphatic alkoxide chains at its outer surface [Rh2(C12O-bdc)2]12 (where C12O-bdc is 5-dodecoxybenzene-1,3-benzene dicarboxylate). Ammonia-adsorption experiments revealed that all three Rh-MOPs strongly interact with ammonia, with uptake capacities exceeding 10 mmol/gMOP. Furthermore, computational and experimental data showed that the mechanism of the interaction between Rh-MOPs and ammonia proceeds through a first step of coordination of NH3 to the axial site of the Rh(II) paddlewheel cluster, which triggers the adsorption of additional NH3 molecules through H-bonding interaction. This unique mechanism creates H-bonded clusters of NH3 on each Rh(II) axial site, which accounts for the high NH3 uptake capacity of Rh-MOPs. Rh-MOPs can be regenerated through their immersion in acidic water, and upon activation, their ammonia uptake can be recovered for at least three cycles. Our findings demonstrate that MOPs can be used as porous hosts to capture corrosive molecules like ammonia, and that their surface functionalization can enhance the ammonia uptake performance.

Photoactive Organo-Sulfur Polymers for Hydrogen Generation.

Herein, we report the synthesis of photoactive polymeric organo-sulfur (POS) materials. These polymers absorb light in the ultraviolet/visible and near-infrared region of the solar spectrum, and upon irradiation, they reduce water to hydrogen (H2 ). The decoration of POS materials with nitrile (-CN) groups is found to be the critical factor for enhanced interactions with the co-catalyst, Ni2 P, leading to greater H2 evolution rates compared to the nitrile-free POS material.

Wet flue gas CO2 capture and utilization using one-dimensional metal-organic chains.

Herein, we describe the use of an ultramicroporous metal-organic framework (MOF) with a composition of [Ni3(pzdc)2(ade)2(H2O)1.5]·(H2O)1.3 (pzdc: 3,5-pyrazole dicarboxylic acid; ade: adenine), for the selective capture of carbon dioxide (CO2) from wet flue gas followed by its conversion to value-added products. This MOF is comprised of one-dimensional Ni(II)-pyrazole dicarboxylate-adenine chains; through pi-pi stacking and H-bonding interactions, these one-dimensional chains stack into a three-dimensional supramolecular structure with a one-dimensional pore network. Upon heating, our MOF undergoes a color change from light blue to lavender, indicating a change in the coordination geometry of Ni(II). Variable temperature ultraviolet-visible (UV/vis) spectroscopy data revealed a blue shift of the d-d transitions, suggesting a change in the Ni-coordination geometry from octahedral to a mixture of square planar and square pyramidal. The removal of the water molecules coordinated to Ni(II) leads to the generation of a MOF with open Ni(II) sites. Nitrogen isotherms collected at 77 K and 1 bar revealed that this MOF is microporous with a pore volume of 0.130 cm3 g-1. Carbon dioxide isotherms show a step in the uptake at low pressure, after which the CO2 uptake is saturated. The step in the CO2 uptake is likely attributable to the rearrangement of the three-dimensional supramolecular structure to accommodate CO2 within its pores. The affinity of this MOF for CO2 is 35.5 kJ mol-1 at low loadings, and it increases to 41.9 kJ mol-1 at high loadings. While our MOF is porous to CO2 and water (H2O) at 298 K, it is not porous to N2, and the CO2/N2 selectivity increases from 28.5 to 31.5 as a function of pressure. Breakthrough experiments reveal that this MOF can capture CO2 from dry and wet flue gas with uptake capacities of 1.48 ± 0.01 and 1.14 ± 0.06 mmol g-1, respectively. The MOF can be regenerated and reused at least three times, demonstrating consistent CO2 uptake capacities. Upon understanding the sorption behavior of this MOF, catalysis experiments show that the MOF is catalytically active in the fixation of CO2 into an epoxide ring for the formation of a cyclic carbonate. The turnover frequency for this reaction is 21.95 ± 0.03 h-1. The MOF showed no catalytic deterioration after two cycles and maintained comparable catalytic activity when dry and wet CO2/N2 mixtures were used. This highlights that both N2 and H2O do not dramatically affect the catalytic activity of our MOF toward CO2 fixation.

Sustainable and Chemoselective Synthesis of α-Aminonitriles Using Lewis and Brønsted Acid-Functionalized Nanoconfined Spaces.

