Bi-cation incorporated Ni3N nanosheets boost water dissociation kinetics for enhanced alkaline hydrogen evolution activity.

Nickel nitride (Ni3N) is a promising electrocatalyst for the hydrogen evolution reaction (HER) owing to its excellent metallic features and has been demonstrated to exhibit considerable activity for water oxidation. However, its undesirable characteristics as an HER electrocatalyst due to its poor unfavourable d-band energy level significantly limit its water dissociation kinetics. Herein, the HER electrocatalytic activity of Ni3N was prominently enhanced via the simultaneous incorporation of bi-cations (vanadium (V) and iron (Fe), denoted as V-Fe-Ni3N). The optimized V-Fe-Ni3N displays impressive performance with an overpotential of 69 mV at 10 mA cm-2 and good stability in 1.0 M KOH, which is remarkably better than pristine Ni3N, V-doped Ni3N, and Fe-doped Ni3N and considerably closer to a commercial Pt/C catalyst. Based on density functional theory (DFT) studies, V and Fe atoms not only serve as active sites for promoting water dissociation kinetics but also tune the electronic structure of Ni3N to achieve optimized hydrogen adsorption capabilities. This work presents an inclusive understanding of the rational designing of high-performance transition metal nitride-based electrocatalysts for hydrogen production. Its electrocatalytic performance can be significantly enhanced by doping transition metal cations.

Dental Caries and Brushing Techniques Attitude in School Students: An Original Research.

Introduction: Oral health plays an important role in the overall wellness of an individual. Hence in our study, we aim to evaluate the awareness and knowledge about dental caries and pattern of brushing among secondary school students. Materials and Methods: We conducted a questionnaire-based survey among 200 secondary school students to estimate their awareness and knowledge about dental caries and brushing pattern. Only those students with at least one filled, missing, or decayed tooth were considered. The data was presented as percentages. Results: We observed that knowledge regarding dental caries among students was 72.5%. 75.5% students had good knowledge of brushing teeth; nonetheless 30% brushed their teeth twice. Only 21.5% students visited the dental clinic. Conclusion: Though good knowledge about dental caries and brushing was appreciated among the students, very few students practiced good oral hygiene habits. Promotion of oral hygiene habits should be motivated at the school level.

Sequestration of Anionic and Cationic Dyes through Thermally Activated Slate and Their Kinetics and Thermodynamic Characteristics.

Adsorption is one of the most common and most robust techniques for the decontamination approach of effluents, owing to its design flexibility, simplicity, cost effectiveness, and high efficiency. However, its application is limited on a large scale due to its cost. The current study investigates the use of low-cost, ecofriendly, and ubiquitous thermally activated clay material. Thermally treated clay was used for the adsorption of crystal violet (CV), Congo red (CR), and malachite green (MG) organic dyes from aqueous solutions. Characterization of slate was carried out with Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy, X-ray diffraction, N2 physisorption, and XRF spectrometry. The adsorption process was studied as a function of concentration, time, pH, and temperature. Using the batch adsorption technique, the experimentally obtained adsorption data were fitted to both Langmuir and Freundlich isotherms. The adsorption data followed the pseudo-second-order kinetics, and the adsorption capacity was recorded as 360.12 mg/g for CV, 409.23 mg/g for CR, and 390.14 mg/g for MG. The good uptake is the outcome of a greater surface area (24.751 m2/g) for the slate activated at 873 K. The thermodynamic studies showed that the adsorption process remained endothermic and spontaneous. Thermally activated slate proved itself to be an efficient adsorbent and can effectively be used for the removal of textile dyes from the contaminated water, and it is evident from the good uptake of the adsorbate by the adsorbent.

Structural Elucidation, Electronic and Microwave Dielectric Properties of Ca(Sn x Ti1-x )O3, (0 ≤ x ≤ 0.8) Lead-Free Ceramics.

