RESUMEN
Chitosan, as a kind of naturally occurring green and degradable material for the preservation of perishable foods, was investigated in this study with the objective of enhancing its preservation performances. Herein, lignin was modified using the solvent fractionation method (modified lignin, ML, including ML1-ML3), while natural clinoptilolite zeolite was modified using the alkali modification method (modified clinoptilolite zeolite, MCZ, including MCZ1-MCZ5). After optimizing the conditions, it was discovered that incorporating both ML3 and MCZ3 into pure chitosan-based membranes might be conducive to fabricate chitosan-based composite membranes for the preservation of perishable foods. As-prepared composite membranes possessed better visible light transmittance, antioxidant activity, and carbon dioxide/oxygen selectivity, resulting in improved preservation effects on the model perishable foods such as bananas, cherry tomatoes, and cheeses. These findings might indicate promising applications for chitosan-based composite membranes with modified lignin and zeolite in the field of eco-friendly degradable materials for the preservation of perishable foods.
RESUMEN
The reconstruction of Cu catalysts during electrochemical reduction of CO2 is a widely known but poorly understood phenomenon. Herein, we examine the structural evolution of Cu nanocubes under CO2 reduction reaction and its relevant reaction conditions using identical location transmission electron microscopy, cyclic voltammetry, in situ X-ray absorption fine structure spectroscopy and ab initio molecular dynamics simulation. Our results suggest that Cu catalysts reconstruct via a hitherto unexplored yet critical pathway - alkali cation-induced cathodic corrosion, when the electrode potential is more negative than an onset value (e.g., -0.4 VRHE when using 0.1 M KHCO3). Having alkali cations in the electrolyte is critical for such a process. Consequently, Cu catalysts will inevitably undergo surface reconstructions during a typical process of CO2 reduction reaction, resulting in dynamic catalyst morphologies. While having these reconstructions does not necessarily preclude stable electrocatalytic reactions, they will indeed prohibit long-term selectivity and activity enhancement by controlling the morphology of Cu pre-catalysts. Alternatively, by operating Cu catalysts at less negative potentials in the CO electrochemical reduction, we show that Cu nanocubes can provide a much more stable selectivity advantage over spherical Cu nanoparticles.
RESUMEN
Plasmonic Cu@semiconductor heteronanocrystals (HNCs) have many favorable properties, but the synthesis of solid structures is often hindered by the nanoscale Kirkendall effect. Herein, we present the use of an atomically thin Au3Cu palisade interlayer to reduce lattice mismatch and mediate the Kirkendall effect, enabling the successive topological synthesis of Cu@Au3Cu@Ag, Cu@Au3Cu@Ag2S, and further transformed solid Cu@Au3Cu@CdS core-shell HNCs via cation exchange. The atomically thin and intact Au3Cu palisade interlayer effectively modulates the diffusion kinetics of Cu atoms as demonstrated by experimental and theoretical investigations and simultaneously alleviates the lattice mismatch between Cu and Ag as well as Cu and CdS. The Cu@Au3Cu@CdS HNCs feature exceptional crystallinity and atomically organized heterointerfaces between the plasmonic metal and the semiconductor. This results in the efficient plasmon-induced injection of hot electrons from Cu@Au3Cu into the CdS shell, enabling the Cu@Au3Cu@CdS HNCs to achieve high activity and selectivity for the photocatalytic reduction of CO2 to CO.
RESUMEN
van der Waals ferroic materials exhibit rich potential for implementing future generation functional devices. Among these, layered ß'-In2Se3 has fascinated researchers with its complex superlattice and domain structures. As opposed to ferroelectric α-In2Se3, the understanding of ß'-In2Se3 ferroic properties remains unclear because ferroelectric, antiferroelectric, and ferroelastic characteristics have been separately reported in this material. To develop useful applications, it is necessary to understand the microscopic structural properties and their correlation with macroscopic device characteristics. Herein, using scanning transmission electron microscopy (STEM), we observed that the arrangement of dipoles deviates from the ideal double antiparallel antiferroelectric character due to competition between antiferroelectric and ferroelectric structural ordering. By virtue of second-harmonic generation, four-dimensional STEM, and in-plane piezoresponse force microscopy, the long-range inversion-breaking symmetry, uncompensated local polarization, and net polarization domains are unambiguously verified, revealing ß'-In2Se3 as an in-plane ferrielectric layered material. Additionally, our device study reveals analogous resistive switching behaviors of different types owing to polarization switching, defect migration, and defect-induced charge trapping/detrapping processes.
