Broadband and fabrication-tolerant 3-dB couplers with topological valley edge modes.

3-dB couplers, which are commonly used in photonic integrated circuits for on-chip information processing, precision measurement, and quantum computing, face challenges in achieving robust performance due to their limited 3-dB bandwidths and sensitivity to fabrication errors. To address this, we introduce topological physics to nanophotonics, developing a framework for topological 3-dB couplers. These couplers exhibit broad working wavelength range and robustness against fabrication dimensional errors. By leveraging valley-Hall topology and mirror symmetry, the photonic-crystal-slab couplers achieve ideal 3-dB splitting characterized by a wavelength-insensitive scattering matrix. Tolerance analysis confirms the superiority on broad bandwidth of 48 nm and robust splitting against dimensional errors of 20 nm. We further propose a topological interferometer for on-chip distance measurement, which also exhibits robustness against dimensional errors. This extension of topological principles to the fields of interferometers, may open up new possibilities for constructing robust wavelength division multiplexing, temperature-drift-insensitive sensing, and optical coherence tomography applications.

Cation Triggered Self-Assembly of α-Lactalbumin Nanotubes.

Metal ions play a dual role in biological systems. Although they actively participate in vital life processes, they may contribute to protein aggregation and misfolding and thus contribute to development of diseases and other pathologies. In nanofabrication, metal ions mediate the formation of nanostructures with diverse properties. Here, we investigated the self-assembly of α-lactalbumin into nanotubes induced by coordination with metal ions, screened among the series Mn2+, Co2+, Ni2+, Zn2+, Cd2+, and Au3+. Our results revealed that the affinity of metal ions toward hydrolyzed α-lactalbumin peptides not only impacts the kinetics of nanotube formation but also influences their length and rigidity. These findings expand our understanding of supramolecular assembly processes in protein-based materials and pave the way for designing novel materials such as metallogels in biochip and biosensor applications.

Versatile Mechanically Tunable Hydrogels for Therapeutic Delivery Applications.

Hydrogels provide a versatile platform for biomedical material fabrication that can be structurally and mechanically fine-tuned to various tissues and applications. Applications of hydrogels in biomedicine range from highly dynamic injectable hydrogels that can flow through syringe needles and maintain or recover their structure after extrusion to solid-like wound-healing patches that need to be stretchable while providing a selective physical barrier. In this study, a toolbox is designed using thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) polymeric matrices and nanocelluloses as reinforcing agent to obtain biocompatible hydrogels with altering mechanical properties, from a liquid injectable to a solid-like elastic hydrogel. The liquid hydrogels possess low viscosity and shear-thinning properties at 25 °C, which allows facile injection at room temperature, while they become viscoelastic gels at body temperature. In contrast, the covalently cross-linked solid-like hydrogels exhibit enhanced viscoelasticity. The liquid hydrogels are biocompatible and are able to delay the in vitro release and maintain the bioactivity of model drugs. The antimicrobial agent loaded solid-like hydrogels are effective against typical wound-associated pathogens. This work presents a simple method of tuning hydrogel mechanical strength to easily adapt to applications in different soft tissues and broaden the potential of renewable bio-nanoparticles in hybrid biomaterials with controlled drug release capabilities.

The mechanism and kinetics of the atmospheric oxidation of CF3(CF2)2CHCH2 (HFC-1447fz) by hydroxyl radicals: ab initio investigation.

The oxidation of 3,3,4,4,5,5,5-heptafluoro-1-pentene (HFC-1447fz) by hydroxyl radicals plays a crucial role in atmospheric conditions. By employing the CCSD(T)/cc-pVTZ//M06-2X/6-311++G(d,p) level of theory, the detailed reaction mechanism, kinetics and atmospheric implications of the degradation of HFC-1447fz by hydroxyl radicals were investigated. Compared to H-abstraction channels, the OH addition reaction is determined to be more favorable initial pathways in the degradation processes of HFC-1447fz. The overall rate coefficient of the degradation of HFC-1447fz by OH radicals is estimated to be 1.66 × 10-12 cm3 molecule-1 s-1 and the lifetime of HFC-1447fz is found to be 7 days at 298 K, which are in good agreement with the reported experimental results. The global warming potential (GWP) for HFC-1447fz on the 50, 100 and 500-year time horizons is estimated using the calculated rate coefficient. Furthermore, the mechanisms of the subsequent reactions of two OH-addition adducts have also been investigated. By TD-DFT calculations, it was found that eleven species can undergo photodissociation, while ten other species are photolytically stable under sunlight.

