MXene@Hydrogel composite nanofibers with the photo-stimulus response and optical monitoring functions for on-demand drug release.

The photo-stimulus response has the advantage of non-invasiveness, which could be used to control the "on" and "off" of drug release achieving on-demand release. Herein, we design a heating electrospray during electrospinning to prepare photo-stimulus response composite nanofibers consisting of MXene@Hydrogel. This heating electrospray enables to spray MXene@Hydrogel during the electrospinning process, and the hydrogel is uniformly distributed which cannot be achieved by the traditional soaking method. In addition, this heating electrospray can also overcome the difficulty that hydrogels are hard to be uniformly distributed in the inner fiber membrane.The "on" and "off" state of drug release could be controlled by light. Not only near infrared (NIR) light but also sunlight could trigger the drug release, which could benefit outdoor use when cannot find NIR light. Evidence by hydrogen bond has been formed between MXene and Hydrogel, the mechanical property of MXene@Hydrogel composite nanofibers is significantly enhanced, which is conducive to the application of human joints and other parts that need to move. These nanofibers also possess fluorescence property, which is further used to real-time monitor the in-vivo drug release. No matter the fast or slow release, this nanofiber can achieve sensitive detection, which is superior to the current absorbance spectrum method.

Icy core-shell composite nanofibers with cooling, antibacterial and healing properties for outdoor burns.

Burns are usually difficult to treat because their susceptibe to bacterial infections. When burns is accompanied by hyperthermia, the heat accumulated on the skin will causes extensive tissue damage. Most dressings focus on the treatment process, while ignoring the first-aid treatment to remove hyperthermia. To make matters worse, when outdoors, it is hard to find clean water to wash and cool the burned area. A dressing which can simultaneously realize first-time cooling and repairing treatment of the burned area can shorten treatment time, and is especially beneficial for outdoor use. In this study, a handheld coaxial electrospinning device is developed for preparing platelet-rich plasma @Polycaprolactone-epsilon polylysine (PRP@PCL/ε-PL) core-shell nanofibers. The nanofibers can be synchronously transformed into ice fibers during the spinning process, and directly deposited on the skin. The whole process is convenient to use outdoor. Via dual cooling mechanisms, first aid can take away the excessive heat in the burn area by nanofibers. These core-shell nanofibers also show its excellent antimicrobial and tissue regeneration-promoting properties. Therefore, it achieves first-time cooling and repair treatment of the burned area at the same time. Moreover, due to direct in-situ deposition of this handheld coaxial electrospinning, better antimicrobial properties, and faster healing performance are achieved. By using this integrated strategy that combines cooling, antibacterial and healing promotion, the burn recovery time is shortened from 21 days to 14 days.

Cool and hot chitosan/platelet-derived growth factor nanofibers for outdoors burns.

Burns and scalds are thermal injuries caused by a large amount of heat accumulation in local tissues. The first cooling emergency is a key step. However, it is hard that in outdoors to find clean water to cool the scald tissue sites. Moreover, most dressings are concentrated on the treatment process today, neglecting the emergency treatment of temperature reduction. In this study, we imported refrigeration in the electrospinning process while using dirty water, rainwater and even urine of outdoors, so that the cooled sterile fibers were directly deposited on the burn and scald wounds, and the cooling emergency was achieved through the dual cooling mechanism. Since this fiber which is made up of cheap fish gelatin contains CuS adopting the green method, it can generate heat and effectively kill bacteria under the irradiation of an illumination lamp at the front end of a spinning device. As a result of the direct deposition, there is an excellent fit between the fibrous membrane and the skin, which reduces the air gap to achieve a better and quick cooling and heating effects. On the same Chitosan/Platelet-derived Growth Factor fiber membrane, this method of cooling first and heating second can shorten the recovery time from 30 days to 21 days. Thus, this treatment strategy has a great potential application prospect in the field of outdoor burn treatment.

A nanofiber hydrogel derived entirely from ocean biomass for wound healing.