RESUMEN
The development of nonantibiotic strategies to combat bacterial infection is highly needed, owing to the widespread infectious disease and bacterial resistance becoming a significant health threat to the world's population. In recent years, photoactivated antibacterial therapies including photocatalytic and photothermal therapies have attracted increasing attention due to their high efficiency and low side effect. Herein, we introduce a copper sulfide (Cu2-xS) hollow nanostructure-based near-infrared antibacterial platform with synergy photothermal and photocatalytic properties for effective bacterial sterilization. Compared to traditional Cu2-xS nanoparticles, this unique hollow Cu2-xS nanostructure can generate multiple scattered light, which is conducive to light collection. Moreover, its thin shell can shorten the transmission distance of carrier, thus reducing the charge recombination that usually causes the greatest energy loss. As a result, such a Cu2-xS hollow nanostructure enables enhanced photothermal and photocatalytic bacterial killing activities against both Escherichia coli and Staphylococcus aureus, showing promise for antibiotic-free infection treatment and other bacterial sterilization applications.
Asunto(s)
Cobre , Nanoestructuras , Cobre/farmacología , Cobre/química , Escherichia coli , Esterilización , Bacterias , Sulfuros/farmacología , Sulfuros/química , Antibacterianos/farmacología , Antibacterianos/químicaRESUMEN
Photoacoustic imaging (PAI) and imaging-guided photothermal therapy (PTT) in the second near-infrared window (NIR-II, 1000-1700 nm) have received increasing attention owing to their advantages of greater penetration depth and higher signal-to-noise ratio. Plasmonic nanomaterials with tunable optical properties and strong light absorption provide an alternative to dye molecules, showing great prospects for phototheranostic applications. In this review, the research progress in principally modulating the optical properties of plasmonic nanomaterials, especially affecting parameters such as size, morphology, and surface chemical modification, is introduced. The commonly used plasmonic nanomaterials in the NIR-II window, including noble metals, semiconductors, and heterostructures, are then summarized. In addition, the biomedical applications of these NIR-II plasmonic nanomaterials for PAI and PTT in phototheranostics are highlighted. Finally, the perspectives and challenges for advancing plasmonic nanomaterials for practical use and clinical translation are discussed.
Asunto(s)
Nanopartículas , Nanoestructuras , Técnicas Fotoacústicas , Terapia Fototérmica , Técnicas Fotoacústicas/métodos , Nanoestructuras/uso terapéutico , Fototerapia/métodos , Diagnóstico por Imagen , Nanomedicina Teranóstica/métodos , Nanopartículas/químicaRESUMEN
Type 2 diabetes mellitus (T2DM) is one of the major public health problems worldwide; both genetic and environmental factors are its risk factors. Arsenic, an environmental pollutant, might be a risk factor for T2DM, but the association of low-to-moderate level arsenic exposure with the risk of T2DM is still inconsistent. Single nucleotide polymorphisms (SNPs) can affect the development of T2DM, but the study on KEAP1 rs11545829 (G>A) SNP is few. In this paper, we explored the effect of KEAP1 rs11545829 (G>A) SNP and low-to-moderate level arsenic exposure on risk of T2DM in a cross-sectional case-control study conducted in Shanxi, China. Total of 938 participants, including 318 T2DM cases and 618 controls, were enrolled. Blood glycosylated haemoglobin (HbA1c) was detected by Automatic Biochemical Analyzer, and participants with HbA1câ§6.5% were diagnosed as T2DM. Urinary total arsenic (tAs, mg/L), as the indicator of arsenic exposure, was detected by liquid chromatography-atomic fluorescence spectrometry (LC-AFS). Genomic DNA was extracted and the genotypes of KEAP1 rs11545829 SNP were examined by multiplex polymerase chain reaction (PCR). The urinary tAs concentration in recruited participants was 0.075 (0.03-0.15) mg/L, and was associated with an increased risk of T2DM (OR = 8.45, 95% CI 2.63-27.17); rs11545829 mutation homozygote AA genotype had a protective effect on risk of T2DM (OR = 0.42, 95 % CI 0.25-0.73). Although this protective effect of AA genotype was found in participants with higher urinary tAs level (>0.032 mg/L) (OR = 0.48, 95% CI 0.26-0.86), there was no interaction effect for arsenic exposure and rs11545829 SNP on risk of T2DM. In addition, BMI modified the association between rs11545829 SNP and the risk of T2DM (RERI = -1.11, 95% CI -2.18-0.04). The present study suggest that low-to-moderate level arsenic exposure may be a risk factor, while KEAP1 rs11545829 SNP mutation homozygote AA genotype may be a protective factor for risk of T2DM, especially for T2DM patients with urinary tAs level>0.032 mg/L.
