Chemical fixation of atmospheric CO2 in tricopper(II)-carbonato complexes with tetradentate N-donor ligands: reactive intermediates, probable mechanisms, and catalytic and magneto-structural studies.

In the present era, the fixation of atmospheric CO2 is of significant importance and plays a crucial role in maintaining the balance of carbon and energy flow within ecosystems. Generally, CO2 fixation is carried out by autotrophic organisms; however, the scientific community has paid substantial attention to execute this process in laboratory. In this report, we synthesized two carbonato-bridged trinuclear copper(II) complexes, [Cu3(L1)3(µ3-CO3)](ClO4)3 (1) and [Cu3(L2)3(µ3-CO3)](ClO4)3 (2) via atmospheric fixation of CO2 starting with Cu(ClO4)2·6H2O and easily accessible pyridine/pyrazine-based N4 donor Schiff base ligands L1 and L2, respectively. Under very similar reaction conditions, the ligand framework embedded with the phenolate moiety (HL3) fails to do so because of the reduction of the Lewis acidity of the metal center, inhibiting the formation of a reactive hydroxide bound copper(II) species, which is required for the fixation of atmospheric CO2. X-ray crystal structures display that carbonate-oxygen atoms bridge three copper(II) centers in µ3syn-anti disposition in 1 and 2, whereas [Cu(HL3)(ClO4)] (3) is a mononuclear complex. Interestingly, we also isolated an important intermediate of atmospheric CO2 fixation and structurally characterized it as an anti-anti µ2 carbonato-bridged dinuclear copper(II) complex, [Cu2(L2)2(µ2-CO3)](ClO4)2·MeOH (2-I), providing an in-depth understanding of CO2 fixation in these systems. Variable temperature magnetic susceptibility measurement suggests ferromagnetic interactions between the metal centers in both 1 and 2, and the results have been further supported by DFT calculations. The catalytic efficiency of our synthesized complexes 1-3 was checked by means of catechol oxidase and phenoxazinone synthase-like activities. While complexes 1 and 2 showed oxidase-like activity for aerobic oxidation of o-aminophenol and 3,5-di-tert-butylcatechol, complex 3 was found to be feebly active. ESI mass spectrometry revealed that the oxidation reaction proceeds through the formation of complex-substrate intermediations and was further substantiated by DFT calculations. Moreover, active catalysts 1 and 2 were effectively utilized for the base-free oxidation of benzylic alcohols in the presence of air as a green and sustainable oxidant and catalytic amount of TEMPO in acetonitrile. Various substituted benzylic alcohols smoothly converted to their corresponding aldehydes under very mild conditions and ambient temperature. The present catalytic protocol showcases its environmental sustainability by producing minimal waste.

Spin Crossover in [Fe(qsal-5-Brq)2]+ Complexes with a Quinoline-Substituted Qsal Ligand.

Using a quinoline substituted Qsal ligand, Hqsal-5-Brq (Hqsal-5-Brq = N-(5-bromo-8-quinolyl)salicylaldimine), four FeIII complexes, [Fe(qsal-5-Brq)2]A·CH3OH (Y = NO3- (1NO3), BF4- (2BF4), PF6- (3PF6), OTf- (4OTf), were prepared and characterized. Structure analysis revealed that complex 2BF4 contained two species (2BF4(P1̅) and 2BF4(C2/c)). In these compounds except 3PF6, the [Fe(qsal-5-Brq)2]+ cations form 1D chains through π-π interactions and other weak interactions. Adjacent chains are connected to form the 2D "Chain Layer" structures and 3D structures through various supramolecular interactions. For 3PF6, a "Dimer Chain" structure is formed from the loosely connected dimers. Magnetic studies revealed that compounds 1NO3 and 2BF4(P1̅) displayed abrupt hysteretic SCO with the transition temperature T1/2↓ = 235 K, T1/2↑ = 240 K for 1NO3 and T1/2↓ = 230 K, T1/2↑ = 235 K for 2BF4(P1̅), while compounds 3PF6 and 4OTf are in the HS state. Desolvation of the complexes significantly modifies their SCO properties: the desolvated 1NO3 and 2BF4 show a gradual SCO, desolvated 3PF6 undergoes a two-step SCO, and desolvated 4OTf exhibits a hysteretic transition. Overall, this work reported the FeIII-SCO complexes of the quinoline-substituted Hqsal ligand and highlighted the potential of these ligands for the development of interesting FeIII-SCO materials.

