Rational Design of Nitride Phosphor-In-Glass with Robust Stability and Photoluminescence Performance.

Phosphor-in-glass represents a promising avenue for merging the luminous efficiency of high-quality phosphor and the thermal stability of a glass matrix. Undoubtedly, the glass matrix system and its preparation are pivotal factors in achieving high stability and preserving the original performance of embedded phosphor particles. In contrast to the well-established commercial Y3Al5O12:Ce3+ oxide phosphor, red nitride phosphor, which plays a critical role in high-quality lighting, exhibits greater structural instability during the high-temperature synthesis of inorganic glasses. A telluride glass with a refractive index (RI = 2.15@615 nm) akin to that of nitride phosphor (∼2.19) has been devised, demonstrating high efficiency in photon utilization. The lower glass-transition temperature plays a crucial role in safeguarding phosphor particles against erosion resulting from exposure to high-temperature melts. Phosphor-in-glass retains 93% of the quantum efficiency observed for pure phosphor. The assembled white light-emitting diodes module has precise color tuning capabilities, achieving an optimal color rendering index of 93.7, a luminous efficacy of 80.4 lm/W, and a correlated color temperature of 5850 K. These outcomes hold potential for advancing the realm of inorganic package and high-quality white light illumination.

Ti─O─C Bonding at 2D Heterointerfaces of 3D Composites for Fast Sodium Ion Storage at High Mass Loading Level.

3D composite electrodes have shown extraordinary promise as high mass loading electrode materials for sodium ion batteries (SIBs). However, they usually show poor rate performance due to the sluggish Na+ kinetics at the heterointerfaces of the composites. Here, a 3D MXene-reduced holey graphene oxide (MXene-RHGO) composite electrode with Ti─O─C bonding at 2D heterointerfaces of MXene and RHGO is developed. Density functional theory (DFT) calculations reveal the built-in electric fields (BIEFs) are enhanced by the formation of bridged interfacial Ti─O─C bonding, that lead to not only faster diffusion of Na+ at the heterointerfaces but also faster adsorption and migration of Na+ on the MXene surfaces. As a result, the 3D composite electrodes show impressive properties for fast Na+ storage. Under high current density of 10 mA cm-2, the 3D MXene-RHGO composite electrodes with high mass loading of 10 mg cm-2 achieve a strikingly high and stable areal capacity of 3 mAh cm-2, which is same as commercial LIBs and greatly exceeds that of most reported SIBs electrode materials. The work shows that rationally designed bonding at the heterointerfaces represents an effective strategy for promoting high mass loading 3D composites electrode materials forward toward practical SIBs applications.

Mapping knowledge of the stem cell in traumatic brain injury: a bibliometric and visualized analysis.

Background: Traumatic brain injury (TBI) is a brain function injury caused by external mechanical injury. Primary and secondary injuries cause neurological deficits that mature brain tissue cannot repair itself. Stem cells can self-renewal and differentiate, the research of stem cells in the pathogenesis and treatment of TBI has made significant progress in recent years. However, numerous articles must be summarized to analyze hot spots and predict trends. This study aims to provide a panorama of knowledge and research hotspots through bibliometrics. Method: We searched in the Web of Science Core Collection (WoSCC) database to identify articles pertaining to TBI and stem cells published between 2000 and 2022. Visualization knowledge maps, including co-authorship, co-citation, and co-occurrence analysis were generated by VOSviewer, CiteSpace, and the R package "bibliometrix." Results: We retrieved a total of 459 articles from 45 countries. The United States and China contributed the majority of publications. The number of publications related to TBI and stem cells is increasing yearly. Tianjin Medical University was the most prolific institution, and Professor Charles S. Cox, Jr. from the University of Texas Health Science Center at Houston was the most influential author. The Journal of Neurotrauma has published the most research articles on TBI and stem cells. Based on the burst references, "immunomodulation," "TBI," and "cellular therapy" have been regarded as research hotspots in the field. The keywords co-occurrence analysis revealed that "exosomes," "neuroinflammation," and "microglia" were essential research directions in the future. Conclusion: Research on TBI and stem cells has shown a rapid growth trend in recent years. Existing studies mainly focus on the activation mechanism of endogenous neural stem cells and how to make exogenous stem cell therapy more effective. The combination with bioengineering technology is the trend in this field. Topics related to exosomes and immune regulation may be the future focus of TBI and stem cell research.

Rational ligand design for enhanced carrier mobility in self-powered SWIR photodiodes based on colloidal InSb quantum dots.