Asunto(s)
Arsénico , Diabetes Mellitus Tipo 2 , Proteína 1 Asociada A ECH Tipo Kelch , Arsénico/toxicidad , Arsénico/orina , Estudios de Casos y Controles , China/epidemiología , Estudios Transversales , Diabetes Mellitus Tipo 2/epidemiología , Diabetes Mellitus Tipo 2/genética , Predisposición Genética a la Enfermedad , Genotipo , Humanos , Proteína 1 Asociada A ECH Tipo Kelch/genética , Polimorfismo de Nucleótido SimpleRESUMEN
Engineering the structure of core-shell colloidal semiconductor nanoparticles (CSNPs) is attractive due to the potential to enhance photo-induced charge transfer and induce favorable optical and electronic properties. Nonetheless, the sensitivity of telluride CSNPs to high temperatures makes it challenging to precisely modulate their surface crystallinity. Herein, we have developed an efficient strategy for synthesizing telluride CSNPs with thin amorphous shells using aqueous cation exchange (ACE). By changing the synthesis temperature in the range of 40-110 °C, the crystallinity of the CdTe nanoparticles was controllable from perfect crystals with no detectable amorphous shell (c-CdTe) to a core-shell structure with a crystalline CdTe NP core covered by an amorphous shell of tunable thickness up to 7-8 nm (c@a-CdTe). A second ACE step transformed c@a-CdTe to crystalline CdTe@HgTe core-shell NPs. The c@a-CdTe nanoparticles synthesized at 60 °C and having a 4-5 nm thick amorphous shell exhibited the highest surface-enhanced Raman scattering activity with a high enhancement factor around 8.82 × 105, attributed to the coupling between the amorphous shell and the crystalline core.
RESUMEN
To understand the potential roles of terrestrial bamboo on controlling cyanobacterial blooms in aquatic systems, growth rates of the cyanobacterium Microcystis aeruginosa and its competitor algae were examined under different concentrations of bamboo extract. In mono-species cultures with unicellular algal strains, 5.0 g L-1 extract treatment suppressed M. aeruginosa growth, while it had little effect on the growth of green alga Scenedesmus obliquus or promoted the growth of diatom Nitzschia palea. In co-species cultures, the extract treatment increased the effect of S. obliquus and N. palea on the growth of M. aeruginosa. Under the extract treatment with a field-collected M. aeruginosa population, its cell density declined and its colony was etiolated and sank, while co-cultured N. palea increased explosively by invading the colony. These results suggest that bamboo forest stands along banks and artificially installed bamboo poles can affect the aquatic environment for phytoplankton community. Enhancing the growth of competitors, especially diatoms that can invade cyanobacterial colonies, by using extracts or by providing substrates for growth, was suggested to be the major way of the bloom control by bamboo.