Crustaceans and fish scales in the marine food industry are basically thrown away as waste. This not only wastes resources but also causes environmental pollution. While reducing pollution and waste, biological activity and storage of materials are urgent issues to be solved. In this study, by first preparing dry fibers and then making hydrogels, we prepared a fish scale/sodium alginate/chitosan nanofiber hydrogel (FS-P) by cross-linking the nanofibers in situ. From fish and other organisms, fish gelatin (FG), collagen and CaCO3 were extracted. Fish scale (FS)/sodium alginate/chitosan nanofibers were cross-linked with copper sulfide nanoparticles prepared by a one-step green method to obtain FS-P nanofiber hydrogels under mild conditions without catalyst and additional procedures. These fiber hydrogels not only have good tissue adhesion and tensile properties, but also have the antibacterial effect of natural antibacterial and CuS photothermal synergism, which can achieve 51.32% and 49.96% of the antibacterial effect against Staphylococcus aureus and Escherichia coli respectively, avoiding the generation of superbacteria. The nanofiber hydrogels have 87.56% voidage and 52.68% degradability after 14 days. The combined strategy of using marine bio-based fibers to prepare gels promoted angiogenesis and tissue repair.

Synergistic antibacterial polyacrylonitrile/gelatin nanofibers coated with metal-organic frameworks for accelerating wound repair.

Bacterial infections prolong the wound healing time and increase the suffering of patients, thus it is important to develop wound dressing that can inhibit bacterial infection. Herein, we use two methods including "doping method" and "secondary growth method" to prepare ZIF-8@gentamicin embedded in and coated on polyacrylonitrile/gelatin (PG) nanofibers, separately. Composite nanofibers prepared by the secondary growth method achieve higher drug loading than that of the doping method, and the release rate can be adjusted by pH. Simultaneously increasing drug loading and regulating its release rate are achieved in the secondary growth method, which cannot be achieved by the doping method. Furthermore, synergistic antibacterial property occurs in the composite nanofibers prepared by the secondary growth method, and gentamicin loaded on ZIF-8 promotes the antibacterial effect, which shows better antibacterial effect than the doping method. As a result, during the wound infection of mouse, composite nanofibers prepared by the secondary growth method exhibit a faster recovery effect than the doping method, which effectively shortened the wound healing time from 21 days to 16 days.

Effects of Tianmagouteng particles on brain cognitive function in spontaneously hypertensive rats with hyperactivity of liver-yang: A [F-18] FDG micro-PET imaging study.

OBJECTIVE: To collect visualized proof of Tianmagouteng particles (TMGTP) in alleviating cognitive dysfunction and to explore its effects on brain activity in spontaneously hypertensive rats (SHRs) with hyperactivity of liver-yang (Gan Yang Shang Kang, GYSK). METHODS: Sixteen SHRs were randomized into treatment group and non-treatment. The SHR with GYSK was induced by gavaging aconite decoction (10mL/kg at 0.2g/mL). After the SHR models were prepared, the rats in the treatment group were administered TMGTP (10mL/kg) once a day for 14days.The rats in the non-treatment group or normal rats (control group) received an equivalent volume of saline. Morris water maze test was conducted before and after the treatment to observe cognitive function. Fluorine 18-deoxy glucose [F-18]FDG micro-PET brain imaging scans was performed after treatment. Data were analyzed with two-sample t-test (P<0. 001) using SPM2 image analysis software. RESULTS: Compared with the non-treatment group, the escape latency significantly decreased but the frequency of entrance into the target zone significantly increased in the treatment group. Consistent with the alteration of cognitive functions, TMGTP induced strong brain activity in the following sites: right dorsolateral nucleus and ventrolateral nucleus of thalamus, amygdala, left met thalamus, cerebellum leaflets, original crack, front cone crack, loop-shaped leaflets; but deactivation of right medial frontal gyrus, bilateral corpus callosum, hippocampus, and left dentate gyrus. CONCLUSION: TMGTP could alleviate cognitive dysfunction in SHRs with GYSK, which was possibly by inducing alteration of glucose metabolism in different brain regions with corresponding functions.