Solution-processed colloidal III-V semiconductor quantum dot photodiodes (QPDs) have potential applications in short-wavelength infrared (SWIR) imaging due to their tunable spectral response range, possible multiple-exciton generation, operation at 0-V bias voltage and low-cost fabrication and are also expected to replace lead- and mercury-based counterparts that are hampered by reliance on restricted elements (RoHS). However, the use of III-V CQDs as photoactive layers in SWIR optoelectronic applications is still a challenge because of underdeveloped ligand engineering for improving the in-plane conductivity of the QD assembled films. Here, we report on ligand engineering of InSb CQDs to enhance the optical response performance of self-powered SWIR QPDs. Specifically, by replacing the conventional ligand (i.e., oleylamine) with sulfide, the interparticle distance between the CQDs was shortened from 5.0 ± 0.5 nm to 1.5 ± 0.5 nm, leading to improved carrier mobility for high photoresponse speed to SWIR light. Furthermore, the use of sulfide ligands resulted in a low dark current density (∼nA cm-2) with an improved EQE of 18.5%, suggesting their potential use in toxic-based infrared image sensors.

Quercetin as a promising intervention for rat osteoarthritis by decreasing M1-polarized macrophages via blocking the TRPV1-mediated P2X7/NLRP3 signaling pathway.

Osteoarthritis (OA) is characterized by an imbalance between M1 and M2 polarized synovial macrophages. Quercetin has shown protective effects against OA by altering M1/M2-polarized macrophages, but the underlying mechanisms remain unclear. In this study, rat chondrocytes were treated with 10 ng/mL of IL-1ß. To create M1-polarized macrophages in vitro, rat bone marrow-derived macrophages (rBMDMs) were treated with 100 ng/mL LPS. To mimic OA conditions observed in vivo, a co-culture system of chondrocytes and macrophages was established. ATP release assays, immunofluorescence assays, Fluo-4 AM staining, Transwell assays, ELISA assays, and flow cytometry were performed. Male adult Sprague-Dawley (SD) rats were used to create an OA model. Histological analyses, including H&E, and safranin O-fast green staining were performed. Our data showed a quercetin-mediated suppression of calcium ion influx and ATP release, with concurrent downregulation of TRPV1 and P2X7 in the chondrocytes treated with IL-1ß. Activation of TRPV1 abolished the quercetin-mediated effects on calcium ion influx and ATP release in chondrocytes treated with IL-1ß. In the co-culture system, overexpression of P2X7 in macrophages attenuated the quercetin-mediated effects on M1 polarization, migration, and inflammation. Either P2X7 or NLRP3 knockdown attenuated IL-1ß-induced M1/M2 polarization, migration, and inflammation. Moreover, overexpression of TRPV1 reduced the quercetin-mediated suppressive effects on OA by promoting M1/M2-polarized macrophages in vivo. Collectively, our data showed that quercetin-induced suppression of TRPV1 leads to a delay in OA progression by shifting the macrophage polarization from M1 to M2 subtypes via modulation of the P2X7/NLRP3 pathway.

Comparative Analysis of the Efficacy of Spinal Cord Stimulation and Traditional Debridement Care in the Treatment of Ischemic Diabetic Foot Ulcers: A Retrospective Cohort Study.

BACKGROUND AND OBJECTIVES: Spinal cord stimulation (SCS) is an effective treatment for diabetic peripheral neuropathy. The purpose of this study was to investigate the effectiveness of SCS in the treatment of ischemic diabetic foot ulcers. METHODS: In this retrospective study, the SCS group comprised 102 patients with ischemic diabetic foot who were treated with SCS for foot ulcers and nonhealing wounds due to severe lower limb ischemia. The traditional debridement care (TDC) group comprised 104 patients with ischemic diabetic foot who received only TDC. Strict screening criteria were applied. The assignment of patients to either group depended solely on their willingness to be treated with SCS. Secondary end points were transcutaneous partial pressure of oxygen (PtcO2), ankle-brachial index (ABI), and color Doppler of the lower limb arteries in the feet at 6 months and 12 months after treatment. The primary end point was the amputation. RESULTS: The dorsal foot PtcO2 and ABI of the patients in the SCS group were significantly improved at 6 months and 12 months postoperation (P < .05). The therapeutic efficacy was significantly better than that of the TDC group over the same period of time (P < .05). The degree of vasodilation of the lower limb arteries (ie, femoral, popliteal, posterior tibial, and dorsalis pedis arteries) on color Doppler was higher in the SCS group than in the TDC group (P < .05). The odds ratios for total amputation at 6 and 12 months postoperatively in the SCS group were 0.45 (95% CI, 0.19-1.08) and 0.17 (95% CI, 0.08-0.37), respectively, compared with the TDC group. CONCLUSION: SCS improved symptoms of lower limb ischemia in ischemic diabetic feet and reduced the rate of toe amputation by increasing PtcO2, ABI, and arterial vasodilation in the lower limbs.