Asunto(s)
MicrocystisRESUMEN
Long-term excessive exposure to fluoride from environmental sources can cause serious public health problems such as dental fluorosis and skeletal fluorosis. The aberrant activation of osteoblasts in the early stage is one of the critical steps during the pathogenesis of skeletal fluorosis and canonical Wnt signaling pathway participate in the progress. However, the specific mechanism that how canonical Wnt signaling pathway was mediated is not yet clear. In this study, we found that miR-21-5p induced the activation of canonical Wnt signaling pathway via targeting PTEN and DKK2 during fluoride induced osteoblasts activation and firstly demonstrated the forward loop between canonical Wnt signaling and miR-21-5p in the process. These findings suggested an important regulatory role of miR-21-5p on canonical Wnt signaling pathway during skeletal fluorosis and miR-21-5p might be a potential therapeutic target for skeletal fluorosis.
Asunto(s)
Fluoruros/toxicidad , Péptidos y Proteínas de Señalización Intercelular/metabolismo , MicroARNs/metabolismo , Osteoblastos/efectos de los fármacos , Osteoblastos/metabolismo , Fosfohidrolasa PTEN/metabolismo , Vía de Señalización Wnt , Enfermedades Óseas Metabólicas/metabolismo , Línea Celular , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , HumanosRESUMEN
Intramolecular noncovalent interactions (INIs) have served as a powerful strategy for accessing organic semiconductors with enhanced charge transport properties. Herein, we apply the INI strategy for developing dopant-free hole-transporting materials (HTMs) by constructing two small-molecular HTMs featuring an INI-integrated backbone for high-performance perovskite solar cells (PVSCs). Upon incorporating noncovalent Sâ â â O interaction into their simple-structured backbones, the resulting HTMs, BTORA and BTORCNA, showed self-planarized backbones, tuned energy levels, enhanced thermal properties, appropriate film morphology, and effective defect passivation. More importantly, the high film crystallinity enables the materials with substantial hole mobilities, thus rendering them as promising dopant-free HTMs. Consequently, the BTORCNA-based inverted PVSCs delivered a power conversion efficiency of 21.10 % with encouraging long-term device stability, outperforming the devices based on BTRA without Sâ â â O interaction (18.40 %). This work offers a practical approach to designing charge transporting layers with high intrinsic mobilities for high-performance PVSCs.
RESUMEN
To investigate the potential association between BMP2 single nucleotide polymorphisms (SNPs) and brick-tea-type skeletal fluorosis risk in cross-sectional case-control study conducted in Sinkiang and Qinghai, China, a total of 598 individuals, including 308 Tibetans and 290 Kazakhs, were enrolled. Using the standard WS/192-2008 (China), 221 skeletal fluorosis cases were diagnosed, including 123 Tibetans and 98 Kazakhs. Logistic regressions 2 analysis did not find the association between SNPs (Rs235764, Rs235739 and Rs996544) and skeletal fluorosis. Genetic models, linkage disequilibrium (LD) and haplotype analysis were not found to be associated with risk of skeletal fluorosis after adjustment by age and sex (P>0.05).Our data suggested that Rs 235764, Rs 235739 and Rs 996544 were not linked susceptibility for skeletal fluorosis in our cross-sectional case-control study.
Asunto(s)
Enfermedades Óseas Metabólicas , Proteína Morfogenética Ósea 2/genética , Té/química , Enfermedades Óseas Metabólicas/inducido químicamente , Enfermedades Óseas Metabólicas/genética , Estudios de Casos y Controles , China/epidemiología , Estudios Transversales , Fluoruros/análisis , Fluoruros/toxicidad , Humanos , Polimorfismo de Nucleótido Simple , Tibet/epidemiologíaRESUMEN
We synthesized Au@Cu2-xS core/shell nanorods (NRs) that have synergistic surface plasmon resonance (SPR) effects using a new cation exchange process in ethylene glycol (EG) phase. The dual effect - NIR photothermal and surface positive charge plasmon - of Au@Cu2-xS NRs, promote the capability to degrade Aß1-42 fibrils into amorphous protein.