Regiodivergent Hydrosilylation of Polar Enynes to Synthesize Site-Specific Silyl-Substituted Dienes.

Herein, we present catalyst-regulated switchable site-selective hydrosilylation of enynes, which are suitable for a wide range of alkyl and aryl substituted polar enynes and exhibit excellent functional group compatibility. Under the optimized conditions, silyl groups can be precisely installed at various positions of 1,3-dienes. While α- and γ-silylation products were obtained under platinum-catalytic systems, ß-silylation products were delivered with [Cp*RuCl]4 as catalyst. This process lead to the formation of 1,3-dienoates with diverse substitutions, which would pose challenges with other methodologies.

Mechanosensitive protein polycystin-1 promotes periosteal stem/progenitor cells osteochondral differentiation in fracture healing.

Background: Mechanical forces are indispensable for bone healing, disruption of which is recognized as a contributing cause to nonunion or delayed union. However, the underlying mechanism of mechanical regulation of fracture healing is elusive. Methods: We used the lineage-tracing mouse model, conditional knockout depletion mouse model, hindlimb unloading model and single-cell RNA sequencing to analyze the crucial roles of mechanosensitive protein polycystin-1 (PC1, Pkd1) promotes periosteal stem/progenitor cells (PSPCs) osteochondral differentiation in fracture healing. Results: Our results showed that cathepsin (Ctsk)-positive PSPCs are fracture-responsive and mechanosensitive and can differentiate into osteoblasts and chondrocytes during fracture repair. We found that polycystin-1 declines markedly in PSPCs with mechanical unloading while increasing in response to mechanical stimulus. Mice with conditional depletion of Pkd1 in Ctsk+ PSPCs show impaired osteochondrogenesis, reduced cortical bone formation, delayed fracture healing, and diminished responsiveness to mechanical unloading. Mechanistically, PC1 facilitates nuclear translocation of transcriptional coactivator TAZ via PC1 C-terminal tail cleavage, enhancing osteochondral differentiation potential of PSPCs. Pharmacological intervention of the PC1-TAZ axis and promotion of TAZ nuclear translocation using Zinc01442821 enhances fracture healing and alleviates delayed union or nonunion induced by mechanical unloading. Conclusion: Our study reveals that Ctsk+ PSPCs within the callus can sense mechanical forces through the PC1-TAZ axis, targeting which represents great therapeutic potential for delayed fracture union or nonunion.

Nitrogen Forms Regulate the Response of Microcystis aeruginosa to Nanoplastics at Environmentally Relevant Nitrogen Concentrations.

As essential primary producers, cyanobacteria play a major role in global carbon and nitrogen cycles. Though the influence of nanoplastics on the carbon metabolism of cyanobacteria is well-studied, little is known about how nanoplastics affect their nitrogen metabolism, especially under environmentally relevant nitrogen concentrations. Here, we show that nitrogen forms regulated growth inhibition, nitrogen consumption, and the synthesis and release of microcystin (MC) in Microcystis aeruginosa exposed to 10 µg/mL amino-modified polystyrene nanoplastics (PS-NH2) with a particle size of 50 nm under environmentally relevant nitrogen concentrations of nitrate, ammonium, and urea. We demonstrate that PS-NH2 inhibit M. aeruginosa differently in nitrate, urea, and ammonium, with inhibition rates of 51.87, 39.70, and 36.69%, respectively. It is caused through the differences in impairing cell membrane integrity, disrupting redox homeostasis, and varying nitrogen transport pathways under different nitrogen forms. M. aeruginosa respond to exposure of PS-NH2 by utilizing additional nitrogen to boost the production of amino acids, thereby enhancing the synthesis of MC, extracellular polymeric substances, and membrane phospholipids. Our results found that the threat of nanoplastics on primary producers can be regulated by the nitrogen forms in freshwater ecosystems, contributing to a better understanding of nanoplastic risks under environmentally relevant conditions.

Age-related secretion of grancalcin by macrophages induces skeletal stem/progenitor cell senescence during fracture healing.