Enhanced osteogenicity of the demineralized bone-dermal matrix composite by the optimal partial demineralization for sustained release of bioactive molecules.

Allogenic demineralized bone matrix (DBM), processed to expose bioactive proteins imbedded by calcium salts, is widely used for bone repair and regeneration as an alternative to the autologous bone graft. However, demineralized bone matrices from tissue banks vary significantly in residual calcium content and osteogenicity for clinical bone regeneration. The present study produced DBM with various residual calcium contents by partial demineralization using ethylenediaminetetraacetic acid disodium (EDTA) and hydrochloric acid. Compositional analysis reveals that, as the percent weight loss of bone materials increases from 0% to 74.9% during demineralization, the residual calcium content of DBM decreases from 24.8% to 0.2% and collagen content increases from 29.7% to 92.6%. Calorimetrical analysis and Fourier transform infrared (FTIR) analysis demonstrated that demineralization to the residual calcium content of <4% enables the complete exposure and/or release of bone collagen fibers and other bioactive molecules. In order to evaluate the relationship between the extent of demineralization and the osteogenicity of DBM, DBM particles were fabricated with the aid of acellular dermal matrix (ADM) microfibers to form flexible foam-like DBM/ADM composites. Proteomic analysis identified various type collagens and bone formation-related bioactive molecules in both ADM and DBM. Using the rat bilateral Φ = 5 mm calvarium defect repair model, the study had shown that the DBM/ADM composite with ~20% DBM residual calcium (e.g., ~40% calcium being removed) maximized the osteogenicity for bone defect repair after 4 and 8 weeks. DBM with ~40% calcium removal had the maximal osteogenicity presumably through the sustained release of bioactive molecules during the process of bone regeneration.

Exploring gene-patient association to identify personalized cancer driver genes by linear neighborhood propagation.

BACKGROUND: Driver genes play a vital role in the development of cancer. Identifying driver genes is critical for diagnosing and understanding cancer. However, challenges remain in identifying personalized driver genes due to tumor heterogeneity of cancer. Although many computational methods have been developed to solve this problem, few efforts have been undertaken to explore gene-patient associations to identify personalized driver genes. RESULTS: Here we propose a method called LPDriver to identify personalized cancer driver genes by employing linear neighborhood propagation model on individual genetic data. LPDriver builds personalized gene network based on the genetic data of individual patients, extracts the gene-patient associations from the bipartite graph of the personalized gene network and utilizes a linear neighborhood propagation model to mine gene-patient associations to detect personalized driver genes. The experimental results demonstrate that as compared to the existing methods, our method shows competitive performance and can predict cancer driver genes in a more accurate way. Furthermore, these results also show that besides revealing novel driver genes that have been reported to be related with cancer, LPDriver is also able to identify personalized cancer driver genes for individual patients by their network characteristics even if the mutation data of genes are hidden. CONCLUSIONS: LPDriver can provide an effective approach to predict personalized cancer driver genes, which could promote the diagnosis and treatment of cancer. The source code and data are freely available at https://github.com/hyr0771/LPDriver .

Transmembrane serine protease 6, a novel target for inhibition of neuronal tumor growth.

Transmembrane serine protease 6 (Tmprss6) has been correlated with the occurrence and progression of tumors, but any specific molecular mechanism linking the enzyme to oncogenesis has remained elusive thus far. In the present study, we found that Tmprss6 markedly inhibited mouse neuroblastoma N2a (neuro-2a) cell proliferation and tumor growth in nude mice. Tmprss6 inhibits Smad1/5/8 phosphorylation by cleaving the bone morphogenetic protein (BMP) co-receptor, hemojuvelin (HJV). Ordinarily, phosphorylated Smad1/5/8 binds to Smad4 for nuclear translocation, which stimulates the expression of hepcidin, ultimately decreasing the export of iron through ferroportin 1 (FPN1). The decrease in cellular iron levels in neuro-2a cells with elevated Tmprss6 expression limited the availability of the metal forribo nucleotide reductase activity, thereby arresting the cell cycle prior to S phase. Interestingly, Smad4 promoted nuclear translocation of activating transcription factor 3 (ATF3) to activate the p38 mitogen-activated protein kinases signaling pathway by binding to ATF3, inducing apoptosis of neuro-2a cells and inhibiting tumor growth. Disruption of ATF3 expression significantly decreased apoptosis in Tmprss6 overexpressed neuro-2a cells. Our study describes a mechanism whereby Tmprss6 regulates the cell cycle and apoptosis. Thus, we propose Tmprss6 as a candidate target for inhibiting neuronal tumor growth.