RESUMEN
Conductive polyelectrolytes such as P3CT-Na have been widely used as efficient hole-transporting layers (HTLs) in inverted perovskite solar cells (PSCs) due to their high hole mobility. However, the acid-base neutralization reaction is indispensable for preparing such polyelectrolytes and the varied content of cations usually leads to poor reproducibility of the device performance in PSCs. In this work, a commercially available polymer poly[3-(4-carboxybutyl)thiophene-2,5-diyl] (P3CT) was directly applied as an HTL in PSCs for the first time. Encouragingly, it was found that due to the dual functionality of carboxyl groups on side chains, a thin layer of P3CT can not only strongly anchor on ITO electrode and optimize its work function but also show an effective passivation effect toward perovskite active layer. Benefiting from such dual functionality, a uniform perovskite film with better quality was obtained on P3CT. As a result, the P3CT-based PSCs show much lower nonradiative recombination and achieve a champion power conversion efficiency (PCE) of 21.33% with a high fill factor (FF) of 83.6%. Impressively, as the device area is increased to 0.80 cm2, a PCE of 19.65% can still be obtained for the PSCs based on P3CT HTL. Our work provides important strategy for developing HTLs for high-performance PSCs.
RESUMEN
n-Type polymers with deep-positioned lowest unoccupied molecular orbital (LUMO) energy levels are essential for enabling n-type organic thin-film transistors (OTFTs) with high stability and n-type organic thermoelectrics (OTEs) with high doping efficiency and promising thermoelectric performance. Bithiophene imide (BTI) and its derivatives have been demonstrated as promising acceptor units for constructing high-performance n-type polymers. However, the electron-rich thiophene moiety in BTI leads to elevated LUMOs for the resultant polymers and hence limits their n-type performance and intrinsic stability. Herein, we addressed this issue by introducing strong electron-withdrawing cyano functionality on BTI and its derivatives. We have successfully overcome the synthetic challenges and developed a series of novel acceptor building blocks, CNI, CNTI, and CNDTI, which show substantially higher electron deficiencies than does BTI. On the basis of these novel building blocks, acceptor-acceptor type homopolymers and copolymers were successfully synthesized and featured greatly suppressed LUMOs (-3.64 to -4.11 eV) versus that (-3.48 eV) of the control polymer PBTI. Their deep-positioned LUMOs resulted in improved stability in OTFTs and more efficient n-doping in OTEs for the corresponding polymers with a highest electrical conductivity of 23.3 S cm-1 and a power factor of â¼10 µW m-1 K-2. The conductivity and power factor are among the highest values reported for solution-processed molecularly n-doped polymers. The new CNI, CNTI, and CNDTI offer a remarkable platform for constructing n-type polymers, and this study demonstrates that cyano-functionalization of BTI is a very effective strategy for developing polymers with deep-lying LUMOs for high-performance n-type organic electronic devices.
RESUMEN
As a key component in perovskite solar cells (PVSCs), hole-transporting materials (HTMs) have been extensively explored and studied. Aiming to meet the requirements for future commercialization of PVSCs, HTMs which can enable excellent device performance with low cost and eco-friendly processability are urgently needed but rarely reported. In this work, a traditional anchoring group (2-cyanoacrylic acid) widely used in molecules for dye-sensitized solar cells is incorporated into donor-acceptor-type HTMs to afford MPA-BT-CA, which enables effective regulation of the frontier molecular orbital energy levels, interfacial modification of an ITO electrode, efficient defect passivation toward the perovskite layer, and more importantly alcohol solubility. Consequently, inverted PVSCs with this low-cost HTM exhibit excellent device performance with a remarkable power conversion efficiency (PCE) of 21.24% and good long-term stability in ambient conditions. More encouragingly, when processing MPA-BT-CA films with the green solvent ethanol, the corresponding PVSCs also deliver a substantial PCE as high as 20.52% with negligible hysteresis. Such molecular design of anchoring group-based materials represents great progress for developing efficient HTMs which combine the advantages of low cost, eco-friendly processability, and high performance. We believe that such design strategy will pave a new path for the exploration of highly efficient HTMs applicable to commercialization of PVSCs.