Skeletal stem/progenitor cell (SSPC) senescence is a major cause of decreased bone regenerative potential with aging, but the causes of SSPC senescence remain unclear. In this study, we revealed that macrophages in calluses secrete prosenescent factors, including grancalcin (GCA), during aging, which triggers SSPC senescence and impairs fracture healing. Local injection of human rGCA in young mice induced SSPC senescence and delayed fracture repair. Genetic deletion of Gca in monocytes/macrophages was sufficient to rejuvenate fracture repair in aged mice and alleviate SSPC senescence. Mechanistically, GCA binds to the plexin-B2 receptor and activates Arg2-mediated mitochondrial dysfunction, resulting in cellular senescence. Depletion of Plxnb2 in SSPCs impaired fracture healing. Administration of GCA-neutralizing antibody enhanced fracture healing in aged mice. Thus, our study revealed that senescent macrophages within calluses secrete GCA to trigger SSPC secondary senescence, and GCA neutralization represents a promising therapy for nonunion or delayed union in elderly individuals.

A dry polymer nanocomposite transcutaneous electrode for functional electrical stimulation.

BACKGROUND: Functional electrical stimulation (FES) can be used in rehabilitation to aid or improve function in people with paralysis. In clinical settings, it is common practice to use transcutaneous electrodes to apply the electrical stimulation, since they are non-invasive, and can be easily applied and repositioned as necessary. However, the current electrode options available for transcutaneous FES are limited and can have practical disadvantages, such as the need for a wet interface with the skin for better comfort and performance. Hence, we were motivated to develop a dry stimulation electrode which could perform equivalently or better than existing commercially available options. METHODS: We manufactured a thin-film dry polymer nanocomposite electrode, characterized it, and tested its performance for stimulation purposes with thirteen healthy individuals. We compared its functionality in terms of stimulation-induced muscle torque and comfort level against two other types of transcutaneous electrodes: self-adhesive hydrogel and carbon rubber. Each electrode type was also tested using three different stimulators and different intensity levels of stimulation. RESULTS: We found the proposed dry polymer nanocomposite electrode to be functional for stimulation, as there was no statistically significant difference between its performance to the other standard electrodes. Namely, the proposed dry electrode had comparable muscle torque generated and comfort level as the self-adhesive hydrogel and carbon rubber electrodes. From all combinations of electrode type and stimulators tested, the dry polymer nanocomposite electrode with the MyndSearch stimulator had the most comfortable average rating. CONCLUSIONS: The dry polymer nanocomposite electrode is a durable and flexible alternative to existing self-adhesive hydrogel and carbon rubber electrodes, which can be used without the addition of a wet interfacing agent (i.e., water or gel) to perform as well as the current electrodes used for stimulation purposes.

4D printed origami-inspired accordion, Kresling and Yoshimura tubes.

Applying tessellated origami patterns to the design of mechanical materials can enhance properties such as strength-to-weight ratio and impact absorption ability. Another advantage is the predictability of the deformation mechanics since origami materials typically deform through the folding and unfolding of their creases. This work focuses on creating 4D printed flexible tubular origami based on three different origami patterns: the accordion, the Kresling and the Yoshimura origami patterns, fabricated with a flexible polylactic acid (PLA) filament with heat-activated shape memory effect. The shape memory characteristics of the self-unfolding structures were then harnessed at 60°C, 75°C and 90°C. Due to differences in the folding patterns of each origami design, significant differences in behaviour were observed during shape programming and actuation. Among the three patterns, the accordion proved to be the most effective for actuation as the overall structure can be compressed following the folding crease lines. In comparison, the Kresling pattern exhibited cracking at crease locations during deformation, while the Yoshimura pattern buckled and did not fold as expected at the crease lines. To demonstrate a potential application, an accordion-patterned origami 4D printed tube for use in hand rehabilitation devices was designed and tested as a proof-of-concept prototype incorporating self-unfolding origami.

Hysteretic Spin Crossover with High Transition Temperatures in Two Cobalt(II) Complexes.