Interpeduncular cistern intrathecal targeted drug delivery for intractable postherpetic neuralgia: A case report.

BACKGROUND: Intractable postherpetic neuralgia (PHN) can be difficult to manage even with aggressive multimodal therapies. Patients who experience uncontrolled refractory cranial PHN despite conservative treatment may benefit from an intrathecal drug delivery system (IDDS). For craniofacial neuropathic pain, the traditional approach has been to place the intrathecal catheter tip below the level of the cranial nerve root entry zones, which may lead to insufficient analgesia. CASE SUMMARY: We describe a 69-year-old man with a 1-year history of PHN after developing a vesicular rash in the ophthalmic division of cranial nerve V (trigeminal nerve) distribution. The pain was rated 7-8 at rest and 9-10 at breakthrough pain (BTP) on a numeric rating scale. Despite receiving aggressive multimodal therapies including large doses of oral analgesics (gabapentin 150 mg q12 h, oxycodone 5 mg/acetaminophen 325 mg q6 h, and lidocaine 5% patch 700 mg q12 h) and sphenopalatine ganglion block, there was no relief of pain. Subsequently, the patient elected to have an implantable IDDS with the catheter tip placed at the interpeduncular cistern. The frequency of BTP episodes decreased. The patient's continuous daily dose was adjusted to 0.032 mg/d after 3 mo of follow-up and stopped 5 mo later. He did not report pain or other discomfort at outpatient follow-up 6 mo and 1 year after stopping intracisternal hydromorphone. CONCLUSION: The use of interpeduncular cistern intrathecal infusion with low-dose hydromorphone by IDDS may be effective for severe craniofacial PHN.

Highly efficient, self-powered UV photodiodes based on leadfree perovskite nanocrystals through interfacial engineering.

Double perovskite crystals are promising alternatives for lead-based perovskites that has potential to address toxicity and instability issues. In this study, Cs2AgBiCl6nanocrystals (NCs) with high absorption coefficients were synthesized by hot-injection method. The bandgap engineering was realized by tuning the halide composition in Cs2AgBiCl6to Cs2AgBiBr6. Both NCs were used as light-absorbing layers in lead-free perovskite photodiodes that exhibit wavelength-selectivity for UV-visible light operatable even at a bias voltage of 0 V. Cs2AgBiBr6-based photodiode exhibits a characteristic detection peak at 340 nm with a responsivity of 3.21 mA W-1, a specific detectivity up to 8.91 × 1010Jones and a fast response speed with a rise/fall time of 30/35 ms. The excellent performance of self-driven photodiodes lights up the prospect of lead-free perovskite NCs in highly efficient optoelectronic devices.

Versatile potassium vanadium fluorophosphate (KVPO4F) composites as Dual-Function cathode and anode materials for Potassium-Ion hybrid capacitors.

Potassium-based energy storage has emerged as a promising alternative for advanced energy storage systems, driven by the abundance of potassium, fast ion migration, and low standard electrode potential. Hybrid capacitors, which combine the desirable characteristics of batteries and supercapacitors, offer a compelling solution for efficient energy storage. In this study, we present the development of versatile composite materials, specifically potassium vanadium fluorophosphate (KVPO4F) composites, utilizing a sol-gel method. These composites enable tunable potassium storage and charge transport kinetics within regulated voltage windows, serving as both cathode and anode materials. The anode composite, composed of KVPO4F and hierarchical porous carbon (HPC), exhibited exceptional stability over 400 cycles within a low-voltage window. On the other hand, the cathode composite, consisting of battery-like KVPO4F and physisorption activated carbon (AC), demonstrated great potential as a cathode material, striking a balance between specific energy and cycle life within a regulated high-voltage window. By integrating KVPO4F/C as the anode and KVPO4F/AC as the cathode, we successfully created potassium-ion hybrid capacitors (PIHCs) that showcased an impressive capacity retention of 83% after 10,000 cycles within a high voltage window of 0.5-4.3 V. Furthermore, to explore the application of these materials in miniaturized energy storage, we fabricated potassium-ion micro hybrid capacitors (PIMHCs) with interdigitated electrodes. These devices exhibited a high areal energy density of 18.8 µWh cm-2 at a power density of 111.6 µW cm-2, indicating their potential for compact energy storage systems. The results of this study demonstrate the versatility and efficacy of the developed KVPO4F composite materials, highlighting their potential for future advancements in potassium-based energy storage technologies.