RESUMEN
Understanding the conformation effect on molecular packing, miscibility, and photovoltaic performance is important to open a new avenue for small-molecule acceptor (SMA) design. Herein, two novel acceptor-(donor-acceptor1-donor)-acceptor (A-DA1D-A)-type asymmetric SMAs are developed, namely C-shaped BDTP-4F and S-shaped BTDTP-4F. The BDTP-4F-based polymer solar cells (PSCs) with PM6 as donor, yields a power conversion efficiency (PCE) of 15.24%, significantly higher than that of the BTDTP-4F-based device (13.12%). The better PCE for BDTP-4F-based device is mainly attributed to more balanced charge transport, weaker bimolecular recombination, and more favorable morphology. Additionally, two traditional A-D-A-type SMAs (IDTP-4F and IDTTP-4F) are also synthesized to investigate the conformation effect on morphology and device performance. Different from the device result above, here, IDTP-4F with S-shape conformation outperforms than IDTTP-4F with C-shape conformation. Importantly, it is found that for these two different types of SMA, the better performing binary blend has similar morphological characteristics. Specifically, both PM6:BDTP-4F and PM6:IDTP-4F blend exhibit perfect nanofibril network structure with proper domain size, obvious face-on orientation and enhance donor-acceptor interactions, thereby better device performance. This work indicates tuning molecular conformation plays pivotal role in morphology and device effciciency, shining a light on the molecular design of the SMAs.
RESUMEN
The change of serum soluble Klotho (sKlotho) content is related to a variety of osteoarthropathy. However, its association with the severity of skeletal fluorosis (SF) is not clear. Here, the association of tea fluoride exposure with serum sKlotho levels and the severity of SF were investigated and further verified in a rat model of fluorosis. A cross sectional case control study was conducted in residents over 50 years old from brick-tea drinking areas in Qinghai and Xinjiang Provinces, China. Concentrations of fluoride in brick tea water and urine were determined by ion selective electrode method, and the levels of serum sKlotho were determined by ELISA method. Linear regression and ordered logistic regression models were constructed to examine the relationship among fluoride exposure, serum sKlotho levels and the severity of SF. The kidney and small intestine of Wistar rats were isolated for detection of Klotho by immunohistochemistry (IHC), and femoral artery blood was sampled to measure the serum levels of sKlotho. An increase of 1 mg/day in tea fluoride intake (TFI) was associated with a 12.070 pg/mL (95% CI: 0.452-23.689) increase in serum sKlotho levels and a 1.163-fold (95% CI: 1.007-1.342) increase in the severity of SF after adjusting for age, gender, and ethnicity. Serum sKlotho levels were also positively associated with the severity of SF (P < 0.05). The mediation analysis showed that serum sKlotho levels mediated 17.76% of the increase in the severity of SF caused by an increase of 1 mg/day of TFI. Moreover, a significant increase of serum sKlotho levels in fluoride-exposed groups was also seen in the rat model. The present study suggests that serum sKlotho may be a potential mediator of SF in brick tea-type fluorosis endemic areas.
Asunto(s)
Fluorosis Dental , Animales , Estudios de Casos y Controles , China , Estudios Transversales , Fluoruros/análisis , Ratas , Ratas Wistar , TéRESUMEN
Fluoride has been considered as a risk factor of cardiovascular disease due to its endothelial toxicology. However, the mechanism underlying the endothelial toxicity of fluoride has not been clearly illustrated. MiR-200c-3p was strongly linked with endothelial function and its level is increased in serum of fluorosis patients, but it is unclear the role of miR-200c-3p in the fluoride induced endothelial dysfunction. In this study, we confirmed that fluoride exposure induced the apoptosis of endothelial cells both in established rats model and cultured human umbilical vein endothelial cells (HUVECs). And miR-200c-3p was found to be upregulated in NaF treated HUVECs. Fluoride stimulation increased caspase-dependent apoptosis through miR-200c-3p upregulation, with repressing expression of its target gene Fas-associated phosphatase 1 (Fap-1), which functioned as Fas inhibitor. This resulted in activation of Fas-associated extrinsic apoptosis via interaction with increased Fas, Fadd, Cleaved Caspase-8 and Cleaved Caspase-3. The activation of Fas-associated extrinsic apoptosis was abrogated by miR-200c-3p inhibitor. Furthermore, the antiapoptotic effect of downregulated miR-200c-3p was restored by Fap-1 siRNA. These results suggested a determinant role of the miR-200c-3p/Fap-1 axis in fluoride induced endothelial apoptosis.