Cooperative spin crossover transitions with thermal hysteresis loops are rarely observed in cobalt(II) complexes. Herein, two new mononuclear cobalt(II) complexes with hysteretic spin crossover at relatively high temperatures (from 320 to 400 K), namely, [Co(terpy-CH2OH)2]·X2 (terpy-CH2OH = 4'-(hydroxymethyl)-2,2';6',2″-terpyridine, X = SCN-(1) and SeCN- (2)), have been synthesized and characterized structurally and magnetically. Both compounds are mononuclear CoII complexes with two chelating terpy-CH2OH ligands. Magnetic measurements revealed the existence of the hysteretic SCO transitions for both complexes. For compound 1, a one-step transition with T1/2↑= 334.5 K was observed upon heating, while a two-step transition is observed upon cooling with T1/2↓(1) = 329.3 K and T1/2↓(2) = 324.1 K (at a temperature sweep rate of 5 K/min). As for compound 2, a hysteresis loop with a width of 5 K (T1/2↓ = 391.6 K and T1/2↑ = 396.6 K, at a sweep rate of 5 K/min) can be observed. Thanks to the absence of the crystallized lattice solvents, their single crystals are stable enough at high temperatures for the structure determination at both spin states, which reveals that the hysteretic SCO transitions in both complexes originate from the crystallographic phase transitions involving a thermally induced order-disorder transition of the dangling -CH2OH groups in the ligand. This work shows that the modification of the terpy ligand has an important effect on the magnetic properties of the resulting cobalt(II) complexes.

Fusarium pernambucanum Causing Leaf Yellow Spot on Melon (Cucumis melo L.), a New Disease in China.

Melon (Cucumis melo L.) is a member of the Cucurbitaceae family, and is an important economic and horticultural crop. In March 2022, melon plants in greenhouses exhibited severe leaf yellow spot symptoms in Changjiang County (109°13'N, 19°28'E), Hainan Province. The incidence of the disease was about 30-50%. Lesions initially appeared as yellow dots on leaves and expanded irregularly. Gradually, brown spots appeared, and finally the whole leaves turned yellow and resulted in blighting and death of foliage (Figure 1.). A total of four symptomatic plants were sampled from about 0.2 ha of an area. Symptomatic leaves were excised, surface disinfected with 2% (w/v) NaOCl, rinsed three times with sterile distilled water, and placed on potato dextrose agar (PDA) followed by incubation at 25°C in the dark for 5 days. The pure cultures were obtained by the hyphal-tip method. A total of eight fungal isolates with similar colony characteristics were recovered from the four symptomatic plants. Three DNA fragments (ITS, TEF1, and RPB2) of the eight isolates showed 100% sequence identity based on the molecular identification methods described below. Therefore, one of the isolates, M2JP-3, was chosen for identification and test of the pathogenicity. The colony of M2JP-3 on PDA at 25°C for 5 days was white with yellow-brown pigmentation in the center (Figure 2A-B). From 10-day-old cultures grown on CLA (Fisher et al. 1982), macroconidia (n = 50) were falcate, slender, curved dorsiventrally, tapering towards both ends, 3 to 7 septate, and measured 24.5 to 52.1 x 3.7 to 4.7 µm. The microconidia (n = 50) were straight or slightly curved, septate 0 to 2, and measured 9.9 to 16.3 x 2.5 to 3.7 µm (Figure 2C-E). For molecular identification, genomic DNA was extracted using the method previously described (Khan et al. 2021),the internal transcribed spacer (ITS), translation elongation factor 1α (TEF1) and DNA-dependent RNA polymerase subunit II (RPB2) were amplified, respectively, using primers ITS1/ITS4 (White et al. 1990), EF1/ EF2 (O'Donnell et al. 1998), and 5F2/7cR (Reeb et al. 2004). The 529 bp (ITS), 723 bp (TEF1), and 965bp (RPB2) sequences were deposited in GenBank with acce. nos. OP303211, OP312675 and OP312674, respectively. A phylogenetic tree was constructed using the concatenated three gene sequences of M2JP-3 and that of the Fusarium incarnatum-equiseti species complex (FIESC) (Xia et al. 2019) based on Maximum Likelihood (Figure 3). M2JP-3 was grouped together with the F. pernambucanum strain NRRL 32864 (accession no. GQ505702 for ITS, GQ505613 for TEF1and GQ505791 for RPB2), and shared 100% concatenated sequence identity. For pathogenicity tests of M2JP-3, seeds of melon cultivar Jinmeiren were surface disinfected and sowed in soil in three replicated pots in a greenhouse at 26 °C under natural light. Healthy leaves of the melon plants were wounded with needles and inoculated with mycelial plugs of M2JP-3 or PDA plugs as control. . Symptoms similar to the original greenhouse symptoms were observed at 7 days after inoculation (Figure 4). The control leaves were asymptomatic. The same fungus was reisolated from the inoculated leaves, as identified based on morphology and molecular evidence, which confirmed the Kochs' postulates. To our knowledge, this is the first time Fusarium pernambucanum has been recorded causing leaf yellow spot disease on melon. Further, findings of the present study will help to develop effective disease management strategies against Fusarium pernambucanum Leaf Yellow Spot on melon in China.