Species-Level Monitoring of Key Bacteria in Fermentation Processes Using Single-Nucleotide Resolved Nucleic Acid Assays Based on CRISPR/Cas12.

Microorganisms can determine the flavor and quality of fermented food, such as Baijiu, which is produced via Daqu fermentation. Therefore, monitoring key microorganisms during fermentation is important for ensuring high-quality fermented food. Here, we report a single-nucleotide resolved nucleic acid assay based on the CRISPR/Cas12 system, enabling the quantification of Bacillus amyloliquefaciens, a key microorganism in Daqu fermentation at the species level. The assay employs an amplification-refractory mutation system derived from PCR to analyze minor genetic differences between different Bacillus species. The utilization of CRISPR/Cas12 further guaranties the specificity of identifying the PCR amplicon and enables the quantification of Bacillus amyloliquefaciens via end-measurement fluorescence. Compared to conventional qPCR, the assay allows for species-level detection of bacteria, thus enabling the precise detection of the Bacillus strain that yields high-level 2,3,5,6-tetramethylpyrazine. The assay promises the precise monitoring of bacterial growth and contribution to flavor during Daqu fermentation, thus facilitating fermented food quality control.

Ultrabroadband and compact 2 × 2 3-dB coupler based on trapezoidal subwavelength gratings.

We propose and experimentally demonstrate an ultrabroadband and compact 2 × 2 3-dB coupler based on the trapezoidal subwavelength gratings (SWGs). The adiabatic coupling is achieved between a trapezoidal SWG waveguide and a reversely tapered strip waveguide, which contributes to the ultrabroad operation bandwidth and the compact footprint of the coupler. Numerical results prove that our device has a power splitting imbalance of < ± 0.5 dB and an excess loss of < 0.2 dB in the ultrabroad bandwidth of 300 nm from 1400 nm to 1700nm, with a coupling length of 4.4 µm and a total length of 24.4 µm. The fabricated device is characterized in a 270-nm bandwidth from 1400 nm to 1670 nm, showing a measured power splitting imbalance of < ± 0.7 dB and an excess loss of < 0.5 dB.

Highly Adhesive Amyloid-Polyphenol Hydrogels for Cell Scaffolding.

Rationally designing microstructures of soft hydrogels for specific biological functionalization is a challenge in tissue engineering applications. A novel and affordable soft hydrogel scaffold is constructed here by incorporating polyphenol modules with lysozyme amyloid fibrils (Lys AFs) via non-covalent self-assembly. Embedded polyphenols not only trigger hydrogel formation but also determine gel behavior by regulating the polyphenol gallol density and complex ratio. The feasibility of using a polyphenol-Lys AF hydrogel as a biocompatible cell scaffold, which is conducive to cell proliferation and spreading, is also shown. Notably, introducing polyphenols imparts the corresponding hydrogels a superior cell bioadhesive efficiency without further biofunctional decoration and thus may be successfully employed in both healthy and cancer cell lines. Confocal laser scanning microscopy also reveals that the highly expressed integrin-mediated focal adhesions form due to stimulation of the polyphenol-AF composite hydrogel, direct cell adhesion, proliferation, and spreading. Overall, this work constitutes a significant step forward in creating highly adhesive tissue culture platforms for in vitro culture of different cell types and may greatly expand prospects for future biomaterial design and development.

Polymer induced liquid crystal phase behavior of cellulose nanocrystal dispersions.

Cellulose nanocrystals (CNCs) are a promising bio-based material that has attracted significant attention in the fabrication of functional hybrid materials. The rod-like shape and negative surface charge of CNCs enable their rich colloidal behavior, such as a liquid crystalline phase and hydrogel formation that can be mediated by different additives. This study investigates the effect of depletion-induced attraction in the presence of non-absorbing polyethylene glycol (PEG) of different molecular weights in CNC aqueous dispersions, where the polymer molecules deplete the space around particles, apply osmotic pressure and drive the phase transition. Polarized light microscopy (PLM), rheology, small angle X-ray scattering (SAXS) and atomic force microscopy (AFM) are used to characterize the phase behavior over a time period of one month. In our results, pure CNC dispersion shows three typical liquid crystal shear rheology regimes and cholesteric self-assembly behavior. Tactoid nucleation, growth and coalescence are observed microscopically, and eventually the dispersion presents macroscopic phase separation. PEG with lower molecular weight induces weak attractive depletion forces. Tactoid growth is limited, and the whole system turns into a fully nematic phase macroscopically. With PEG of higher molecular weight, attractive depletion force becomes predominant, thus CNC self-assembly is inhibited and nematic hydrogel formation is triggered. Overall, we demonstrate that depletion induced attraction forces by the addition of PEG enable precise tuning of CNC self-assembly and phase behavior with controllable mechanical strength and optical activity. These findings deepen our fundamental understanding of cellulose nanocrystals and advance their application in colloidal systems and nanomaterials.