α-Aminonitriles are significant components in the synthesis of biological compounds and complex drugs. Although efficient, procedures for synthesizing α-aminonitriles suffer from high loadings of expensive catalysts, long reaction times, energy-intensive conditions, and expensive, toxic solvents. Herein, we report the use of metal-organic framework Cr-MIL-101-SO3H as a catalyst for the facile synthesis of eight α-aminonitriles, five of which are reported as new molecules. We found that the presence of both open Cr3+ Lewis and -SO3H Brønsted acids in the MIL-101 pores is vital for the one-pot synthesis of α-aminonitriles. The catalytic reaction is conducted under solvent-free conditions at room temperature and a Cr-MIL-101-SO3H loading of 1% by the total mass, which is considered a sustainable synthetic pathway of α-aminonitriles. Additionally, we demonstrated for the first time that Cr-MIL-101-SO3H exhibits a high degree of catalytic chemoselectivity, differing substrates with sterically hindered and electronically withdrawn functional groups. Our study expands the existing family of α-aminonitriles and provides an intelligent strategy for the development of catalysts that can be used to synthesize functional α-aminonitriles with potential in therapeutics and health applications.

Degradation of G-Type Nerve Agent Simulant with Phase-Inverted Spherical Polymeric-MOF Catalysts.

For the neutralization of chemical warfare agents (CWAs), the generation of an effective catalyst that can be handled safely and applied in personal protective equipment is required. Recently, zirconium-based metal-organic frameworks (Zr-MOFs: UiO-66 and UiO-67) have shown great promise in the degradation of CWAs, including nerve agents. Their catalytic activity is owed to the interplay of both Zr(IV) Lewis acids and Lewis basic groups in the MOF structure. The latter act as proximal bases that can interact with CWAs and improve the catalytic activity of Zr-MOFs. The powder form of MOFs, though, makes them impractical catalysts, as it is challenging to handle, regenerate, and reuse them. To address this challenge, we have synthesized three Zr-MOFs with Lewis basic amino and pyridine functionalities and shaped them in spherical polymeric beads using the phase inversion method. Using this method, we can generate beads with many polymer and MOF combinations (MOF@polymer). We controlled the MOF loading in these beads, and scanning electron microscopy images revealed that the MOF crystals are evenly distributed in the polymeric matrix, ensuring effective catalytic activity. We used these beads to degrade dimethyl p-nitrophenyl phosphate (DMNP), a simulant for the G-type nerve agent. Using 31P NMR, we showed that UiO-66-NH2@PES and UiO-67-(NH2)2@PES PES: poly(ether sulfone) beads destruct DMNP to dimethyl phosphate (DMP) with a half-life (t1/2) of 5.09 and 4.34 min, respectively. Beads made of hydrophobic polymers such as poly(vinylidene fluoride) (PVDF), polystyrene (PS), and Zr-MOFs with pyridine functionalities show that the quantitative hydrolysis of DMNP requires more time compared to that seen with the UiO-66-NH2@PES beads. Our work highlights the facile shaping of MOF powders into beads that can be easily regenerated with their catalytic activity to be maintained for at least three cycles of use.

Colorimetric detection of acidic pesticides in water.

A water-stable, porphyrin-based metal-organic framework (MOF) produces a distinct colour change in response to acids' pKa and concentrations. This colour change is associated with the protonation of the N-atoms within the porphyrin ligand present in the MOF structure. As a proof-of-concept, we demonstrate the use of this MOF for detecting traces of different acidic pesticides present in water samples spontaneously.

Enhanced Visible-Light-Driven Hydrogen Production through MOF/MOF Heterojunctions.

A strategy for enhancing the photocatalytic performance of MOF-based systems (MOF: metal-organic framework) is developed through the construction of MOF/MOF heterojunctions. The combination of MIL-167 with MIL-125-NH2 leads to the formation of MIL-167/MIL-125-NH2 heterojunctions with improved optoelectronic properties and efficient charge separation. MIL-167/MIL-125-NH2 outperforms its single components MIL-167 and MIL-125-NH2, in terms of photocatalytic H2 production (455 versus 0.8 and 51.2 µmol h-1 g-1, respectively), under visible-light irradiation, without the use of any cocatalysts. This is attributed to the appropriate band alignment of these MOFs, the enhanced visible-light absorption, and long charge separation within MIL-167/MIL-125-NH2. Our findings contribute to the discovery of novel MOF-based photocatalytic systems that can harvest solar energy and exhibit high catalytic activities in the absence of cocatalysts.

Tuning the Optoelectronic Properties of Hybrid Functionalized MIL-125-NH2 for Photocatalytic Hydrogen Evolution.

Metal-organic frameworks (MOFs) constructed with mixed ligands have shown great promise in the generation of materials with improved sorption, optical, and electronic properties. With an experimental, spectroscopic, and computational approach, herein, we investigated how the incorporation of different functionalized ligands within the structure of MIL-125-NH2 affects its performance in photocatalytic water reduction. We found that multiligand incorporation within the MOF structure has an impact on the light absorption spectrum and the electronic structure. These combined modifications improve the photocatalytic performance of MIL-125-NH2, thereby increasing the rate of hydrogen evolution reaction. Of the four nanoparticle/MOF photocatalytic systems tested, we showed that the Pt/MIL-125-NH2/(OH)2 system (Pt nanoparticle plus MIL-125-NH2 with amino and dihydroxyl functionalized ligands) outperforms its counterpart Pt/MIL-125-NH2 system, attributed to the enhanced p-π conjugation between the lone pairs of O atoms and their aromatic ligands resulting in a red-shifted absorption spectrum and greater spatial distribution of electron density.