In Situ Probing of the Intrinsic Adhesion Strength of Single Anaerobic Microbial Cells.

Probing the single-cell mechanobiology in situ is imperative for microbial processes in the medical, industrial, and agricultural realms, but it remains a challenge. Herein, we present a single-cell force microscopy method that can be used to measure microbial adhesion strength under anaerobic conditions in situ. This method integrates atomic force microscopy with an anaerobic liquid cell and inverted fluorescence microscopy. We obtained the nanomechanical measurements of the single anaerobic bacterium Ethanoligenens harbinense YUAN-3 and the methanogenic archaeon Methanosarcina acetivorans C2A and their nanoscale adhesion forces in the presence of sulfoxaflor, a successor of neonicotinoid pesticides. This study presents a new tool for in situ single-cell force measurements of various anoxic and anaerobic species and provides new perspectives for evaluating the potential environmental risk of neonicotinoid applications in ecosystems.

Single bubble probe atomic force microscope and impinging-jet technique unravel the interfacial interactions controlled by long chain fatty acid in anaerobic digestion.

Anaerobic digestion of lipid-rich wastewater generally suffers from foaming induced by long chain fatty acid (LCFA). However, a systematic understanding of LCFA inhibition, especially the physical inhibition on interfacial interaction still remains unclear. Here, we combined bubble probe atomic force microscope and impinging-jet technique to unravel the interfacial interactions controlled by long chain fatty acids in anaerobic digestion. We showed that LCFA had a significant inhibition on methane production in anaerobic reactors for the inhibition of the conversion of VFAs to methane. By measuring the LCFA influence on methanogenic archaea Methanosarcina acetivorans C2A, the results demonstrated that methanogenesis was limited for substrates utilization but not metabolic pathways. The impinging-jet technique results indicated that LCFA enhanced bubble separation from anaerobic granules and reduced the bubble-bubble coalescence probability. In addition, the bubble probe atomic force microscope (AFM) revealed that LCFA enhanced the adhesion force between bubbles by enhancing electrical double layer (EDL) repulsion and decreasing hydrophobic interactions. Overall, these results complement framework of LCFA inhibition in anerobic digestion and provide a nanomechanical insight into the fundamental interfacial interactions related to bubbles in anaerobic reactors.

Case report: A compound heterozygous mutations in ARSA associated with adult-onset metachromatic leukodystrophy.

Metachromatic Leukodystrophy (MLD) is a rare autosomal recessive disease, which is caused by mutations in the arylsulfatase A (ARSA) gene. The ARSA gene is located on chromosome 22q13, containing eight exons. According to the age of onset, MLD can be divided into late infantile type, juvenile type, and adult type. Adult MLD has an insidious onset after the age of 16 years. Additionally, intellectual as well as behavioral changes, such as memory deficits or emotional instability, are commonly the first presenting symptoms. There is a study that reported an adult-onset MLD manifested cognitive impairment progressively due to compound heterozygous mutations of NM_000487: c.[185_186dupCA], p.(Asp63GlnfsTer18), and NM_000487: c.[154G>T], p.(Gly172Cys), rs74315271 in the ARSA gene, finding that the c.[154G>T], p.(Gly172Cys) is a novel missense mutation. Brain magnetic resonance imaging (MRI) revealed symmetrical demyelination of white matter. The activity of ARSA enzymatic in leukocytes decreased. Nerve conduction studies displayed that evidence of polyneuropathy was superimposed upon diffuse, uniform demyelinating, and sensorimotor polyneuropathy. Family genes revealed that each family member carried one of two heterozygous mutant genes. She has been discharged and is currently being followed up. This study found a compound heterozygous mutation in the ARSA gene associated with MLD and identified a novel missense mutation NM_000487: c.[154G>T], p.(Gly172Cys), rs74315271. This will provide a critical clue for prenatal diagnosis of the offspring in this family, and expand the mutation spectrum of MLD-related ARSA.