The Mechanism and Kinetics Model of Degradation of Dicarboxylic Acids by Hydroxyl Radicals under Atmospheric Conditions.

The atmospheric degradation mechanism of dicarboxylic acids (DCAs) initiated by hydroxyl radicals has been theoretically investigated at the DLPNO-CCSD(T)/def2-TZVP//BH&HLYP/6-311++G(d,p) level of theory. In the presence of O2, the degradation of DCAs by hydroxyl radicals takes place through a two-step mechanism: the α-H elimination and the degradation of the peroxyl radical intermediate. The latter degradation mechanism is easy to proceed for the exothermic process of radical recombination. Therefore, the degradation rate of DCAs is determined by an α-H elimination step, which is accelerated in the case of long carbon-chain DCAs with a lower energy barrier. Canonical variational transition state theory has been employed to estimate the rate constants of the H-elimination step of the DCA degradation reaction by hydroxyl radicals over the temperature range of 220-1000 K.

[Microbial Diversity and Influencing Factors in a Small Watershed in Winter].

The water quality of a small watershed will directly affect the water quality safety of the entire watershed. The Lidu small watershed of the Fulin District in Chongqing was selected for this study. The characteristics of runoff and the microbial community in the receiving water body were analyzed by high-throughput sequencing technology. The effects of the physical and chemical factors of the water body on the microbial diversity in the water body were also investigated. The results showed that the small watershed of Lidu was an important source of nitrite and dissolved organic carbon for the receiving water. There was no significant difference in the microbial richness and diversity of the water flowing through different pollution sources in the small watershed, and the microbial diversity index was negatively correlated with the total phosphorus (r -0.79--0.84, P ≤ 0.01) and phosphate (r -0.71--0.80, P ≤ 0.01) of the water. At the phylum level, Actinobacteria (37.33% ±14.69%) accounted for the largest proportion of runoff flowing through the agricultural area, followed by Proteobacteria (32.53% ±7.18%), Cyanobacteria (14.65% ±22.64%), Bacteroidetes (8.50% ±3.67%), and others. Proteobacteria (43.67% ±10.80%) accounted for the largest proportion of runoff flowing through the industrial area, followed by Bacteroidetes (25.33% ±11.97%), Actinobacteria (24.17% ±14.66%), Firmicutes (2.53% ±0.72%), and others. At the genus level, hgcI_clade (19.08% ±13.46%) accounted for the largest proportion of runoff flowing through the agricultural area, followed by CL 500-29 _marine_group (7.40% ±4.44%), Limnohabitans (7.05% ±3.14%), and others. Flavobacterium (20.40% ±12.37%) accounted for the largest proportion of runoff flowing through the industrial area, followed by hgcI_clade (15.30% ±11.11%), Acinetobacter (9.33% ±11.50%), and others. The Flavobacterium in the runoff water may be related to the input of industrial sources in the watershed. Nitrous nitrogen, total phosphorus, phosphate, pH, and Zn2+ were the main environmental factors that affected the microbial community in the small watershed. They can explain the variance of microbial community 0.26, 0.21, 0.20, 0.15, and 0.14, respectively. DOC, nitrate nitrogen, and heavy metal ions such as Cu2+, Zn2+, Mn2+, and As3+ were also related to the proportion of some microorganisms in the water.

Adsorption of charged anisotropic nanoparticles at oil-water interfaces.

The adsorption of nanoparticles at fluid interfaces is of profound importance in the field of nanotechnology. Recent developments aim at pushing the boundaries beyond spherical model particles towards more complex shapes and surface chemistries, with particular interest in particles of biological origin. Here, we report on the adsorption of charged, shape-anisotropic cellulose nanocrystals (CNCs) for a wide range of oils with varying chemical structure and polarity. CNC adsorption was found to be independent of the chain length of aliphatic n-alkanes, but strongly dependent on oil polarity. Surface pressures decreased for more polar oils due to lower particle adsorption energies. Nanoparticles were increasingly wetted by polar oils, and interparticle Coulomb interactions across the oil phase thus increase in importance. No surface pressure was measurable and the O/W emulsification capacity ceased for the most polar octanol, suggesting limited CNC adsorption. Further, salt-induced charge screening enhanced CNC adsorption and surface coverage due to lower interparticle and particle-interface electrostatic repulsion. An empiric power law is presented which predicts the induced surface pressure of charged nanoparticles based on the specific oil-water interface tension.