A recyclable metal-organic framework for ammonia vapour adsorption.

Herein, we present a new strategy to design metal-organic frameworks (MOFs) as adsorbents for ammonia (NH3) vapour. The linking ligand is functionalized with a sterically hindered Lewis acidic boron (B) centre, allowing efficient capture of NH3 and easy recycling of the MOF by simply heating at low temperature. The recycled MOF material can be used for NH3 capture for at least 5 cycles without losing its crystallinity or its luminescence properties.

CO2 Methanation via Amino Alcohol Relay Molecules Employing a Ruthenium Nanoparticle/Metal Organic Framework Catalyst.

Methanation of carbon dioxide (CO2 ) is attractive within the context of a renewable energy refinery. Herein, we report an indirect methanation method that harnesses amino alcohols as relay molecules in combination with a catalyst comprising ruthenium nanoparticles (NPs) immobilized on a Lewis acidic and robust metal-organic framework (MOF). The Ru NPs are well dispersed on the surface of the MOF crystals and have a narrow size distribution. The catalyst efficiently transforms amino alcohols to oxazolidinones (upon reaction with CO2 ) and then to methane (upon reaction with hydrogen), simultaneously regenerating the amino alcohol relay molecule. This protocol provides a sustainable, indirect way for CO2 methanation as the process can be repeated multiple times.

Sustainable Capture of Aromatic Volatile Organic Compounds by a Pyrene-Based Metal-Organic Framework under Humid Conditions.

The threat posed by the presence of artificial volatile organic compounds (VOCs) in the environment is a widely acknowledged fact, both for environmental issues and human health concerns. Ever-increasing production requires the continuous development of technologies toward the removal of these substances. In recent years, metal-organic frameworks (MOFs) have shown a great promise toward the capture of VOCs, but their stability in humid conditions still remains a major challenge, thus hindering their widespread development. To tackle this obstacle, we designed a 3-dimensional and porous MOF, named SION-82, for the capture of small aromatic VOCs, relying solely on π-π interactions. SION-82 captures benzene efficiently (107 mg/g) in dry conditions, and no uptake decrease was observed in the presence of high relative humidity for at least six cycles. Unlike HKUST-1 and MOF-74(Co), SION-82 possesses two vital characteristics toward sustainable benzene capture under humid conditions: moisture stability and reusability. In addition, SION-82 captures benzene under humid conditions more efficiently compared to the hydrolytically stable UiO-66, highlighting the impact of having an active site for benzene capture that is not affected by water. SION-82 can additionally capture other aromatic VOCs, showing pyridine and thiophene uptake capacities of 140 and 160 mg/g, respectively.

A Highly Water-Stable meta-Carborane-Based Copper Metal-Organic Framework for Efficient High-Temperature Butanol Separation.

Biofuels are considered sustainable and renewable alternatives to conventional fossil fuels. Biobutanol has recently emerged as an attractive option compared to bioethanol and biodiesel, but a significant challenge in its production lies in the separation stage. The current industrial process for the production of biobutanol includes the ABE (acetone-butanol-ethanol) fermentation process from biomass; the resulting fermentation broth has a butanol concentration of no more than 2 wt% (the rest is essentially water). Therefore, the development of a cost-effective process for separation of butanol from dilute aqueous solutions is highly desirable. The use of porous materials for the adsorptive separation of ABE mixtures is considered a highly promising route, as these materials can potentially have high affinities for alcohols and low affinities for water. To date, zeolites have been tested toward this separation, but their hydrophilic nature makes them highly incompetent for this application. The use of metal-organic frameworks (MOFs) is an apparent solution; however, their low hydrolytic stabilities hinder their implementation in this application. So far, a few nanoporous zeolitic imidazolate frameworks (ZIFs) have shown excellent potential for butanol separation due to their good hydrolytic and thermal stabilities. Herein, we present a novel, porous, and hydrophobic MOF based on copper ions and carborane-carboxylate ligands, mCB-MOF-1, for butanol recovery. mCB-MOF-1 exhibits excellent stability when immersed in organic solvents, water at 90 °C for at least two months, and acidic and basic aqueous solutions. We found that, like ZIF-8, mCB-MOF-1 is non-porous to water (type II isotherm), but it has higher affinity for ethanol, butanol, and acetone compared to ZIF-8, as suggested by the shape of the vapor isotherms at the crucial low-pressure region. This is reflected in the separation of a realistic ABE mixture in which mCB-MOF-1 recovers butanol more efficiently compared to ZIF-8 at 333 K.