Solvent Modification of the Structures and Magnetic Properties of a Series of Dysprosium(III) Single-Molecule Magnets.

Solvent effects on the structures and magnetic properties of single-molecule magnets (SMMs) have been of great interest for modification of the SMMs using chemical modulation. By systematically varying the reaction solvents (MeOH, ethanol, n-propanol, and n-butanol), we have successfully synthesized a series of DyIII-H4daps complexes (H4daps = N',N‴-[(1E,1'E)-pyridine-2,6-diylbis(ethan-1-yl-1-ylidene)]bis(2-hydroxybenzohydrazide), including two binuclear compounds, [Dy2(H2daps)2(MeOH)4(H2O)2](CF3SO3)2·0.5MeOH (1MeOH) and [Dy2(H2daps)3(EtOH)2]·2EtOH·Et2O (2EtOH), and two mononuclear compounds, [Dy(H4daps)2](CF3SO3)3·n-PrOH (3PrOH) and [Dy(H4daps)(CF3SO3)3(n-BuOH)]·0.5Et2O (4BuOH). Using different solvents, the ligand-to-metal ratios can be adjusted from 1:1 in 1MeOH and 4BuOH to 3:2 in 2EtOH and 2:1 in 3PrOH. Through the solvent crossover experiments, the role of the solvents and the conditions to form these complexes were carefully studied. The size of the different alcohols, their coordination ability to the DyIII center, and the solubility of the complexes in these alcohols might affect the assembly process and lead to modification of the structures and magnetic properties of these DyIII-H4daps complexes. Magnetic studies revealed that these four complexes all exhibit slow magnetic relaxation under a zero or an applied direct-current field, with an energy barrier of about 100 K for the binuclear compound 1MeOH. In combination with theoretical calculations, the magnetic-structure relationship of these four compounds has been analyzed. This work demonstrates the crucial role of different solvent molecules in the fine-tuning of the structures and magnetic performances of different lanthanide complexes.

Characterization of an Endophytic Antagonistic Bacterial Strain Bacillus halotolerans LBG-1-13 with Multiple Plant Growth-Promoting Traits, Stress Tolerance, and Its Effects on Lily Growth.

Microbial inoculants are an important tool for increasing arable land productivity and decreasing mineral fertilizer application. This study was aimed at isolating and identifying endophytic antagonistic bacteria from lily (Lilium davidii var. unicolor) roots grown in Northwestern China and at evaluating their antifungal activity and plant growth-promoting characteristics. For this purpose, endophytic bacteria were isolated from plant roots, and plant growth-promoting strains were identified. One bacterial strain, isolated from the root part, was identified as Bacillus halotolerans based on 16S rRNA gene sequence analysis and was designated as LBG-1-13. The strain showed antagonistic activities against important plant pathogens of lily including Botrytis cinerea, Botryosphaeria dothidea, and Fusarium oxysporum. The highest percentage of growth inhibition, i.e., 71.65 ± 2.39%, was observed for LBG-1-13 against Botryosphaeria dothidea followed by 68.33 ± 4.70% and 48.22 ± 4.11% against Botrytis cinerea and Fusarium oxysporum, respectively. Meanwhile, the isolated strain also showed plant growth-promoting traits such as the production of indole-3-acetic acid (IAA), siderophore, ACC deaminase, and phosphate solubilization activity. The strain showed ACC deaminase activity and was able to cleave 58.41 ± 2.62 nmol α-ketobutyrate (mg protein)-1 min-1. The strain exhibited tolerance to salt and drought stress in an in vitro experiment. The strain LBG-1-13 was able to grow in the presence of 10% NaCl and 20% polyethylene glycol (PEG) in the growth medium. Inoculation of Lilium varieties, Tresor and Bright Diamond, with LBG-1-13 enhanced plant growth under greenhouse and field conditions, respectively. All these results demonstrated that Bacillus halotolerans LBG-1-13 could be utilized as a good candidate in the biocontrol of lily disease and plant growth promotion in sustainable agriculture.

