Electrocoagulation using Ti/Ti for the remediation and reuse of aqueous Dispersive Blue-79.

The entire ecology is contaminated by the synthetic dyes that are widely utilised in the textile industries. They can be handled using a variety of technologies, but an eco-friendly method called electrocoagulation has been used to prevent additional contamination. Textile wastewater containing disperse dyes are successfully treated in Electrocoagulation (EC) utilizing Al, Fe, and Stainless Steel (SS), but it is not cost effective, also the treated water contains certain mg/L of the metals used, along with dye components, which obstructs the reuse of the same. The effects of initial pH, applied voltage, dye concentration, supporting electrolyte, and treatment time on the colour removal efficiency (CRE) and consumption of energy were examined in EC process followed by activated charcoal filtration (hybrid process) with a monopolar Ti/Ti electrode on the remediation of aqueous solution of Dispersive Blue-79 (dye 3G). The maximum CREobtained was 99.4%, chemical oxygen demand (COD) 93%, and biological oxygen demand (BOD) 85%, under the following optimized operating conditions, applied voltage 15 V, pH = 7, concentration of dye, electrolyte 110 mg/L, 0.2 g/L and time = 15 min. The overall operating cost for the treatment of aqueous dye 3G was 0.455US/m3. The mechanism of EC was studied using XPS analysis in the sludge obtained. For the purpose of the reuse, FTIR, AAS, and ICP-OES analysis were done and compared with the aqueous dye 3G, after EC and hybrid process to ensure the maximum removal of the degraded dye components and metal. ICP-OES results showed that there were no traces of metal in the treated aqueous dye 3G using this method. Throughout the study, the experimental outcomes indicated that the hybrid process upgraded the quality of the treated aqueous dye 3G.

A sustainable and eco-friendly approach for environmental and energy management using biopolymers chitosan, lignin and cellulose - A review.

Biopolymers are a naturally occurring alternative to synthetic polymers that are linked by covalent bonds, which includes cellular components such as proteins, nucleotides, lipids, and polysaccharides. Based on the extensive literature review it was found that chitosan, lignin, and cellulose were predominantly used in the energy and environmental sectors. Due to their vast array of qualities, including the adsorption, flocculation, anticoagulation, and furthermore, have made them useful for treating wastewater and pollutant removal. Chitosan and lignin have been used as a proton exchange membrane in the energy storage device of fuel cells. As these biopolymers develop strong coordination connections with metal surfaces, they act as an anticorrosive agent, which inhibiting the corrosion. Besides, there are a lot of recent developments in the application of biopolymers for energy and environmental fields. The present review provides a concise summary of recent developments in membrane-based biopolymers role in energy and environmental field. In addition, this review is drawn to a conclusion with a discussion of future trends in the real application of biopolymers in a variety of different industries, as well as the financial significance of these future trends.

Isolation, characterization and optimization of chrysene degradation using bacteria isolated from oil-contaminated water.

Polyaromatic hydrocarbons (PAHs) are uncharged, non-polar molecules generated from natural and anthropogenic activities, where the emissions from anthropogenic activities predominate. Chrysene is a high molecular weight PAH, which is found to be highly recalcitrant and mutagenic in nature. The aim of this study was to isolate chrysene-degrading microorganisms from oil-contaminated water and to enhance their degradative conditions using design expert. From the various samples collected, 19 bacterial strains were obtained through enrichment culture and the one which showed highest activity was identified by 16S rRNA sequencing as Bacillus halotolerans. Under optimum conditions of 100 mg/L chrysene concentration, 1,000 mg/L nitrogen source, and pH 6, B. halotolerans exhibited 90% chrysene degradation on sixth day. Positive results for the enzymes laccase and catechol 1,2 dioxygenase confirmed the ability for chrysene degradation by the isolated strain. Major metabolic intermediate determined in gas chromatography-mass spectrometry (GCMS) analysis was diisooctyl phthalate. Hence it can be concluded that B. halotolerans can be a promising candidate for the removal of high molecular weight (HMW) hydrocarbons from contaminated environments.

Ferulic acid modulates fluoride-induced oxidative hepatotoxicity in male Wistar rats.

The present study is aimed to evaluate the protective effect of ferulic acid (FA) on fluoride-induced oxidative hepatotoxicity in male Wistar rats. Fluoride (25 mg/L) was given orally to induce hepatotoxicity for 12 weeks. Hepatic damage were assessed using status of pathophysiological markers like serum marker enzymes like aspartate transaminase, alanine transaminase, alkaline phosphatase, acid phosphatase, gamma glutamyl transferase, lactate dehydrogenase, bilirubin, lipid profile, total protein content levels, and histopathological studies. Treatment with FA significantly reduced the degree of histological aberrations and rescued lipid peroxidation, as observed from reduced levels of lipid hydroperoxides, nitric oxide, restored levels of enzymic and non-enzymic antioxidants, and total protein content, with a concomitant decline in the levels of marker enzymes and lipid profile in fluoride-induced rats. These results suggest that ferulic acid has the ability to protect fluoride-induced hepatic damage.