Identification and Quantification of Nitrogen in a Reservoir, Jiaodong Peninsula, China.

Identification of nitrogen (N) sources is important in water quality control and management. Nitrogen pollution can lead to eutrophication of waterbodies and high concentrations of nitrate in drinking water can pose potential health problems. The 15N isotope and nitrogen fluxes budget approach is useful for determining the source of to surface waters. In this study, mass balance and 15N isotope approaches and nitrogen flux budgets were applied to identify total nitrogen (TN) sources and nitrogen transformation processes in the Menlou Reservoir (MR), Jiaodong Peninsula, China. The different fractions of nitrogen and their 15N isotope signatures were analyzed in the reservoir water, river water, groundwater, soil, and atmospheric precipitation. The results indicate that surface runoff pollution (e.g., fertilizer and animal manure) is the main source of in MR. High concentrations of TN in MR are caused by low nitrogen self-purification (denitrification) rate, low sediment adsorption capacity, and the influx of rich groundwater.

Use of bauxite residue (red mud) as a low cost sorbent for sulfide removal in polluted water remediation.

Sulfide is an important pollutant in aqueous systems. Sulfide removal from polluted waters is required prior to discharge. Red mud (RM) is a solid waste of bauxite processing that is rich in reactive iron oxides and consequently has the potential to be used to remove sulfide from aqueous systems. A series of experiments was undertaken using raw and sintered RM to remove sulfide from waters. RM was highly efficient at sulfide removal (average 75% sulfide removal at initial concentration of ∼5 mg L(-1), with 500 mg L(-1) RM addition) due to both physical adsorption (high specific area) and chemical reaction (with amorphous Fe). Sintered RM, which has a lower surface area and lower mineral reactivity, was much less efficient at removing sulfide (∼20% removal under equivalent experimental conditions). Furthermore, concomitant metal release from raw RM was lower than for sintered RM during the sulfide removal process. The results showed that raw RM is a potentially suitable material for sulfide removal from polluted waters and consequently could be used as a low cost alternative treatment in certain engineering applications.

Dynamic characteristics of sulfur, iron and phosphorus in coastal polluted sediments, north China.

The cycling of sulfur (S), iron (Fe) and phosphorus (P) in sediments and pore water can impact the water quality of overlying water. In a heavily polluted river estuary (Yantai, China), vertical profiles of fluxes of dissolved sulfide, Fe2+ and dissolved reactive phosphorus (DRP) in sediment pore water were investigated by the Diffusive Gradients in Thin films technique (DGT). Vertical fluxes of S, Fe, P in intertidal sediment showed the availability of DRP increased while the sulfide decreased with depth in surface sediment, indicating that sulfide accumulation could enhance P release in anoxic sediment. In sites with contrasting salinity, the relative dominance of iron and sulfate reduction was different, with iron reduction dominant over sulfate reduction in the upper sediment at an intertidal site but the reverse true in a freshwater site, with the other process dominating at depth in each case. Phosphate release was largely controlled by iron reduction.

Reduced inorganic sulfur in surface sediment and its impact on benthic environments in offshore areas of NE China.

Geochemical cycling and biological toxicity of sulfur in marine sediments is closely related to the activity of organisms. This study investigated the distribution and potential impact on benthic environments of acid volatile sulfur (AVS), chromium(II)-reducible sulfur (CRS), elemental sulfur (ES), total S, C, N and Fe in superficial sediments across the Bohai Sea, Yellow Sea and East China Sea. The composition of reduced inorganic sulfur in the three study areas was dominated by CRS (averaging 72% of total reduced inorganic sulfur). The low AVS content (average of 1.12 µmol g(-1)) of the sediments and the low values of AVS/CRS (average 0.34 µmol g(-1)), degree of pyritization and degree of sulphidization indicate that there is sufficient available iron in the sediment to restrict the threat of sulphide toxicity to benthic organisms in most of the study areas. However, high organic matter loads in parts of the study areas have resulted in enhanced accumulation of AVS, resulting in a higher toxicity risk.