The surface groups of polystyrene nanoparticles control their interaction with the methanogenic archaeon Methanosarcina acetivorans.

A better understanding of the interaction between nanoplastics and archaea is crucial to fill the knowledge gaps regarding the ecological safety of nanoplastics. As a vital source for global methane emissions, methanogenic archaea have unique cell membranes that are distinctly different from those in all other forms of life, little is known about their interaction with nanoplastics. Here, we show that polystyrene nanoparticles functionalized with sulfonic acid (PS-SO3H) and amino (PS-NH2) interact with this methanogenic archaeon in distinct ways. Although both of them have no significant phenotype effects on Methanosarcina acetivorans C2A, these nanoparticles could affect DNA-mediated transposition of this methanogenic archaeon, and PS-SO3H also downregulated nitrogen fixation, nitrogen cycle metabolic process, oxidoreductase activity, etc. In addition, both nanoplastics decreased the protein contents in the extracellular polymer substances (EPS), with distinct binding sequences to the functional groups of the EPS. The single particle atomic force microscopy revealed that the force between the amino group and the M. acetivorans C2A was greater than that of sulfonic acid group. Our results exhibit that the surface groups of polystyrene nanoparticles control their risk on the methanogenic archaea, and these effects might influence their contribution on global methane emission.

miR-188-3p targets skeletal endothelium coupling of angiogenesis and osteogenesis during ageing.

A specific bone capillary subtype, namely type H vessels, with high expression of CD31 and endomucin, was shown to couple angiogenesis and osteogenesis recently. The number of type H vessels in bone tissue declines with age, and the underlying mechanism for this reduction is unclear. Here, we report that microRNA-188-3p (miR-188-3p) involves this process. miRNA-188-3p expression is upregulated in skeletal endothelium and negatively regulates the formation of type H vessels during ageing. Mice with depletion of miR-188 showed an alleviated age-related decline in type H vessels. In contrast, endothelial-specific overexpression of miR-188-3p reduced the number of type H vessels, leading to decreased bone mass and delayed bone regeneration. Mechanistically, we found that miR-188 inhibits type H vessel formation by directly targeting integrin ß3 in endothelial cells. Our findings indicate that miR-188-3p is a key regulator of type H vessel formation and may be a potential therapeutic target for preventing bone loss and accelerating bone regeneration.

Modulating the Structures and Magnetic Properties of Dy(III) Single-Molecule Magnets through Acid-Base Regulation.

Chemical modulation on the structures and physical properties of the coordination complexes is of great interest for the preparation of new functional materials. By changing the acidity or basicity of the reaction medium, the deprotonation degree of a multidentate ligand with multiple active protons, H4daps (H4daps = N',N'″-((1E,1'E)-pyridine-2,6-diylbis(ethan-1-yl-1-ylidene))bis(2-hydroxybenzohydrazide)), can be regulated on purpose. With this ligand of different deprotonation and charges, three new DyIII complexes ([Dy(H3daps)(CH3COO)2(EtOH)]·CH3COOH (1Dy), [Dy2(H2daps)2(EtOH)2(H2O)2(MeOH)2](CF3SO3)2·(H2O)2 (2Dy), and [Dy3(H1daps)2(H2daps)(µ3-OH)(EtOH)(H2O)] (3Dy)) of different nuclearities (mono-, di-, and trinuclear for 1Dy to 3Dy, respectively) have been synthesized and characterized structurally and magnetically. Analyses on the related bond lengths and resulting hydrogen bond modes in the complexes provide the details of the deprotonation position and the charge of the ligands, which can be in the form of H3daps-, H2daps2-, and H1daps3-. Interestingly, the more deprotonated ligand can act as a bridging ligand between the DyIII centers using the phenol and/or carbonyl oxygen atoms, which leads to the multinuclear structures. Magnetic studies on these complexes revealed that complex 1Dy is a field-induced single-molecule magnet (SMM), while complexes 2Dy and 3Dy show SMM behavior under a zero dc field.