The lead-free Ca(Sn x Ti1-x )O3, (0 ≤ x ≤ 0.8) sample has been successfully prepared through the ball milling process, sintered at 1200 °C for 3 h. The structural, morphological, vibrational, and microwave dielectric properties of synthesized samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and impedance analysis. All the samples have an orthorhombic phase structure with a space group of Pbnm formation, and the crystalline size and strain changes with respect to Sn4+ doping were observed in the XRD analysis. From a morphological point of view, on increasing the content "x", the grain size reduces from 3.29 to 1.37 µm. The existence of vibrations and the bridging stretching mode of Ti-O-Ti and Ti-O-Sn both are associated with the broadband in the region below 800 cm-1 verified by FT-IR. The variation in electrons hopping off the host compound with respect to Sn4+ ions was analyzed in AC conductivity. The changes of dielectric properties such as complex permittivity, modulus spectroscopy, and dielectric loss at room temperature with a different frequency range of 1.00-2.00 GHz are discussed.

An innovative approach towards the simultaneous enhancement of the oxygen reduction and evolution reactions using a redox mediator in polymer based Li-O2 batteries.

For safety concerns, polymer-based Li-O2 batteries have received more attention than traditional non-aqueous Li-O2 batteries. However, poor cycling stability, low round trip efficiency, and over charge potential during cycling are the major shortcomings for their future applications. In this work, a soluble redox mediator integrated into a polymer electrolyte provides immediate access to the solid discharged product, lowering the energy barrier for reversible Li2O2 generation and disintegration. Moreover, introducing a redox mediator to the polymer electrolyte boosts the ORR during discharge and the OER during the recharge process. The synergistic redox mediator pBQ (1,4 benzoquinone) dramatically reduces the over-potential. A small proportion of pBQ in the polymer electrolyte allows Li2O2 to develop in a thin film-like morphology on the cathode surface, resulting in a high reversible capacity of ∼12 000 mA h g-1 and an extended cycling stability of 100 cycles at 200 mA g-1 with a cut-off capacity of 1000 mA h g-1. The remarkable cell performance is attributed to the fast kinetics of para benzoquinone for the ORR and OER in Li-O2 batteries. The use of a redox mediator in a polymer electrolyte opens a new avenue for practical Li-O2 battery applications in achieving low charge potential and excellent energy efficiency.

The Effect of Ca Dopant on the Electrical and Dielectric Properties of BaTi4O9 Sintered Ceramics.

The current research examines the impact of Ca2+ substitution on the phase and electrical properties of (Ba1-xCax)Ti4O9, (x = 0.0, 0.3, 0.6, and 0.9) sintered pellets synthesized by solid-state reaction method. The as-synthesized samples were analyzed using X-ray diffraction (XRD) and impedance spectroscopy. The emergence of orthorhombic phase fit into space group Pnmm was revealed by XRD, and the addition of Ca resulted in a considerable shift in grain size. Dielectric properties were determined using an impedance spectroscopy in a wide frequency range from 1MHz to 3 GHz. The dielectric properties i.e., dielectric constant (εr) and dielectric loss (tanσ), were measured at 3 GHz frequency. The frequency-dependent parameters such as conductivity, dielectric constant, and dielectric loss indicated that the relaxation process is a Maxwell-Wagner type of interfacial polarization. The improved dielectric properties and low energy loss have made (Ba1-xCax)Ti4O9 a prominent energy storage material. This study provides the possibility to improve its dielectric properties and reduce energy loss, making it an excellent energy storage material.

Growth and Investigation of Annealing Effects on Ternary Cd1-xMgxO Nanocomposit Thin Films.

Thin films of Cd1-xMgxO (CdMgO) (0 ≤ x ≤ 1) were investigated by depositing the films on glass substrates using the co-evaporation technique. The structural, surface morphological, optical, and electrical characteristics of these films were studied as a function of Mg content after annealing at 350 °C. The XRD analysis showed that the deposited films had an amorphous nature. The grain size of the films reduced as the Mg concentration increased, as evidenced by the surface morphology, and EDAX supported the existence of Mg content. It was observed that as the films were annealed, the transmittance of the CdMgO films saw an increase of up to 85%. The blue shift of the absorption edge was observed by the increase of Mg content, which was useful for enhancing the efficiency of solar cells. The optical band gap increased from 2.45 to 6.02 eV as the Mg content increased. With increased Mg content, the refractive index reduced from 2.49 to 1.735, and electrical resistivity increased from 535 Ω cm to 1.57 × 106 Ω cm.