Application of frass from black soldier fly larvae treatment of cattle dung in pulp and papermaking.

Cattle dung treatments in Taiwan have developed a process called Black soldier fly larvae (BSFL) treatment, which can digest cow dung and generate the frass (larvae drops), the residue fiber in cow dung. This study aims to assess frass for its potential in pulp and papermaking, considering its chemical compositions, appearance, and fiber morphology, and also evaluate its suitability for pulping by soda method to create added value. The frass exhibits favorable material properties for pulping and papermaking, including a high holocellulose (67.37%) and α-cellulose (48.00%) content, along with a lower ash content (4.61%); the microstructure and surface mesoporous pores benefit for pulping; and the nonwood-fiber-like fiber morphology. The pulping experiment shows that 7% NaOH and 75 min of pulping conditions result in proper disintegration of fiber, and the highest accepts ratio (34.06%). The NaOH causes fiber disintegration during pulping, resulting in a higher strength property of the handsheet. The frass pulp blended with TOCC can achieve the ring crush index standards required for cardboard products. In summary, the frass from BSFL treatment of cattle dung can be utilized in pulp and papermaking to enhance circular utilization value.

Circular utilization of discarded oyster farming bamboo scaffolding in pulp and papermaking.

Oyster Farming is one of important fisheries and aquaculture industries in Taiwan. Each year, approximately 4000-5000 tons of discarded bamboo scaffolding (BS) used in oyster farming, are generated, so the treatment and utilization of BS should be taken seriously. This study evaluates the suitability of BS for pulp and papermaking by assessing the chemical compositions, microstructural, and fiber morphology. The pulping properties is investigated by soda pulping. The chemical composition of BS shows the potential for application in pulping. The BS microstructure shows that can enhance pulping reactions, while the fiber morphology indicates the possibility of producing high-strength paper. Through the pulping experiment, it demonstrated that BS is suitable for pulping with lower NaOH dosage and longer digestion time. The condition at 170 °C with 14% NaOH dosage for 90 min digestion has the highest yield. After refining the highest pulping yield BS pulp, it can improve the handsheet strength and bulk of the OCC-BS mixed pulp, which can achieve the strength property required for industrial paper. In summary, BS exhibits the potential for pulping application and produces a better paper strength than OCC pulp, exhibiting the feasibility of enhancing the circular utilization value of BS in Taiwan.

Development of bio-mechanical rice straw pulp by high consistency kneader with thermal and Alkaline.

The purpose of this study was to develop a bio-mechanical pulp from rice straw with thermal and low chemical dosage. The process is carried out by thermal alkali kneading pretreatment (0-5% NaOH) with a high concentration kneader, enzyme pretreatment (0.2-4%) and Hollander beater. The results showed that the addition of NaOH was the main factor affecting the properties of pulp and paper, and the best properties of straw pulp could be obtained when NaOH and enzyme dosage were 5% and 0.2%, respectively. Although the optimum rice straw pulp is inferior to straw soda pulp in terms of tensile, burst and ring crush index, it is superior to old corrugated cardboard pulp and partially meets the CNS standards of corrugated medium paper and linerboard without the addition of chemicals. Therefore, the bio-mechanical rice straw pulp in this study has the potential to be produced as industrial paper.

The Impact of Spring Festival Travel on Epidemic Spreading in China.

The large population movement during the Spring Festival travel in China can considerably accelerate the spread of epidemics, especially after the relaxation of strict control measures against COVID-19. This study aims to assess the impact of population migration in Spring Festival holiday on epidemic spread under different scenarios. Using inter-city population movement data, we construct the population flow network during the non-holiday time as well as the Spring Festival holiday. We build a large-scale metapopulation model to simulate the epidemic spread among 371 Chinese cities. We analyze the impact of Spring Festival travel on the peak timing and peak magnitude nationally and in each city. Assuming an R0 (basic reproduction number) of 15 and the initial conditions as the reported COVID-19 infections on 17 December 2022, model simulations indicate that the Spring Festival travel can substantially increase the national peak magnitude of infection. The infection peaks arrive at most cities 1-4 days earlier as compared to those of the non-holiday time. While peak infections in certain large cities, such as Beijing and Shanghai, are decreased due to the massive migration of people to smaller cities during the pre-Spring Festival period, peak infections increase significantly in small- or medium-sized cities. For a less transmissible disease (R0 = 5), infection peaks in large cities are delayed until after the Spring Festival. Small- or medium-sized cities may experience a larger infection due to the large-scale population migration from metropolitan areas. The increased disease burden may impose considerable strain on the healthcare systems in these resource-limited areas. For a less transmissible disease, particular attention needs to be paid to outbreaks in large cities when people resume work after holidays.

Feasibility of substituting old corrugated carton pulp with thermal alkali and enzyme pretreated semichemical mechanical rice straw pulp.

In this study, we separately used a laboratory Hollander beater, a pilot scale 12″ single-disc refiner and an expanded trial with a commercial paper mold mill to investigate the feasibility of using thermal-alkali/enzyme pretreated rice straw semi-chemical mechanical pulp to substitute portions of old corrugated carton board (OCC) pulp in the paper industry. In the laboratory plan, sequential treatments of NaOH at a 5-10% dosage and enzymes at a 0.2-4% dosage were applied to rice straw, followed by beating using a Hollander beater for 1-2 h to complete the rice straw semi-chemical mechanical pulping process. When the NaOH dosage, enzyme dosage and refining time were 10%, 0.2% and 1 h, the best quality rice straw pulp was obtained. Along with the increase in NaOH dosage, the pulp freeness decreased significantly, and the pulp accepted rate increased. Enzymatic treatment enhanced rice straw quality only after NaOH dosage treatment, which then reacted with rice straw to increase the quality of pulp. In the expanded trial, the rice straw semi-chemical mechanical pulp was blended with OCC pulp (0%, 25%, 50%, 75% and 100%) to form handsheets. Along with an increase in rice straw proportions, the tensile index, burst index, and ring-crush index increased by 109-200%, 13-196%, and 124-187%, respectively. In an online commercial paper mold mill trial, blending rice straw pulp with OCC could successfully make paper-mold egg cartons, with both mill operation and product smoothness appearance being highly acceptable.

Mitigating COVID-19 Transmission in Schools With Digital Contact Tracing.

Precision mitigation of COVID-19 is in pressing need for postpandemic time with the absence of pharmaceutical interventions. In this study, the effectiveness and cost of digital contact tracing (DCT) technology-based on-campus mitigation strategy are studied through epidemic simulations using high-resolution empirical contact networks of teachers and students. Compared with traditional class, grade, and school closure strategies, the DCT-based strategy offers a practical yet much more efficient way of mitigating COVID-19 spreading in the crowded campus. Specifically, the strategy based on DCT can achieve the same level of disease control as rigid school suspensions but with significantly fewer students quarantined. We further explore the necessary conditions to ensure the effectiveness of DCT-based strategy and auxiliary strategies to enhance mitigation effectiveness and make the following recommendation: social distancing should be implemented along with DCT, the adoption rate of DCT devices should be assured, and swift virus tests should be carried out to discover asymptomatic infections and stop their subsequent transmissions. We also argue that primary schools have higher disease transmission risks than high schools and, thereby, should be alerted when considering reopenings.